CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    796 AC Electric Drive Mining Truck
    View Product
    772G Off-Highway Truck
    View Product Remove
    785 Mining Truck (LRC, Tier 4 Final / EU Stage V)
    View Product Remove

    Weights - Approximate
    Nominal Rated Payload 360 ton (US) - -
    Rated Gross Machine Weight 1270000 lb - -
    Chassis Weight 448415 lb - -
    Body Weight Range 38 833 – 42 907 kg (85,611 – 94,594 lb) - -
    Note (1) Consult your tire manufacturer for maximum tire load. - Consult your tire manufacturer for maximum tire load
    Note (2) Chassis weight with full fuel and fluids, standard & mandatory attachments, hoist, body mounting group, rims, and tires. - Chassis weight with full fuel and fluids, standard & mandatory attachments, hoist, body mounting group, rims, and tires.
    Note (3) Refer to Cat Mining Truck 10/10/20 Overload Policy (AEXQ0250) for maximum gross machine weight limitations - Body weight varies depending on body selection and configuration.
    Nominal Rated Payload (33.00R51 Tires) - - 153 ton (US)
    Rated Gross Machine Weight (33.00R51 tires) - - 550000 lb
    Nominal Rated Payload (36.00R51 Tires) - - 157 ton (US)
    Rated Gross Machine Weight (36.00R51 tires) - - 564000 lb
    Chassis Weight (33.00R51 Tires) - - 186799 lb
    Chassis Weight (36.00R51 Tires) - - 193192 lb
    Body Weight - - 57779 lb

    Engine
    Gross Power - SAE J1995 3500 HP 605 HP 1600 HP
    Engine Model Cat® C175-16 Cat® C18 Cat� 3512E
    Net Power - SAE J1349 3405 HP - 1509 HP
    Rated Speed 1800 r/min - -
    Emissions Rating Fuel Optimized - Fuel Optimized
    Bore 6.9 in 5.7 in 6.7 in
    Stroke 8.7 in 7.2 in 8.5 in
    Displacement 5187 in³ 1105 in³ 3573 in³
    Note (1) Net Power advertised is the power available at the flywheel when the engine is equipped with air intake system, exhaust system, and alternator. - Net Power advertised is the power available at the flywheel when the engine is equipped with air intake system, exhaust system, and alternator.
    Note (2) U.S. EPA Tier 4 Final / EU Stage V available for applicable markets. - U.S. EPA Tier 4 Final / EU Stage V available for applicable markets.
    Note (3) Additional fuel optimized selectable power ratings: 2312 kW / 3,100 hp - Additional fuel optimized selectable power ratings: 1,450 hp
    Rated Engine Speed - 1700 r/min -
    Rated Net Power - SAE J1349 - 550 HP -
    Number of Cylinders - 6 -
    Note - Net Power advertised is the power available at the flywheel when the engine is equipped with air intake system, exhaust system, and alternator. -

    Steering
    Steer Angle 39 ° 31 ° 36 °
    Turning Diameter - Front 106.3 ft - -
    Steering Standards Steering Standards: ISO 5010:2007 ISO 5010:2007 ISO 5010:2007
    Note Turning Diameter (ISO 7457:1997) - -
    Turning Diameter - 57.7 ft -
    Turning Circle - Clearance Diameter - 66.6 ft -
    Turning Diameter - ISO 7457:1997 (33.00R51 tires) - - 97.75 ft

    Service Refill Capacities
    Fuel Tank 1300 gal (US) - 410 gal (US)
    Fuel Tank (Tier 4) 1200 gal (US) - -
    Diesel Exhaust Fluid Tank 100 gal (US) - 36 gal (US)
    Cooling System 211 gal (US) 33 gal (US) 100 gal (US)
    Crankcase 82 gal (US) 17 gal (US) 54 gal (US)
    Front Wheels - Each 7 gal (US) - 8 gal (US)
    Final Drive - Each 67 gal (US) - -
    Hydraulic Tank 296 gal (US) - -
    Hydraulic System - Including Tank 385 gal (US) - -
    Grease Tank 90 lb - -
    Note (1) DEF Tank only available for U.S. EPA Tier 4 Final / EU Stage V engine option - -
    Fuel Tank Capacity - 140 gal (US) -
    Brake/Hoist Hydraulic Tank - 38 gal (US) -
    Brake Hoist System - 60 gal (US) -
    Differential - Final Drives - 47 gal (US) 139 gal (US)
    Steering System - Including Tank - 60 gal (US) -
    Torque Converter - Transmission System - 17 gal (US) -
    Steering Tank - - 29 gal (US)
    Steering System - Includes Tank - - 45 gal (US)
    Brake/Hoist Tank - - 135 gal (US)
    Brake Hoist System - Includes Tank - - 160 gal (US)
    Torque Converter - Transmission System - Including Sump - - 46 gal (US)

    AC Drive System
    Total Reduction Ratio 35:01:00 - -
    Top Speed - Loaded 40 mile/h - -
    Generator/Alternator Cat brushless, engine mounted, dual bearing - -
    Controls Cat IGBT Inverter Technology, air cooled, pressurized cabinet with filtration - -
    Wheel Motor Cat AC induction, rear axle mounted - -
    Cooling System Cat variable speed, hydraulically driven cooling system - -

    Braking System
    Service Brakes Four-Corner, Wet Disc, Oil Cooled, Hydraulically Actuated - Four-Corner, Wet Disc, Oil Cooled, Hydraulically Actuated
    Front Wet Disc Brake Surface Area 20378 in² - 9487 in²
    Rear - Wet Disc Brake Surface Area 30750 in² - 13908 in²
    Standards Service and Secondary: ISO 3450:2011 - Service and Secondary: ISO 3450:2011
    Parking Brake Four-corner, Multi-disc, Spring Applied, Hydraulically Released - Four corner, multi disc, spring applied, hydraulically released
    Load Brake Rear service brakes - -
    Dynamic Retarding Power - Continuous 5480 HP - -
    Note Anti-Lock Brake System (ABS) optional with CMD package - -

    Weight Distributions - Approximate
    Front Axle - Empty 47 % - 48%
    Rear Axle - Empty 53 % - 52%
    Front Axle - Loaded 33 % - 33%
    Rear Axle - Loaded 67 % - 67%
    Note Weight distributions optimized with Cat body. - Weight distributions optimized with Cat body.

    Tires
    Standard Tires 59/80 R63 - -
    Rims 44" x 63" - 610 mm (24") Rims (standard). 660 mm (26") Rims (optional).
    Note (1) Quick Change Rims optional. - Quick Change Rims optional.
    Note (2) Caterpillar recommends the customer evaluate all job conditions and consult tire manufacturer for proper tire selection and TKPH (TMPH) capabilities. - Caterpillar recommends the customer evaluate all job conditions and consult tire manufacturer for proper tire selection and TKPH (TMPH) capabilities.
    Standard Tire - - 33.00R51
    Optional Tire - - 36.00R51

    Capacity - HE Body - 100% fill factor
    Struck 97-153 m³ (127-200 yd³) - -
    Heaped (SAE 2:1) 186-237 m³ (243-310 yd³) - -
    Note Consult your local Cat dealer for body recommendations. - -

    Body Hoists
    Type Twin, two-stage hydraulic cylinders with snubbing valve. - Twin, two-stage hydraulic cylinders with snubbing valve.
    Pump Flow - High Idle 257.3 gal/min - 192.7 gal/min
    Relief Valve Setting - Raise 3029 psi - 2500 psi
    Body Raise Time - High Idle 21 s - 15.2 s
    Body Lower Time - Float 22 s - -
    Body Power Down- High Idle 17.5 s - 15.9 s
    Note (1) Twin, two-stage hydraulic cylinders mounted outside main frame; double-acting cylinders in both stages. - -
    Note (2) Power raise in both stages; power down capability in both stages. - -
    Note (3) Automatic body-lower modulation reduces impact on frame. - -
    Body Lower Time - Float High Idle - - 15.9 s
    Body Lower Time - Float Low Idle - - 16.2 s

    Sound
    Sound Standards The operator sound pressure level, 75 dB(A), measured according to ISO 6394:2008 and ISO 6396:2008. - -

    Suspension
    Type Self-contained nitrogen/oil cylinders, pin-to-pin mounting, top & bottom double shear clevis attachments - Self-contained nitrogen/oil cylinders, pin-to-pin mounting, top & bottom double shear clevis attachments
    Effective Cylinder Stroke - Front 4 in - 12.6 in
    Effective Cylinder Stroke - Rear 2 in - 6.5 in
    Rear axle - Oscillation +/- 5.32 degrees - +/- 5 degrees

    Cab
    Air Conditioning HFC - 134A refrigerant: 21,600 Btu/h - HFC - 134A refrigerant: 24,500 Btu/h
    Heater / Defroster 24600 Btu/h - 33300 Btu/h
    Note Ambient capabilities down to -15C (5F) for heater/defroster and up to 50C (122F) for air conditioning. - The operator sound pressure level, 77 dB(A) with direct drive and 75 dB9A) with optional clutch, tested to ISO 6396:2008.
    ROPS Standards (1) ROPS (Rollover Protective Structure) meets ISO 3471:2008 for Operator and ISO 13459:2012 for Trainer. - ROPS (Rollover Protective Structure) meets ISO 3471:2008 for Operator and ISO 13459:2012 for Trainer.
    FOPS Standards FOPS (Falling Objects Protective Structure) meets ISO 3449:2005 Level II for Operator and ISO 13459:2012 Level II for Trainer. - FOPS (Falling Objects Protective Structure) meets ISO 3449:2005 Level II for Operator and ISO 13459:2012 Level II for Trainer.

    Dimensions (Approximate)
    Height - Top of ROPS 22.05 ft - -
    Overall Length 51.44 ft - -
    Wheel Base 21.9 ft - -
    Rear Axle - Tail 16.07 ft - -
    Dump Clearance - Empty 5.72 ft - -
    Loading Height - Empty 23.85 ft - -
    Overall Height - Body Raised 48.85 ft - -
    Centerline Front Tire Width 23.06 ft - -
    Front Axle Clearance - Loaded 2.81 ft - -
    Overall Canopy Width (with rock deflectors) 33.15 ft - -
    Outside Body/Canopy Width (without rock deflectors) 31.62 ft - -
    Inside Body Width 29.44 ft - -
    Front Canopy Height - Empty 26.01 ft - -
    Rear Axle Clearance - Loaded 2.8 ft - -
    Centerline of Rear Dual Tire Width 19.5 ft - -
    Overall Tire Width - Empty 30.27 ft - -
    Note Dimensions listed includes canopy deflectors - -

    Weights
    LRC Bare Chassis Weight without Hoist - 58414 lb -
    LRC Bare Chassis Weight with Hoist - 59223 lb -
    LRC Gross Vehicle Weight (Target) with Hoist - 180999 lb -
    LRC Gross Vehicle Weight (Target) without Hoist - 180999 lb -
    HRC Bare Chassis Weight without Hoist - 59567 lb -
    HRC Bare Chassis Weight with Hoist - 60376 lb -
    HRC Gross Vehicle Weight (Target) with Hoist - 180999 lb -
    HRC Gross Vehicle Weight (Target) without Hoist - 180999 lb -
    Note - LRC model is offered for lesser regulated countries. HRC model is offered for highly regulated countries. U.S. EPA Tier 4 Final / EU Stage V available for applicable markets. -

    ROPS
    Tractor ROPS - 77430 lb -

    Operating Specifications
    Nominal Water Tank Capacity - 11000 gal (US) -

    Transmission
    Forward - 1 - 8 mile/h 7.5 mile/h
    Forward - 2 - 10.9 mile/h 10.2 mile/h
    Forward - 3 - 14.8 mile/h 13.8 mile/h
    Forward - 4 - 19.8 mile/h 18.6 mile/h
    Forward - 5 - 26.9 mile/h 25.2 mile/h
    Forward - 6 - 36.2 mile/h 34 mile/h
    Forward - 7 - 49.2 mile/h -
    Reverse - 10.4 mile/h 6.8 mile/h
    Note - Maximum travel speeds with standard 21.00R33 (E4) tires. Maximum travel speeds with standard 33.00-R51 tires.
    Top Speed - Loaded - - 34 mile/h

    Brakes
    Brake Surface - Front - 216 in² -
    Brake Surface - Rear - 7794 in² -

    Final Drives
    Type - - Double reduction, planetary with full floating axles.
    Differential Ratio - - 2:10:01
    Planetary Ratio - - 10.83:1
    Total Reduction Ratio - - 22.75:1

    Capacity - MSD II - 100% Fill Factor
    Struck - - 72 m^3 / 94 yd^3
    Heaped (SAE 2:1) - - 99 m^3 / 129 yd^3
    Note - - Consult your local Cat dealer for body recommendations.

    Dimensions (All dimensions are approximate. MSD II Body, 33R51 tires, unloaded machine.)
    Height - Top of ROPS - - 17.09 ft
    Overall Body Length - - 39.32 ft
    Inside Body Length - - 27.29 ft
    Overall Length - - 39.23 ft
    Wheel Base - - 17 ft
    Rear Axle - Tail - - 12.56 ft
    Ground Clearance - - 3.29 ft
    Dump Clearance - - 3.7 ft
    Loading Height - Empty - - 17.39 ft
    Inside Body Depth - Maximum - - 9.15 ft
    Overall Height - Body Raised - - 39.48 ft
    Operating Width - - 24.72 ft
    Centerline Front Tire Width - - 15.91 ft
    Engine Guard Clearance - - 3.41 ft
    Overall Canopy Width - - 24.81 ft
    Outside Body Width - - 22 ft
    Inside Body Width - - 19.72 ft
    Front Canopy Height - - 19.8 ft
    Rear Axle - Clearance - - 3.25 ft
    Centerline of Rear Dual Tire Width - - 14.06 ft
    Overall Tire Width - - 20.59 ft
    Add a Similar Product:
    • 775G Off-Highway Truck Add
    • 775 Off-Highway Truck Add
    • 772 (07) Off-Highway Truck Add
    • 798 AC Electric Drive Mining Truck Add
    • 770 Off-Highway Truck Add
    • 797F Mining Truck Add
    • 789 Next Generation Add
    • 793F Mining Truck Add
    • 794 AC Mining Truck Add