CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    796 AC Electric Drive Mining Truck
    View Product
    785 Mining Truck (LRC, Tier 4 Final / EU Stage V)
    View Product Remove
    798 AC Electric Drive Mining Truck
    View Product Remove

    Weights - Approximate
    Nominal Rated Payload 360 ton (US) - 410 ton (US)
    Rated Gross Machine Weight 1270000 lb - 1375000 lb
    Chassis Weight 448415 lb - 453826 lb
    Body Weight Range 38 833 – 42 907 kg (85,611 – 94,594 lb) - 38 833 - 43 275 kg (85,611 - 95,406 lb)
    Note (1) Consult your tire manufacturer for maximum tire load. Consult your tire manufacturer for maximum tire load Consult your tire manufacturer for maximum tire load.
    Note (2) Chassis weight with full fuel and fluids, standard & mandatory attachments, hoist, body mounting group, rims, and tires. Chassis weight with full fuel and fluids, standard & mandatory attachments, hoist, body mounting group, rims, and tires. Chassis weight with 100% fuel, hoist, body mounting group, rims, and tires.
    Note (3) Refer to Cat Mining Truck 10/10/20 Overload Policy (AEXQ0250) for maximum gross machine weight limitations Body weight varies depending on body selection and configuration. Body weight varies depending on how body is equipped.
    Nominal Rated Payload (33.00R51 Tires) - 153 ton (US) -
    Rated Gross Machine Weight (33.00R51 tires) - 550000 lb -
    Nominal Rated Payload (36.00R51 Tires) - 157 ton (US) -
    Rated Gross Machine Weight (36.00R51 tires) - 564000 lb -
    Chassis Weight (33.00R51 Tires) - 186799 lb -
    Chassis Weight (36.00R51 Tires) - 193192 lb -
    Body Weight - 57779 lb -

    Engine
    Gross Power - SAE J1995 3500 HP 1600 HP 3500 HP
    Engine Model Cat® C175-16 Cat� 3512E Cat® C175-16
    Net Power - SAE J1349 3405 HP 1509 HP 3405 HP
    Rated Speed 1800 r/min - 1800 r/min
    Emissions Rating Fuel Optimized Fuel Optimized Fuel Optimized
    Bore 6.9 in 6.7 in 6.9 in
    Stroke 8.7 in 8.5 in 8.7 in
    Displacement 5187 in³ 3573 in³ 5187 in³
    Note (1) Net Power advertised is the power available at the flywheel when the engine is equipped with air intake system, exhaust system, and alternator. Net Power advertised is the power available at the flywheel when the engine is equipped with air intake system, exhaust system, and alternator. Net Power advertised is the power available at the flywheel when the engine is equipped with air intake system, exhaust system, and alternator.
    Note (2) U.S. EPA Tier 4 Final / EU Stage V available for applicable markets. U.S. EPA Tier 4 Final / EU Stage V available for applicable markets. U.S. EPA Tier 4 Final / EU Stage V available for applicable markets.
    Note (3) Additional fuel optimized selectable power ratings: 2312 kW / 3,100 hp Additional fuel optimized selectable power ratings: 1,450 hp Additional fuel optimized selectable power ratings: 2312 kW / 3,100 hp
    Optional Gross Power - SAE J1995 - - 3100 HP

    Steering
    Steer Angle 39 ° 36 ° 39 °
    Turning Diameter - Front 106.3 ft - 106.3 ft
    Steering Standards Steering Standards: ISO 5010:2007 ISO 5010:2007 Steering Standards: ISO 5010:2007
    Note Turning Diameter (ISO 7457:1997) - Turning Diameter (ISO 7457:1997)
    Turning Diameter - ISO 7457:1997 (33.00R51 tires) - 97.75 ft -

    Service Refill Capacities
    Fuel Tank 1300 gal (US) 410 gal (US) 1300 gal (US)
    Fuel Tank (Tier 4) 1200 gal (US) - 1200 gal (US)
    Diesel Exhaust Fluid Tank 100 gal (US) 36 gal (US) 100 gal (US)
    Cooling System 211 gal (US) 100 gal (US) 211 gal (US)
    Crankcase 82 gal (US) 54 gal (US) 82 gal (US)
    Front Wheels - Each 7 gal (US) 8 gal (US) -
    Final Drive - Each 67 gal (US) - 67 gal (US)
    Hydraulic Tank 296 gal (US) - 296 gal (US)
    Hydraulic System - Including Tank 385 gal (US) - 385 gal (US)
    Grease Tank 90 lb - 90 lb
    Note (1) DEF Tank only available for U.S. EPA Tier 4 Final / EU Stage V engine option - DEF Tank only available for U.S. EPA Tier 4 Final / EU Stage V engine option
    Differential - Final Drives - 139 gal (US) -
    Steering Tank - 29 gal (US) -
    Steering System - Includes Tank - 45 gal (US) -
    Brake/Hoist Tank - 135 gal (US) -
    Brake Hoist System - Includes Tank - 160 gal (US) -
    Torque Converter - Transmission System - Including Sump - 46 gal (US) -

    AC Drive System
    Total Reduction Ratio 35:01:00 - 35:01:00
    Top Speed - Loaded 40 mile/h - 40 mile/h
    Generator/Alternator Cat brushless, engine mounted, dual bearing - Brushless, engine mounted, dual bearing
    Controls Cat IGBT Inverter Technology, air cooled, pressurized cabinet with filtration - IGBT Inverter Technology, air cooled, pressurized cabinet with filtration
    Wheel Motor Cat AC induction, rear axle mounted - Cat high-torque AC induction, rear axle mounted
    Cooling System Cat variable speed, hydraulically driven cooling system - Cat variable speed, hydraulically driven cooling system

    Braking System
    Service Brakes Four-Corner, Wet Disc, Oil Cooled, Hydraulically Actuated Four-Corner, Wet Disc, Oil Cooled, Hydraulically Actuated Four-Corner, Wet Disc, Oil Cooled, Hydraulically Actuated
    Front Wet Disc Brake Surface Area 20378 in² 9487 in² 22642 in²
    Rear - Wet Disc Brake Surface Area 30750 in² 13908 in² 32730 in²
    Standards Service and Secondary: ISO 3450:2011 Service and Secondary: ISO 3450:2011 Service and Secondary: ISO 3450:2011
    Parking Brake Four-corner, Multi-disc, Spring Applied, Hydraulically Released Four corner, multi disc, spring applied, hydraulically released -
    Load Brake Rear service brakes - Rear service brakes
    Dynamic Retarding Power - Continuous 5480 HP - 5480 HP
    Note Anti-Lock Brake System (ABS) optional with CMD package - Anti-Lock Brake System (ABS) optional with CMD package
    Electric Retarding - - Radial Grid Design
    Parking Brakes - - Four-corner, Multi-disc, Spring Applied, Hydraulically Released

    Weight Distributions - Approximate
    Front Axle - Empty 47 % 48% 47 %
    Rear Axle - Empty 53 % 52% 53 %
    Front Axle - Loaded 33 % 33% 33 %
    Rear Axle - Loaded 67 % 67% 67 %
    Note Weight distributions optimized with Cat body. Weight distributions optimized with Cat body. Weight distributions optimized with Cat body.

    Tires
    Standard Tires 59/80 R63 - 59/80 R63
    Rims 44" x 63" 610 mm (24") Rims (standard). 660 mm (26") Rims (optional). 44" x 63" Rims
    Note (1) Quick Change Rims optional. Quick Change Rims optional. Quick Change Rims optional.
    Note (2) Caterpillar recommends the customer evaluate all job conditions and consult tire manufacturer for proper tire selection and TKPH (TMPH) capabilities. Caterpillar recommends the customer evaluate all job conditions and consult tire manufacturer for proper tire selection and TKPH (TMPH) capabilities. Caterpillar recommends the customer evaluate all job conditions and consult tire manufacturer for proper tire selection and TKPH (TMPH) capabilities.
    Standard Tire - 33.00R51 -
    Optional Tire - 36.00R51 -

    Capacity - HE Body - 100% fill factor
    Struck 97-153 m³ (127-200 yd³) - 129-200 m³ (168-261 yd³)
    Heaped (SAE 2:1) 186-237 m³ (243-310 yd³) - 218-276 m³ (285-361 yd³)
    Note Consult your local Cat dealer for body recommendations. - Contact your local Cat dealer for body recommendations.

    Body Hoists
    Type Twin, two-stage hydraulic cylinders with snubbing valve. Twin, two-stage hydraulic cylinders with snubbing valve. Twin, two-stage hydraulic cylinders with snubbing valve.
    Pump Flow - High Idle 257.3 gal/min 192.7 gal/min 257.3 gal/min
    Relief Valve Setting - Raise 3029 psi 2500 psi 3029 psi
    Body Raise Time - High Idle 21 s 15.2 s 21 s
    Body Lower Time - Float 22 s - 22 s
    Body Power Down- High Idle 17.5 s 15.9 s 17.5 s
    Note (1) Twin, two-stage hydraulic cylinders mounted outside main frame; double-acting cylinders in both stages. - Twin, two-stage hydraulic cylinders mounted outside main frame; double-acting cylinders in both stages.
    Note (2) Power raise in both stages; power down capability in both stages. - Power raise in both stages; power down capability in both stages.
    Note (3) Automatic body-lower modulation reduces impact on frame. - Automatic body-lower modulation reduces impact on frame.
    Body Lower Time - Float High Idle - 15.9 s -
    Body Lower Time - Float Low Idle - 16.2 s -

    Sound
    Sound Standards The operator sound pressure level, 75 dB(A), measured according to ISO 6394:2008 and ISO 6396:2008. - The operator sound pressure level, 75 dB(A), measured according to ISO 6394:2008 and ISO 6396:2008.

    Suspension
    Type Self-contained nitrogen/oil cylinders, pin-to-pin mounting, top & bottom double shear clevis attachments Self-contained nitrogen/oil cylinders, pin-to-pin mounting, top & bottom double shear clevis attachments Self-contained nitrogen/oil cylinders, pin-to-pin mounting, top & bottom double shear clevis attachments
    Effective Cylinder Stroke - Front 4 in 12.6 in 10 in
    Effective Cylinder Stroke - Rear 2 in 6.5 in 5 in
    Rear axle - Oscillation +/- 5.32 degrees +/- 5 degrees -

    Cab
    Air Conditioning HFC - 134A refrigerant: 21,600 Btu/h HFC - 134A refrigerant: 24,500 Btu/h HFC - 134A refrigerant: 21,600 Btu/h
    Heater / Defroster 24600 Btu/h 33300 Btu/h 24600 Btu/h
    Note Ambient capabilities down to -15C (5F) for heater/defroster and up to 50C (122F) for air conditioning. The operator sound pressure level, 77 dB(A) with direct drive and 75 dB9A) with optional clutch, tested to ISO 6396:2008. Ambient capabilities down to -15C (5F) for heater/defroster and up to 50C (122F) for air conditioning.
    ROPS Standards (1) ROPS (Rollover Protective Structure) meets ISO 3471:2008 for Operator and ISO 13459:2012 for Trainer. ROPS (Rollover Protective Structure) meets ISO 3471:2008 for Operator and ISO 13459:2012 for Trainer. ROPS (Rollover Protective Structure) meets ISO 3471:2008 for Operator and ISO 13459:2012 for Trainer.
    FOPS Standards FOPS (Falling Objects Protective Structure) meets ISO 3449:2005 Level II for Operator and ISO 13459:2012 Level II for Trainer. FOPS (Falling Objects Protective Structure) meets ISO 3449:2005 Level II for Operator and ISO 13459:2012 Level II for Trainer. FOPS (Falling Objects Protective Structure) meets ISO 3449:2005 Level II for Operator and ISO 13459:2012 Level II for Trainer.

    Dimensions (Approximate)
    Height - Top of ROPS 22.05 ft - 22.1 ft
    Overall Length 51.44 ft - 51.44 ft
    Wheel Base 21.9 ft - 21.9 ft
    Rear Axle - Tail 16.07 ft - 16.07 ft
    Dump Clearance - Empty 5.72 ft - 5.72 ft
    Loading Height - Empty 23.85 ft - 25.54 ft
    Overall Height - Body Raised 48.85 ft - 48.85 ft
    Centerline Front Tire Width 23.06 ft - 23.06 ft
    Front Axle Clearance - Loaded 2.81 ft - 2.81 ft
    Overall Canopy Width (with rock deflectors) 33.15 ft - 33.15 ft
    Outside Body/Canopy Width (without rock deflectors) 31.62 ft - 31.62 ft
    Inside Body Width 29.44 ft - 29.44 ft
    Front Canopy Height - Empty 26.01 ft - 26.01 ft
    Rear Axle Clearance - Loaded 2.8 ft - 2.8 ft
    Centerline of Rear Dual Tire Width 19.5 ft - 19.5 ft
    Overall Tire Width - Empty 30.27 ft - 30.27 ft
    Note Dimensions listed includes canopy deflectors - Dimensions listed includes canopy deflectors
    Overall Length (High Altitude only) - - 51.87 ft

    Final Drives
    Type - Double reduction, planetary with full floating axles. -
    Differential Ratio - 2:10:01 -
    Planetary Ratio - 10.83:1 -
    Total Reduction Ratio - 22.75:1 -

    Capacity - MSD II - 100% Fill Factor
    Struck - 72 m^3 / 94 yd^3 -
    Heaped (SAE 2:1) - 99 m^3 / 129 yd^3 -
    Note - Consult your local Cat dealer for body recommendations. -

    Dimensions (All dimensions are approximate. MSD II Body, 33R51 tires, unloaded machine.)
    Height - Top of ROPS - 17.09 ft -
    Overall Body Length - 39.32 ft -
    Inside Body Length - 27.29 ft -
    Overall Length - 39.23 ft -
    Wheel Base - 17 ft -
    Rear Axle - Tail - 12.56 ft -
    Ground Clearance - 3.29 ft -
    Dump Clearance - 3.7 ft -
    Loading Height - Empty - 17.39 ft -
    Inside Body Depth - Maximum - 9.15 ft -
    Overall Height - Body Raised - 39.48 ft -
    Operating Width - 24.72 ft -
    Centerline Front Tire Width - 15.91 ft -
    Engine Guard Clearance - 3.41 ft -
    Overall Canopy Width - 24.81 ft -
    Outside Body Width - 22 ft -
    Inside Body Width - 19.72 ft -
    Front Canopy Height - 19.8 ft -
    Rear Axle - Clearance - 3.25 ft -
    Centerline of Rear Dual Tire Width - 14.06 ft -
    Overall Tire Width - 20.59 ft -

    Transmission
    Forward - 1 - 7.5 mile/h -
    Forward - 2 - 10.2 mile/h -
    Forward - 3 - 13.8 mile/h -
    Forward - 4 - 18.6 mile/h -
    Forward - 5 - 25.2 mile/h -
    Forward - 6 - 34 mile/h -
    Reverse - 6.8 mile/h -
    Top Speed - Loaded - 34 mile/h -
    Note - Maximum travel speeds with standard 33.00-R51 tires. -

    Service Refill Capacities - High Altitude Only
    Fuel Tank - - 2000 gal (US)
    Cooling System - - 273 gal (US)
    Crankcase - - 124 gal (US)
    Hydraulic Tank - - 273 gal (US)
    Hydraulic System (includes tank) - - 342 gal (US)

    Engine - High Altitude Only
    Engine Model - - Cat® C175-20
    Gross Power SAE J1995:2014 - - 4150 HP
    Net Power - SAE J1349:2011 - - 4000 HP
    Rated Speed - - 1750 r/min
    Emissions Rating - - Fuel Optimized
    Bore - - 6.9 in
    Stroke - - 8.7 in
    Displacement - - 6469 in³
    Note 1 - - Net Power advertised is the power available at the flywheel when the engine is equipped with air intake system, exhaust system, and alternator.
    Note 2 - - Additional fuel optimized selectable power rating: 2983 kW / 4,000 hp
    Add a Similar Product:
    • 772G Off-Highway Truck Add
    • 775G Off-Highway Truck Add
    • 775 Off-Highway Truck Add
    • 772 (07) Off-Highway Truck Add
    • 770 Off-Highway Truck Add
    • 797F Mining Truck Add
    • 789 Next Generation Add
    • 793F Mining Truck Add
    • 794 AC Mining Truck Add