CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    AD63 Underground Articulated Truck
    View Product
    AD45 Underground Articulated Truck
    View Product Remove

    Engine
    Engine Model Cat® C27 Cat® C18 -
    Engine Power - EU Stage V Engine - ISO 14396:2002 795 HP 598 HP -
    Bore 5.4 in 5.7 in -
    Stroke 6 in 7.2 in -
    Displacement 1650 in² 1104.53 in³ -
    Note (1) Meets EU Stage V emission standards and U.S. EPA Tier 4 Final. Power ratings apply at a rated speed of 2,000 rpm when tested under the reference conditions for the specified standard. -
    Note (2) Power ratings apply at a rated speed of 1,800 rpm when tested under the reference conditions for the specified standard. All rating conditions are based on ISO/TR14396:2002, inlet air standard conditions with a total barometric pressure of 100 kPa (29.5 in Hg), with a vapor pressure of 1 kPa (0.295 in Hg), and 25° C (77° F). Performance measured using fuel to EPA specificat -
    Note (3) All rating conditions are based on ISO/TR14396, inlet air standard conditions with a total barometric pressure of 100 kPa (29.5 in Hg), with a vapor pressure of 1 kPa (0.295 in Hg), and 25° C (77° F). Performance measured using fuel to EPA specifications Minimal engine derating* required up to 3048 m (10,000 ft) @ rated speed for Stage V engines, 2700 m (8,858 ft) for Tier 3/Stage IIIA equivalent engines and 3505 m (11,500 ft) for Tier 2/Stage II equivalent VR engines. -
    Engine Power - Tier 3 Engine - ISO 14396:2002 - 581 HP -
    Engine Power - VR Engine - ISO 14396:2002 - 581 HP -
    Note (4) - Optional Ventilation Reduction Package available. -
    Note (5) - Optional engine with emissions equivalent to Tier 3 and Stage IIIA is also available. -
    Note (6) - Optional engine available that meets U.S. EPA Tier 4 Final and EU Stage V emission standards. -
    Note (7) - *<5 % -

    Operating Specifications
    Nominal Payload Capacity 138891 lb 99208 lb -
    Gross Machine Operating Mass 262218 lb - -
    Body Capacities 26.9-38.3 m³ (35.2-50.1 yd³) 18.0-25.1 m³ (23.5-32.8 yd³) -
    Gross Machine Mass - 196765 lb -
    Shipping Mass (Stage V Engine Model) - 96225 lb -
    Shipping Mass (Other Engine Models) - 94415 lb -

    Weights
    Empty 115577 lb - -
    Empty - Front Axle 81716 lb - -
    Empty - Rear Axle 33861 lb - -
    Loaded 254468 lb - -
    Loaded - Front Axle 126669 lb - -
    Loaded - Rear Axle 127800 lb - -

    Weight Distribution
    Empty - Front Axle 70.7% - -
    Empty - Rear Axle 29.3% - -
    Loaded - Front Axle 49.8% - -
    Loaded - Rear Axle 50.2% - -

    Transmission
    Forward - 1 4.1 mile/h 4.4 mile/h -
    Forward - 2 5.7 mile/h 5.9 mile/h -
    Forward - 3 7.7 mile/h 8 mile/h -
    Forward - 4 10.3 mile/h 10.8 mile/h -
    Forward - 5 14 mile/h 14.6 mile/h -
    Forward - 6 18.9 mile/h 19.7 mile/h -
    Forward - 7 25.5 mile/h 26.4 mile/h -
    Reverse - 1 5.3 mile/h 4.2 mile/h -
    Note Maximum travel speeds with standard 35 × 65 R33 tires. Maximum travel speeds with standard 29.5 × R29 tires. -
    Reverse - 2 - 5.6 mile/h -

    Final Drives
    Differential Ratio 3.46:1 3.46:1 -
    Final Drive Ratio 5.5:1 5.65:1 -
    Total Reduction Ratio 19.04:1 19.55:1 -

    Body Hoist
    Raise 13 s - -
    Lower 24 s - -
    Total Cycle Time 37 s - -

    Body Capacities
    Dump Body - 1 - Standard 35.2 yd³ - -
    Dump Body - 2 42.6 yd³ - -
    Dump Body - 3 44.2 yd³ 32.8 yd³ -
    Dump Body - 4 47.9 yd³ - -
    Dump Body - 5 (Light Material) 50.1 yd³ - -
    Note Heaped SAE 2:1. Heaped SAE 2:1. -
    Dump Body - 1 - 23.6 yd³ -
    Dump Body - 2 - Standard - 27.9 yd³ -
    Ejector Body - 29.9 yd³ -

    Turning Dimensions
    Outside Clearance Radius 393.9 in - -
    Inside Turn Radius 218.1 in - -
    Frame Oscillation 10° 10° -
    Articulation Angle 42.5 ° 42.5° -
    Outside Clearance Radius* - 371 in -
    Inside Clearance Radius* - 209 in -
    Note - *Clearance dimensions are for reference only. -

    Service Refill Capacities
    Engine Crankcase - With Filter 25 gal (US) 16.9 gal (US) -
    Transmission 14 gal (US) 15.9 gal (US) -
    Hydraulic Tank 100.6 gal (US) 70.3 gal (US) -
    Cooling System 39.6 gal (US) 22.5 gal (US) -
    Front Differential and Final Drives 36.5 gal (US) 20.3 gal (US) -
    Rear Differential and Final Drives 36.5 gal (US) 21.9 gal (US) -
    Fuel Tank 237.7 gal (US) 201.8 gal (US) -

    Tires
    Tire Size 35 × 65 R33 29.5 × R29 -

    Standards
    Standards ROPS/FOPS Certified Cab ROPS/FOPS Certified Cab -

    Weights (Stage V Engine Model)
    Operating Mass - 91285 lb -
    Operating Mass - Front Axle - 64565 lb -
    Operating Mass - Rear Axle - 26720 lb -
    Operating Mass + Rated Payload - 190495 lb -
    Operating Mass + Rated Payload - Front Axle - 89235 lb -
    Operating Mass + Rated Payload - Rear Axle - 101260 lb -

    Weights (Other Engine Models)
    Operating Mass - 88320 lb -
    Operating Mass - Front Axle - 61225 lb -
    Operating Mass - Rear Axle - 27095 lb -
    Operating Mass + Rated Payload - 187530 lb -
    Operating Mass + Rated Payload - Front Axle - 85355 lb -
    Operating Mass + Rated Payload - Rear Axle - 102175 lb -

    Weight Distribution (Stage V Engine Model)
    Empty - Front Axle - 70.7% -
    Empty - Rear Axle - 29.3% -
    Loaded - Front Axle - 46.8% -
    Loaded - Rear Axle - 53.2% -

    Weight Distribution (Other Engine Models)
    Empty - Front Axle - 69.3% -
    Empty - Rear Axle - 30.7% -
    Loaded - Front Axle - 45.5% -
    Loaded - Rear Axle - 54.5% -

    Body Hoist (Stage V Engine Model)
    Raise - 15 Seconds -
    Lower - 21 Seconds -
    Total Cycle Time - 36 Seconds -

    Body Hoist (Other Engine Models)
    Raise - 14 Seconds -
    Lower - 21 Seconds -
    Total Cycle Time - 35 Seconds -
    Add a Similar Product:
    • R3000H Underground Mining Loader Add
    • AD30 Underground Mining Truck Add
    • R2900G Underground Mining Loader Add
    • R1700 Underground Mining Loader Add
    • R1300G Underground Mining Loader Add
    • R1600H Underground Mining Loader Add