CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    796 AC Electric Drive Mining Truck
    View Product
    794 AC Mining Truck
    View Product Remove
    797F Mining Truck
    View Product Remove

    Weights - Approximate
    Nominal Rated Payload 360 ton (US) 327 ton (US) 400 ton (US)
    Rated Gross Machine Weight 1270000 lb 1150000 lb 1375000 lb
    Chassis Weight 448415 lb 426237 lb 474472 lb
    Body Weight Range 38 833 – 42 907 kg (85,611 – 94,594 lb) - -
    Note (1) Consult your tire manufacturer for maximum tire load. Consult your tire manufacturer for maximum tire load. Consult your tire manufacturer for maximum tire load
    Note (2) Chassis weight with full fuel and fluids, standard & mandatory attachments, hoist, body mounting group, rims, and tires. Chassis weight with full fuel and fluids, standard & mandatory attachments, hoist, body mounting group, rims, and tires Chassis weight with full fuel and fluids, standard & mandatory attachments, hoist, body mounting group, rims, and tires.
    Note (3) Refer to Cat Mining Truck 10/10/20 Overload Policy (AEXQ0250) for maximum gross machine weight limitations Refer to Cat Mining Truck 10/10/20 Overload Policy (AEXQ0250) for maximum gross machine weight limitations. -
    Body Weight - 64346 lb 94799 lb
    Note (4) - Tier 4 Final / Stage V chassis weight: 426312 lb (193372 kg) Tier 4 Chassis Weight: 486263 lb (220565 kg)

    Engine
    Gross Power - SAE J1995 3500 HP 3500 HP 4000 HP
    Engine Model Cat® C175-16 Cat® C175-16 Cat® C175-20
    Net Power - SAE J1349 3405 HP 3405 HP 3795 HP
    Rated Speed 1800 r/min 1800 r/min 1750 r/min
    Emissions Rating Fuel Optimized Fuel Optimized -
    Bore 6.9 in 6.9 in 6.9 in
    Stroke 8.7 in 8.7 in 8.7 in
    Displacement 5187 in³ 5187 in³ 6469 in³
    Note (1) Net Power advertised is the power available at the flywheel when the engine is equipped with air intake system, exhaust system, and alternator. Contact factory for high altitude configuration. Net Power advertised is the power available at the flywheel when the engine is equipped with air intake system, exhaust system, and alternator.
    Note (2) U.S. EPA Tier 4 Final / EU Stage V available for applicable markets. Tier 4 / EU Stage V option available for regions that require these emissions standards. U.S. EPA Tier 4 Final available for applicable markets.
    Note (3) Additional fuel optimized selectable power ratings: 2312 kW / 3,100 hp Tier 4 / EU Stage V engine option Net Power - SAE J1349: 3434 HP (2561 kW) High Altitude Low Maintenance Ratio Engine Configuration (4x4) option available.
    Standard Gross Power - SAE J1995 - 3500 HP -
    Optional Gross Power - SAE J1995 - 3100 HP -
    Optional Gross Power - SAE J1995 (Option 2) - 2750 HP -
    Emissions - - U.S. EPA Compliant. Where applicable, the Cat C175-20 engine is compliant with U.S. EPA emission standards.Tier 4 engine option available to meet Tier 4 Final emission standards.

    Steering
    Steer Angle 39 ° 39 ° -
    Turning Diameter - Front 106.3 ft - 122.7 ft
    Steering Standards Steering Standards: ISO 5010:2007 ISO 5010:2007 ISO 5010:2007
    Note Turning Diameter (ISO 7457:1997) Gross Machine Operating Weight is 521 631 kg (1,150,000 lb). Turning Diameter (ISO 7457:2009)
    Steering Angle - - 40 °

    Service Refill Capacities
    Fuel Tank 1300 gal (US) 1300 gal (US) 1000 gal (US)
    Fuel Tank (Tier 4) 1200 gal (US) - 1200 gal (US)
    Diesel Exhaust Fluid Tank 100 gal (US) 100 gal (US) 100 gal (US)
    Cooling System 211 gal (US) 211 gal (US) 306 gal (US)
    Crankcase 82 gal (US) 82 gal (US) 103 gal (US)
    Front Wheels - Each 7 gal (US) - 16 gal (US)
    Final Drive - Each 67 gal (US) 67 gal (US) -
    Hydraulic Tank 296 gal (US) 296 gal (US) -
    Hydraulic System - Including Tank 385 gal (US) 385 gal (US) -
    Grease Tank 90 lb - -
    Note (1) DEF Tank only available for U.S. EPA Tier 4 Final / EU Stage V engine option DEF Tank only available for EPA Tier 4 / EU Stage V engine option. DEF Tank only available for EPA Tier 4 engine option.
    Differentials - - 330 gal (US)
    Steering Tank - - 67 gal (US)
    Steering System - Including Tank - - 95 gal (US)
    Brake/Hoist Tank - - 203 gal (US)
    Brake Hoist System - Includes Tank - - 489 gal (US)
    Torque Converter Sump - - 80 gal (US)
    Torque Converter/Transmission System - Including Sump - - 166 gal (US)

    AC Drive System
    Total Reduction Ratio 35:01:00 35:01:00 -
    Top Speed - Loaded 40 mile/h 37 mile/h -
    Generator/Alternator Cat brushless, engine mounted, dual bearing Brushless, engine mounted, dual bearing -
    Controls Cat IGBT Inverter Technology, air cooled, pressurized cabinet with filtration IGBT Inverter Technology, air cooled, pressurized cabinet with filtration -
    Wheel Motor Cat AC induction, rear axle mounted High-torque AC induction, rear axle mounted -
    Cooling System Cat variable speed, hydraulically driven cooling system Variable speed, hydraulically driven cooling system -

    Braking System
    Service Brakes Four-Corner, Wet Disc, Oil Cooled, Hydraulically Actuated Four-Corner, Wet Disc, Oil Cooled, Hydraulically Actuated Service Brakes: Four-Corner, Wet Disc, Oil Cooled, Hydraulically Actuated
    Front Wet Disc Brake Surface Area 20378 in² 20378 in² 20500 in²
    Rear - Wet Disc Brake Surface Area 30750 in² 30750 in² 30750 in²
    Standards Service and Secondary: ISO 3450:2011 ISO 3450:2011 Service and Secondary: ISO 3450:2011
    Parking Brake Four-corner, Multi-disc, Spring Applied, Hydraulically Released Four-corner, Multi-disc, Spring applied, Hydraulically Released Four-corner, Multi-disc, Spring Applied, Hydraulically Released
    Load Brake Rear service brakes Rear service brakes Rear service brakes
    Dynamic Retarding Power - Continuous 5480 HP 5480 HP -
    Note Anti-Lock Brake System (ABS) optional with CMD package - Anti-Lock Brake System (ABS) optional with CMD package

    Weight Distributions - Approximate
    Front Axle - Empty 47 % 49 % 47.20%
    Rear Axle - Empty 53 % 51 % 52.80%
    Front Axle - Loaded 33 % 33 % 33.30%
    Rear Axle - Loaded 67 % 67 % 66.70%
    Note Weight distributions optimized with Cat body. - Weight distributions optimized with Cat body.

    Tires
    Standard Tires 59/80 R63 53/80 R63 -
    Rims 44" x 63" 36" x 63" 44" x 63"
    Note (1) Quick Change Rims optional. Quick Change Rims optional. Caterpillar recommends the customer evaluate all job conditions and consult tire manufacturer for proper tire selection and TKPH (TMPH) capabilities.
    Note (2) Caterpillar recommends the customer evaluate all job conditions and consult tire manufacturer for proper tire selection and TKPH (TMPH) capabilities. Caterpillar recommends the customer evaluate all job conditions and consult tire manufacturer for proper tire selection and TKPH (TMPH) capabilities. -
    Tires - - 59/80 R63
    Note - - Quick Change Rims optional.

    Capacity - HE Body - 100% fill factor
    Struck 97-153 m³ (127-200 yd³) 108-133 m³ (142-175 yd³) -
    Heaped (SAE 2:1) 186-237 m³ (243-310 yd³) 180-222 m³ (236-290 yd³) -
    Note Consult your local Cat dealer for body recommendations. Contact your local Cat dealer for body recommendations. -
    Dump Body Plate Thickness Varies Depending on Body Selection - Floor Plate - 0.63 in -
    Dump Body Plate Thickness Varies Depending on Body Selection - Front Plate - 0.35 in -
    Dump Body Plate Thickness Varies Depending on Body Selection - Side Plate - 0.31 in -
    Dump Body Plate Thickness Varies Depending on Body Selection - Canopy Plate - 0.2 in -

    Body Hoists
    Type Twin, two-stage hydraulic cylinders with snubbing valve. - Twin, two-stage hydraulic cylinders with snubbing valve.
    Pump Flow - High Idle 257.3 gal/min - 317 gal/min
    Relief Valve Setting - Raise 3029 psi 3029 psi 3510 psi
    Body Raise Time - High Idle 21 s 24 s 25 s
    Body Lower Time - Float 22 s - 18 s
    Body Power Down- High Idle 17.5 s - 18 s
    Note (1) Twin, two-stage hydraulic cylinders mounted outside main frame; double-acting cylinders in both stages. Twin, two-stage hydraulic cylinders mounted inside main frame; double-acting cylinders in both stages. -
    Note (2) Power raise in both stages; power down capability in both stages. Power raise in both stages; power down in both stages possible. -
    Note (3) Automatic body-lower modulation reduces impact on frame. Automatic body-lower modulation reduces impact on frame. -
    Pump Flow - High Idle (HAA at 1,800 rpm) - 221 gal/min -
    Pump Flow - High Idle (LAA at 1,960 rpm) - 240 gal/min -
    High Idle Body Lower Time - Float - 20 s -
    Total Cycle Time - 44 s -

    Sound
    Sound Standards The operator sound pressure level, 75 dB(A), measured according to ISO 6394:2008 and ISO 6396:2008. - -
    Sound Standards (1) - The operator sound pressure level measured according to work cycle procedures specified in ISO 6394 and 6396 is 75 dB(A) for cab offered by Caterpillar when properly installed, maintained, and tested with doors and windows closed. -
    Sound Standards (2) - Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in a noisy environment. -

    Suspension
    Type Self-contained nitrogen/oil cylinders, pin-to-pin mounting, top & bottom double shear clevis attachments - Self-contained nitrogen/oil cylinders, rear strut pin-to-pin mounting, top & bottom double shear clevis attachments
    Effective Cylinder Stroke - Front 4 in - 3.9 in
    Effective Cylinder Stroke - Rear 2 in - 3.7 in
    Rear axle - Oscillation +/- 5.32 degrees - ±3.96 degrees

    Cab
    Air Conditioning HFC - 134A refrigerant: 21,600 Btu/h - HFC - 134A refrigerant: 24,300 Btu/h
    Heater / Defroster 24600 Btu/h - 38900 Btu/h
    Note Ambient capabilities down to -15C (5F) for heater/defroster and up to 50C (122F) for air conditioning. - Ambient capabilities down to -30C (-22F) for heater/defroster and up to 50C (122F) for air conditioning.
    ROPS Standards (1) ROPS (Rollover Protective Structure) meets ISO 3471:2008 for Operator and ISO 13459:2012 for Trainer. Rollover Protective Structure (ROPS) meets ISO 3471:2008 criteria for operator and ISO 13459:2012 for trainer. The operator sound pressure level, 76 dB(A), complies with ISO 6394:2008 and ISO 6396:2008.
    FOPS Standards FOPS (Falling Objects Protective Structure) meets ISO 3449:2005 Level II for Operator and ISO 13459:2012 Level II for Trainer. Falling Object Protective Structure (FOPS) meets ISO 3449:2005 Level II for operator and ISO 13459:2012 Level II for trainer. FOPS (Falling Objects Protective Structure) meets ISO 3449:1992 Level II criteria.
    ROPS Standards (2) - - ROPS (Rollover Protective Structure) meets ISO 3471:1994 criteria.

    Dimensions (Approximate)
    Height - Top of ROPS 22.05 ft 22.25 ft -
    Overall Length 51.44 ft 50.75 ft -
    Wheel Base 21.9 ft 21.83 ft -
    Rear Axle - Tail 16.07 ft 15.5 ft -
    Dump Clearance - Empty 5.72 ft - -
    Loading Height - Empty 23.85 ft 22.92 ft -
    Overall Height - Body Raised 48.85 ft 48.42 ft -
    Centerline Front Tire Width 23.06 ft 23 ft -
    Front Axle Clearance - Loaded 2.81 ft - -
    Overall Canopy Width (with rock deflectors) 33.15 ft - -
    Outside Body/Canopy Width (without rock deflectors) 31.62 ft - -
    Inside Body Width 29.44 ft 28.08 ft -
    Front Canopy Height - Empty 26.01 ft - -
    Rear Axle Clearance - Loaded 2.8 ft - -
    Centerline of Rear Dual Tire Width 19.5 ft 18.75 ft -
    Overall Tire Width - Empty 30.27 ft - -
    Note Dimensions listed includes canopy deflectors - -
    Ground Clearance - 2.67 ft -
    Dump Clearance - 3 ft -
    Front Axle Clearance - 3.17 ft -
    Canopy Width (without optional rock deflectors) - 29.75 ft -
    Outside Body Width - 29.75 ft -
    Front Canopy Height - 26.33 ft -
    Rear Axle - Clearance - 3.08 ft -
    Overall Tire Width - 28.67 ft -
    Overall Canopy Width - 31.5 ft -

    Final Drives
    Total Reduction Ratio - 35:01:00 21.26:1
    Type - - Double reduction, planetary with full floating axles.
    Differential Ratio - - 1.276:1
    Planetary Ratio - - 16.67:1
    Note - - Double reduction, planetary with full floating axles.

    Capacity - HP Body - 100% Fill Factor
    Struck - - 225 yd³ / 172 m³
    Heaped (SAE 2:1)* - - 330 yd³ / 252 m³
    Note (1) - - Consult your local Cat dealer for body recommendations.

    Transmission
    Forward - 1 - - 6.6 mile/h
    Forward - 2 - - 8.9 mile/h
    Forward - 3 - - 12 mile/h
    Forward - 4 - - 16.2 mile/h
    Forward - 5 - - 21.8 mile/h
    Forward - 6 - - 29.4 mile/h
    Forward - 7 - - 39.5 mile/h
    Reverse - - 7.4 mile/h
    Top Speed - Loaded - - 39.5 mile/h

    Dimensions
    Rear Axle - Clearance - Loaded - - 3.08 ft
    Inside Body Depth - Maximum - - 11 ft
    Overall Height - Body Raised - - 51.5 ft
    Loaded Ground Clearance - - 2.58 ft
    Loading Height - Empty - - 23 ft
    Engine Guard Clearance - Loaded - - 3.33 ft
    Height - Top of ROPS - Empty - - 21.4 ft
    Front Canopy Height - Empty - - 25.33 ft
    Overall Body Length - - 48.6 ft
    Inside Body Length - - 32.75 ft
    Overall Length - - 49.5 ft
    Wheel Base - - 23.58 ft
    Rear Axle - Tail - - 12.9 ft
    Dump Clearance - - 6.58 ft
    Centerline Front Tire Width - - 21.41 ft
    Overall Canopy Width - - 29.91 ft
    Outside Body Width - - 32 ft
    Inside Body Width - - 27.91 ft
    Centerline of Rear Dual Tire Width - - 20.41 ft
    Overall Tire Width - - 31.25 ft
    Add a Similar Product:
    • 772G Off-Highway Truck Add
    • 775G Off-Highway Truck Add
    • 775 Off-Highway Truck Add
    • 772 (07) Off-Highway Truck Add
    • 798 AC Electric Drive Mining Truck Add
    • 770 Off-Highway Truck Add
    • 793F Mining Truck Add
    • 789 Next Generation Add
    • 785 Mining Truck (LRC, Tier 4 Final / EU Stage V) Add