Compare Equipment Go Back

R1600H Underground Mining Loader
R2900G Underground Mining Loader

Engine

Engine Model Cat® C11 Cat® C15 -
Engine Power - Tier 3 Engine - ISO 14396:2002 271 HP 401 HP -
Engine Power - VR Engine - ISO 14396:2002 271 HP 401 HP -
Bore 5.1 in 5.4 in -
Stroke 5.5 in 6.8 in -
Displacement 680.4 in³ 927.9 in³ -
Note (1) Power ratings apply at a rated speed of 1,800 rpm when tested under the reference conditions for the specified standard. Power ratings apply at a rated speed of 1,800 rpm when tested under the reference conditions for the specified standard. -
Note (2) All rating conditions are based on ISO/TR14396:2002, inlet air standard conditions with a total barometric pressure of 100 kPa (29.5 in Hg), with a vapor pressure of 1 kPa (0.295 in Hg), and 25° C (77° F). Performance measured using fuel to EPA specificat All rating conditions are based on ISO/TR14396:2002, inlet air standard conditions with a total barometric pressure of 100 kPa (29.5 in Hg), with a vapor pressure of 1 kPa (0.295 in Hg), and 25° C (77° F). Performance measured using fuel to EPA specificat -
Note (3) No engine derating required up to 3048 m (10,000 ft) for Tier 3 Engine and 1828 m (6,000 ft) for VR Engine. No engine derating required up to 591 m (1,938 ft) altitude. -
Note (4) Optional Ventilation Reduction package available. Optional Ventilation Reduction Package available. -
Note (5) Optional engine with emissions equivalent to U.S. EPA Tier 3 and EU Stage IIIA is also available. Optional Tier 3 engine package emits equivalent to U.S. EPA Tier 3 and EU Stage IIIA. -

Operating Specifications

Nominal Payload Capacity 22487 lb 37920 lb -
Gross Machine Mass 97453 lb 155095 lb -
Static Tipping Load - Straight Ahead - Lift Arms Horizontal 57110 lb 88015 lb -
Static Tipping Load - Full Turn - Lift Arms Horizontal 46067 lb 75109 lb -
Breakout Force - Tilt (ISO) 39524 lb - -
Breakout Force - Lift (ISO) 42333 lb - -
Breakout Force - SAE - 60298 lb -

Weights

Operating Mass* 66469 lb 110692 lb -
Operating Mass* - Front Axle 28404 lb 50832 lb -
Operating Mass* - Rear Axle 38065 lb 59860 lb -
Operating Mass + Rated Payload* 88956 lb 148611 lb -
Operating Mass + Rated Payload* - Front Axle 62011 lb 110716 lb -
Operating Mass + Rated Payload* - Rear Axle 26944 lb 37895 lb -
Note *Calculated weights. *Calculated Weight. -

Transmission

Forward - 1 2.8 mile/h 3.4 mile/h -
Forward - 2 5.6 mile/h 6 mile/h -
Forward - 3 10.4 mile/h 10.7 mile/h -
Forward - 4 17.1 mile/h 18.5 mile/h -
Reverse - 1 3.1 mile/h 4.1 mile/h -
Reverse - 2 6.8 mile/h 7.3 mile/h -
Reverse - 3 11.8 mile/h 13 mile/h -
Reverse - 4 18.2 mile/h 22 mile/h -

Hydraulic Cycle Times

Raise 7.6 s 9.2 s -
Dump 1.6 s 3.4 s -
Lower, Empty, Float Down 2 s 3.1 s -
Total Cycle Time 11.2 s 15.7 s -

Bucket Capacities

Bucket Capacities 4.2-5.9 m³ (5.5-7.7 yd³) - -
Dump Bucket - 1 5.5 yd³ 8.2 yd³ -
Dump Bucket - 2 - Standard Bucket 6.3 yd³ - -
Dump Bucket - 3 7.3 yd³ 10.9 yd³ -
Dump Bucket - 4 7.7 yd³ 11.6 yd³ -
Ejector Bucket 6.3 yd³ - -
Bolt Together Bucket 6.9 yd³ - -
Bucket Capacity - 6.3-8.9 m³ (8.2-11.6 yd³) -
Dump Bucket - 2 - 9.4 yd³ -

Turning Dimensions

Outside Clearance Radius* 261.3 in - -
Inner Clearance Radius* 129.6 in - -
Axle Oscillation 10° -
Articulation Angle 42.5° 42.5° -
Note *Clearance dimensions are for reference only. - -
Outside Clearance Radius - 288.3 in -
Inner Clearance Radius - 133.2 in -

Tires

Tire Size 18 × R25 29.5 × 29 -

Service Refill Capacities

Engine Crankcase - With Filter 8.98 gal (US) - -
Transmission 12.4 gal (US) 16.4 gal (US) -
Hydraulic Tank 33 gal (US) 37 gal (US) -
Cooling System 16.1 gal (US) 19.8 gal (US) -
Front Differential and Final Drives 21.1 gal (US) 31.4 gal (US) -
Rear Differential and Final Drives 21.1 gal (US) 33.5 gal (US) -
Fuel Tank 105.7 gal (US) - -
Secondary Fuel Tank - If Equipped 87.2 gal (US) - -
Engine Crankcase - 9 gal (US) -
Front Differential and Final Drives - With Axle Oil Cooling System - 42 gal (US) -
Rear Differential and Final Drives - With Axle Oil Cooling System - 44.1 gal (US) -
Fuel Tank - Dual - 376.4 gal (US) -

Standards

Standards ROPS/FOPS Certified Cab - -
Brakes - ISO 3450, AS2958.1, CAN-CSA424.30-M90 -
Cab - FOPS - ISO 3449, SAE J231, AS2294.3, EN13627 -
Cab - ROPS - ISO 3471, SAE J1040, AS2294.2, EN13510 -
Add a Similar Product:
  • R3000H Underground Mining Loader Add
  • R1300G Underground Mining Loader Add
  • R1700 Underground Mining Loader Add