Compare

Compare Equipment Go Back

Engine
	AD63 Underground Articulated Truck View Product	R3000H Underground Mining Loader View Product Remove	AD45 Underground Articulated Truck View Product Remove
Engine Model	Cat® C27	Cat® C15	Cat® C18
Engine Power - EU Stage V Engine - ISO 14396:2002	795 HP	-	598 HP
Bore	5.4 in	5.4 in	5.7 in
Stroke	6 in	6.8 in	7.2 in
Displacement	1650 in²	927.6 in³	1104.53 in³
Note (1)	Meets EU Stage V emission standards and U.S. EPA Tier 4 Final.	Power ratings apply at a rated speed of 1,800 rpm when tested under the reference conditions for the specified standard.	Power ratings apply at a rated speed of 2,000 rpm when tested under the reference conditions for the specified standard.
Note (2)	Power ratings apply at a rated speed of 1,800 rpm when tested under the reference conditions for the specified standard.	All rating conditions are based on ISO/TR 14396:2002, inlet air standard conditions with a total barometric pressure of 100 kPa (29.5 in Hg), with a vapor pressure of 1 kPa (0.295 in Hg), and 25° C (77° F). Performance measured using fuel to EPA specifica	All rating conditions are based on ISO/TR14396:2002, inlet air standard conditions with a total barometric pressure of 100 kPa (29.5 in Hg), with a vapor pressure of 1 kPa (0.295 in Hg), and 25° C (77° F). Performance measured using fuel to EPA specificat
Note (3)	All rating conditions are based on ISO/TR14396, inlet air standard conditions with a total barometric pressure of 100 kPa (29.5 in Hg), with a vapor pressure of 1 kPa (0.295 in Hg), and 25° C (77° F). Performance measured using fuel to EPA specifications	No engine derating required up to 3050 m (10,006 ft) altitude for equivalent Tier 3 engines, and 3506 m (11,502 ft) for VR engines.	Minimal engine derating* required up to 3048 m (10,000 ft) @ rated speed for Stage V engines, 2700 m (8,858 ft) for Tier 3/Stage IIIA equivalent engines and 3505 m (11,500 ft) for Tier 2/Stage II equivalent VR engines.
Engine Power - Tier 3 Engine - ISO 14396:2002	-	401 HP	581 HP
Engine Power - VR Engine - ISO 14396:2002	-	401 HP	581 HP
Note (4)	-	Optional Ventilation Reduction package available.	Optional Ventilation Reduction Package available.
Note (5)	-	Optional engine with emissions equivalent to U.S. EPA Tier 3 and EU stage IIIA is also available.	Optional engine with emissions equivalent to Tier 3 and Stage IIIA is also available.
Note (6)	-	-	Optional engine available that meets U.S. EPA Tier 4 Final and EU Stage V emission standards.
Note (7)	-	-	*<5 %
Operating Specifications
Nominal Payload Capacity	138891 lb	44092 lb	99208 lb
Gross Machine Operating Mass	262218 lb	-	-
Body Capacities	26.9-38.3 m³ (35.2-50.1 yd³)	-	18.0-25.1 m³ (23.5-32.8 yd³)
Gross Machine Mass	-	180779 lb	196765 lb
Static Tipping Load - Straight Ahead - Lift Arms Horizontal	-	104199 lb	-
Static Tipping Full Turn Ahead Lift Arms Horizontal	-	88191 lb	-
Breakout Force - SAE	-	61773 lb	-
Shipping Mass (Stage V Engine Model)	-	-	96225 lb
Shipping Mass (Other Engine Models)	-	-	94415 lb
Weights
Empty	115577 lb	-	-
Empty - Front Axle	81716 lb	-	-
Empty - Rear Axle	33861 lb	-	-
Loaded	254468 lb	-	-
Loaded - Front Axle	126669 lb	-	-
Loaded - Rear Axle	127800 lb	-	-
Operating Mass*	-	128448 lb	-
Operating Mass* - Front Axle	-	54558 lb	-
Operating Mass* - Rear Axle	-	73853 lb	-
Operating Mass + Rated Payload*	-	172540 lb	-
Operating Mass + Rated Payload* - Front Axle	-	125187 lb	-
Operating Mass + Rated Payload* - Rear Axle	-	47316 lb	-
Note	-	*Calculated weight.	-
Weight Distribution
Empty - Front Axle	70.7%	-	-
Empty - Rear Axle	29.3%	-	-
Loaded - Front Axle	49.8%	-	-
Loaded - Rear Axle	50.2%	-	-
Transmission
Forward - 1	4.1 mile/h	3 mile/h	4.4 mile/h
Forward - 2	5.7 mile/h	5.7 mile/h	5.9 mile/h
Forward - 3	7.7 mile/h	10.2 mile/h	8 mile/h
Forward - 4	10.3 mile/h	17.5 mile/h	10.8 mile/h
Forward - 5	14 mile/h	-	14.6 mile/h
Forward - 6	18.9 mile/h	-	19.7 mile/h
Forward - 7	25.5 mile/h	-	26.4 mile/h
Reverse - 1	5.3 mile/h	4.1 mile/h	4.2 mile/h
Note	Maximum travel speeds with standard 35 × 65 R33 tires.	-	Maximum travel speeds with standard 29.5 × R29 tires.
Reverse - 2	-	7.1 mile/h	5.6 mile/h
Reverse - 3	-	12.7 mile/h	-
Reverse - 4	-	19.4 mile/h	-
Final Drives
Differential Ratio	3.46:1	-	3.46:1
Final Drive Ratio	5.5:1	-	5.65:1
Total Reduction Ratio	19.04:1	-	19.55:1
Body Hoist
Raise	13 s	-	-
Lower	24 s	-	-
Total Cycle Time	37 s	-	-
Body Capacities
Dump Body - 1 - Standard	35.2 yd³	-	-
Dump Body - 2	42.6 yd³	-	-
Dump Body - 3	44.2 yd³	-	32.8 yd³
Dump Body - 4	47.9 yd³	-	-
Dump Body - 5 (Light Material)	50.1 yd³	-	-
Note	Heaped SAE 2:1.	-	Heaped SAE 2:1.
Dump Body - 1	-	-	23.6 yd³
Dump Body - 2 - Standard	-	-	27.9 yd³
Ejector Body	-	-	29.9 yd³
Turning Dimensions
Outside Clearance Radius	393.9 in	-	-
Inside Turn Radius	218.1 in	-	-
Frame Oscillation	10°	-	10°
Articulation Angle	42.5 °	42.5 °	42.5°
Outside Clearance Radius**	-	296.7 in	-
Inner Clearance Radius**	-	127.8 in	-
Axle Oscillation	-	8 °	-
Note	-	**Clearance dimensions are for reference only.	*Clearance dimensions are for reference only.
Outside Clearance Radius*	-	-	371 in
Inside Clearance Radius*	-	-	209 in
Service Refill Capacities
Engine Crankcase - With Filter	25 gal (US)	-	16.9 gal (US)
Transmission	14 gal (US)	16.4 gal (US)	15.9 gal (US)
Hydraulic Tank	100.6 gal (US)	37 gal (US)	70.3 gal (US)
Cooling System	39.6 gal (US)	19.8 gal (US)	22.5 gal (US)
Front Differential and Final Drives	36.5 gal (US)	31.4 gal (US)	20.3 gal (US)
Rear Differential and Final Drives	36.5 gal (US)	33.5 gal (US)	21.9 gal (US)
Fuel Tank	237.7 gal (US)	406.5 gal (US)	201.8 gal (US)
Engine Crankcase	-	9 gal (US)	-
Front Differential and Final Drives - With Axle Oil Cooling System	-	42 gal (US)	-
Rear Differential and Final Drives - With Axle Oil Cooling System	-	44.1 gal (US)	-
Tires
Tire Size	35 × 65 R33	35/65 R33	29.5 × R29
Standards
Standards	ROPS/FOPS Certified Cab	Rollover Protective Structure (ROPS)/Falling Object Protective Structure (FOPS) Certified Cab	ROPS/FOPS Certified Cab
Bucket Capacities
Bucket Capacities	-	8.9-11.6 m³ (11.6-15.2 yd³)	-
Dump Bucket - 1 - Standard Bucket	-	11.6 yd³	-
Dump Bucket - 2	-	12.4 yd³	-
Dump Bucket - 3	-	13.7 yd³	-
Light Material Bucket	-	15.2 yd³	-
Hydraulic Cycle Times
Raise	-	8.8 s	-
Dump	-	1.85 s	-
Lower, Empty, Float Down	-	3.54 s	-
Total Cycle Time	-	14.2 s	-
Weights (Stage V Engine Model)
Operating Mass	-	-	91285 lb
Operating Mass - Front Axle	-	-	64565 lb
Operating Mass - Rear Axle	-	-	26720 lb
Operating Mass + Rated Payload	-	-	190495 lb
Operating Mass + Rated Payload - Front Axle	-	-	89235 lb
Operating Mass + Rated Payload - Rear Axle	-	-	101260 lb
Weights (Other Engine Models)
Operating Mass	-	-	88320 lb
Operating Mass - Front Axle	-	-	61225 lb
Operating Mass - Rear Axle	-	-	27095 lb
Operating Mass + Rated Payload	-	-	187530 lb
Operating Mass + Rated Payload - Front Axle	-	-	85355 lb
Operating Mass + Rated Payload - Rear Axle	-	-	102175 lb
Weight Distribution (Stage V Engine Model)
Empty - Front Axle	-	-	70.7%
Empty - Rear Axle	-	-	29.3%
Loaded - Front Axle	-	-	46.8%
Loaded - Rear Axle	-	-	53.2%
Weight Distribution (Other Engine Models)
Empty - Front Axle	-	-	69.3%
Empty - Rear Axle	-	-	30.7%
Loaded - Front Axle	-	-	45.5%
Loaded - Rear Axle	-	-	54.5%
Body Hoist (Stage V Engine Model)
Raise	-	-	15 Seconds
Lower	-	-	21 Seconds
Total Cycle Time	-	-	36 Seconds
Body Hoist (Other Engine Models)
Raise	-	-	14 Seconds
Lower	-	-	21 Seconds
Total Cycle Time	-	-	35 Seconds

Compare Equipment Go Back

AD63 Underground Articulated Truck

R3000H Underground Mining Loader

AD45 Underground Articulated Truck

Engine

Operating Specifications

Weights

Weight Distribution

Transmission

Final Drives

Body Hoist

Body Capacities

Turning Dimensions

Service Refill Capacities

Tires

Standards

Bucket Capacities

Hydraulic Cycle Times

Weights (Stage V Engine Model)

Weights (Other Engine Models)

Weight Distribution (Stage V Engine Model)

Weight Distribution (Other Engine Models)

Body Hoist (Stage V Engine Model)

Body Hoist (Other Engine Models)

Earthmoving

Parts & Service

Power Systems

Technology

Contact Us