Compare

Compare Equipment Go Back

Weights
	775G Off-Highway Truck View Product	770 Off-Highway Truck View Product Remove	789 Next Generation View Product Remove	798 AC Electric Drive Mining Truck View Product Remove
LRC Bare Chassis Weight without Hoist	75118 lb	-	-	-
LRC Bare Chassis Weight with Hoist	76326 lb	-	-	-
LRC Gross Vehicle Weight (Target) without Hoist	246503 lb	-	-	-
LRC Gross Vehicle Weight (Target) with Hoist	246503 lb	-	-	-
HRC Bare Chassis Weight without Hoist	76573 lb	-	-	-
HRC Bare Chassis Weight with Hoist	77781 lb	-	-	-
HRC Gross Vehicle Weight (Target) without Hoist	246503 lb	-	-	-
HRC Gross Vehicle Weight (Target) with Hoist	246503 lb	-	-	-
Note	LRC model is offered for lesser regulated countries. HRC model is offered for highly regulated countries. U.S. EPA Tier 4 Final / EU Stage V available for applicable markets.	-	-	-
ROPS
Tractor ROPS	85288 lb	-	-	-
ROPS Standards	-	Rollover Protective Structure (ROPS) for cab offered by Caterpillar meets ISO 3471:2008 ROPS criteria.	-	-
FOPS Standards	-	Falling Objects Protective Structure (FOPS) meets ISO 3449:2005 Level II FOPS criteria.	-	-
Operating Specifications
Nominal Water Tank Capacity	15000 gal (US)	-	-	-
Nominal Payload Class (100%)	-	42.1 ton (US)	-	-
Top Speed - Loaded	-	45.8 mile/h	-	-
Target Payload (100%)	-	42.1 ton (US)	-	-
Maximum Working Payload (110%)	-	46.3 ton (US)	-	-
Maximum Allowable Payload (120%)*	-	50.5 ton (US)	-	-
Body Capacity - SAE 2:1	-	32.9 yd³	-	-
Note (1)	-	*Refer to Caterpillar 10/10/20 Payload Policy for maximum gross machine weight limitations.	-	-
Note (2)	-	Target payload and capacity based on Dual Slope body with no liner. Attachment selection will affect payload and maximum gross machine operating weight.	-	-
Steering
Steering Standards	ISO 5010:2007	ISO 5010:2007	ISO 5010:2007	Steering Standards: ISO 5010:2007
Steer Angle	31 °	40.5 °	36.07 °	39 °
Turning Diameter	77.1 ft	-	-	-
Turning Circle - Clearance Diameter	85.6 ft	66.6 ft	-	-
Turning Diameter - Front	-	57.7 ft	-	106.3 ft
Note	-	Target gross machine operating weight is 71 214 kg (157,000 lb).	-	Turning Diameter (ISO 7457:1997)
Engine
Engine Model	Cat® C27	Cat® C15	Cat® 3516E	Cat® C175-16
Gross Power - SAE J1995	825 HP	515 HP	-	3500 HP
Rated Net Power - SAE J1349	683 HP	-	-	-
Bore	5.4 in	5.4 in	6.7 in	6.9 in
Stroke	6 in	6.7 in	8.5 in	8.7 in
Displacement	1648 in³	927.6 in³	4766 in³	5187 in³
Note	Net Power advertised is the power available at the flywheel when the engine is equipped with air intake system, exhaust system, and alternator. Specifications shown are for LRC model.	-	-	-
Rated Engine Speed	-	1700 r/min	-	-
Net Power - SAE J1349	-	477 HP	-	3405 HP
Net Power - ISO 9249	-	477 HP	-	-
Net Power - 80/1269/EEC	-	489 HP	-	-
Net Power - ISO 14396	-	508 HP	-	-
Net Torque - SAE J1349	-	1834 ft·lbf	-	-
Number of Cylinders	-	6	-	-
Note (1)	-	Power rating applies at 1,700 rpm when tested under the specified condition for the specified standard.	Net Power advertised is the power available at the flywheel when the engine is equipped with air intake system, exhaust system, and alternator.	Net Power advertised is the power available at the flywheel when the engine is equipped with air intake system, exhaust system, and alternator.
Note (2)	-	Ratings based on SAE J1995 standard air conditions of 25° C (77° F) and 100 kPa (29.61 Hg) barometer. Power based on fuel having API gravity of 35 at 16° C (60° F) and an LHV of 42 780 kJ/kg (18,390 BTU/lb) when engine used at 30° C (86° F).	Optional 1417 kW / 1,900 HP engine rating.	U.S. EPA Tier 4 Final / EU Stage V available for applicable markets.
Note (3)	-	No engine derating required up to 3000 m (9,843 ft) altitude.	U.S. EPA Tier 4 Final / EU Stage V optional engine available for applicable markets.	Additional fuel optimized selectable power ratings: 2312 kW / 3,100 hp
Note (4)	-	Meets Japan Small Volume Exemption.	-	-
Emissions	-	Meets U.S. EPA Tier 4 and EU Stage V emission standards.	-	-
Gross Power - SAE J1995:2014	-	-	2100 HP	-
Net Power - SAE J1349:2011	-	-	1975 HP	-
Rated Speed	-	-	1650 r/min	1800 r/min
Emissions Rating	-	-	Fuel Optimized	Fuel Optimized
Optional Gross Power - SAE J1995	-	-	-	3100 HP
Transmission
Forward - 1	6.6 mile/h	7.4 mile/h	7.8 mile/h	-
Forward - 2	9.3 mile/h	10.1 mile/h	10.6 mile/h	-
Forward - 3	12.6 mile/h	13.8 mile/h	14.4 mile/h	-
Forward - 4	16.8 mile/h	18.5 mile/h	19.4 mile/h	-
Forward - 5	22.8 mile/h	25.1 mile/h	26.3 mile/h	-
Forward - 6	30.7 mile/h	33.8 mile/h	35.5 mile/h	-
Forward - 7	41.6 mile/h	45.8 mile/h	-	-
Reverse	8.7 mile/h	8.8 mile/h	7.3 mile/h	-
Note	Maximum travel speeds with standard 24.00R35 (E4) tires	Maximum travel speeds with standard 18.00R33 (E4) tires.	-	-
Top Speed - Loaded	-	-	35.5 mile/h	-
Brakes
Brake Surface - Front	257 in²	216 in²	-	-
Brake Surface - Rear	9497 in²	6235 in²	-	-
Brake Standards	-	ISO 3450:2011	-	-
Note	-	Target gross machine operating weight is 71 214 kg (157,000 lb).	-	-
Service Refill Capacities
Fuel Tank Capacity	210 gal (US)	-	-	-
Cooling System	45 gal (US)	33 gal (US)	180 gal (US)	211 gal (US)
Crankcase	24 gal (US)	17 gal (US)	77 gal (US)	82 gal (US)
Differential - Final Drives	38 gal (US)	47 gal (US)	-	-
Steering System - Including Tank	14 gal (US)	23 gal (US)	-	-
Brake/Hoist Hydraulic Tank	46.5 gal (US)	38 gal (US)	-	-
Brake Hoist System	85 gal (US)	60 gal (US)	169 gal (US)	-
Fuel Tank	-	140 gal (US)	1000 gal (US)	1300 gal (US)
Steering Tank	-	14.5 gal (US)	-	-
Torque Converter - Transmission System	-	17 gal (US)	-	-
DEF Tank	-	6 gal (US)	-	-
Fuel Tank - Standard	-	-	550 gal (US)	-
Fuel Tank (Tier 4)	-	-	55 gal (US)	1200 gal (US)
Diesel Exhaust Fluid Tank	-	-	62 gal (US)	100 gal (US)
Front Wheels - Each	-	-	5.8 gal (US)	-
Differentials	-	-	161 gal (US)	-
Steering System	-	-	42 gal (US)	-
Steering System - Includes Tank	-	-	46 gal (US)	-
Brake Hoist System - Includes Tank	-	-	347 gal (US)	-
Torque Converter - Transmission System - Including Sump	-	-	55 gal (US)	-
Final Drive - Each	-	-	-	67 gal (US)
Hydraulic System - Including Tank	-	-	-	385 gal (US)
Hydraulic Tank	-	-	-	296 gal (US)
Grease Tank	-	-	-	90 lb
Note (1)	-	-	-	DEF Tank only available for U.S. EPA Tier 4 Final / EU Stage V engine option
Weights - Approximate
Target Gross Machine Operating Weight	-	157000 lb	-	-
Target Gross Machine Weight	-	157000 lb	-	-
Chassis Weight	-	55948 lb	-	453826 lb
Body Weight	-	17306 lb	60406 lb	-
Note (1)	-	Chassis weight with 100% fuel, hoist, body mounting group, rims, and tires.	Consult your tire manufacturer for maximum tire load	Consult your tire manufacturer for maximum tire load.
Note (2)	-	Body weight is the standard Dual Slope body with no liner and will vary depending on configuration.	Chassis weight with full fuel and fluids, standard and mandatory attachments, hoist, body mounting group, rims, and tires.	Chassis weight with 100% fuel, hoist, body mounting group, rims, and tires.
Nominal Rated Payload	-	-	213 ton (US)	410 ton (US)
Rated Gross Machine Weight	-	-	715000 lb	1375000 lb
Body Weight Range	-	-	-	38 833 - 43 275 kg (85,611 - 95,406 lb)
Note (3)	-	-	-	Body weight varies depending on how body is equipped.
Final Drives
Differential Ratio	-	1.92:1	2.35:1	-
Planetary Ratio	-	4.80:1	10.83:1	-
Total Reduction Ratio	-	9.26:1	25.46:1	-
Type	-	-	Double reduction, planetary with full floating axles	-
Body Hoists
Pump Flow - High Idle	-	118 gal/min	106.5 gal/min	257.3 gal/min
Relief Valve Setting - Raise	-	2750 psi	2749 psi	3029 psi
Relief Valve Setting - Lower	-	500 psi	-	-
Body Raise Time - High Idle	-	7.5 s	14 s	21 s
Body Lower Time - Float	-	10 s	16 s	22 s
Body Power Down - High Idle	-	10 s	-	-
Type	-	-	Twin, two-stage hydraulic cylinders with snubbing valve.	Twin, two-stage hydraulic cylinders with snubbing valve.
Body Power Down- High Idle	-	-	-	17.5 s
Note (1)	-	-	-	Twin, two-stage hydraulic cylinders mounted outside main frame; double-acting cylinders in both stages.
Note (2)	-	-	-	Power raise in both stages; power down capability in both stages.
Note (3)	-	-	-	Automatic body-lower modulation reduces impact on frame.
Capacity - Dual Slope - 100% Fill Factor
Struck	-	23.01 yd³	-	-
Heaped (SAE 2:1)*	-	32.9 yd³	-	-
Note (2)	-	*ISO 6483:1980.	-	-
Note (1)	-	Contact your local Cat dealer for body recommendation.	-	-
Capacity - Flat Floor - 100% Fill Factor
Struck	-	23.01 yd³	-	-
Heaped (SAE 2:1)*	-	32.9 yd³	-	-
Note (1)	-	Contact your local Cat dealer for body recommendation.	-	-
Note (2)	-	*ISO 6483:1980.	-	-
Weight Distributions - Approximate
Front Axle - Empty	-	49 %	50%	47 %
Front Axle - Loaded	-	34 %	33%	33 %
Rear Axle - Empty	-	51 %	50%	53 %
Rear Axle - Loaded	-	66 %	67%	67 %
Note	-	-	-	Weight distributions optimized with Cat body.
Suspension
Empty Loaded Cylinder Stroke Front	-	9.2 in	-	-
Empty Loaded Cylinder Stroke Rear	-	5.9 in	-	-
Rear axle - Oscillation	-	8.9 °	+/- 5 degrees	-
Type	-	-	Self-contained nitrogen/oil cylinders, pin-to-pin mounting, top and bottom double shear clevis attachments	Self-contained nitrogen/oil cylinders, pin-to-pin mounting, top & bottom double shear clevis attachments
Effective Cylinder Stroke - Front	-	-	4.12 in	10 in
Effective Cylinder Stroke - Rear	-	-	3.67 in	5 in
Tires
Standard Tire	-	18.00R33 (E4)	-	-
Note (1)	-	Productive capabilities of the 770G truck are such that, under certain job conditions, TKPH (TMPH) capabilities of standard or optional tires could be exceeded and, therefore, limit production.	Quick Change Rims optional	Quick Change Rims optional.
Note (2)	-	Caterpillar recommends the customer evaluates all job conditions and consults the tire manufacturer for proper tire selection.	Caterpillar recommends the customer evaluate all job conditions and consult tire manufacturer for proper tire selection and TKPH (TMPH) capabilities.	Caterpillar recommends the customer evaluate all job conditions and consult tire manufacturer for proper tire selection and TKPH (TMPH) capabilities.
Standard Tires	-	-	37 R57	59/80 R63
Optional Tires	-	-	40 R57	-
Optional Tire	-	-	42/90 R57	-
Rims	-	-	29” x 57” Rims	44" x 63" Rims
Sound
Sound Standards (1)	-	Hearing protection may be needed when operating with open operator station & cab for extended periods or in noisy environment.	-	-
Sound Standards (2)	-	Exterior sound pressure power level for standard machine measured according to tests specified in ISO 6395:2008 is 116 dB(A).	-	-
Sound Standards (3)	-	Operator Equivalent Sound Pressure Level is 79 dB(A) & 74 dB(A) with EU sound suppression applied when ISO 6396:2008 is used.	-	-
Sound Standards	-	-	-	The operator sound pressure level, 75 dB(A), measured according to ISO 6394:2008 and ISO 6396:2008.
Dimensions
Height - Top of ROPS	-	12.7 ft	-	-
Overall Body Length	-	26.8 ft	-	-
Inside Body Length	-	18.5 ft	-	-
Overall Length	-	28.9 ft	-	-
Wheel Base	-	13 ft	-	-
Rear Axle - Tail	-	8.5 ft	-	-
Ground Clearance	-	1.6 ft	-	-
Dump Clearance	-	1.7 ft	-	-
Loading Height - Empty	-	10.3 ft	-	-
Inside Body Depth - Maximum	-	4.6 ft	-	-
Overall Height - Body Raised	-	27.1 ft	-	-
Operating Width	-	15.7 ft	-	-
Centerline Front Tire Width	-	10.2 ft	-	-
Engine Guard Clearance	-	1.8 ft	-	-
Outside Body Width	-	12.9 ft	-	-
Inside Body Width	-	11.9 ft	-	-
Front Canopy Height	-	13.5 ft	-	-
Rear Axle - Clearance	-	1.8 ft	-	-
Centerline of Rear Dual Tire Width	-	8.3 ft	-	-
Overall Tire Width	-	12.1 ft	-	-
Braking System
Service Brakes	-	-	Four-Corner, Wet Disc, Oil Cooled, Hydraulically Actuated	Four-Corner, Wet Disc, Oil Cooled, Hydraulically Actuated
Front Wet Disc Brake Surface Area	-	-	12662 in²	22642 in²
Rear - Wet Disc Brake Surface Area	-	-	20861 in²	32730 in²
Standards	-	-	(Service and Secondary) ISO 3450:2011	Service and Secondary: ISO 3450:2011
Parking Brake	-	-	Four-corner, Multi-disc, Spring applied, Hydraulically Released	-
Electric Retarding	-	-	-	Radial Grid Design
Dynamic Retarding Power - Continuous	-	-	-	5480 HP
Parking Brakes	-	-	-	Four-corner, Multi-disc, Spring Applied, Hydraulically Released
Load Brake	-	-	-	Rear service brakes
Note	-	-	-	Anti-Lock Brake System (ABS) optional with CMD package
Capacity - HP Body - 100% Fill Factor
Struck	-	-	77 m3(101 yd3)	-
Heaped (SAE 2:1)*	-	-	143 m3(187 yd2)	-
Note (1)	-	-	Consult your local Cat dealer for body recommendations	-
Cab
Air Conditioning	-	-	(HFC - 134A refrigerant) 24,500 Btu/hr	HFC - 134A refrigerant: 21,600 Btu/h
Heater / Defroster	-	-	33300 Btu/h	24600 Btu/h
ROPS Standards (1)	-	-	The operator sound pressure level, 77 dB(A) with direct drive and 75 dB(A) with optional clutch, tested to ISO 6396:2008.	ROPS (Rollover Protective Structure) meets ISO 3471:2008 for Operator and ISO 13459:2012 for Trainer.
ROPS Standards (2)	-	-	ROPS (Rollover Protective Structure) meets ISO 3471:2008 for Operator and ISO 13459:2012 for Trainer.	-
FOPS Standards	-	-	FOPS (Falling Objects Protective Structure) meets ISO 3449:2005 Level II for Operator and ISO 13459:2012 Level II for Trainer.	FOPS (Falling Objects Protective Structure) meets ISO 3449:2005 Level II for Operator and ISO 13459:2012 Level II for Trainer.
Note	-	-	-	Ambient capabilities down to -15C (5F) for heater/defroster and up to 50C (122F) for air conditioning.
Dimensions (Approximate)
Height - Top of ROPS	-	-	5550 mm	22.1 ft
Overall Body Length	-	-	12945 mm	-
Inside Body Length	-	-	8730 mm	-
Overall Length	-	-	12970 mm	51.44 ft
Wheel Base	-	-	57000 mm	21.9 ft
Rear Axle - Tail	-	-	3856 mm	16.07 ft
Ground Clearance	-	-	1304 mm	-
Dump Clearance	-	-	1585 mm	-
Loading Height - Empty	-	-	6147 mm	25.54 ft
Rear Sidewall Height	-	-	1010 mm	-
Inside Body Depth - Maximum	-	-	3075 mm	-
Overall Height - Body Raised	-	-	11534 mm	48.85 ft
Operating Width	-	-	7822 mm	-
Centerline Front Tire Width	-	-	5410 mm	23.06 ft
Engine Guard Clearance	-	-	1290 mm	-
Overall Canopy Width	-	-	7769 mm	-
Outside Body Width	-	-	7123 mm	-
Inside Body Width	-	-	6920 mm	29.44 ft
Front Canopy Height	-	-	6739 mm	-
Rear Axle - Clearance	-	-	1263 mm	-
Centerline of Rear Dual Tire Width	-	-	4695 mm	19.5 ft
Overall Tire Width	-	-	7120 mm	-
Dump Clearance - Empty	-	-	-	5.72 ft
Front Axle Clearance - Loaded	-	-	-	2.81 ft
Overall Canopy Width (with rock deflectors)	-	-	-	33.15 ft
Outside Body/Canopy Width (without rock deflectors)	-	-	-	31.62 ft
Front Canopy Height - Empty	-	-	-	26.01 ft
Rear Axle Clearance - Loaded	-	-	-	2.8 ft
Overall Tire Width - Empty	-	-	-	30.27 ft
Overall Length (High Altitude only)	-	-	-	51.87 ft
Note	-	-	-	Dimensions listed includes canopy deflectors
Service Refill Capacities - High Altitude Only
Fuel Tank	-	-	-	2000 gal (US)
Cooling System	-	-	-	273 gal (US)
Crankcase	-	-	-	124 gal (US)
Hydraulic Tank	-	-	-	273 gal (US)
Hydraulic System (includes tank)	-	-	-	342 gal (US)
AC Drive System
Total Reduction Ratio	-	-	-	35:01:00
Top Speed - Loaded	-	-	-	40 mile/h
Generator/Alternator	-	-	-	Brushless, engine mounted, dual bearing
Controls	-	-	-	IGBT Inverter Technology, air cooled, pressurized cabinet with filtration
Wheel Motor	-	-	-	Cat high-torque AC induction, rear axle mounted
Cooling System	-	-	-	Cat variable speed, hydraulically driven cooling system
Capacity - HE Body - 100% fill factor
Struck	-	-	-	129-200 m³ (168-261 yd³)
Heaped (SAE 2:1)	-	-	-	218-276 m³ (285-361 yd³)
Note	-	-	-	Contact your local Cat dealer for body recommendations.
Engine - High Altitude Only
Engine Model	-	-	-	Cat® C175-20
Gross Power SAE J1995:2014	-	-	-	4150 HP
Net Power - SAE J1349:2011	-	-	-	4000 HP
Rated Speed	-	-	-	1750 r/min
Emissions Rating	-	-	-	Fuel Optimized
Bore	-	-	-	6.9 in
Stroke	-	-	-	8.7 in
Displacement	-	-	-	6469 in³
Note 1	-	-	-	Net Power advertised is the power available at the flywheel when the engine is equipped with air intake system, exhaust system, and alternator.
Note 2	-	-	-	Additional fuel optimized selectable power rating: 2983 kW / 4,000 hp

Compare Equipment Go Back

775G Off-Highway Truck

770 Off-Highway Truck

789 Next Generation

798 AC Electric Drive Mining Truck

Weights

ROPS

Operating Specifications

Steering

Engine

Transmission

Brakes

Service Refill Capacities

Weights - Approximate

Final Drives

Body Hoists

Capacity - Dual Slope - 100% Fill Factor

Capacity - Flat Floor - 100% Fill Factor

Weight Distributions - Approximate

Suspension

Tires

Sound

Dimensions

Braking System

Capacity - HP Body - 100% Fill Factor

Cab

Dimensions (Approximate)

Service Refill Capacities - High Altitude Only

AC Drive System

Capacity - HE Body - 100% fill factor

Engine - High Altitude Only

Earthmoving

Parts & Service

Power Systems

Technology

Contact Us