CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    775G Off-Highway Truck
    View Product
    798 AC Electric Drive Mining Truck
    View Product Remove
    772G Off-Highway Truck
    View Product Remove
    785 Mining Truck (LRC, Tier 4 Final / EU Stage V)
    View Product Remove

    Weights
    LRC Bare Chassis Weight without Hoist 75118 lb - 58414 lb -
    LRC Bare Chassis Weight with Hoist 76326 lb - 59223 lb -
    LRC Gross Vehicle Weight (Target) without Hoist 246503 lb - 180999 lb -
    LRC Gross Vehicle Weight (Target) with Hoist 246503 lb - 180999 lb -
    HRC Bare Chassis Weight without Hoist 76573 lb - 59567 lb -
    HRC Bare Chassis Weight with Hoist 77781 lb - 60376 lb -
    HRC Gross Vehicle Weight (Target) without Hoist 246503 lb - 180999 lb -
    HRC Gross Vehicle Weight (Target) with Hoist 246503 lb - 180999 lb -
    Note LRC model is offered for lesser regulated countries. HRC model is offered for highly regulated countries. U.S. EPA Tier 4 Final / EU Stage V available for applicable markets. - LRC model is offered for lesser regulated countries. HRC model is offered for highly regulated countries. U.S. EPA Tier 4 Final / EU Stage V available for applicable markets. -

    ROPS
    Tractor ROPS 85288 lb - 77430 lb -

    Operating Specifications
    Nominal Water Tank Capacity 15000 gal (US) - 11000 gal (US) -

    Steering
    Steering Standards ISO 5010:2007 Steering Standards: ISO 5010:2007 ISO 5010:2007 ISO 5010:2007
    Steer Angle 31 ° 39 ° 31 ° 36 °
    Turning Diameter 77.1 ft - 57.7 ft -
    Turning Circle - Clearance Diameter 85.6 ft - 66.6 ft -
    Turning Diameter - Front - 106.3 ft - -
    Note - Turning Diameter (ISO 7457:1997) - -
    Turning Diameter - ISO 7457:1997 (33.00R51 tires) - - - 97.75 ft

    Engine
    Engine Model Cat® C27 Cat® C175-16 Cat® C18 Cat� 3512E
    Gross Power - SAE J1995 825 HP 3500 HP 605 HP 1600 HP
    Rated Net Power - SAE J1349 683 HP - 550 HP -
    Bore 5.4 in 6.9 in 5.7 in 6.7 in
    Stroke 6 in 8.7 in 7.2 in 8.5 in
    Displacement 1648 in³ 5187 in³ 1105 in³ 3573 in³
    Note Net Power advertised is the power available at the flywheel when the engine is equipped with air intake system, exhaust system, and alternator. Specifications shown are for LRC model. - Net Power advertised is the power available at the flywheel when the engine is equipped with air intake system, exhaust system, and alternator. -
    Net Power - SAE J1349 - 3405 HP - 1509 HP
    Optional Gross Power - SAE J1995 - 3100 HP - -
    Rated Speed - 1800 r/min - -
    Emissions Rating - Fuel Optimized - Fuel Optimized
    Note (1) - Net Power advertised is the power available at the flywheel when the engine is equipped with air intake system, exhaust system, and alternator. - Net Power advertised is the power available at the flywheel when the engine is equipped with air intake system, exhaust system, and alternator.
    Note (2) - U.S. EPA Tier 4 Final / EU Stage V available for applicable markets. - U.S. EPA Tier 4 Final / EU Stage V available for applicable markets.
    Note (3) - Additional fuel optimized selectable power ratings: 2312 kW / 3,100 hp - Additional fuel optimized selectable power ratings: 1,450 hp
    Rated Engine Speed - - 1700 r/min -
    Number of Cylinders - - 6 -

    Transmission
    Forward - 1 6.6 mile/h - 8 mile/h 7.5 mile/h
    Forward - 2 9.3 mile/h - 10.9 mile/h 10.2 mile/h
    Forward - 3 12.6 mile/h - 14.8 mile/h 13.8 mile/h
    Forward - 4 16.8 mile/h - 19.8 mile/h 18.6 mile/h
    Forward - 5 22.8 mile/h - 26.9 mile/h 25.2 mile/h
    Forward - 6 30.7 mile/h - 36.2 mile/h 34 mile/h
    Forward - 7 41.6 mile/h - 49.2 mile/h -
    Reverse 8.7 mile/h - 10.4 mile/h 6.8 mile/h
    Note Maximum travel speeds with standard 24.00R35 (E4) tires - Maximum travel speeds with standard 21.00R33 (E4) tires. Maximum travel speeds with standard 33.00-R51 tires.
    Top Speed - Loaded - - - 34 mile/h

    Brakes
    Brake Surface - Front 257 in² - 216 in² -
    Brake Surface - Rear 9497 in² - 7794 in² -

    Service Refill Capacities
    Fuel Tank Capacity 210 gal (US) - 140 gal (US) -
    Cooling System 45 gal (US) 211 gal (US) 33 gal (US) 100 gal (US)
    Crankcase 24 gal (US) 82 gal (US) 17 gal (US) 54 gal (US)
    Differential - Final Drives 38 gal (US) - 47 gal (US) 139 gal (US)
    Steering System - Including Tank 14 gal (US) - 60 gal (US) -
    Brake/Hoist Hydraulic Tank 46.5 gal (US) - 38 gal (US) -
    Brake Hoist System 85 gal (US) - 60 gal (US) -
    Fuel Tank - 1300 gal (US) - 410 gal (US)
    Fuel Tank (Tier 4) - 1200 gal (US) - -
    Diesel Exhaust Fluid Tank - 100 gal (US) - 36 gal (US)
    Final Drive - Each - 67 gal (US) - -
    Hydraulic System - Including Tank - 385 gal (US) - -
    Hydraulic Tank - 296 gal (US) - -
    Grease Tank - 90 lb - -
    Note (1) - DEF Tank only available for U.S. EPA Tier 4 Final / EU Stage V engine option - -
    Torque Converter - Transmission System - - 17 gal (US) -
    Front Wheels - Each - - - 8 gal (US)
    Steering Tank - - - 29 gal (US)
    Steering System - Includes Tank - - - 45 gal (US)
    Brake/Hoist Tank - - - 135 gal (US)
    Brake Hoist System - Includes Tank - - - 160 gal (US)
    Torque Converter - Transmission System - Including Sump - - - 46 gal (US)

    Weights - Approximate
    Nominal Rated Payload - 410 ton (US) - -
    Rated Gross Machine Weight - 1375000 lb - -
    Chassis Weight - 453826 lb - -
    Body Weight Range - 38 833 - 43 275 kg (85,611 - 95,406 lb) - -
    Note (1) - Consult your tire manufacturer for maximum tire load. - Consult your tire manufacturer for maximum tire load
    Note (2) - Chassis weight with 100% fuel, hoist, body mounting group, rims, and tires. - Chassis weight with full fuel and fluids, standard & mandatory attachments, hoist, body mounting group, rims, and tires.
    Note (3) - Body weight varies depending on how body is equipped. - Body weight varies depending on body selection and configuration.
    Nominal Rated Payload (33.00R51 Tires) - - - 153 ton (US)
    Rated Gross Machine Weight (33.00R51 tires) - - - 550000 lb
    Nominal Rated Payload (36.00R51 Tires) - - - 157 ton (US)
    Rated Gross Machine Weight (36.00R51 tires) - - - 564000 lb
    Chassis Weight (33.00R51 Tires) - - - 186799 lb
    Chassis Weight (36.00R51 Tires) - - - 193192 lb
    Body Weight - - - 57779 lb

    Service Refill Capacities - High Altitude Only
    Fuel Tank - 2000 gal (US) - -
    Cooling System - 273 gal (US) - -
    Crankcase - 124 gal (US) - -
    Hydraulic Tank - 273 gal (US) - -
    Hydraulic System (includes tank) - 342 gal (US) - -

    AC Drive System
    Total Reduction Ratio - 35:01:00 - -
    Top Speed - Loaded - 40 mile/h - -
    Generator/Alternator - Brushless, engine mounted, dual bearing - -
    Controls - IGBT Inverter Technology, air cooled, pressurized cabinet with filtration - -
    Wheel Motor - Cat high-torque AC induction, rear axle mounted - -
    Cooling System - Cat variable speed, hydraulically driven cooling system - -

    Braking System
    Service Brakes - Four-Corner, Wet Disc, Oil Cooled, Hydraulically Actuated - Four-Corner, Wet Disc, Oil Cooled, Hydraulically Actuated
    Front Wet Disc Brake Surface Area - 22642 in² - 9487 in²
    Rear - Wet Disc Brake Surface Area - 32730 in² - 13908 in²
    Standards - Service and Secondary: ISO 3450:2011 - Service and Secondary: ISO 3450:2011
    Electric Retarding - Radial Grid Design - -
    Dynamic Retarding Power - Continuous - 5480 HP - -
    Parking Brakes - Four-corner, Multi-disc, Spring Applied, Hydraulically Released - -
    Load Brake - Rear service brakes - -
    Note - Anti-Lock Brake System (ABS) optional with CMD package - -
    Parking Brake - - - Four corner, multi disc, spring applied, hydraulically released

    Weight Distributions - Approximate
    Front Axle - Empty - 47 % - 48%
    Rear Axle - Empty - 53 % - 52%
    Front Axle - Loaded - 33 % - 33%
    Rear Axle - Loaded - 67 % - 67%
    Note - Weight distributions optimized with Cat body. - Weight distributions optimized with Cat body.

    Capacity - HE Body - 100% fill factor
    Struck - 129-200 m³ (168-261 yd³) - -
    Heaped (SAE 2:1) - 218-276 m³ (285-361 yd³) - -
    Note - Contact your local Cat dealer for body recommendations. - -

    Body Hoists
    Type - Twin, two-stage hydraulic cylinders with snubbing valve. - Twin, two-stage hydraulic cylinders with snubbing valve.
    Pump Flow - High Idle - 257.3 gal/min - 192.7 gal/min
    Relief Valve Setting - Raise - 3029 psi - 2500 psi
    Body Raise Time - High Idle - 21 s - 15.2 s
    Body Lower Time - Float - 22 s - -
    Body Power Down- High Idle - 17.5 s - 15.9 s
    Note (1) - Twin, two-stage hydraulic cylinders mounted outside main frame; double-acting cylinders in both stages. - -
    Note (2) - Power raise in both stages; power down capability in both stages. - -
    Note (3) - Automatic body-lower modulation reduces impact on frame. - -
    Body Lower Time - Float High Idle - - - 15.9 s
    Body Lower Time - Float Low Idle - - - 16.2 s

    Suspension
    Type - Self-contained nitrogen/oil cylinders, pin-to-pin mounting, top & bottom double shear clevis attachments - Self-contained nitrogen/oil cylinders, pin-to-pin mounting, top & bottom double shear clevis attachments
    Effective Cylinder Stroke - Front - 10 in - 12.6 in
    Effective Cylinder Stroke - Rear - 5 in - 6.5 in
    Rear axle - Oscillation - - - +/- 5 degrees

    Cab
    Air Conditioning - HFC - 134A refrigerant: 21,600 Btu/h - HFC - 134A refrigerant: 24,500 Btu/h
    Heater / Defroster - 24600 Btu/h - 33300 Btu/h
    Note - Ambient capabilities down to -15C (5F) for heater/defroster and up to 50C (122F) for air conditioning. - The operator sound pressure level, 77 dB(A) with direct drive and 75 dB9A) with optional clutch, tested to ISO 6396:2008.
    ROPS Standards (1) - ROPS (Rollover Protective Structure) meets ISO 3471:2008 for Operator and ISO 13459:2012 for Trainer. - ROPS (Rollover Protective Structure) meets ISO 3471:2008 for Operator and ISO 13459:2012 for Trainer.
    FOPS Standards - FOPS (Falling Objects Protective Structure) meets ISO 3449:2005 Level II for Operator and ISO 13459:2012 Level II for Trainer. - FOPS (Falling Objects Protective Structure) meets ISO 3449:2005 Level II for Operator and ISO 13459:2012 Level II for Trainer.

    Engine - High Altitude Only
    Engine Model - Cat® C175-20 - -
    Gross Power SAE J1995:2014 - 4150 HP - -
    Net Power - SAE J1349:2011 - 4000 HP - -
    Rated Speed - 1750 r/min - -
    Emissions Rating - Fuel Optimized - -
    Bore - 6.9 in - -
    Stroke - 8.7 in - -
    Displacement - 6469 in³ - -
    Note 1 - Net Power advertised is the power available at the flywheel when the engine is equipped with air intake system, exhaust system, and alternator. - -
    Note 2 - Additional fuel optimized selectable power rating: 2983 kW / 4,000 hp - -

    Tires
    Rims - 44" x 63" Rims - 610 mm (24") Rims (standard). 660 mm (26") Rims (optional).
    Standard Tires - 59/80 R63 - -
    Note (1) - Quick Change Rims optional. - Quick Change Rims optional.
    Note (2) - Caterpillar recommends the customer evaluate all job conditions and consult tire manufacturer for proper tire selection and TKPH (TMPH) capabilities. - Caterpillar recommends the customer evaluate all job conditions and consult tire manufacturer for proper tire selection and TKPH (TMPH) capabilities.
    Standard Tire - - - 33.00R51
    Optional Tire - - - 36.00R51

    Dimensions (Approximate)
    Height - Top of ROPS - 22.1 ft - -
    Overall Length - 51.44 ft - -
    Wheel Base - 21.9 ft - -
    Rear Axle - Tail - 16.07 ft - -
    Dump Clearance - Empty - 5.72 ft - -
    Loading Height - Empty - 25.54 ft - -
    Overall Height - Body Raised - 48.85 ft - -
    Centerline Front Tire Width - 23.06 ft - -
    Front Axle Clearance - Loaded - 2.81 ft - -
    Overall Canopy Width (with rock deflectors) - 33.15 ft - -
    Outside Body/Canopy Width (without rock deflectors) - 31.62 ft - -
    Inside Body Width - 29.44 ft - -
    Front Canopy Height - Empty - 26.01 ft - -
    Rear Axle Clearance - Loaded - 2.8 ft - -
    Centerline of Rear Dual Tire Width - 19.5 ft - -
    Overall Tire Width - Empty - 30.27 ft - -
    Overall Length (High Altitude only) - 51.87 ft - -
    Note - Dimensions listed includes canopy deflectors - -

    Sound
    Sound Standards - The operator sound pressure level, 75 dB(A), measured according to ISO 6394:2008 and ISO 6396:2008. - -

    Final Drives
    Type - - - Double reduction, planetary with full floating axles.
    Differential Ratio - - - 2:10:01
    Planetary Ratio - - - 10.83:1
    Total Reduction Ratio - - - 22.75:1

    Capacity - MSD II - 100% Fill Factor
    Struck - - - 72 m^3 / 94 yd^3
    Heaped (SAE 2:1) - - - 99 m^3 / 129 yd^3
    Note - - - Consult your local Cat dealer for body recommendations.

    Dimensions (All dimensions are approximate. MSD II Body, 33R51 tires, unloaded machine.)
    Height - Top of ROPS - - - 17.09 ft
    Overall Body Length - - - 39.32 ft
    Inside Body Length - - - 27.29 ft
    Overall Length - - - 39.23 ft
    Wheel Base - - - 17 ft
    Rear Axle - Tail - - - 12.56 ft
    Ground Clearance - - - 3.29 ft
    Dump Clearance - - - 3.7 ft
    Loading Height - Empty - - - 17.39 ft
    Inside Body Depth - Maximum - - - 9.15 ft
    Overall Height - Body Raised - - - 39.48 ft
    Operating Width - - - 24.72 ft
    Centerline Front Tire Width - - - 15.91 ft
    Engine Guard Clearance - - - 3.41 ft
    Overall Canopy Width - - - 24.81 ft
    Outside Body Width - - - 22 ft
    Inside Body Width - - - 19.72 ft
    Front Canopy Height - - - 19.8 ft
    Rear Axle - Clearance - - - 3.25 ft
    Centerline of Rear Dual Tire Width - - - 14.06 ft
    Overall Tire Width - - - 20.59 ft
    Add a Similar Product:
    • 775 Off-Highway Truck Add
    • 770 Off-Highway Truck Add
    • 772 (07) Off-Highway Truck Add
    • 797F Mining Truck Add
    • 794 AC Mining Truck Add
    • 796 AC Electric Drive Mining Truck Add
    • 789 Next Generation Add
    • 793F Mining Truck Add