Compare

Compare Equipment Go Back

Engine
	903D Compact Wheel Loader View Product	990 Wheel Loader View Product Remove	980 View Product Remove	988 XE Wheel Loader View Product Remove
Maximum Gross Power	42 HP	-	-	-
Engine Model	Cat C2.4*	C27 Cat®	Cat C13	Cat® C18 ™
Gross Power	42 HP	-	-	-
Net Power - 2,200 rpm - SAE J1349 R-ing	40 HP	-	-	-
Net Power - 2,200 rpm - ISO 9249 R-ing	40 HP	-	-	-
Bore	3.4 in	5.4 in	-	5.7 in
Stroke	4 in	6 in	-	7.2 in
Displacement	147 in²	1649.5 in³	12.5 L	1105 in³
Note	*Engine meets U.S. EPA Tier 4 Final emission standards.	-	-	-
Rated Speed	-	1,800/min	-	1,700 rpm
Engine Power - ISO 14396	-	752 HP	-	-
Gross Power - SAE J1995	-	766 HP	-	-
Net Power - SAE J1349 - Standard Ambient	-	699 HP	-	-
Net Power - SAE J1349 - High Ambient	-	648 HP	-	-
Peak Torque - 1,200 rpm	-	2624 lb/ft	-	-
Torque Rise	-	18 %	-	58%
Emissions	-	U.S. EPA TIer 4 Final and EU Stage V emission standards or U.S. EPA Tier 2 and EU Stage II equivalent	-	U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014
Net Power @ 1,700 rpm – ISO 9249:2007, SAE J1349:2011	-	-	393 HP	-
Note (1)	-	-	Cat engine meets U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V, China Nonroad Stage IV and Japan 2014 emission standards.	-
Note (2)	-	-	The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner, and aftertreatment.	-
Gross Torque @ 1,200 rpm – SAE J1995:2014	-	-	1627 lb/ft	-
Engine Torque @ 1,200 rpm – ISO 14396:2002	-	-	1612 lb/ft	-
Gross Power @ 1,700 rpm – SAE J1995:2014	-	-	425 HP	-
Net Torque @ 1,100 rpm – ISO 9249:2007, SAE J1349:2011	-	-	1539 lb/ft	-
Engine Power @ 1,700 rpm – ISO 14396:2002	-	-	429 HP	-
Note (3)	-	-	Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: • 20% biodiesel FAME (fatty acid methyl ester)* • 100% renewable diesel, HVO (h	-
Net Power - SAE J1349	-	-	-	538 HP
Engine Power - ISO 14396:2002	-	-	-	580 HP
Gross Power - SAE J1995:2014	-	-	-	588 HP
Peak Power Speed	-	-	-	1,500 rpm
Peak Torque - 1,200 rpm - SAE J1995	-	-	-	2230 ft·lbf
Weights
Operating Weight	9414 lb	-	66877 lb	-
Note	-	-	Weight based on a machine configuration with Bridgestone 29.5R25 VSNT L4 radial tires, full fluids, operator, standard counterweight, ride control cold start, roading fenders, Product Link, open differential axles (front/rear), secondary steering, sound s	-
Buckets
Bucket Capacities	0.6-1.0 m3 (0.8-1.3 yd3)	8.6 m³ – 10.0 m³ (11.25 yd³ – 13.0 yd³)	-	4.7-13 m3 (6.2-17 yd3)
Bucket Capacities - General Purpose	0.6 m3 (0.8 yd3)	-	-	-
Bucket Capacities - Light Material	1.0 m3 (1.3 yd3)	-	-	-
Transmission
Travel Speed	12.4 mile/h	-	-	-
Transmission Type	-	Cat planetary power shift	-	Cat switched reluctance electric drive
Forward - 1	-	4.5 mile/h	4.3 mile/h	-
Forward - 2	-	8.3 mile/h	8.3 mile/h	-
Forward - 3	-	14.2 mile/h	14.6 mile/h	-
Reverse - 1	-	4.9 mile/h	4.8 mile/h	-
Reverse - 2	-	9.1 mile/h	9.4 mile/h	-
Reverse - 3	-	15.5 mile/h	16.7 mile/h	-
Direct Drive - Forward 1	-	Lock-up disabled	-	-
Direct Drive - Forward 2	-	8.5 mile/h	-	-
Direct Drive - Forward 3	-	15.2 mile/h	-	-
Direct Drive - Reverse 1	-	5.4 mile/h	-	-
Direct Drive - Reverse 2	-	9.6 mile/h	-	-
Direct Drive - Reverse 3	-	16.4 mile/h	-	-
Note	-	Travel speeds based on Michelin 45/65R39 LD D2**L5 tires.	Maximum travel speed in standard vehicle with empty bucket and standard L4 tires with 935 mm (37 in) roll radius.	-
Forward - 4	-	-	24.5 mile/h	-
Reverse - 4	-	-	24.5 mile/h	-
Forward 1 (virtual)	-	-	-	4.3 mile/h
Forward 2 (virtual)	-	-	-	7 mile/h
Forward 3 (virtual)	-	-	-	13.8 mile/h
Forward 4 (virtual)	-	-	-	20 mile/h
Reverse 1 (virtual)	-	-	-	4.3 mile/h
Reverse 2 (virtual)	-	-	-	7 mile/h
Reverse 3 (virtual)	-	-	-	17.5 mile/h
Hydraulic System
Main Relief	3481 psi	-	-	-
3rd Auxiliary Flow	14 gal/min	-	-	-
Hydraulic Cycle Time - Lower, Float	2.4 s	-	-	-
Implement System - Maximum Operating Pressure	-	-	4975 psi	-
Implement System - Maximum Pump Output at 2,250 rpm	-	-	119 gal/min	-
Loader Hydraulic System
Hydraulic Cycle Time - Lift	4.4 s	-	-	-
Hydraulic Cycle Time - Dump	0.7 s	-	-	-
Cab
ROPS	ISO 3471:2008	-	-	-
FOPS	ISO 3449:2005 Level I	-	-	-
Service Refill Capacities
Cooling System	3 gal (US)	54.9 gal (US)	13.7 gal (US)	-
Fuel Tank	11.4 gal (US)	294.3 gal (US)	112.5 gal (US)	147 gal (US)
Hydraulic System	6.3 gal (US)	-	-	-
Engine Oil	2.4 gal (US)	-	-	-
Engine Crankcase	-	20 gal (US)	-	16 gal (US)
Transmission	-	29.1 gal (US)	20.3 gal (US)	16 gal (US)
Differential - Final Drives - Front	-	71.6 gal (US)	22.2 gal (US)	49 gal (US)
Differential - Final Drives - Rear	-	68.9 gal (US)	22.4 gal (US)	49 gal (US)
Hydraulic System Factory Fill	-	210 gal (US)	-	-
Hydraulic Tank - Implement and Hydraulic Fan	-	68.9 gal (US)	-	-
Hydraulic Tank - Steering and Braking	-	34.9 gal (US)	-	-
Note	-	All nonroad U.S. EPA Tier 4 diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm (mg/kg) sulfur or less. Biodiesel blends up to B20 (20% blend by volume) are acceptable when blended with 15 ppm (mg/kg) sulfur or l	-	All nonroad Tier 4 Final/Stage V diesel engines are required to use: – The machine has the flexibility to run on either ultra-low-sulfur diesel fuel (ULSD with 15 ppm of sulfur or less). – Cat engines are compatible with the following renewable, alternati
Crankcase	-	-	9.8 gal (US)	-
DEF Tank	-	-	5.5 gal (US)	-
Hydraulic Tank	-	-	40.4 gal (US)	-
Cooling System - Jacket Water	-	-	-	30 gal (US)
Cooling Systems - Power Train	-	-	-	8 gal (US)
Diesel Exhaust Fluid Tank	-	-	-	8.7 gal (US)
Hydraulic System - Implement/Steering	-	-	-	126 gal (US)
Dimensions (Approximate) - Standard Lift
Cab Height	8.25 ft	-	-	-
Ground Clearance	10 in	-	-	-
Wheel Base	6.42 ft	-	-	14.9 ft
Overall Length - With Bucket*	15.75 ft	-	-	-
Reach at Maximum Dump Height*	2.33 ft	-	-	-
Dig Depth	6 in	-	-	-
Maximum Dump Height*	7.5 ft	-	-	-
Load Over Height	9.17 ft	-	-	-
Hinge Pin at Maximum Height	10.08 ft	-	-	-
Departure Angle - Degrees	30°	-	-	-
Overall Length - With Forks	17.08 ft	-	-	-
Reach - Ground Level	2.67 ft	-	-	-
Maximum Reach	4.5 ft	-	-	-
Fork Depth Above Ground	2 in	-	-	-
Fork Height at Maximum Reach	4.67 ft	-	-	-
Maximum Fork Height	9.83 ft	-	-	-
Fork Reach at Maximum Height	2 ft	-	-	-
Turning Radius - Over Bucket*	13.17 ft	-	-	-
Turning Radius - Inside Tire**	5.92 ft	-	-	-
Width - Over Bucket*	5.83 ft	-	-	-
Tire Gauge	4.33 ft	-	-	-
Machine Width**	5.58 ft	-	-	-
Articulation Angle	40°	-	-	-
Steering Angle	80°	-	-	-
Dump Angle at Maximum Height	40°	-	-	-
Note (1)	*Vary with bucket size.	-	-	-
Note (2)	**Vary with tire size.	-	-	-
Note (3)	Dimensions listed are based on the machine configured with cab with air conditioning, remote quick coupler, general purpose bucket or 1067 mm (42 in) forks, 75 kg (165 lb) operator, 33 × 15.5-16.5, 12 PR tires, without ride control, without precleaner.	-	-	-
Ground to Top of ROPS	-	-	-	13.8 ft
Ground to Top of Exhaust Stacks	-	-	-	14.8 ft
Ground to Top of Hood	-	-	-	10.9 ft
Ground to Bumper Clearance	-	-	-	3.1 ft
Rear Axle - Centerline to Bumper	-	-	-	10.5 ft
Front Axle Centerline to Bucket Tip	-	-	-	14 ft
Maximum Overall Length	-	-	-	39.3 ft
Ground to Lower Hitch Clearance	-	-	-	1.9 ft
Ground to Center of Axles	-	-	-	3.2 ft
Clearance at Maximum Lift	-	-	-	11.9 ft
B-Pin Height - Maximum Lift	-	-	-	18 ft
Maximum Overall Height - Bucket Raised	-	-	-	24.5 ft
Reach - Maximum Lift	-	-	-	6.5 ft
Note	-	-	-	Specs are calculated with 6.9 m3 (9.0 yd3) rock bucket and Michelin XLDD2 with 978 mm (3.2 ft) centerline of rear axle height.
Dimensions (Approximate) - High Lift
Cab Height	8.25 ft	-	-	-
Ground Clearance	10 in	-	-	-
Wheel Base	6.42 ft	-	-	14.9 ft
Overall Length - With Bucket*	16.17 ft	-	-	-
Reach at Maximum Dump Height*	2.42 ft	-	-	-
Dig Depth	8 in	-	-	-
Maximum Dump Height*	8 ft	-	-	-
Load Over Height	9.67 ft	-	-	-
Hinge Pin at Maximum Height	10.58 ft	-	-	-
Departure Angle - Degrees	30°	-	-	-
Overall Length - With Forks	17.58 ft	-	-	-
Reach - Ground Level	3.25 ft	-	-	-
Maximum Reach	4.92 ft	-	-	-
Fork Depth Above Ground	2 in	-	-	-
Fork Height at Maximum Reach	4.67 ft	-	-	-
Maximum Fork Height	10.33 ft	-	-	-
Fork Reach at Maximum Height	2 ft	-	-	-
Turning Radius - Over Bucket*	13.42 ft	-	-	-
Turning Radius - Inside Tire**	5.92 ft	-	-	-
Width - Over Bucket*	5.83 ft	-	-	-
Tire Gauge	4.33 ft	-	-	-
Machine Width**	5.58 ft	-	-	-
Articulation Angle	40°	-	-	-
Steering Angle	80°	-	-	-
Dump Angle at Maximum Height	40°	-	-	-
Note (1)	*Vary with bucket size.	-	-	-
Note (2)	**Vary with tire size.	-	-	-
Note (3)	Dimensions listed are based on the machine configured with cab with air conditioning, remote quick coupler, general purpose bucket or 1067 mm (42 in) forks, 75 kg (165 lb) operator, 33 × 15.5-16.5, 12 PR tires, without ride control, without precleaner.	-	-	-
Ground to Top of ROPS	-	-	-	13.8 ft
Ground to Top of Exhaust Stacks	-	-	-	14.8 ft
Ground to Top of Hood	-	-	-	10.9 ft
Ground to Bumper Clearance	-	-	-	3.1 ft
Rear Axle - Centerline to Bumper	-	-	-	10.5 ft
Front Axle Centerline to Bucket Tip	-	-	-	15.3 ft
Maximum Overall Length	-	-	-	40.7 ft
Ground to Lower Hitch Clearance	-	-	-	1.9 ft
Ground to Center of Axles	-	-	-	3.2 ft
Clearance at Maximum Lift	-	-	-	13.3 ft
B-Pin Height - Maximum Lift	-	-	-	19.3 ft
Maximum Overall Height - Bucket Raised	-	-	-	25.8 ft
Reach - Maximum Lift	-	-	-	6.8 ft
Note	-	-	-	Specs are calculated with 6.9 m3 (9.0 yd3) rock bucket and Michelin XLDD2 with 978 mm (3.2 ft) centerline of rear axle height.
Operating Specifications - Standard Lift
Tire Size	33 × 15.5-16.5, 12 PR	-	-	-
Rated Bucket Capacity	0.8 yd³	-	-	-
Breakout Force	6160 lbf	-	-	-
Operating Weight	9414 lb	-	-	-
Rated Operating Load at Full Turn - Bucket***	2701 lb	-	-	-
Straight Tipping Load - Bucket***	6415 lb	-	-	-
Full Turn Static Tipping Load - Bucket (ISO 14397-1)**	5401 lb	-	-	-
Full Turn Static Tipping Load - Bucket (Rigid Tire)*	5512 lb	-	-	-
Rack Back - Transport Position	51°	-	-	-
Rated Operating Load at Full Turn - Forks (EN 474-3:2006, Firm and Level Ground, 500 mm [20 in] Load Center) (80% FTSTL)***	3366 lb	-	-	-
Rated Operating Load at Full Turn - Forks (EN 474-3:2006, Rough Terrain, 500 mm [20 in] Load Center) (60% FTSTL)***	2524 lb	-	-	-
Note (1)	*Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification be-tween calculation and testing.	-	-	-
Note (2)	**Compliance to ISO 14397-1 (2007) Sections 1 thru 5.	-	-	-
Note (3)	***Manual quick coupler, precleaner hood.	-	-	-
Note (4)	Operating specifications shown are based on machine equipped with enclosed ROPS cab with air conditioning, remote quick coupler, 75 kg (165 lb) operator and general purpose bucket (GP), without ride control, without precleaner unless otherwise noted.	-	-	-
Operating Specifications - High Lift
Tire Size	33 × 15.5-16.5, 12 PR	-	-	-
Rated Bucket Capacity	0.8 yd³	-	-	-
Breakout Force	6204 lbf	-	-	-
Operating Weight	9462 lb	-	-	-
Rated Operating Load at Full Turn - Bucket***	2502 lb	-	-	-
Straight Tipping Load - Bucket***	5975 lb	-	-	-
Full Turn Static Tipping Load - Bucket (ISO 14397-1)**	5004 lb	-	-	-
Full Turn Static Tipping Load - Bucket (Rigid Tire)*	5115 lb	-	-	-
Rack Back - Transport Position	51°	-	-	-
Rated Operating Load at Full Turn - Forks (EN 474-3:2006, Firm and Level Ground, 500 mm [20 in] Load Center) (80% FTSTL)***	3148 lb	-	-	-
Rated Operating Load at Full Turn - Forks (EN 474-3:2006, Rough Terrain, 500 mm [20 in] Load Center) (60% FTSTL)***	2361 lb	-	-	-
Note (1)	*Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification be-tween calculation and testing.	-	-	-
Note (2)	**Compliance to ISO 14397-1 (2007) Sections 1 thru 5.	-	-	-
Note (3)	***Manual quick coupler, precleaner hood.	-	-	-
Note (4)	Operating specifications shown are based on machine equipped with enclosed ROPS cab with air conditioning, remote quick coupler, 75 kg (165 lb) operator and general purpose bucket (GP), without ride control, without precleaner unless otherwise noted.	-	-	-
Maximum Material Densities - General Purpose
Bucket Type	General Purpose	-	-	-
Rated Capacity	0.8 yd³	-	-	-
Dump Height	90 in	-	-	-
Maximum Material Density	3169 lb/yd³	-	-	-
Bucket Width	70 in	-	-	-
Note	Based on ISO 7546:1983 and rated operating loads at full turn and standard linkage.	-	-	-
Maximum Material Densities - Light Material
Bucket Type	Light Material	-	-	-
Rated Capacity	1.3 yd³	-	-	-
Dump Height	85 in	-	-	-
Maximum Material Density	1989 lb/yd³	-	-	-
Bucket Width	74 in	-	-	-
Note	Based on ISO 7546:1983 and rated operating loads at full turn and standard linkage.	-	-	-
Sustainability
Recyclability	97%	-	-	96%
Operating Specifications
Operating Weight	-	178517 lb	-	116362 lb
Rated Payload - Standard	-	17.5 ton (US)	-	-
Rated Payload - High Lift	-	17.5 ton (US)	-	-
Bucket Capacity Range	-	8.6 m³ – 10.0 m³ (11.25 yd³ – 13.0 yd³)	-	4.7-13 m3 (6.2-17 yd3)
Cat Truck Match - Standard	-	773-775	-	-
Cat Truck Match - High Lift	-	775-777	-	-
Breakout Force	-	-	51008 lb	-
Note (1)	-	-	For a machine configuration as defined under �Weight.�	-
Note (2)	-	-	Full compliance to ISO 14397-1:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing.	-
Static Tipping Load - Full 40° Turn - No Tire Deflection	-	-	20965 kg	-
Static Tipping Load - Full 40° Turn - With Tire Deflection	-	-	43432 lb	-
Operating Weight - Standard	-	-	-	116362 lb
Operating Weight - High Lift	-	-	-	119618 lb
Rated Payload - Standard (Quarry Face)	-	-	-	12.5 ton (US)
Rated Payload - Loose Material (Standard)	-	-	-	16 ton (US)
Hydraulic System - Lift/Tilt
Lift/Tilt System - Circuit	-	Positive flow control	-	EH-Positive Flow Control, Flow Sharing
Lift/Tilt System	-	Variable displacement piston	-	-
Maximum Flow at 1,800 rpm (1)	-	240 gal/min	-	-
Cylinders, Double Acting - Lift, Bore and Stroke	-	235 mm × 1287 mm (9.3 in × 50.7 in)	-	-
Cylinders, Double Acting - Tilt, Bore and Stroke	-	292.1 mm × 820 mm (11.5 in × 32.3 in)	-	-
Pilot System	-	Open loop and pressure reducing	-	-
Relief Valve Setting - Main	-	507 psi	-	-
Relief Valve Setting - Lift/Tilt	-	4786 psi	-	4757 psi
Lift/Tilt System - Pump	-	-	-	Variable displacement piston
Maximum Flow at 1,400-1,600 rpm	-	-	-	153 gal/min
Lift Cylinder - Bore	-	-	-	8.7 in
Lift Cylinder - Stroke	-	-	-	41.3 in
Tilt Cylinder - Bore	-	-	-	8.7 in
Tilt Cylinder - Stroke	-	-	-	27 in
Hydraulic Cycle Times
Rack Back	-	4.3 s	-	4.5 s
Raise	-	8.2 s	-	8 s
Dump	-	2.9 s	-	2.2 s
Lower	-	3.7 s	-	-
Lower Float Down	-	3.6 s	-	3.5 s
Total Hydraulic Cycle Time - Empty Bucket	-	13.8 s	-	-
Total Hydraulic Cycle Time	-	-	-	18.2 s
Hydraulic System - Steering
Steering System - Circuit	-	Pilot, load sensing	-	Pilot, load sensing
Steering System - Pump	-	Piston, variable displacement	-	Piston, variable displacement
Maximum Flow at 1,400 rpm	-	96.2 gal/min	-	-
Relief Valve Setting - Steering	-	5004 psi	-	-
Total Steering Angle	-	70°	-	86°
Maximum Flow at 1,400-1,600 rpm	-	-	-	71.3 gal/min
Steering Cut Off Pressure	-	-	-	4351 psi
Steering Cycle Times - High Idle	-	-	-	3.4 s
Steering Cycle Times - Low Idle	-	-	-	5.6 s
Air Conditioning System
Air Conditioning	-	The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 2.7 kg of refrigerant which has a CO2 equivalent of 3.861 metric tonnes (4.256 tons).	The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.9 kg (4.2 lb) of refrigerant which has a CO2 equivalent 2.717 metric tonnes (2.995 tons).	The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes.
Axles
Front	-	Fixed	-	Fixed
Rear	-	Trunnion	-	Trunnion
Oscillation Angle	-	8.5°	-	13°
Brakes
Brakes	-	ISO 3450: 2011	-	ISO 3450:2011
Sound Performance - Standard
Operator Sound Level (ISO 6396:2008)	-	65.5 dB(A)	-	-
Machine Sound Level (ISO 6395:2008)	-	115 dB(A)	-	-
Sound Performance - Suppression
Operator Sound Level (ISO 6396:2008)	-	65.5 dB(A)	-	-
Machine Sound Level (ISO 6395:2008)	-	113 dB(A)	-	-
Bucket Capacities
Bucket Range	-	-	4.0-14.5 m³ 5.25-19 yd³	-
Sound
Note (1)	-	-	** For machines in European Union countries and in countries that adopt the �EU Directives.�	-
Note (2)	-	-	***European Union Directive �2000/14/EC� as amended by �2005/88/EC.�	-
With Cooling Fan Speed at 70% of Maximum Value - Exterior Sound Power Level*	-	-	109	-
With Cooling Fan Speed at 70% of Maximum Value - Operator Sound Pressure Level (ISO 6396:2008)	-	-	72 dB(A)	-
With Cooling Fan Speed at Maximum Speed - Exterior Sound Power Level (ISO 6395:2008)	-	-	112 dB(A)	-
With Cooling Fan Speed at Maximum Speed - Exterior Sound Pressure Level (SAE J88:2013)	-	-	78	-
With Cooling Fan Speed at Maximum Speed - Operator Sound Pressure Level (ISO 6396:2008)	-	-	72 dB(A)	-
Dimensions
Note	-	-	All dimensions are approximate and based on machine equipped with 5.4 m3 (7.1 yd3) general purpose bucket with BOCE and Bridgestone 29.5R25 VSNT L4 radial tires.	-
Dimensions - High Lift
Centerline of Rear Axle to Edge of Counterweight	-	-	8.9 ft	-
Centerline of Rear Axle to Hitch	-	-	6.3 ft	-
Ground Clearance	-	-	1.5 ft	-
Height - Top of Exhaust Pipe	-	-	12.5 ft	-
Height - Top of Hood	-	-	10.1 ft	-
Height - Top of ROPS	-	-	12.7 ft	-
Hinge Pin Height at Carry	-	-	2.2 ft	-
Hinge Pin Height at Maximum Lift	-	-	15.7 ft	-
Lift Arm Clearance at Maximum Lift	-	-	13.6 ft	-
Overall Length - Without Bucket	-	-	27.5 ft	-
Tread Width	-	-	8 ft	-
Wheel Base	-	-	12.6 ft	-
Rack Back at Ground	-	-	40 degrees	-
Width over Tires (Loaded)	-	-	10.9 ft	-
Rack Back - Carry Height	-	-	50 degrees	-
Rack Back - Maximum Lift	-	-	61 degrees	-
Dimensions - Standard Lift
Centerline of Rear Axle to Hitch	-	-	6.3 ft	-
Ground Clearance	-	-	456 mm	-
Height - Top of Exhaust Pipe	-	-	3764 mm	-
Height - Top of Hood	-	-	3064 mm	-
Height - Top of ROPS	-	-	3829 mm	-
Hinge Pin Height at Carry	-	-	2.2 ft	-
Hinge Pin Height at Maximum Lift	-	-	4554 mm	-
Lift Arm Clearance at Maximum Lift	-	-	3881 mm	-
Overall Length - Without Bucket	-	-	8155 mm	-
Tread Width	-	-	8 ft	-
Wheel Base	-	-	3800 mm	-
Rack Back at Ground	-	-	40 degrees	-
Centerline of Rear Axle to Edge of Counterweight	-	-	2661 mm	-
Width over Tires (Loaded)	-	-	10.9 ft	-
Rack Back - Carry Height	-	-	50 degrees	-
Rack Back - Maximum Lift	-	-	61 degrees	-
Operator's Cab
ROPS/FOPS	-	-	-	ROPS/FOPS meet ISO 3471:2008 and ISO 3449:2005 Level II standards
Sound Performance - Tier 4 Final / Stage V - Standard
Operator Sound Pressure Level (ISO 6396:2008)	-	-	-	72 dB(A)
Machine Sound Power Level (ISO 6395:2008)	-	-	-	109 dB(A)
Sound Performance - Tier 3 / Stage III - Standard
Operator Sound Pressure Level (ISO 6396:2008)	-	-	-	72 dB(A)
Machine Sound Power Level (ISO 6395:2008)	-	-	-	110 dB(A)
Dimensions - Millyard Linkage
Ground to Top of ROPS	-	-	-	13.8 ft
Ground to Top of Exhaust Stacks	-	-	-	13.8 ft
Ground to Top of Hood	-	-	-	10.9 ft
Ground to Bumper Clearance	-	-	-	3.1 ft
Rear Axle - Centerline to Bumper	-	-	-	10.5 ft
Front Axle Centerline to Fork Tip	-	-	-	16.5 ft
Wheel Base	-	-	-	14.9 ft
Maximum Overall Length	-	-	-	41.9 ft
Ground to Lower Hitch Clearance	-	-	-	1.9 ft
Ground to Center of Front Axle	-	-	-	3.2 ft
Fork Height with Level Arms	-	-	-	8.1 ft
Fork Top Clamp Opening	-	-	-	13.1 ft
Fork Height at Maximum Lift	-	-	-	17.2 ft
Hinge Pin Height at Maximum Lift	-	-	-	16.1 ft
Dump Angle at Maximum Lift	-	-	-	-39.4 °

Compare Equipment Go Back

903D Compact Wheel Loader

990 Wheel Loader

980

988 XE Wheel Loader

Engine

Weights

Buckets

Transmission

Hydraulic System

Loader Hydraulic System

Cab

Service Refill Capacities

Dimensions (Approximate) - Standard Lift

Dimensions (Approximate) - High Lift

Operating Specifications - Standard Lift

Operating Specifications - High Lift

Maximum Material Densities - General Purpose

Maximum Material Densities - Light Material

Sustainability

Operating Specifications

Hydraulic System - Lift/Tilt

Hydraulic Cycle Times

Hydraulic System - Steering

Air Conditioning System

Axles

Brakes

Sound Performance - Standard

Sound Performance - Suppression

Bucket Capacities

Sound

Dimensions

Dimensions - High Lift

Dimensions - Standard Lift

Operator's Cab

Sound Performance - Tier 4 Final / Stage V - Standard

Sound Performance - Tier 3 / Stage III - Standard

Dimensions - Millyard Linkage