|
R1600H Underground Mining Loader
|
R2900G Underground Mining Loader
|
R3000H Underground Mining Loader
|
Engine |
| Engine Model |
Cat® C11 |
Cat® C15 |
Cat® C15 |
| Engine Power - Tier 3 Engine - ISO 14396:2002 |
271 HP |
401 HP |
401 HP |
| Engine Power - VR Engine - ISO 14396:2002 |
271 HP |
401 HP |
401 HP |
| Bore |
5.1 in |
5.4 in |
5.4 in |
| Stroke |
5.5 in |
6.8 in |
6.8 in |
| Displacement |
680.4 in³ |
927.9 in³ |
927.6 in³ |
| Note (1) |
Power ratings apply at a rated speed of 1,800 rpm when tested under the reference conditions for the specified standard. |
Power ratings apply at a rated speed of 1,800 rpm when tested under the reference conditions for the specified standard. |
Power ratings apply at a rated speed of 1,800 rpm when tested under the reference conditions for the specified standard. |
| Note (2) |
All rating conditions are based on ISO/TR14396:2002, inlet air standard conditions with a total barometric pressure of 100 kPa (29.5 in Hg), with a vapor pressure of 1 kPa (0.295 in Hg), and 25° C (77° F). Performance measured using fuel to EPA specificat |
All rating conditions are based on ISO/TR14396:2002, inlet air standard conditions with a total barometric pressure of 100 kPa (29.5 in Hg), with a vapor pressure of 1 kPa (0.295 in Hg), and 25° C (77° F). Performance measured using fuel to EPA specificat |
All rating conditions are based on ISO/TR 14396:2002, inlet air standard conditions with a total barometric pressure of 100 kPa (29.5 in Hg), with a vapor pressure of 1 kPa (0.295 in Hg), and 25° C (77° F). Performance measured using fuel to EPA specifica |
| Note (3) |
No engine derating required up to 3048 m (10,000 ft) for Tier 3 Engine and 1828 m (6,000 ft) for VR Engine. |
No engine derating required up to 591 m (1,938 ft) altitude. |
No engine derating required up to 3050 m (10,006 ft) altitude for equivalent Tier 3 engines, and 3506 m (11,502 ft) for VR engines. |
| Note (4) |
Optional Ventilation Reduction package available. |
Optional Ventilation Reduction Package available. |
Optional Ventilation Reduction package available. |
| Note (5) |
Optional engine with emissions equivalent to U.S. EPA Tier 3 and EU Stage IIIA is also available. |
Optional Tier 3 engine package emits equivalent to U.S. EPA Tier 3 and EU Stage IIIA. |
Optional engine with emissions equivalent to U.S. EPA Tier 3 and EU stage IIIA is also available. |
Operating Specifications |
| Nominal Payload Capacity |
22487 lb |
37920 lb |
44092 lb |
| Gross Machine Mass |
97453 lb |
155095 lb |
180779 lb |
| Static Tipping Load - Straight Ahead - Lift Arms Horizontal |
57110 lb |
88015 lb |
104199 lb |
| Static Tipping Load - Full Turn - Lift Arms Horizontal |
46067 lb |
75109 lb |
- |
| Breakout Force - Tilt (ISO) |
39524 lb |
- |
- |
| Breakout Force - Lift (ISO) |
42333 lb |
- |
- |
| Breakout Force - SAE |
- |
60298 lb |
61773 lb |
| Static Tipping Full Turn Ahead Lift Arms Horizontal |
- |
- |
88191 lb |
Weights |
| Operating Mass* |
66469 lb |
110692 lb |
128448 lb |
| Operating Mass* - Front Axle |
28404 lb |
50832 lb |
54558 lb |
| Operating Mass* - Rear Axle |
38065 lb |
59860 lb |
73853 lb |
| Operating Mass + Rated Payload* |
88956 lb |
148611 lb |
172540 lb |
| Operating Mass + Rated Payload* - Front Axle |
62011 lb |
110716 lb |
125187 lb |
| Operating Mass + Rated Payload* - Rear Axle |
26944 lb |
37895 lb |
47316 lb |
| Note |
*Calculated weights. |
*Calculated Weight. |
*Calculated weight. |
Transmission |
| Forward - 1 |
2.8 mile/h |
3.4 mile/h |
3 mile/h |
| Forward - 2 |
5.6 mile/h |
6 mile/h |
5.7 mile/h |
| Forward - 3 |
10.4 mile/h |
10.7 mile/h |
10.2 mile/h |
| Forward - 4 |
17.1 mile/h |
18.5 mile/h |
17.5 mile/h |
| Reverse - 1 |
3.1 mile/h |
4.1 mile/h |
4.1 mile/h |
| Reverse - 2 |
6.8 mile/h |
7.3 mile/h |
7.1 mile/h |
| Reverse - 3 |
11.8 mile/h |
13 mile/h |
12.7 mile/h |
| Reverse - 4 |
18.2 mile/h |
22 mile/h |
19.4 mile/h |
Hydraulic Cycle Times |
| Raise |
7.6 s |
9.2 s |
8.8 s |
| Dump |
1.6 s |
3.4 s |
1.85 s |
| Lower, Empty, Float Down |
2 s |
3.1 s |
3.54 s |
| Total Cycle Time |
11.2 s |
15.7 s |
14.2 s |
Bucket Capacities |
| Bucket Capacities |
4.2-5.9 m³ (5.5-7.7 yd³) |
- |
8.9-11.6 m³ (11.6-15.2 yd³) |
| Dump Bucket - 1 |
5.5 yd³ |
8.2 yd³ |
- |
| Dump Bucket - 2 - Standard Bucket |
6.3 yd³ |
- |
- |
| Dump Bucket - 3 |
7.3 yd³ |
10.9 yd³ |
13.7 yd³ |
| Dump Bucket - 4 |
7.7 yd³ |
11.6 yd³ |
- |
| Ejector Bucket |
6.3 yd³ |
- |
- |
| Bolt Together Bucket |
6.9 yd³ |
- |
- |
| Bucket Capacity |
- |
6.3-8.9 m³ (8.2-11.6 yd³) |
- |
| Dump Bucket - 2 |
- |
9.4 yd³ |
12.4 yd³ |
| Dump Bucket - 1 - Standard Bucket |
- |
- |
11.6 yd³ |
| Light Material Bucket |
- |
- |
15.2 yd³ |
Turning Dimensions |
| Outside Clearance Radius* |
261.3 in |
- |
- |
| Inner Clearance Radius* |
129.6 in |
- |
- |
| Axle Oscillation |
10° |
8° |
8 ° |
| Articulation Angle |
42.5° |
42.5° |
42.5 ° |
| Note |
*Clearance dimensions are for reference only. |
- |
**Clearance dimensions are for reference only. |
| Outside Clearance Radius |
- |
288.3 in |
- |
| Inner Clearance Radius |
- |
133.2 in |
- |
| Outside Clearance Radius** |
- |
- |
296.7 in |
| Inner Clearance Radius** |
- |
- |
127.8 in |
Tires |
| Tire Size |
18 × R25 |
29.5 × 29 |
35/65 R33 |
Service Refill Capacities |
| Engine Crankcase - With Filter |
8.98 gal (US) |
- |
- |
| Transmission |
12.4 gal (US) |
16.4 gal (US) |
16.4 gal (US) |
| Hydraulic Tank |
33 gal (US) |
37 gal (US) |
37 gal (US) |
| Cooling System |
16.1 gal (US) |
19.8 gal (US) |
19.8 gal (US) |
| Front Differential and Final Drives |
21.1 gal (US) |
31.4 gal (US) |
31.4 gal (US) |
| Rear Differential and Final Drives |
21.1 gal (US) |
33.5 gal (US) |
33.5 gal (US) |
| Fuel Tank |
105.7 gal (US) |
- |
406.5 gal (US) |
| Secondary Fuel Tank - If Equipped |
87.2 gal (US) |
- |
- |
| Engine Crankcase |
- |
9 gal (US) |
9 gal (US) |
| Front Differential and Final Drives - With Axle Oil Cooling System |
- |
42 gal (US) |
42 gal (US) |
| Rear Differential and Final Drives - With Axle Oil Cooling System |
- |
44.1 gal (US) |
44.1 gal (US) |
| Fuel Tank - Dual |
- |
376.4 gal (US) |
- |
Standards |
| Standards |
ROPS/FOPS Certified Cab |
- |
Rollover Protective Structure (ROPS)/Falling Object Protective Structure (FOPS) Certified Cab |
| Brakes |
- |
ISO 3450, AS2958.1, CAN-CSA424.30-M90 |
- |
| Cab - FOPS |
- |
ISO 3449, SAE J231, AS2294.3, EN13627 |
- |
| Cab - ROPS |
- |
ISO 3471, SAE J1040, AS2294.2, EN13510 |
- |
