CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    772G Off-Highway Truck Bare Chassis
    View Product
    775G Off-Highway Truck Bare Chassis
    View Product Remove
    772 (07) Off-Highway Truck
    View Product Remove
    789 Next Generation
    View Product Remove

    Weights
    LRC Bare Chassis Weight without Hoist 58414 lb 75118 lb - -
    LRC Bare Chassis Weight with Hoist 59223 lb 76326 lb - -
    LRC Gross Vehicle Weight (Target) with Hoist 180999 lb 246503 lb - -
    LRC Gross Vehicle Weight (Target) without Hoist 180999 lb 246503 lb - -
    HRC Bare Chassis Weight without Hoist 59567 lb 76573 lb - -
    HRC Bare Chassis Weight with Hoist 60376 lb 77781 lb - -
    HRC Gross Vehicle Weight (Target) with Hoist 180999 lb 246503 lb - -
    HRC Gross Vehicle Weight (Target) without Hoist 180999 lb 246503 lb - -
    Note LRC model is offered for lesser regulated countries. HRC model is offered for highly regulated countries. U.S. EPA Tier 4 Final / EU Stage V available for applicable markets. LRC model is offered for lesser regulated countries. HRC model is offered for highly regulated countries. U.S. EPA Tier 4 Final / EU Stage V available for applicable markets. - -

    ROPS
    Tractor ROPS 77430 lb 85288 lb - -
    FOPS Standards - - FOPS (Falling Objects Protective Structure) meets ISO 3449:2005 Level II FOPS criteria. -
    ROPS Standards - - ROPS (Rollover Protective Structure) for cab offered by Caterpillar meets ISO 3471:2008 ROPS criteria. -

    Operating Specifications
    Nominal Water Tank Capacity 11000 gal (US) 15000 gal (US) - -
    Nominal Payload Class (100%) - - 51.6 ton (US) -
    Top Speed - Loaded - - 49.2 mile/h -
    Maximum Payload Class (110%) - - 56.7 ton (US) -
    Body Capacity - SAE 2:1 - - 40.8 yd³ -
    Target Payload Capacity - - 51.6 ton (US) -
    Not to Exceed Payload (120%) - - 61.9 ton (US) -
    Body Capacity (SAE 2:1)** - - 40.8 yd³ -

    Engine
    Engine Model Cat® C18 Cat® C27 Cat® C18 Cat® 3516E
    Rated Engine Speed 1700 r/min - 1700 r/min -
    Gross Power - SAE J1995 605 hp 825 hp - -
    Rated Net Power - SAE J1349 550 hp 683 hp - -
    Number of Cylinders 6 - 6 -
    Bore 5.7 in 5.4 in 5.7 in 6.7 in
    Stroke 7.2 in 6 in 7.2 in 8.5 in
    Displacement 1105 in³ 1648 in³ 1105 in³ 4766 in³
    Note Net Power advertised is the power available at the flywheel when the engine is equipped with air intake system, exhaust system, and alternator. Net Power advertised is the power available at the flywheel when the engine is equipped with air intake system, exhaust system, and alternator. Specifications shown are for LRC model. - -
    Gross Power - SAE J1995:2014 - - 605 hp 2100 hp
    Net Power - SAE J1349:2011 - - 550 hp 1975 hp
    Net Power - ISO 9249 - - 550 hp -
    Net Torque - SAE J1349 - - 2221 ft-lb -
    Engine Power - ISO 14396:2002 - - 598 hp -
    Rated Speed - - - 1650 r/min
    Emissions Rating - - - Fuel Optimized
    Note (1) - - - Net Power advertised is the power available at the flywheel when the engine is equipped with air intake system, exhaust system, and alternator.
    Note (2) - - - Optional 1417 kW / 1,900 HP engine rating.
    Note (3) - - - U.S. EPA Tier 4 Final / EU Stage V optional engine available for applicable markets.

    Transmission
    Forward - 1 8 mile/h 6.6 mile/h 8 mile/h 7.8 mile/h
    Forward - 2 10.9 mile/h 9.3 mile/h 10.9 mile/h 10.6 mile/h
    Forward - 3 14.8 mile/h 12.6 mile/h 14.8 mile/h 14.4 mile/h
    Forward - 4 19.8 mile/h 16.8 mile/h 19.8 mile/h 19.4 mile/h
    Forward - 5 26.9 mile/h 22.8 mile/h 26.9 mile/h 26.3 mile/h
    Forward - 6 36.2 mile/h 30.7 mile/h 36.2 mile/h 35.5 mile/h
    Forward - 7 49.2 mile/h 41.6 mile/h 49.2 mile/h -
    Reverse 10.4 mile/h 8.7 mile/h 10.4 mile/h 7.3 mile/h
    Note Maximum travel speeds with standard 21.00R33 (E4) tires. Maximum travel speeds with standard 24.00R35 (E4) tires - -
    Top Speed - Loaded - - - 35.5 mile/h

    Brakes
    Brake Surface - Front 216 in² 257 in² 216 in² -
    Brake Surface - Rear 7794 in² 9497 in² 7794 in² -
    Brake Standards - - ISO 3450:2011 -

    Service Refill Capacities
    Fuel Tank Capacity 140 gal (US) 210 gal (US) - -
    Cooling System 33 gal (US) 45 gal (US) 33 gal (US) 180 gal (US)
    Crankcase 17 gal (US) 24 gal (US) 17 gal (US) 77 gal (US)
    Brake/Hoist Hydraulic Tank 38 gal (US) 46.5 gal (US) 38 gal (US) -
    Brake Hoist System 60 gal (US) 85 gal (US) 60 gal (US) 169 gal (US)
    Differential - Final Drives 47 gal (US) 38 gal (US) 47 gal (US) -
    Steering System - Including Tank 60 gal (US) 14 gal (US) 23 gal (US) -
    Torque Converter - Transmission System 17 gal (US) - 17 gal (US) -
    Fuel Tank - - 140 gal (US) 1000 gal (US)
    Steering Tank - - 14.5 gal (US) -
    DEF Tank - - 6 gal (US) -
    Fuel Tank - Standard - - - 550 gal (US)
    Fuel Tank (Tier 4) - - - 55 gal (US)
    Diesel Exhaust Fluid Tank - - - 62 gal (US)
    Front Wheels - Each - - - 5.8 gal (US)
    Differentials - - - 161 gal (US)
    Steering System - - - 42 gal (US)
    Steering System - Includes Tank - - - 46 gal (US)
    Brake Hoist System - Includes Tank - - - 347 gal (US)
    Torque Converter - Transmission System - Including Sump - - - 55 gal (US)

    Steering
    Steering Standards ISO 5010:2007 ISO 5010:2007 ISO 5010:2007 ISO 5010:2007
    Steer Angle 31 ° 31 ° 40.5 ° 36.07 °
    Turning Diameter 57.7 ft 77.1 ft - -
    Turning Circle - Clearance Diameter 66.6 ft 85.6 ft 66.6 ft -
    Turning Diameter - Front - - 57.7 ft -

    Weights - Approximate
    Target Gross Machine Operating Weight - - 181000 lb -
    Chassis Weight - - 59223 lb -
    Body Weight - - 17306 lb 60406 lb
    Target Gross Machine Weight - - 181000 lb -
    Nominal Rated Payload - - - 213 ton (US)
    Rated Gross Machine Weight - - - 715000 lb
    Note (1) - - - Consult your tire manufacturer for maximum tire load
    Note (2) - - - Chassis weight with full fuel and fluids, standard and mandatory attachments, hoist, body mounting group, rims, and tires.

    Weight Distributions - Approximate
    Front Axle - Empty - - 51.4 % 50%
    Front Axle - Loaded - - 34.2 % 33%
    Rear Axle - Empty - - 48.6 % 50%
    Rear Axle - Loaded - - 65.8 % 67%

    Final Drives
    Differential Ratio - - 2.74:1 2.35:1
    Planetary Ratio - - 4.80:1 10.83:1
    Total Reduction Ratio - - 13.14:1 25.46:1
    Type - - - Double reduction, planetary with full floating axles

    Body Hoists
    Pump Flow - High Idle - - 112 gal/min 106.5 gal/min
    Relief Valve Setting - Raise - - 2750 psi 2749 psi
    Relief Valve Setting - Lower - - 500 psi -
    Body Raise Time - High Idle - - 8 s 14 s
    Body Lower Time - Float - - 10 s 16 s
    Body Power Down - High Idle - - 10 s -
    Type - - - Twin, two-stage hydraulic cylinders with snubbing valve.

    Suspension
    Rear axle - Oscillation - - 8.9 ° +/- 5 degrees
    Empty Loaded Cylinder Stroke Front - - 9.2 in -
    Empty Loaded Cylinder Stroke Rear - - 5.8 in -
    Type - - - Self-contained nitrogen/oil cylinders, pin-to-pin mounting, top and bottom double shear clevis attachments
    Effective Cylinder Stroke - Front - - - 4.12 in
    Effective Cylinder Stroke - Rear - - - 3.67 in

    Capacity - Dual Slope - 100% Fill Factor
    Heaped 2:1 (SAE) - - 40.8 yd³ -
    Struck - - 31.3 yd³ -

    Capacity - Flat Floor - 100% Fill Factor
    Struck - - 31.3 yd³ -
    Heaped 2:1 (SAE) - - 40.9 yd³ -

    Sound
    Sound Standards (3) - - Operator Equivalent Sound Pressure Level (Leq) is 78 dB(A) when ISO 6396:2008 is used to measure the value for an enclosed cab. -
    Sound Standards (2) - - Exterior sound pressure power level for standard machine measured according to tests specified in ISO 6395:2008 is 118 dB(A). -
    Sound Standards (1) - - Hearing protection may be needed when operating with open operator station & cab for extended periods or in noisy environment. -

    Dimensions
    Height - Top of ROPS - - 12.8 ft -
    Inside Body Depth - Maximum - - 5.7 ft -
    Overall Body Length - - 26.8 ft -
    Inside Body Length - - 19 ft -
    Overall Length - - 28.9 ft -
    Wheel Base - - 13 ft -
    Rear Axle - Tail - - 9.5 ft -
    Ground Clearance - - 1.6 ft -
    Dump Clearance - - 1.5 ft -
    Loading Height - Empty - - 11.6 ft -
    Overall Height - Body Raised - - 27.1 ft -
    Operating Width - - 15.7 ft -
    Centerline Front Tire Width - - 10.4 ft -
    Engine Guard Clearance - - 2 ft -
    Outside Body Width - - 12.9 ft -
    Inside Body Width - - 11.9 ft -
    Front Canopy Height - - 13.7 ft -
    Rear Axle - Clearance - - 1.9 ft -
    Centerline of Rear Dual Tire Width - - 8.7 ft -
    Overall Tire Width - - 12.9 ft -

    Tires
    Standard Tire - - 21.00R33 (E4) -
    Standard Tires - - - 37 R57
    Optional Tires - - - 40 R57
    Optional Tire - - - 42/90 R57
    Rims - - - 29” x 57” Rims
    Note (1) - - - Quick Change Rims optional
    Note (2) - - - Caterpillar recommends the customer evaluate all job conditions and consult tire manufacturer for proper tire selection and TKPH (TMPH) capabilities.

    Braking System
    Service Brakes - - - Four-Corner, Wet Disc, Oil Cooled, Hydraulically Actuated
    Front Wet Disc Brake Surface Area - - - 12662 in²
    Rear - Wet Disc Brake Surface Area - - - 20861 in²
    Standards - - - (Service and Secondary) ISO 3450:2011
    Parking Brake - - - Four-corner, Multi-disc, Spring applied, Hydraulically Released

    Capacity - HP Body - 100% Fill Factor
    Struck - - - 77 m3(101 yd3)
    Heaped (SAE 2:1)* - - - 143 m3(187 yd2)
    Note (1) - - - Consult your local Cat dealer for body recommendations

    Cab
    Air Conditioning - - - (HFC - 134A refrigerant) 24,500 Btu/hr
    Heater / Defroster - - - 33300 Btu/h
    ROPS Standards (1) - - - The operator sound pressure level, 77 dB(A) with direct drive and 75 dB(A) with optional clutch, tested to ISO 6396:2008.
    ROPS Standards (2) - - - ROPS (Rollover Protective Structure) meets ISO 3471:2008 for Operator and ISO 13459:2012 for Trainer.
    FOPS Standards - - - FOPS (Falling Objects Protective Structure) meets ISO 3449:2005 Level II for Operator and ISO 13459:2012 Level II for Trainer.

    Dimensions (Approximate)
    Height - Top of ROPS - - - 5550 mm
    Overall Body Length - - - 12945 mm
    Inside Body Length - - - 8730 mm
    Overall Length - - - 12970 mm
    Wheel Base - - - 57000 mm
    Rear Axle - Tail - - - 3856 mm
    Ground Clearance - - - 1304 mm
    Dump Clearance - - - 1585 mm
    Loading Height - Empty - - - 6147 mm
    Rear Sidewall Height - - - 1010 mm
    Inside Body Depth - Maximum - - - 3075 mm
    Overall Height - Body Raised - - - 11534 mm
    Operating Width - - - 7822 mm
    Centerline Front Tire Width - - - 5410 mm
    Engine Guard Clearance - - - 1290 mm
    Overall Canopy Width - - - 7769 mm
    Outside Body Width - - - 7123 mm
    Inside Body Width - - - 6920 mm
    Front Canopy Height - - - 6739 mm
    Rear Axle - Clearance - - - 1263 mm
    Centerline of Rear Dual Tire Width - - - 4695 mm
    Overall Tire Width - - - 7120 mm
    Add a Similar Product:
    • 775 Off-Highway Truck Add
    • 798 AC Electric Drive Mining Truck Add
    • 770 Off-Highway Truck Add
    • 797F Mining Truck Add
    • 796 AC Electric Drive Mining Truck Add
    • 794 AC Mining Truck Add
    • 793F Mining Truck Add
    • 785 Mining Truck (LRC, Tier 4 Final / EU Stage V) Add