Compare Equipment Go Back

AD63 Underground Articulated Truck
R1600H Underground Mining Loader

Engine

Engine Model Cat® C27 Cat® C11 -
Engine Power - EU Stage V Engine - ISO 14396:2002 795 HP - -
Bore 5.4 in 5.1 in -
Stroke 6 in 5.5 in -
Displacement 1650 in² 680.4 in³ -
Note (1) Meets EU Stage V emission standards and U.S. EPA Tier 4 Final. Power ratings apply at a rated speed of 1,800 rpm when tested under the reference conditions for the specified standard. -
Note (2) Power ratings apply at a rated speed of 1,800 rpm when tested under the reference conditions for the specified standard. All rating conditions are based on ISO/TR14396:2002, inlet air standard conditions with a total barometric pressure of 100 kPa (29.5 in Hg), with a vapor pressure of 1 kPa (0.295 in Hg), and 25° C (77° F). Performance measured using fuel to EPA specificat -
Note (3) All rating conditions are based on ISO/TR14396, inlet air standard conditions with a total barometric pressure of 100 kPa (29.5 in Hg), with a vapor pressure of 1 kPa (0.295 in Hg), and 25° C (77° F). Performance measured using fuel to EPA specifications No engine derating required up to 3048 m (10,000 ft) for Tier 3 Engine and 1828 m (6,000 ft) for VR Engine. -
Engine Power - Tier 3 Engine - ISO 14396:2002 - 271 HP -
Engine Power - VR Engine - ISO 14396:2002 - 271 HP -
Note (4) - Optional Ventilation Reduction package available. -
Note (5) - Optional engine with emissions equivalent to U.S. EPA Tier 3 and EU Stage IIIA is also available. -

Operating Specifications

Nominal Payload Capacity 138891 lb 22487 lb -
Gross Machine Operating Mass 262218 lb - -
Body Capacities 26.9-38.3 m³ (35.2-50.1 yd³) - -
Gross Machine Mass - 97453 lb -
Static Tipping Load - Straight Ahead - Lift Arms Horizontal - 57110 lb -
Static Tipping Load - Full Turn - Lift Arms Horizontal - 46067 lb -
Breakout Force - Tilt (ISO) - 39524 lb -
Breakout Force - Lift (ISO) - 42333 lb -

Weights

Empty 115577 lb - -
Empty - Front Axle 81716 lb - -
Empty - Rear Axle 33861 lb - -
Loaded 254468 lb - -
Loaded - Front Axle 126669 lb - -
Loaded - Rear Axle 127800 lb - -
Operating Mass* - 66469 lb -
Operating Mass* - Front Axle - 28404 lb -
Operating Mass* - Rear Axle - 38065 lb -
Operating Mass + Rated Payload* - 88956 lb -
Operating Mass + Rated Payload* - Front Axle - 62011 lb -
Operating Mass + Rated Payload* - Rear Axle - 26944 lb -
Note - *Calculated weights. -

Weight Distribution

Empty - Front Axle 70.7% - -
Empty - Rear Axle 29.3% - -
Loaded - Front Axle 49.8% - -
Loaded - Rear Axle 50.2% - -

Transmission

Forward - 1 4.1 mile/h 2.8 mile/h -
Forward - 2 5.7 mile/h 5.6 mile/h -
Forward - 3 7.7 mile/h 10.4 mile/h -
Forward - 4 10.3 mile/h 17.1 mile/h -
Forward - 5 14 mile/h - -
Forward - 6 18.9 mile/h - -
Forward - 7 25.5 mile/h - -
Reverse - 1 5.3 mile/h 3.1 mile/h -
Note Maximum travel speeds with standard 35 × 65 R33 tires. - -
Reverse - 2 - 6.8 mile/h -
Reverse - 3 - 11.8 mile/h -
Reverse - 4 - 18.2 mile/h -

Final Drives

Differential Ratio 3.46:1 - -
Final Drive Ratio 5.5:1 - -
Total Reduction Ratio 19.04:1 - -

Body Hoist

Raise 13 s - -
Lower 24 s - -
Total Cycle Time 37 s - -

Body Capacities

Dump Body - 1 - Standard 35.2 yd³ - -
Dump Body - 2 42.6 yd³ - -
Dump Body - 3 44.2 yd³ - -
Dump Body - 4 47.9 yd³ - -
Dump Body - 5 (Light Material) 50.1 yd³ - -
Note Heaped SAE 2:1. - -

Turning Dimensions

Outside Clearance Radius 393.9 in - -
Inside Turn Radius 218.1 in - -
Frame Oscillation 10° - -
Articulation Angle 42.5 ° 42.5° -
Outside Clearance Radius* - 261.3 in -
Inner Clearance Radius* - 129.6 in -
Axle Oscillation - 10° -
Note - *Clearance dimensions are for reference only. -

Service Refill Capacities

Engine Crankcase - With Filter 25 gal (US) 8.98 gal (US) -
Transmission 14 gal (US) 12.4 gal (US) -
Hydraulic Tank 100.6 gal (US) 33 gal (US) -
Cooling System 39.6 gal (US) 16.1 gal (US) -
Front Differential and Final Drives 36.5 gal (US) 21.1 gal (US) -
Rear Differential and Final Drives 36.5 gal (US) 21.1 gal (US) -
Fuel Tank 237.7 gal (US) 105.7 gal (US) -
Secondary Fuel Tank - If Equipped - 87.2 gal (US) -

Tires

Tire Size 35 × 65 R33 18 × R25 -

Standards

Standards ROPS/FOPS Certified Cab ROPS/FOPS Certified Cab -

Hydraulic Cycle Times

Raise - 7.6 s -
Dump - 1.6 s -
Lower, Empty, Float Down - 2 s -
Total Cycle Time - 11.2 s -

Bucket Capacities

Bucket Capacities - 4.2-5.9 m³ (5.5-7.7 yd³) -
Dump Bucket - 1 - 5.5 yd³ -
Dump Bucket - 2 - Standard Bucket - 6.3 yd³ -
Dump Bucket - 3 - 7.3 yd³ -
Dump Bucket - 4 - 7.7 yd³ -
Ejector Bucket - 6.3 yd³ -
Bolt Together Bucket - 6.9 yd³ -
Add a Similar Product:
  • AD45 Underground Articulated Truck Add
  • R3000H Underground Mining Loader Add
  • AD30 Underground Mining Truck Add
  • R2900G Underground Mining Loader Add
  • R1700 Underground Mining Loader Add
  • R1300G Underground Mining Loader Add