Compare Equipment Go Back
796 AC Electric Drive Mining Truck |
793F Mining Truck |
797F Mining Truck |
|
Weights - Approximate |
|||
---|---|---|---|
Nominal Rated Payload | 360 ton (US) | 256 ton (US) | 400 ton (US) |
Rated Gross Machine Weight | 1270000 lb | 851000 lb | 1375000 lb |
Chassis Weight | 448415 lb | 265639 lb | 474472 lb |
Body Weight Range | 38 833 – 42 907 kg (85,611 – 94,594 lb) | - | - |
Note (1) | Consult your tire manufacturer for maximum tire load. | Consult your tire manufacturer for maximum tire load | Consult your tire manufacturer for maximum tire load |
Note (2) | Chassis weight with full fuel and fluids, standard & mandatory attachments, hoist, body mounting group, rims, and tires. | Chassis weight with full fuel and fluids, standard & mandatory attachments, hoist, body mounting group, rims, and tires. | Chassis weight with full fuel and fluids, standard & mandatory attachments, hoist, body mounting group, rims, and tires. |
Note (3) | Refer to Cat Mining Truck 10/10/20 Overload Policy (AEXQ0250) for maximum gross machine weight limitations | Refer to the Cat Mining Truck 10/10/20 Overload Policy for maximum gross machine weight limitations. | - |
Body Weight | - | 67682 lb | 94799 lb |
Note (4) | - | - | Tier 4 Chassis Weight: 486263 lb (220565 kg) |
Engine |
|||
Gross Power - SAE J1995 | 3500 HP | 2650 HP | 4000 HP |
Engine Model | Cat® C175-16 | Cat® C175-16 | Cat® C175-20 |
Net Power - SAE J1349 | 3405 HP | 2478 HP | 3795 HP |
Rated Speed | 1800 r/min | 1750 r/min | 1750 r/min |
Emissions Rating | Fuel Optimized | - | - |
Bore | 6.9 in | 6.9 in | 6.9 in |
Stroke | 8.7 in | 8.7 in | 8.7 in |
Displacement | 5187 in³ | 5187 in³ | 6469 in³ |
Note (1) | Net Power advertised is the power available at the flywheel when the engine is equipped with air intake system, exhaust system, and alternator. | Net Power advertised is the power available at the flywheel when the engine is equipped with air intake system, exhaust system, and alternator. | Net Power advertised is the power available at the flywheel when the engine is equipped with air intake system, exhaust system, and alternator. |
Note (2) | U.S. EPA Tier 4 Final / EU Stage V available for applicable markets. | EPA Tier 4 Final / EU Stage V available for applicable markets. | U.S. EPA Tier 4 Final available for applicable markets. |
Note (3) | Additional fuel optimized selectable power ratings: 2312 kW / 3,100 hp | - | High Altitude Low Maintenance Ratio Engine Configuration (4x4) option available. |
Emissions | - | Fuel Optimized | U.S. EPA Compliant. Where applicable, the Cat C175-20 engine is compliant with U.S. EPA emission standards.Tier 4 engine option available to meet Tier 4 Final emission standards. |
Steering |
|||
Steer Angle | 39 ° | 36 ° | - |
Turning Diameter - Front | 106.3 ft | 93.2 ft | 122.7 ft |
Steering Standards | Steering Standards: ISO 5010:2007 | SAE J15111 OCT90, ISO 5010:1992 | ISO 5010:2007 |
Note | Turning Diameter (ISO 7457:1997) | - | Turning Diameter (ISO 7457:2009) |
Steering Angle | - | - | 40 ° |
Service Refill Capacities |
|||
Fuel Tank | 1300 gal (US) | 750 gal (US) | 1000 gal (US) |
Fuel Tank (Tier 4) | 1200 gal (US) | - | 1200 gal (US) |
Diesel Exhaust Fluid Tank | 100 gal (US) | 62 gal (US) | 100 gal (US) |
Cooling System | 211 gal (US) | 284 gal (US) | 306 gal (US) |
Crankcase | 82 gal (US) | 82 gal (US) | 103 gal (US) |
Front Wheels - Each | 7 gal (US) | - | 16 gal (US) |
Final Drive - Each | 67 gal (US) | - | - |
Hydraulic Tank | 296 gal (US) | - | - |
Hydraulic System - Including Tank | 385 gal (US) | - | - |
Grease Tank | 90 lb | - | - |
Note (1) | DEF Tank only available for U.S. EPA Tier 4 Final / EU Stage V engine option | DEF Tank only available for EPA Tier 4 engine option. | DEF Tank only available for EPA Tier 4 engine option. |
Fuel Tank - Optional | - | 1300 gal (US) | - |
Rear Axle - Housing | - | 260 gal (US) | - |
Steering System - Including Tank | - | 77 gal (US) | 95 gal (US) |
Brake Hoist System - Includes Tank | - | 347 gal (US) | 489 gal (US) |
Torque Converter - Transmission Sump | - | 27 gal (US) | - |
Torque Converter/Transmission System - Including Sump | - | 55 gal (US) | 166 gal (US) |
Differentials | - | - | 330 gal (US) |
Steering Tank | - | - | 67 gal (US) |
Brake/Hoist Tank | - | - | 203 gal (US) |
Torque Converter Sump | - | - | 80 gal (US) |
AC Drive System |
|||
Total Reduction Ratio | 35:01:00 | - | - |
Top Speed - Loaded | 40 mile/h | - | - |
Generator/Alternator | Cat brushless, engine mounted, dual bearing | - | - |
Controls | Cat IGBT Inverter Technology, air cooled, pressurized cabinet with filtration | - | - |
Wheel Motor | Cat AC induction, rear axle mounted | - | - |
Cooling System | Cat variable speed, hydraulically driven cooling system | - | - |
Braking System |
|||
Service Brakes | Four-Corner, Wet Disc, Oil Cooled, Hydraulically Actuated | Four-Corner, Wet Disc, Oil Cooled, Hydraulically Actuated | Service Brakes: Four-Corner, Wet Disc, Oil Cooled, Hydraulically Actuated |
Front Wet Disc Brake Surface Area | 20378 in² | 13921 in³ | 20500 in² |
Rear - Wet Disc Brake Surface Area | 30750 in² | 20847 in³ | 30750 in² |
Standards | Service and Secondary: ISO 3450:2011 | (Service and Secondary): ISO 3450:1996 | Service and Secondary: ISO 3450:2011 |
Parking Brake | Four-corner, Multi-disc, Spring Applied, Hydraulically Released | - | Four-corner, Multi-disc, Spring Applied, Hydraulically Released |
Load Brake | Rear service brakes | Rear service brakes | Rear service brakes |
Dynamic Retarding Power - Continuous | 5480 HP | - | - |
Note | Anti-Lock Brake System (ABS) optional with CMD package | Anti-Lock Brake System (ABS) optional with CMD package | Anti-Lock Brake System (ABS) optional with CMD package |
Parking Brakes | - | Four-corner, Multi-disc, Spring Applied, Hydraulically Released | - |
Weight Distributions - Approximate |
|||
Front Axle - Empty | 47 % | 48 % | 47.20% |
Rear Axle - Empty | 53 % | 52 % | 52.80% |
Front Axle - Loaded | 33 % | 33 % | 33.30% |
Rear Axle - Loaded | 67 % | 67 % | 66.70% |
Note | Weight distributions optimized with Cat body. | - | Weight distributions optimized with Cat body. |
Tires |
|||
Standard Tires | 59/80 R63 | 40.00 R57 | - |
Rims | 44" x 63" | 29" or 32" | 44" x 63" |
Note (1) | Quick Change Rims optional. | Extended life wheel stations optional. | Caterpillar recommends the customer evaluate all job conditions and consult tire manufacturer for proper tire selection and TKPH (TMPH) capabilities. |
Note (2) | Caterpillar recommends the customer evaluate all job conditions and consult tire manufacturer for proper tire selection and TKPH (TMPH) capabilities. | Caterpillar recommends the customer evaluate all job conditions and consult tire manufacturer for proper tire selection and TKPH (TMPH) capabilities. | - |
Note | - | Quick Change Rims optional. | Quick Change Rims optional. |
Tires | - | - | 59/80 R63 |
Capacity - HE Body - 100% fill factor |
|||
Struck | 97-153 m³ (127-200 yd³) | - | - |
Heaped (SAE 2:1) | 186-237 m³ (243-310 yd³) | - | - |
Note | Consult your local Cat dealer for body recommendations. | - | - |
Body Hoists |
|||
Type | Twin, two-stage hydraulic cylinders with snubbing valve. | Twin, two-stage hydraulic cylinders with snubbing valve | Twin, two-stage hydraulic cylinders with snubbing valve. |
Pump Flow - High Idle | 257.3 gal/min | 224 gal/min | 317 gal/min |
Relief Valve Setting - Raise | 3029 psi | 2955 psi | 3510 psi |
Body Raise Time - High Idle | 21 s | 19 s | 25 s |
Body Lower Time - Float | 22 s | 20 s | 18 s |
Body Power Down- High Idle | 17.5 s | - | 18 s |
Note (1) | Twin, two-stage hydraulic cylinders mounted outside main frame; double-acting cylinders in both stages. | - | - |
Note (2) | Power raise in both stages; power down capability in both stages. | - | - |
Note (3) | Automatic body-lower modulation reduces impact on frame. | - | - |
Body Power Down - High Idle | - | 17.5 s | - |
Sound |
|||
Sound Standards | The operator sound pressure level, 75 dB(A), measured according to ISO 6394:2008 and ISO 6396:2008. | The operator sound pressure level measured according to work cycle procedures specified in ISO 6394 and 6396 is 76 dB(A) for cab offered by Caterpillar, when properly installed and maintained and tested with doors and windows closed. | - |
Sound Standards (1) | - | Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in a noisy environment. | - |
Suspension |
|||
Type | Self-contained nitrogen/oil cylinders, pin-to-pin mounting, top & bottom double shear clevis attachments | Self-contained nitrogen/oil cylinders, pin-to-pin mounting, top & bottom double shear clevis attachments | Self-contained nitrogen/oil cylinders, rear strut pin-to-pin mounting, top & bottom double shear clevis attachments |
Effective Cylinder Stroke - Front | 4 in | 5.1 in | 3.9 in |
Effective Cylinder Stroke - Rear | 2 in | 4.2 in | 3.7 in |
Rear axle - Oscillation | +/- 5.32 degrees | ±4.9 degrees | ±3.96 degrees |
Cab |
|||
Air Conditioning | HFC - 134A refrigerant: 21,600 Btu/h | Air Conditioning (HFC - 134A refrigerant): 24,300 Btu/hr | HFC - 134A refrigerant: 24,300 Btu/h |
Heater / Defroster | 24600 Btu/h | 38900 Btu/h | 38900 Btu/h |
Note | Ambient capabilities down to -15C (5F) for heater/defroster and up to 50C (122F) for air conditioning. | Ambient capabilities down to -30C (-22F) for heater/defroster and up to 50C (122F) for air conditioning. | Ambient capabilities down to -30C (-22F) for heater/defroster and up to 50C (122F) for air conditioning. |
ROPS Standards (1) | ROPS (Rollover Protective Structure) meets ISO 3471:2008 for Operator and ISO 13459:2012 for Trainer. | The operator sound pressure level, 76 dB(A), complies with ISO 6394 and ISO 6396. | The operator sound pressure level, 76 dB(A), complies with ISO 6394:2008 and ISO 6396:2008. |
FOPS Standards | FOPS (Falling Objects Protective Structure) meets ISO 3449:2005 Level II for Operator and ISO 13459:2012 Level II for Trainer. | FOPS (Falling Objects Protective Structure) meets ISO 3449:1992 Level II criteria. | FOPS (Falling Objects Protective Structure) meets ISO 3449:1992 Level II criteria. |
ROPS Standards (2) | - | ROPS (Rollover Protective Structure) meets ISO 3471:1994 criteria. | ROPS (Rollover Protective Structure) meets ISO 3471:1994 criteria. |
Dimensions (Approximate) |
|||
Height - Top of ROPS | 22.05 ft | - | - |
Overall Length | 51.44 ft | - | - |
Wheel Base | 21.9 ft | - | - |
Rear Axle - Tail | 16.07 ft | - | - |
Dump Clearance - Empty | 5.72 ft | - | - |
Loading Height - Empty | 23.85 ft | - | - |
Overall Height - Body Raised | 48.85 ft | - | - |
Centerline Front Tire Width | 23.06 ft | - | - |
Front Axle Clearance - Loaded | 2.81 ft | - | - |
Overall Canopy Width (with rock deflectors) | 33.15 ft | - | - |
Outside Body/Canopy Width (without rock deflectors) | 31.62 ft | - | - |
Inside Body Width | 29.44 ft | - | - |
Front Canopy Height - Empty | 26.01 ft | - | - |
Rear Axle Clearance - Loaded | 2.8 ft | - | - |
Centerline of Rear Dual Tire Width | 19.5 ft | - | - |
Overall Tire Width - Empty | 30.27 ft | - | - |
Note | Dimensions listed includes canopy deflectors | - | - |
Capacity - HP Body - 100% Fill Factor |
|||
Struck | - | 112.6-151 m³ (147-197.5 yd³) | 225 yd³ / 172 m³ |
Heaped (SAE 2:1)* | - | 162-191 m³ (212-250 yd³) | 330 yd³ / 252 m³ |
Note (1) | - | Contact your local Cat dealer for body recommendation. | Consult your local Cat dealer for body recommendations. |
Note (2) | - | *ISO 6483:1980 | - |
Transmission |
|||
Forward - 1 | - | 8 mile/h | 6.6 mile/h |
Forward - 2 | - | 10.8 mile/h | 8.9 mile/h |
Forward - 3 | - | 14.8 mile/h | 12 mile/h |
Forward - 4 | - | 19.9 mile/h | 16.2 mile/h |
Forward - 5 | - | 27.1 mile/h | 21.8 mile/h |
Forward - 6 | - | 37.3 mile/h | 29.4 mile/h |
Reverse | - | 7.3 mile/h | 7.4 mile/h |
Top Speed - Loaded | - | 37.3 mile/h | 39.5 mile/h |
Forward - 7 | - | - | 39.5 mile/h |
Final Drives |
|||
Differential Ratio | - | 1.8:1 | 1.276:1 |
Planetary Ratio | - | 16:01 | 16.67:1 |
Total Reduction Ratio | - | 26.8:1 | 21.26:1 |
Type | - | - | Double reduction, planetary with full floating axles. |
Note | - | - | Double reduction, planetary with full floating axles. |
Brakes |
|||
Brake Surface - Front | - | 13921 in² | - |
Brake Surface - Rear | - | 20847 in² | - |
Standards | - | J-ISO 3450 JAN88, ISO 3450:1996 | - |
Capacity - MSD II - 100% Fill Factor |
|||
Struck | - | 112-142 m³ (146-186 yd³) | - |
Heaped (SAE 2:1) | - | 159-190 m3 (209-250 yd3) | - |
Note | - | Contact your local Cat dealer for body recommendation. | - |
ROPS |
|||
ROPS Standards | - | ROPS (Rollover Protective Structure) for cab offered by Caterpillar meets ISO 3471:1994 ROPS criteria. | - |
FOPS Standards | - | FOPS (Falling Objects Protective Structure) meets ISO 3449:1992 Level II FOPS criteria. | - |
Dimensions |
|||
Rear Axle - Clearance - Loaded | - | - | 3.08 ft |
Inside Body Depth - Maximum | - | - | 11 ft |
Overall Height - Body Raised | - | - | 51.5 ft |
Loaded Ground Clearance | - | - | 2.58 ft |
Loading Height - Empty | - | - | 23 ft |
Engine Guard Clearance - Loaded | - | - | 3.33 ft |
Height - Top of ROPS - Empty | - | - | 21.4 ft |
Front Canopy Height - Empty | - | - | 25.33 ft |
Overall Body Length | - | - | 48.6 ft |
Inside Body Length | - | - | 32.75 ft |
Overall Length | - | - | 49.5 ft |
Wheel Base | - | - | 23.58 ft |
Rear Axle - Tail | - | - | 12.9 ft |
Dump Clearance | - | - | 6.58 ft |
Centerline Front Tire Width | - | - | 21.41 ft |
Overall Canopy Width | - | - | 29.91 ft |
Outside Body Width | - | - | 32 ft |
Inside Body Width | - | - | 27.91 ft |
Centerline of Rear Dual Tire Width | - | - | 20.41 ft |
Overall Tire Width | - | - | 31.25 ft |
Add a Similar Product: