CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    796 AC Electric Drive Mining Truck
    View Product
    772G Off-Highway Truck
    View Product Remove
    793F Mining Truck
    View Product Remove

    Weights - Approximate
    Nominal Rated Payload 360 ton (US) - 256 ton (US)
    Rated Gross Machine Weight 1270000 lb - 851000 lb
    Chassis Weight 448415 lb - 265639 lb
    Body Weight Range 38 833 – 42 907 kg (85,611 – 94,594 lb) - -
    Note (1) Consult your tire manufacturer for maximum tire load. - Consult your tire manufacturer for maximum tire load
    Note (2) Chassis weight with full fuel and fluids, standard & mandatory attachments, hoist, body mounting group, rims, and tires. - Chassis weight with full fuel and fluids, standard & mandatory attachments, hoist, body mounting group, rims, and tires.
    Note (3) Refer to Cat Mining Truck 10/10/20 Overload Policy (AEXQ0250) for maximum gross machine weight limitations - Refer to the Cat Mining Truck 10/10/20 Overload Policy for maximum gross machine weight limitations.
    Body Weight - - 67682 lb

    Engine
    Gross Power - SAE J1995 3500 HP 605 HP 2650 HP
    Engine Model Cat® C175-16 Cat® C18 Cat® C175-16
    Net Power - SAE J1349 3405 HP - 2478 HP
    Rated Speed 1800 r/min - 1750 r/min
    Emissions Rating Fuel Optimized - -
    Bore 6.9 in 5.7 in 6.9 in
    Stroke 8.7 in 7.2 in 8.7 in
    Displacement 5187 in³ 1105 in³ 5187 in³
    Note (1) Net Power advertised is the power available at the flywheel when the engine is equipped with air intake system, exhaust system, and alternator. - Net Power advertised is the power available at the flywheel when the engine is equipped with air intake system, exhaust system, and alternator.
    Note (2) U.S. EPA Tier 4 Final / EU Stage V available for applicable markets. - EPA Tier 4 Final / EU Stage V available for applicable markets.
    Note (3) Additional fuel optimized selectable power ratings: 2312 kW / 3,100 hp - -
    Rated Engine Speed - 1700 r/min -
    Rated Net Power - SAE J1349 - 550 HP -
    Number of Cylinders - 6 -
    Note - Net Power advertised is the power available at the flywheel when the engine is equipped with air intake system, exhaust system, and alternator. -
    Emissions - - Fuel Optimized

    Steering
    Steer Angle 39 ° 31 ° 36 °
    Turning Diameter - Front 106.3 ft - 93.2 ft
    Steering Standards Steering Standards: ISO 5010:2007 ISO 5010:2007 SAE J15111 OCT90, ISO 5010:1992
    Note Turning Diameter (ISO 7457:1997) - -
    Turning Diameter - 57.7 ft -
    Turning Circle - Clearance Diameter - 66.6 ft -

    Service Refill Capacities
    Fuel Tank 1300 gal (US) - 750 gal (US)
    Fuel Tank (Tier 4) 1200 gal (US) - -
    Diesel Exhaust Fluid Tank 100 gal (US) - 62 gal (US)
    Cooling System 211 gal (US) 33 gal (US) 284 gal (US)
    Crankcase 82 gal (US) 17 gal (US) 82 gal (US)
    Front Wheels - Each 7 gal (US) - -
    Final Drive - Each 67 gal (US) - -
    Hydraulic Tank 296 gal (US) - -
    Hydraulic System - Including Tank 385 gal (US) - -
    Grease Tank 90 lb - -
    Note (1) DEF Tank only available for U.S. EPA Tier 4 Final / EU Stage V engine option - DEF Tank only available for EPA Tier 4 engine option.
    Fuel Tank Capacity - 140 gal (US) -
    Brake/Hoist Hydraulic Tank - 38 gal (US) -
    Brake Hoist System - 60 gal (US) -
    Differential - Final Drives - 47 gal (US) -
    Steering System - Including Tank - 60 gal (US) 77 gal (US)
    Torque Converter - Transmission System - 17 gal (US) -
    Fuel Tank - Optional - - 1300 gal (US)
    Rear Axle - Housing - - 260 gal (US)
    Brake Hoist System - Includes Tank - - 347 gal (US)
    Torque Converter - Transmission Sump - - 27 gal (US)
    Torque Converter/Transmission System - Including Sump - - 55 gal (US)

    AC Drive System
    Total Reduction Ratio 35:01:00 - -
    Top Speed - Loaded 40 mile/h - -
    Generator/Alternator Cat brushless, engine mounted, dual bearing - -
    Controls Cat IGBT Inverter Technology, air cooled, pressurized cabinet with filtration - -
    Wheel Motor Cat AC induction, rear axle mounted - -
    Cooling System Cat variable speed, hydraulically driven cooling system - -

    Braking System
    Service Brakes Four-Corner, Wet Disc, Oil Cooled, Hydraulically Actuated - Four-Corner, Wet Disc, Oil Cooled, Hydraulically Actuated
    Front Wet Disc Brake Surface Area 20378 in² - 13921 in³
    Rear - Wet Disc Brake Surface Area 30750 in² - 20847 in³
    Standards Service and Secondary: ISO 3450:2011 - (Service and Secondary): ISO 3450:1996
    Parking Brake Four-corner, Multi-disc, Spring Applied, Hydraulically Released - -
    Load Brake Rear service brakes - Rear service brakes
    Dynamic Retarding Power - Continuous 5480 HP - -
    Note Anti-Lock Brake System (ABS) optional with CMD package - Anti-Lock Brake System (ABS) optional with CMD package
    Parking Brakes - - Four-corner, Multi-disc, Spring Applied, Hydraulically Released

    Weight Distributions - Approximate
    Front Axle - Empty 47 % - 48 %
    Rear Axle - Empty 53 % - 52 %
    Front Axle - Loaded 33 % - 33 %
    Rear Axle - Loaded 67 % - 67 %
    Note Weight distributions optimized with Cat body. - -

    Tires
    Standard Tires 59/80 R63 - 40.00 R57
    Rims 44" x 63" - 29" or 32"
    Note (1) Quick Change Rims optional. - Extended life wheel stations optional.
    Note (2) Caterpillar recommends the customer evaluate all job conditions and consult tire manufacturer for proper tire selection and TKPH (TMPH) capabilities. - Caterpillar recommends the customer evaluate all job conditions and consult tire manufacturer for proper tire selection and TKPH (TMPH) capabilities.
    Note - - Quick Change Rims optional.

    Capacity - HE Body - 100% fill factor
    Struck 97-153 m³ (127-200 yd³) - -
    Heaped (SAE 2:1) 186-237 m³ (243-310 yd³) - -
    Note Consult your local Cat dealer for body recommendations. - -

    Body Hoists
    Type Twin, two-stage hydraulic cylinders with snubbing valve. - Twin, two-stage hydraulic cylinders with snubbing valve
    Pump Flow - High Idle 257.3 gal/min - 224 gal/min
    Relief Valve Setting - Raise 3029 psi - 2955 psi
    Body Raise Time - High Idle 21 s - 19 s
    Body Lower Time - Float 22 s - 20 s
    Body Power Down- High Idle 17.5 s - -
    Note (1) Twin, two-stage hydraulic cylinders mounted outside main frame; double-acting cylinders in both stages. - -
    Note (2) Power raise in both stages; power down capability in both stages. - -
    Note (3) Automatic body-lower modulation reduces impact on frame. - -
    Body Power Down - High Idle - - 17.5 s

    Sound
    Sound Standards The operator sound pressure level, 75 dB(A), measured according to ISO 6394:2008 and ISO 6396:2008. - The operator sound pressure level measured according to work cycle procedures specified in ISO 6394 and 6396 is 76 dB(A) for cab offered by Caterpillar, when properly installed and maintained and tested with doors and windows closed.
    Sound Standards (1) - - Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in a noisy environment.

    Suspension
    Type Self-contained nitrogen/oil cylinders, pin-to-pin mounting, top & bottom double shear clevis attachments - Self-contained nitrogen/oil cylinders, pin-to-pin mounting, top & bottom double shear clevis attachments
    Effective Cylinder Stroke - Front 4 in - 5.1 in
    Effective Cylinder Stroke - Rear 2 in - 4.2 in
    Rear axle - Oscillation +/- 5.32 degrees - ±4.9 degrees

    Cab
    Air Conditioning HFC - 134A refrigerant: 21,600 Btu/h - Air Conditioning (HFC - 134A refrigerant): 24,300 Btu/hr
    Heater / Defroster 24600 Btu/h - 38900 Btu/h
    Note Ambient capabilities down to -15C (5F) for heater/defroster and up to 50C (122F) for air conditioning. - Ambient capabilities down to -30C (-22F) for heater/defroster and up to 50C (122F) for air conditioning.
    ROPS Standards (1) ROPS (Rollover Protective Structure) meets ISO 3471:2008 for Operator and ISO 13459:2012 for Trainer. - The operator sound pressure level, 76 dB(A), complies with ISO 6394 and ISO 6396.
    FOPS Standards FOPS (Falling Objects Protective Structure) meets ISO 3449:2005 Level II for Operator and ISO 13459:2012 Level II for Trainer. - FOPS (Falling Objects Protective Structure) meets ISO 3449:1992 Level II criteria.
    ROPS Standards (2) - - ROPS (Rollover Protective Structure) meets ISO 3471:1994 criteria.

    Dimensions (Approximate)
    Height - Top of ROPS 22.05 ft - -
    Overall Length 51.44 ft - -
    Wheel Base 21.9 ft - -
    Rear Axle - Tail 16.07 ft - -
    Dump Clearance - Empty 5.72 ft - -
    Loading Height - Empty 23.85 ft - -
    Overall Height - Body Raised 48.85 ft - -
    Centerline Front Tire Width 23.06 ft - -
    Front Axle Clearance - Loaded 2.81 ft - -
    Overall Canopy Width (with rock deflectors) 33.15 ft - -
    Outside Body/Canopy Width (without rock deflectors) 31.62 ft - -
    Inside Body Width 29.44 ft - -
    Front Canopy Height - Empty 26.01 ft - -
    Rear Axle Clearance - Loaded 2.8 ft - -
    Centerline of Rear Dual Tire Width 19.5 ft - -
    Overall Tire Width - Empty 30.27 ft - -
    Note Dimensions listed includes canopy deflectors - -

    Weights
    LRC Bare Chassis Weight without Hoist - 58414 lb -
    LRC Bare Chassis Weight with Hoist - 59223 lb -
    LRC Gross Vehicle Weight (Target) with Hoist - 180999 lb -
    LRC Gross Vehicle Weight (Target) without Hoist - 180999 lb -
    HRC Bare Chassis Weight without Hoist - 59567 lb -
    HRC Bare Chassis Weight with Hoist - 60376 lb -
    HRC Gross Vehicle Weight (Target) with Hoist - 180999 lb -
    HRC Gross Vehicle Weight (Target) without Hoist - 180999 lb -
    Note - LRC model is offered for lesser regulated countries. HRC model is offered for highly regulated countries. U.S. EPA Tier 4 Final / EU Stage V available for applicable markets. -

    ROPS
    Tractor ROPS - 77430 lb -
    ROPS Standards - - ROPS (Rollover Protective Structure) for cab offered by Caterpillar meets ISO 3471:1994 ROPS criteria.
    FOPS Standards - - FOPS (Falling Objects Protective Structure) meets ISO 3449:1992 Level II FOPS criteria.

    Operating Specifications
    Nominal Water Tank Capacity - 11000 gal (US) -

    Transmission
    Forward - 1 - 8 mile/h 8 mile/h
    Forward - 2 - 10.9 mile/h 10.8 mile/h
    Forward - 3 - 14.8 mile/h 14.8 mile/h
    Forward - 4 - 19.8 mile/h 19.9 mile/h
    Forward - 5 - 26.9 mile/h 27.1 mile/h
    Forward - 6 - 36.2 mile/h 37.3 mile/h
    Forward - 7 - 49.2 mile/h -
    Reverse - 10.4 mile/h 7.3 mile/h
    Note - Maximum travel speeds with standard 21.00R33 (E4) tires. -
    Top Speed - Loaded - - 37.3 mile/h

    Brakes
    Brake Surface - Front - 216 in² 13921 in²
    Brake Surface - Rear - 7794 in² 20847 in²
    Standards - - J-ISO 3450 JAN88, ISO 3450:1996

    Capacity - HP Body - 100% Fill Factor
    Struck - - 112.6-151 m³ (147-197.5 yd³)
    Heaped (SAE 2:1)* - - 162-191 m³ (212-250 yd³)
    Note (1) - - Contact your local Cat dealer for body recommendation.
    Note (2) - - *ISO 6483:1980

    Final Drives
    Differential Ratio - - 1.8:1
    Planetary Ratio - - 16:01
    Total Reduction Ratio - - 26.8:1

    Capacity - MSD II - 100% Fill Factor
    Struck - - 112-142 m³ (146-186 yd³)
    Heaped (SAE 2:1) - - 159-190 m3 (209-250 yd3)
    Note - - Contact your local Cat dealer for body recommendation.
    Add a Similar Product:
    • 775G Off-Highway Truck Add
    • 775 Off-Highway Truck Add
    • 772 (07) Off-Highway Truck Add
    • 798 AC Electric Drive Mining Truck Add
    • 770 Off-Highway Truck Add
    • 797F Mining Truck Add
    • 794 AC Mining Truck Add
    • 789 Next Generation Add
    • 785 Mining Truck (LRC, Tier 4 Final / EU Stage V) Add