CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    775G Off-Highway Truck
    View Product
    772G Off-Highway Truck
    View Product Remove
    772 (07) Off-Highway Truck
    View Product Remove
    796 AC Electric Drive Mining Truck
    View Product Remove

    Weights
    LRC Bare Chassis Weight without Hoist 75118 lb 58414 lb - -
    LRC Bare Chassis Weight with Hoist 76326 lb 59223 lb - -
    LRC Gross Vehicle Weight (Target) without Hoist 246503 lb 180999 lb - -
    LRC Gross Vehicle Weight (Target) with Hoist 246503 lb 180999 lb - -
    HRC Bare Chassis Weight without Hoist 76573 lb 59567 lb - -
    HRC Bare Chassis Weight with Hoist 77781 lb 60376 lb - -
    HRC Gross Vehicle Weight (Target) without Hoist 246503 lb 180999 lb - -
    HRC Gross Vehicle Weight (Target) with Hoist 246503 lb 180999 lb - -
    Note LRC model is offered for lesser regulated countries. HRC model is offered for highly regulated countries. U.S. EPA Tier 4 Final / EU Stage V available for applicable markets. LRC model is offered for lesser regulated countries. HRC model is offered for highly regulated countries. U.S. EPA Tier 4 Final / EU Stage V available for applicable markets. - -

    ROPS
    Tractor ROPS 85288 lb 77430 lb - -
    FOPS Standards - - FOPS (Falling Objects Protective Structure) meets ISO 3449:2005 Level II FOPS criteria. -
    ROPS Standards - - ROPS (Rollover Protective Structure) for cab offered by Caterpillar meets ISO 3471:2008 ROPS criteria. -

    Operating Specifications
    Nominal Water Tank Capacity 15000 gal (US) 11000 gal (US) - -
    Nominal Payload Class (100%) - - 51.6 ton (US) -
    Top Speed - Loaded - - 49.2 mile/h -
    Maximum Payload Class (110%) - - 56.7 ton (US) -
    Body Capacity - SAE 2:1 - - 40.8 yd³ -
    Target Payload Capacity - - 51.6 ton (US) -
    Not to Exceed Payload (120%) - - 61.9 ton (US) -
    Body Capacity (SAE 2:1)** - - 40.8 yd³ -

    Steering
    Steering Standards ISO 5010:2007 ISO 5010:2007 ISO 5010:2007 Steering Standards: ISO 5010:2007
    Steer Angle 31 ° 31 ° 40.5 ° 39 °
    Turning Diameter 77.1 ft 57.7 ft - -
    Turning Circle - Clearance Diameter 85.6 ft 66.6 ft 66.6 ft -
    Turning Diameter - Front - - 57.7 ft 106.3 ft
    Note - - - Turning Diameter (ISO 7457:1997)

    Engine
    Engine Model Cat® C27 Cat® C18 Cat® C18 Cat® C175-16
    Gross Power - SAE J1995 825 HP 605 HP 605 HP 3500 HP
    Rated Net Power - SAE J1349 683 HP 550 HP - -
    Bore 5.4 in 5.7 in 5.7 in 6.9 in
    Stroke 6 in 7.2 in 7.2 in 8.7 in
    Displacement 1648 in³ 1105 in³ 1105 in³ 5187 in³
    Note Net Power advertised is the power available at the flywheel when the engine is equipped with air intake system, exhaust system, and alternator. Specifications shown are for LRC model. Net Power advertised is the power available at the flywheel when the engine is equipped with air intake system, exhaust system, and alternator. - -
    Rated Engine Speed - 1700 r/min 1700 r/min -
    Number of Cylinders - 6 6 -
    Net Power - SAE J1349 - - 550 HP 3405 HP
    Net Power - ISO 9249 - - 550 HP -
    Net Torque - SAE J1349 - - 2221 ft-lb -
    Engine Power - ISO 14396 - - 598 HP -
    Rated Speed - - - 1800 r/min
    Emissions Rating - - - Fuel Optimized
    Note (1) - - - Net Power advertised is the power available at the flywheel when the engine is equipped with air intake system, exhaust system, and alternator.
    Note (2) - - - U.S. EPA Tier 4 Final / EU Stage V available for applicable markets.
    Note (3) - - - Additional fuel optimized selectable power ratings: 2312 kW / 3,100 hp

    Transmission
    Forward - 1 6.6 mile/h 8 mile/h 8 mile/h -
    Forward - 2 9.3 mile/h 10.9 mile/h 10.9 mile/h -
    Forward - 3 12.6 mile/h 14.8 mile/h 14.8 mile/h -
    Forward - 4 16.8 mile/h 19.8 mile/h 19.8 mile/h -
    Forward - 5 22.8 mile/h 26.9 mile/h 26.9 mile/h -
    Forward - 6 30.7 mile/h 36.2 mile/h 36.2 mile/h -
    Forward - 7 41.6 mile/h 49.2 mile/h 49.2 mile/h -
    Reverse 8.7 mile/h 10.4 mile/h 10.4 mile/h -
    Note Maximum travel speeds with standard 24.00R35 (E4) tires Maximum travel speeds with standard 21.00R33 (E4) tires. - -

    Brakes
    Brake Surface - Front 257 in² 216 in² 216 in² -
    Brake Surface - Rear 9497 in² 7794 in² 7794 in² -
    Brake Standards - - ISO 3450:1996 -

    Service Refill Capacities
    Fuel Tank Capacity 210 gal (US) 140 gal (US) - -
    Cooling System 45 gal (US) 33 gal (US) 33 gal (US) 211 gal (US)
    Crankcase 24 gal (US) 17 gal (US) 17 gal (US) 82 gal (US)
    Differential - Final Drives 38 gal (US) 47 gal (US) 47 gal (US) -
    Steering System - Including Tank 14 gal (US) 60 gal (US) 23 gal (US) -
    Brake/Hoist Hydraulic Tank 46.5 gal (US) 38 gal (US) 38 gal (US) -
    Brake Hoist System 85 gal (US) 60 gal (US) 60 gal (US) -
    Torque Converter - Transmission System - 17 gal (US) 17 gal (US) -
    Fuel Tank - - 140 gal (US) 1300 gal (US)
    Steering Tank - - 14.5 gal (US) -
    DEF Tank - - 6 gal (US) -
    Fuel Tank (Tier 4) - - - 1200 gal (US)
    Diesel Exhaust Fluid Tank - - - 100 gal (US)
    Front Wheels - Each - - - 7 gal (US)
    Final Drive - Each - - - 67 gal (US)
    Hydraulic Tank - - - 296 gal (US)
    Hydraulic System - Including Tank - - - 385 gal (US)
    Grease Tank - - - 90 lb
    Note (1) - - - DEF Tank only available for U.S. EPA Tier 4 Final / EU Stage V engine option

    Weights - Approximate
    Target Gross Machine Operating Weight - - 181000 lb -
    Chassis Weight - - 59223 lb 448415 lb
    Body Weight - - 17306 lb -
    Target Gross Machine Weight - - 181000 lb -
    Nominal Rated Payload - - - 360 ton (US)
    Rated Gross Machine Weight - - - 1270000 lb
    Body Weight Range - - - 38 833 – 42 907 kg (85,611 – 94,594 lb)
    Note (1) - - - Consult your tire manufacturer for maximum tire load.
    Note (2) - - - Chassis weight with full fuel and fluids, standard & mandatory attachments, hoist, body mounting group, rims, and tires.
    Note (3) - - - Refer to Cat Mining Truck 10/10/20 Overload Policy (AEXQ0250) for maximum gross machine weight limitations

    Weight Distributions - Approximate
    Front Axle - Empty - - 51.4 % 47 %
    Front Axle - Loaded - - 34.2 % 33 %
    Rear Axle - Empty - - 48.6 % 53 %
    Rear Axle - Loaded - - 65.8 % 67 %
    Note - - - Weight distributions optimized with Cat body.

    Final Drives
    Differential Ratio - - 2.74:1 -
    Planetary Ratio - - 4.80:1 -
    Total Reduction Ratio - - 13.14:1 -

    Body Hoists
    Pump Flow - High Idle - - 112 gal/min 257.3 gal/min
    Relief Valve Setting - Raise - - 2750 psi 3029 psi
    Relief Valve Setting - Lower - - 500 psi -
    Body Raise Time - High Idle - - 8 s 21 s
    Body Lower Time - Float - - 10 s 22 s
    Body Power Down - High Idle - - 10 s -
    Type - - - Twin, two-stage hydraulic cylinders with snubbing valve.
    Body Power Down- High Idle - - - 17.5 s
    Note (1) - - - Twin, two-stage hydraulic cylinders mounted outside main frame; double-acting cylinders in both stages.
    Note (2) - - - Power raise in both stages; power down capability in both stages.
    Note (3) - - - Automatic body-lower modulation reduces impact on frame.

    Suspension
    Rear axle - Oscillation - - 8.9 ° +/- 5.32 degrees
    Empty Loaded Cylinder Stroke Front - - 9.2 in -
    Empty Loaded Cylinder Stroke Rear - - 5.8 in -
    Type - - - Self-contained nitrogen/oil cylinders, pin-to-pin mounting, top & bottom double shear clevis attachments
    Effective Cylinder Stroke - Front - - - 4 in
    Effective Cylinder Stroke - Rear - - - 2 in

    Capacity - Dual Slope - 100% Fill Factor
    Heaped 2:1 (SAE) - - 40.8 yd³ -
    Struck - - 31.3 yd³ -

    Capacity - Flat Floor - 100% Fill Factor
    Struck - - 31.3 yd³ -
    Heaped 2:1 (SAE) - - 40.9 yd³ -

    Sound
    Sound Standards (3) - - Operator Equivalent Sound Pressure Level (Leq) is 78 dB(A) when ISO 6396:2008 is used to measure the value for an enclosed cab. -
    Sound Standards (2) - - Exterior sound pressure power level for standard machine measured according to tests specified in ISO 6395:2008 is 118 dB(A). -
    Sound Standards (1) - - Hearing protection may be needed when operating with open operator station & cab for extended periods or in noisy environment. -
    Sound Standards - - - The operator sound pressure level, 75 dB(A), measured according to ISO 6394:2008 and ISO 6396:2008.

    Dimensions
    Height - Top of ROPS - - 12.8 ft -
    Inside Body Depth - Maximum - - 5.7 ft -
    Overall Body Length - - 26.8 ft -
    Inside Body Length - - 19 ft -
    Overall Length - - 28.9 ft -
    Wheel Base - - 13 ft -
    Rear Axle - Tail - - 9.5 ft -
    Ground Clearance - - 1.6 ft -
    Dump Clearance - - 1.5 ft -
    Loading Height - Empty - - 11.6 ft -
    Overall Height - Body Raised - - 27.1 ft -
    Operating Width - - 15.7 ft -
    Centerline Front Tire Width - - 10.4 ft -
    Engine Guard Clearance - - 2 ft -
    Outside Body Width - - 12.9 ft -
    Inside Body Width - - 11.9 ft -
    Front Canopy Height - - 13.7 ft -
    Rear Axle - Clearance - - 1.9 ft -
    Centerline of Rear Dual Tire Width - - 8.7 ft -
    Overall Tire Width - - 12.9 ft -

    Tires
    Standard Tire - - 21.00R33 (E4) -
    Standard Tires - - - 59/80 R63
    Rims - - - 44" x 63"
    Note (1) - - - Quick Change Rims optional.
    Note (2) - - - Caterpillar recommends the customer evaluate all job conditions and consult tire manufacturer for proper tire selection and TKPH (TMPH) capabilities.

    AC Drive System
    Total Reduction Ratio - - - 35:01:00
    Top Speed - Loaded - - - 40 mile/h
    Generator/Alternator - - - Cat brushless, engine mounted, dual bearing
    Controls - - - Cat IGBT Inverter Technology, air cooled, pressurized cabinet with filtration
    Wheel Motor - - - Cat AC induction, rear axle mounted
    Cooling System - - - Cat variable speed, hydraulically driven cooling system

    Braking System
    Service Brakes - - - Four-Corner, Wet Disc, Oil Cooled, Hydraulically Actuated
    Front Wet Disc Brake Surface Area - - - 20378 in²
    Rear - Wet Disc Brake Surface Area - - - 30750 in²
    Standards - - - Service and Secondary: ISO 3450:2011
    Parking Brake - - - Four-corner, Multi-disc, Spring Applied, Hydraulically Released
    Load Brake - - - Rear service brakes
    Dynamic Retarding Power - Continuous - - - 5480 HP
    Note - - - Anti-Lock Brake System (ABS) optional with CMD package

    Capacity - HE Body - 100% fill factor
    Struck - - - 97-153 m³ (127-200 yd³)
    Heaped (SAE 2:1) - - - 186-237 m³ (243-310 yd³)
    Note - - - Consult your local Cat dealer for body recommendations.

    Cab
    Air Conditioning - - - HFC - 134A refrigerant: 21,600 Btu/h
    Heater / Defroster - - - 24600 Btu/h
    Note - - - Ambient capabilities down to -15C (5F) for heater/defroster and up to 50C (122F) for air conditioning.
    ROPS Standards (1) - - - ROPS (Rollover Protective Structure) meets ISO 3471:2008 for Operator and ISO 13459:2012 for Trainer.
    FOPS Standards - - - FOPS (Falling Objects Protective Structure) meets ISO 3449:2005 Level II for Operator and ISO 13459:2012 Level II for Trainer.

    Dimensions (Approximate)
    Height - Top of ROPS - - - 22.05 ft
    Overall Length - - - 51.44 ft
    Wheel Base - - - 21.9 ft
    Rear Axle - Tail - - - 16.07 ft
    Dump Clearance - Empty - - - 5.72 ft
    Loading Height - Empty - - - 23.85 ft
    Overall Height - Body Raised - - - 48.85 ft
    Centerline Front Tire Width - - - 23.06 ft
    Front Axle Clearance - Loaded - - - 2.81 ft
    Overall Canopy Width (with rock deflectors) - - - 33.15 ft
    Outside Body/Canopy Width (without rock deflectors) - - - 31.62 ft
    Inside Body Width - - - 29.44 ft
    Front Canopy Height - Empty - - - 26.01 ft
    Rear Axle Clearance - Loaded - - - 2.8 ft
    Centerline of Rear Dual Tire Width - - - 19.5 ft
    Overall Tire Width - Empty - - - 30.27 ft
    Note - - - Dimensions listed includes canopy deflectors
    Add a Similar Product:
    • 775 Off-Highway Truck Add
    • 770 Off-Highway Truck Add
    • 798 AC Electric Drive Mining Truck Add
    • 797F Mining Truck Add
    • 794 AC Mining Truck Add
    • 785 Mining Truck (LRC, Tier 4 Final / EU Stage V) Add
    • 789 Next Generation Add
    • 793F Mining Truck Add