CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    AD63 Underground Articulated Truck
    View Product
    R1700 Underground Mining Loader
    View Product Remove
    AD45 Underground Articulated Truck
    View Product Remove
    R1600H Underground Mining Loader
    View Product Remove

    Engine
    Engine Model Cat® C27 Cat® C13 Cat® C18 Cat® C11
    Engine Power - EU Stage V Engine - ISO 14396:2002 795 HP - 598 HP -
    Bore 5.4 in - 5.7 in 5.1 in
    Stroke 6 in - 7.2 in 5.5 in
    Displacement 1650 in² - 1104.53 in³ 680.4 in³
    Note (1) Meets EU Stage V emission standards and U.S. EPA Tier 4 Final. Power ratings apply at a rated speed of 1,800 rpm for LRCs (VR and Tier 3/Stage IIIA) engines when tested under the reference conditions for the specified standard. Power ratings apply at a rated speed of 2,000 rpm when tested under the reference conditions for the specified standard. Power ratings apply at a rated speed of 1,800 rpm when tested under the reference conditions for the specified standard.
    Note (2) Power ratings apply at a rated speed of 1,800 rpm when tested under the reference conditions for the specified standard. Power ratings apply at a rated speed of 2,050 rpm for HRC (Stage V) engine when tested under the reference conditions for the specified standard. All rating conditions are based on ISO/TR14396:2002, inlet air standard conditions with a total barometric pressure of 100 kPa (29.5 in Hg), with a vapor pressure of 1 kPa (0.295 in Hg), and 25° C (77° F). Performance measured using fuel to EPA specificat All rating conditions are based on ISO/TR14396:2002, inlet air standard conditions with a total barometric pressure of 100 kPa (29.5 in Hg), with a vapor pressure of 1 kPa (0.295 in Hg), and 25° C (77° F). Performance measured using fuel to EPA specificat
    Note (3) All rating conditions are based on ISO/TR14396, inlet air standard conditions with a total barometric pressure of 100 kPa (29.5 in Hg), with a vapor pressure of 1 kPa (0.295 in Hg), and 25° C (77° F). Performance measured using fuel to EPA specifications All rating conditions are based on ISO/TR14396, inlet air standard conditions with a total barometric pressure of 100 kPa (29.5 in Hg), with a vapor pressure of 1 kPa (0.295 in Hg), and 25° C (77° F). Performance measured using fuel to EPA specifications Minimal engine derating* required up to 3048 m (10,000 ft) @ rated speed for Stage V engines, 2700 m (8,858 ft) for Tier 3/Stage IIIA equivalent engines and 3505 m (11,500 ft) for Tier 2/Stage II equivalent VR engines. No engine derating required up to 3048 m (10,000 ft) for Tier 3 Engine and 1828 m (6,000 ft) for VR Engine.
    Engine Power - Stage V Engine - ISO 14396:2002 - 345 HP - -
    Engine Power - Tier 3 Engine - ISO 14396:2002 - 361 HP 581 HP 271 HP
    Engine Power - VR Engine - ISO 14396:2002 - 361 HP 581 HP 271 HP
    Note (4) - No engine derating required up to 2895 m (9,500 ft) altitude for Stage V engines, 3505 m (11,500 ft) altitude for Tier 3/Stage IIIA engines, and 3200 m (10,500 ft) for Tier 2/Stage II VR engines. Optional Ventilation Reduction Package available. Optional Ventilation Reduction package available.
    Note (5) - Optional Ventilation Reduction package available. Optional engine with emissions equivalent to Tier 3 and Stage IIIA is also available. Optional engine with emissions equivalent to U.S. EPA Tier 3 and EU Stage IIIA is also available.
    Note (6) - Optional engine with emissions equivalent to Tier 3 and Stage IIIA is also available. Optional engine available that meets U.S. EPA Tier 4 Final and EU Stage V emission standards. -
    Note (7) - Optional engine meeting the U.S. EPA Tier 4 Final and EU Stage V emission standards is also available. *<5 % -

    Operating Specifications
    Nominal Payload Capacity 138891 lb 33069 lb 99208 lb 22487 lb
    Gross Machine Operating Mass 262218 lb - - -
    Body Capacities 26.9-38.3 m³ (35.2-50.1 yd³) - 18.0-25.1 m³ (23.5-32.8 yd³) -
    Gross Machine Mass - Loaded - 138316 lb - -
    Static Tipping Load - Straight Ahead - Lift Arms Horizontal - 83218 lb - 57110 lb
    Static Tipping Load - Full Turn - Lift Arms Horizontal - 69635 lb - 46067 lb
    Breakout Force - Lift and Tilt - 53330 lb - -
    Gross Machine Mass - - 196765 lb 97453 lb
    Shipping Mass (Stage V Engine Model) - - 96225 lb -
    Shipping Mass (Other Engine Models) - - 94415 lb -
    Breakout Force - Tilt (ISO) - - - 39524 lb
    Breakout Force - Lift (ISO) - - - 42333 lb

    Weights
    Empty 115577 lb - - -
    Empty - Front Axle 81716 lb - - -
    Empty - Rear Axle 33861 lb - - -
    Loaded 254468 lb - - -
    Loaded - Front Axle 126669 lb - - -
    Loaded - Rear Axle 127800 lb - - -
    Operating Mass* - 95189 lb - 66469 lb
    Operating Mass* - Front Axle - 38358 lb - 28404 lb
    Operating Mass* - Rear Axle - 56831 lb - 38065 lb
    Operating Mass + Rated Payload* - 128258 lb - 88956 lb
    Operating Mass + Rated Payload* - Front Axle - 91412 lb - 62011 lb
    Operating Mass + Rated Payload* - Rear Axle - 36846 lb - 26944 lb
    Note - *Calculated weights. - *Calculated weights.

    Weight Distribution
    Empty - Front Axle 70.7% - - -
    Empty - Rear Axle 29.3% - - -
    Loaded - Front Axle 49.8% - - -
    Loaded - Rear Axle 50.2% - - -

    Transmission
    Forward - 1 4.1 mile/h 3 mile/h 4.4 mile/h 2.8 mile/h
    Forward - 2 5.7 mile/h 5.7 mile/h 5.9 mile/h 5.6 mile/h
    Forward - 3 7.7 mile/h 10.2 mile/h 8 mile/h 10.4 mile/h
    Forward - 4 10.3 mile/h 17.9 mile/h 10.8 mile/h 17.1 mile/h
    Forward - 5 14 mile/h - 14.6 mile/h -
    Forward - 6 18.9 mile/h - 19.7 mile/h -
    Forward - 7 25.5 mile/h - 26.4 mile/h -
    Reverse - 1 5.3 mile/h 3.7 mile/h 4.2 mile/h 3.1 mile/h
    Note Maximum travel speeds with standard 35 × 65 R33 tires. - Maximum travel speeds with standard 29.5 × R29 tires. -
    Reverse - 2 - 6.5 mile/h 5.6 mile/h 6.8 mile/h
    Reverse - 3 - 11.6 mile/h - 11.8 mile/h
    Reverse - 4 - 20.2 mile/h - 18.2 mile/h

    Final Drives
    Differential Ratio 3.46:1 - 3.46:1 -
    Final Drive Ratio 5.5:1 - 5.65:1 -
    Total Reduction Ratio 19.04:1 - 19.55:1 -

    Body Hoist
    Raise 13 s - - -
    Lower 24 s - - -
    Total Cycle Time 37 s - - -

    Body Capacities
    Dump Body - 1 - Standard 35.2 yd³ - - -
    Dump Body - 2 42.6 yd³ - - -
    Dump Body - 3 44.2 yd³ - 32.8 yd³ -
    Dump Body - 4 47.9 yd³ - - -
    Dump Body - 5 (Light Material) 50.1 yd³ - - -
    Note Heaped SAE 2:1. - Heaped SAE 2:1. -
    Dump Body - 1 - - 23.6 yd³ -
    Dump Body - 2 - Standard - - 27.9 yd³ -
    Ejector Body - - 29.9 yd³ -

    Turning Dimensions
    Outside Clearance Radius 393.9 in 272 in - -
    Inside Turn Radius 218.1 in - - -
    Frame Oscillation 10° - 10° -
    Articulation Angle 42.5 ° 44° 42.5° 42.5°
    Inner Clearance Radius - 123.5 in - -
    Axle Oscillation - 8° - 10°
    Outside Clearance Radius* - - 371 in 261.3 in
    Inside Clearance Radius* - - 209 in -
    Note - - *Clearance dimensions are for reference only. *Clearance dimensions are for reference only.
    Inner Clearance Radius* - - - 129.6 in

    Service Refill Capacities
    Engine Crankcase - With Filter 25 gal (US) - 16.9 gal (US) 8.98 gal (US)
    Transmission 14 gal (US) - 15.9 gal (US) 12.4 gal (US)
    Hydraulic Tank 100.6 gal (US) 35.7 gal (US) 70.3 gal (US) 33 gal (US)
    Cooling System 39.6 gal (US) 19.8 gal (US) 22.5 gal (US) 16.1 gal (US)
    Front Differential and Final Drives 36.5 gal (US) - 20.3 gal (US) 21.1 gal (US)
    Rear Differential and Final Drives 36.5 gal (US) - 21.9 gal (US) 21.1 gal (US)
    Fuel Tank 237.7 gal (US) - 201.8 gal (US) 105.7 gal (US)
    Engine Crankcase - 9.8 gal (US) - -
    Secondary Fuel Tank - If Equipped - - - 87.2 gal (US)

    Tires
    Tire Size 35 × 65 R33 26.5R25 29.5 × R29 18 × R25

    Standards
    Standards ROPS/FOPS Certified Cab - ROPS/FOPS Certified Cab ROPS/FOPS Certified Cab

    Hydraulic Cycle Times
    Raise - 6.8 s - 7.6 s
    Dump - 3.3 s - 1.6 s
    Lower, Empty, Float Down - 2.9 s - 2 s
    Total Cycle Time - 13.2 s - 11.2 s

    Bucket Capacities
    Bucket Capacities - 5.7-8.6 m³ (7.5-11.2 yd³) - 4.2-5.9 m³ (5.5-7.7 yd³)
    Dump Bucket - 1 - Standard Bucket - 7.5 yd³ - -
    Dump Bucket - 2 - 8 yd³ - -
    Dump Bucket - 3 - 8.6 yd³ - 7.3 yd³
    Dump Bucket - 4 - 9.4 yd³ - 7.7 yd³
    Dump Bucket - 5 - 9.8 yd³ - -
    Dump Bucket - 6 - 10.5 yd³ - -
    Light Material Bucket - 11.2 yd³ - -
    Ejector Bucket - 7.6 yd³ - 6.3 yd³
    Bolt Together Bucket (1) - 8.9 yd³ - -
    Bolt Together Bucket (2) - 9.8 yd³ - -
    Dump Bucket - 1 - - - 5.5 yd³
    Dump Bucket - 2 - Standard Bucket - - - 6.3 yd³
    Bolt Together Bucket - - - 6.9 yd³

    Service Capacities - Not Refill
    Fuel System - 128.4 gal (US) - -
    DEF Tank - 7.1 gal (US) - -
    Front Differential and Final Drive - 39 gal (US) - -
    Rear Differential and Final Drive - 37.2 gal (US) - -
    Transmission - 14.2 gal (US) - -

    Weights (Stage V Engine Model)
    Operating Mass - - 91285 lb -
    Operating Mass - Front Axle - - 64565 lb -
    Operating Mass - Rear Axle - - 26720 lb -
    Operating Mass + Rated Payload - - 190495 lb -
    Operating Mass + Rated Payload - Front Axle - - 89235 lb -
    Operating Mass + Rated Payload - Rear Axle - - 101260 lb -

    Weights (Other Engine Models)
    Operating Mass - - 88320 lb -
    Operating Mass - Front Axle - - 61225 lb -
    Operating Mass - Rear Axle - - 27095 lb -
    Operating Mass + Rated Payload - - 187530 lb -
    Operating Mass + Rated Payload - Front Axle - - 85355 lb -
    Operating Mass + Rated Payload - Rear Axle - - 102175 lb -

    Weight Distribution (Stage V Engine Model)
    Empty - Front Axle - - 70.7% -
    Empty - Rear Axle - - 29.3% -
    Loaded - Front Axle - - 46.8% -
    Loaded - Rear Axle - - 53.2% -

    Weight Distribution (Other Engine Models)
    Empty - Front Axle - - 69.3% -
    Empty - Rear Axle - - 30.7% -
    Loaded - Front Axle - - 45.5% -
    Loaded - Rear Axle - - 54.5% -

    Body Hoist (Stage V Engine Model)
    Raise - - 15 Seconds -
    Lower - - 21 Seconds -
    Total Cycle Time - - 36 Seconds -

    Body Hoist (Other Engine Models)
    Raise - - 14 Seconds -
    Lower - - 21 Seconds -
    Total Cycle Time - - 35 Seconds -
    Add a Similar Product:
    • R2900G Underground Mining Loader Add
    • R3000H Underground Mining Loader Add
    • AD30 Underground Mining Truck Add
    • R1300G Underground Mining Loader Add