|
AD63 Underground Articulated Truck
|
R1700 Underground Mining Loader
|
R1600H Underground Mining Loader
|
Engine |
| Engine Model |
Cat® C27 |
Cat® C13 |
Cat® C11 |
| Engine Power - EU Stage V Engine - ISO 14396:2002 |
795 HP |
- |
- |
| Bore |
5.4 in |
- |
5.1 in |
| Stroke |
6 in |
- |
5.5 in |
| Displacement |
1650 in² |
- |
680.4 in³ |
| Note (1) |
Meets EU Stage V emission standards and U.S. EPA Tier 4 Final. |
Power ratings apply at a rated speed of 1,800 rpm for LRCs (VR and Tier 3/Stage IIIA) engines when tested under the reference conditions for the specified standard. |
Power ratings apply at a rated speed of 1,800 rpm when tested under the reference conditions for the specified standard. |
| Note (2) |
Power ratings apply at a rated speed of 1,800 rpm when tested under the reference conditions for the specified standard. |
Power ratings apply at a rated speed of 2,050 rpm for HRC (Stage V) engine when tested under the reference conditions for the specified standard. |
All rating conditions are based on ISO/TR14396:2002, inlet air standard conditions with a total barometric pressure of 100 kPa (29.5 in Hg), with a vapor pressure of 1 kPa (0.295 in Hg), and 25° C (77° F). Performance measured using fuel to EPA specificat |
| Note (3) |
All rating conditions are based on ISO/TR14396, inlet air standard conditions with a total barometric pressure of 100 kPa (29.5 in Hg), with a vapor pressure of 1 kPa (0.295 in Hg), and 25° C (77° F). Performance measured using fuel to EPA specifications |
All rating conditions are based on ISO/TR14396, inlet air standard conditions with a total barometric pressure of 100 kPa (29.5 in Hg), with a vapor pressure of 1 kPa (0.295 in Hg), and 25° C (77° F). Performance measured using fuel to EPA specifications |
No engine derating required up to 3048 m (10,000 ft) for Tier 3 Engine and 1828 m (6,000 ft) for VR Engine. |
| Engine Power - Stage V Engine - ISO 14396:2002 |
- |
345 HP |
- |
| Engine Power - Tier 3 Engine - ISO 14396:2002 |
- |
361 HP |
271 HP |
| Engine Power - VR Engine - ISO 14396:2002 |
- |
361 HP |
271 HP |
| Note (4) |
- |
No engine derating required up to 2895 m (9,500 ft) altitude for Stage V engines, 3505 m (11,500 ft) altitude for Tier 3/Stage IIIA engines, and 3200 m (10,500 ft) for Tier 2/Stage II VR engines. |
Optional Ventilation Reduction package available. |
| Note (5) |
- |
Optional Ventilation Reduction package available. |
Optional engine with emissions equivalent to U.S. EPA Tier 3 and EU Stage IIIA is also available. |
| Note (6) |
- |
Optional engine with emissions equivalent to Tier 3 and Stage IIIA is also available. |
- |
| Note (7) |
- |
Optional engine meeting the U.S. EPA Tier 4 Final and EU Stage V emission standards is also available. |
- |
Operating Specifications |
| Nominal Payload Capacity |
138891 lb |
33069 lb |
22487 lb |
| Gross Machine Operating Mass |
262218 lb |
- |
- |
| Body Capacities |
26.9-38.3 m³ (35.2-50.1 yd³) |
- |
- |
| Gross Machine Mass - Loaded |
- |
138316 lb |
- |
| Static Tipping Load - Straight Ahead - Lift Arms Horizontal |
- |
83218 lb |
57110 lb |
| Static Tipping Load - Full Turn - Lift Arms Horizontal |
- |
69635 lb |
46067 lb |
| Breakout Force - Lift and Tilt |
- |
53330 lb |
- |
| Gross Machine Mass |
- |
- |
97453 lb |
| Breakout Force - Tilt (ISO) |
- |
- |
39524 lb |
| Breakout Force - Lift (ISO) |
- |
- |
42333 lb |
Weights |
| Empty |
115577 lb |
- |
- |
| Empty - Front Axle |
81716 lb |
- |
- |
| Empty - Rear Axle |
33861 lb |
- |
- |
| Loaded |
254468 lb |
- |
- |
| Loaded - Front Axle |
126669 lb |
- |
- |
| Loaded - Rear Axle |
127800 lb |
- |
- |
| Operating Mass* |
- |
95189 lb |
66469 lb |
| Operating Mass* - Front Axle |
- |
38358 lb |
28404 lb |
| Operating Mass* - Rear Axle |
- |
56831 lb |
38065 lb |
| Operating Mass + Rated Payload* |
- |
128258 lb |
88956 lb |
| Operating Mass + Rated Payload* - Front Axle |
- |
91412 lb |
62011 lb |
| Operating Mass + Rated Payload* - Rear Axle |
- |
36846 lb |
26944 lb |
| Note |
- |
*Calculated weights. |
*Calculated weights. |
Weight Distribution |
| Empty - Front Axle |
70.7% |
- |
- |
| Empty - Rear Axle |
29.3% |
- |
- |
| Loaded - Front Axle |
49.8% |
- |
- |
| Loaded - Rear Axle |
50.2% |
- |
- |
Transmission |
| Forward - 1 |
4.1 mile/h |
3 mile/h |
2.8 mile/h |
| Forward - 2 |
5.7 mile/h |
5.7 mile/h |
5.6 mile/h |
| Forward - 3 |
7.7 mile/h |
10.2 mile/h |
10.4 mile/h |
| Forward - 4 |
10.3 mile/h |
17.9 mile/h |
17.1 mile/h |
| Forward - 5 |
14 mile/h |
- |
- |
| Forward - 6 |
18.9 mile/h |
- |
- |
| Forward - 7 |
25.5 mile/h |
- |
- |
| Reverse - 1 |
5.3 mile/h |
3.7 mile/h |
3.1 mile/h |
| Note |
Maximum travel speeds with standard 35 × 65 R33 tires. |
- |
- |
| Reverse - 2 |
- |
6.5 mile/h |
6.8 mile/h |
| Reverse - 3 |
- |
11.6 mile/h |
11.8 mile/h |
| Reverse - 4 |
- |
20.2 mile/h |
18.2 mile/h |
Final Drives |
| Differential Ratio |
3.46:1 |
- |
- |
| Final Drive Ratio |
5.5:1 |
- |
- |
| Total Reduction Ratio |
19.04:1 |
- |
- |
Body Hoist |
| Raise |
13 s |
- |
- |
| Lower |
24 s |
- |
- |
| Total Cycle Time |
37 s |
- |
- |
Body Capacities |
| Dump Body - 1 - Standard |
35.2 yd³ |
- |
- |
| Dump Body - 2 |
42.6 yd³ |
- |
- |
| Dump Body - 3 |
44.2 yd³ |
- |
- |
| Dump Body - 4 |
47.9 yd³ |
- |
- |
| Dump Body - 5 (Light Material) |
50.1 yd³ |
- |
- |
| Note |
Heaped SAE 2:1. |
- |
- |
Turning Dimensions |
| Outside Clearance Radius |
393.9 in |
272 in |
- |
| Inside Turn Radius |
218.1 in |
- |
- |
| Frame Oscillation |
10° |
- |
- |
| Articulation Angle |
42.5 ° |
44° |
42.5° |
| Inner Clearance Radius |
- |
123.5 in |
- |
| Axle Oscillation |
- |
8° |
10° |
| Outside Clearance Radius* |
- |
- |
261.3 in |
| Inner Clearance Radius* |
- |
- |
129.6 in |
| Note |
- |
- |
*Clearance dimensions are for reference only. |
Service Refill Capacities |
| Engine Crankcase - With Filter |
25 gal (US) |
- |
8.98 gal (US) |
| Transmission |
14 gal (US) |
- |
12.4 gal (US) |
| Hydraulic Tank |
100.6 gal (US) |
35.7 gal (US) |
33 gal (US) |
| Cooling System |
39.6 gal (US) |
19.8 gal (US) |
16.1 gal (US) |
| Front Differential and Final Drives |
36.5 gal (US) |
- |
21.1 gal (US) |
| Rear Differential and Final Drives |
36.5 gal (US) |
- |
21.1 gal (US) |
| Fuel Tank |
237.7 gal (US) |
- |
105.7 gal (US) |
| Engine Crankcase |
- |
9.8 gal (US) |
- |
| Secondary Fuel Tank - If Equipped |
- |
- |
87.2 gal (US) |
Tires |
| Tire Size |
35 × 65 R33 |
26.5R25 |
18 × R25 |
Standards |
| Standards |
ROPS/FOPS Certified Cab |
- |
ROPS/FOPS Certified Cab |
Hydraulic Cycle Times |
| Raise |
- |
6.8 s |
7.6 s |
| Dump |
- |
3.3 s |
1.6 s |
| Lower, Empty, Float Down |
- |
2.9 s |
2 s |
| Total Cycle Time |
- |
13.2 s |
11.2 s |
Bucket Capacities |
| Bucket Capacities |
- |
5.7-8.6 m³ (7.5-11.2 yd³) |
4.2-5.9 m³ (5.5-7.7 yd³) |
| Dump Bucket - 1 - Standard Bucket |
- |
7.5 yd³ |
- |
| Dump Bucket - 2 |
- |
8 yd³ |
- |
| Dump Bucket - 3 |
- |
8.6 yd³ |
7.3 yd³ |
| Dump Bucket - 4 |
- |
9.4 yd³ |
7.7 yd³ |
| Dump Bucket - 5 |
- |
9.8 yd³ |
- |
| Dump Bucket - 6 |
- |
10.5 yd³ |
- |
| Light Material Bucket |
- |
11.2 yd³ |
- |
| Ejector Bucket |
- |
7.6 yd³ |
6.3 yd³ |
| Bolt Together Bucket (1) |
- |
8.9 yd³ |
- |
| Bolt Together Bucket (2) |
- |
9.8 yd³ |
- |
| Dump Bucket - 1 |
- |
- |
5.5 yd³ |
| Dump Bucket - 2 - Standard Bucket |
- |
- |
6.3 yd³ |
| Bolt Together Bucket |
- |
- |
6.9 yd³ |
Service Capacities - Not Refill |
| Fuel System |
- |
128.4 gal (US) |
- |
| DEF Tank |
- |
7.1 gal (US) |
- |
| Front Differential and Final Drive |
- |
39 gal (US) |
- |
| Rear Differential and Final Drive |
- |
37.2 gal (US) |
- |
| Transmission |
- |
14.2 gal (US) |
- |
