CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    793F Mining Truck
    View Product
    775 Off-Highway Truck
    View Product Remove
    796 AC Electric Drive Mining Truck
    View Product Remove

    Weights - Approximate
    Nominal Rated Payload 256 ton (US) - 360 ton (US)
    Rated Gross Machine Weight 851000 lb - 1270000 lb
    Chassis Weight 265639 lb - 448415 lb
    Body Weight 67682 lb - -
    Note (1) Consult your tire manufacturer for maximum tire load - Consult your tire manufacturer for maximum tire load.
    Note (2) Chassis weight with full fuel and fluids, standard & mandatory attachments, hoist, body mounting group, rims, and tires. - Chassis weight with full fuel and fluids, standard & mandatory attachments, hoist, body mounting group, rims, and tires.
    Note (3) Refer to the Cat Mining Truck 10/10/20 Overload Policy for maximum gross machine weight limitations. - Refer to Cat Mining Truck 10/10/20 Overload Policy (AEXQ0250) for maximum gross machine weight limitations
    Maximum Gross Vehicle Weight - 246503 lb -
    Body Weight Range - - 38 833 – 42 907 kg (85,611 – 94,594 lb)

    Engine
    Gross Power - SAE J1995 2650 HP 825 HP 3500 HP
    Net Power - SAE J1349 2478 HP 768 HP 3405 HP
    Engine Model Cat® C175-16 Cat® C27 Cat® C175-16
    Rated Speed 1750 r/min - 1800 r/min
    Emissions Fuel Optimized Meets EU Stage V emission standards. -
    Bore 6.9 in 5.4 in 6.9 in
    Stroke 8.7 in 6 in 8.7 in
    Displacement 5187 in³ 1648 in³ 5187 in³
    Note (1) Net Power advertised is the power available at the flywheel when the engine is equipped with air intake system, exhaust system, and alternator. Power rating applies at 2,000 rpm when tested under the specified condition for the specified standard. Net Power advertised is the power available at the flywheel when the engine is equipped with air intake system, exhaust system, and alternator.
    Note (2) EPA Tier 4 Final / EU Stage V available for applicable markets. Ratings based on SAE J1995 standard air conditions of 25° C (77° F) and 100 kPa (29.61 Hg) barometer. Power based on fuel having API gravity of 35 at 16° C (60° F) and an LHV of 42 780 kJ/kg (18,390 BTU/lb) when engine used at 30° C (86° F). U.S. EPA Tier 4 Final / EU Stage V available for applicable markets.
    Rated Engine Speed - 1800 r/min -
    Net Power - 80/1269/EEC - 775 HP -
    Net Power - ISO 9249 - 775 HP -
    Engine Power - ISO 14396 - 812 HP -
    Net Torque - 3148 ft-lb -
    Peak Torque - Speed - 1200 r/min -
    Note (3) - No engine derating required up to 3810 m (12,500 ft) for Tier 2 Equivalent. Additional fuel optimized selectable power ratings: 2312 kW / 3,100 hp
    Emissions Rating - - Fuel Optimized

    Tires
    Standard Tires 40.00 R57 - 59/80 R63
    Rims 29" or 32" - 44" x 63"
    Note Quick Change Rims optional. - -
    Note (1) Extended life wheel stations optional. Productive capabilities of the 775G truck are such that, under certain job conditions, TKPH (TMPH) capabilities of standard or optional tires could be exceeded and, therefore, limit production. Quick Change Rims optional.
    Note (2) Caterpillar recommends the customer evaluate all job conditions and consult tire manufacturer for proper tire selection and TKPH (TMPH) capabilities. Caterpillar recommends the customer evaluate all job conditions and consult the tire manufacturer for proper tire selection. Caterpillar recommends the customer evaluate all job conditions and consult tire manufacturer for proper tire selection and TKPH (TMPH) capabilities.
    Standard Tire - 24.00R35 (E4) -

    Suspension
    Type Self-contained nitrogen/oil cylinders, pin-to-pin mounting, top & bottom double shear clevis attachments - Self-contained nitrogen/oil cylinders, pin-to-pin mounting, top & bottom double shear clevis attachments
    Effective Cylinder Stroke - Front 5.1 in - 4 in
    Effective Cylinder Stroke - Rear 4.2 in - 2 in
    Rear axle - Oscillation ±4.9 degrees 8.1° +/- 5.32 degrees
    Empty Loaded Cylinder Stroke Front - 9.2 in -
    Empty Loaded Cylinder Stroke Rear - 5.8 in -

    Braking System
    Service Brakes Four-Corner, Wet Disc, Oil Cooled, Hydraulically Actuated - Four-Corner, Wet Disc, Oil Cooled, Hydraulically Actuated
    Front Wet Disc Brake Surface Area 13921 in³ - 20378 in²
    Rear - Wet Disc Brake Surface Area 20847 in³ - 30750 in²
    Standards (Service and Secondary): ISO 3450:1996 - Service and Secondary: ISO 3450:2011
    Parking Brakes Four-corner, Multi-disc, Spring Applied, Hydraulically Released - -
    Load Brake Rear service brakes - Rear service brakes
    Note Anti-Lock Brake System (ABS) optional with CMD package - Anti-Lock Brake System (ABS) optional with CMD package
    Parking Brake - - Four-corner, Multi-disc, Spring Applied, Hydraulically Released
    Dynamic Retarding Power - Continuous - - 5480 HP

    Body Hoists
    Type Twin, two-stage hydraulic cylinders with snubbing valve - Twin, two-stage hydraulic cylinders with snubbing valve.
    Pump Flow - High Idle 224 gal/min 118 gal/min 257.3 gal/min
    Relief Valve Setting - Raise 2955 psi 2502 psi 3029 psi
    Body Raise Time - High Idle 19 s 10 s 21 s
    Body Lower Time - Float 20 s 14 s 22 s
    Body Power Down - High Idle 17.5 s 14 s -
    Relief Valve Setting - Lower - 500 psi -
    Body Power Down- High Idle - - 17.5 s
    Note (1) - - Twin, two-stage hydraulic cylinders mounted outside main frame; double-acting cylinders in both stages.
    Note (2) - - Power raise in both stages; power down capability in both stages.
    Note (3) - - Automatic body-lower modulation reduces impact on frame.

    Cab
    Air Conditioning Air Conditioning (HFC - 134A refrigerant): 24,300 Btu/hr - HFC - 134A refrigerant: 21,600 Btu/h
    Heater / Defroster 38900 Btu/h - 24600 Btu/h
    Note Ambient capabilities down to -30C (-22F) for heater/defroster and up to 50C (122F) for air conditioning. - Ambient capabilities down to -15C (5F) for heater/defroster and up to 50C (122F) for air conditioning.
    ROPS Standards (1) The operator sound pressure level, 76 dB(A), complies with ISO 6394 and ISO 6396. - ROPS (Rollover Protective Structure) meets ISO 3471:2008 for Operator and ISO 13459:2012 for Trainer.
    ROPS Standards (2) ROPS (Rollover Protective Structure) meets ISO 3471:1994 criteria. - -
    FOPS Standards FOPS (Falling Objects Protective Structure) meets ISO 3449:1992 Level II criteria. - FOPS (Falling Objects Protective Structure) meets ISO 3449:2005 Level II for Operator and ISO 13459:2012 Level II for Trainer.

    Service Refill Capacities
    Fuel Tank 750 gal (US) 210 gal (US) 1300 gal (US)
    Fuel Tank - Optional 1300 gal (US) - -
    Diesel Exhaust Fluid Tank 62 gal (US) - 100 gal (US)
    Cooling System 284 gal (US) 45 gal (US) 211 gal (US)
    Crankcase 82 gal (US) 24 gal (US) 82 gal (US)
    Rear Axle - Housing 260 gal (US) - -
    Steering System - Including Tank 77 gal (US) 14 gal (US) -
    Brake Hoist System - Includes Tank 347 gal (US) - -
    Torque Converter - Transmission Sump 27 gal (US) - -
    Torque Converter/Transmission System - Including Sump 55 gal (US) - -
    Note (1) DEF Tank only available for EPA Tier 4 engine option. - DEF Tank only available for U.S. EPA Tier 4 Final / EU Stage V engine option
    Differential - Final Drives - 38 gal (US) -
    Steering Tank - 9.5 gal (US) -
    Brake Hoist System - 85 gal (US) -
    Torque Converter - Transmission System - LRC - 16 gal (US) -
    Brake/Hoist Hydraulic Tank - 46.5 gal (US) -
    Torque Converter - Transmission System - HRC - 18 gal (US) -
    Fuel Tank (Tier 4) - - 1200 gal (US)
    Front Wheels - Each - - 7 gal (US)
    Final Drive - Each - - 67 gal (US)
    Hydraulic Tank - - 296 gal (US)
    Hydraulic System - Including Tank - - 385 gal (US)
    Grease Tank - - 90 lb

    Capacity - HP Body - 100% Fill Factor
    Struck 112.6-151 m³ (147-197.5 yd³) - -
    Heaped (SAE 2:1)* 162-191 m³ (212-250 yd³) - -
    Note (1) Contact your local Cat dealer for body recommendation. - -
    Note (2) *ISO 6483:1980 - -

    Weight Distributions - Approximate
    Front Axle - Empty 48 % 50 % 47 %
    Rear Axle - Empty 52 % 50 % 53 %
    Front Axle - Loaded 33 % 34 % 33 %
    Rear Axle - Loaded 67 % 66 % 67 %
    Note - - Weight distributions optimized with Cat body.

    Transmission
    Forward - 1 8 mile/h 6.6 mile/h -
    Forward - 2 10.8 mile/h 9.3 mile/h -
    Forward - 3 14.8 mile/h 12.6 mile/h -
    Forward - 4 19.9 mile/h 16.8 mile/h -
    Forward - 5 27.1 mile/h 22.8 mile/h -
    Forward - 6 37.3 mile/h 30.7 mile/h -
    Reverse 7.3 mile/h 8.7 mile/h -
    Top Speed - Loaded 37.3 mile/h - -
    Forward - 7 - 41.6 mile/h -
    Note - Maximum travel speeds with standard 24.00R35 (E4) tires. -

    Final Drives
    Differential Ratio 1.8:1 3.64:1 -
    Planetary Ratio 16:01 4.80:1 -
    Total Reduction Ratio 26.8:1 17.49:1 -

    Brakes
    Brake Surface - Front 13921 in² 257 in² -
    Brake Surface - Rear 20847 in² 9497 in² -
    Standards J-ISO 3450 JAN88, ISO 3450:1996 - -
    Brake Standards - ISO 3450:2011 -

    Capacity - MSD II - 100% Fill Factor
    Struck 112-142 m³ (146-186 yd³) - -
    Heaped (SAE 2:1) 159-190 m3 (209-250 yd3) - -
    Note Contact your local Cat dealer for body recommendation. - -

    ROPS
    ROPS Standards ROPS (Rollover Protective Structure) for cab offered by Caterpillar meets ISO 3471:1994 ROPS criteria. Rollover Protective Structure (ROPS) for cab offered by Caterpillar meets ISO 3471:2008 ROPS criteria. -
    FOPS Standards FOPS (Falling Objects Protective Structure) meets ISO 3449:1992 Level II FOPS criteria. Falling Objects Protective Structure (FOPS) meets ISO 3449:2005 Level II FOPS criteria. -

    Sound
    Sound Standards The operator sound pressure level measured according to work cycle procedures specified in ISO 6394 and 6396 is 76 dB(A) for cab offered by Caterpillar, when properly installed and maintained and tested with doors and windows closed. - The operator sound pressure level, 75 dB(A), measured according to ISO 6394:2008 and ISO 6396:2008.
    Sound Standards (1) Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in a noisy environment. The operator Equivalent Sound Pressure Level (Leq) is 76 dB(A) when SAE J1166 FEB2008 is used to measure the value for an enclosed cab. This is a work cycle sound exposure level. The cab was properly installed and maintained. The test was conducted with t -
    Sound Standards (2) - The exterior sound pressure level for the standard machine measured at a distance of 15 m (49 ft) according to the test procedures specified in SAE J88:2008, mid‑gear moving operation is 86 dB(A). -
    Sound Standards (3) - Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in a noisy environment. -

    Steering
    Steer Angle 36 ° 31 ° 39 °
    Turning Diameter - Front 93.2 ft 77.1 ft 106.3 ft
    Steering Standards SAE J15111 OCT90, ISO 5010:1992 ISO 5010:2007 Steering Standards: ISO 5010:2007
    Turning Circle - Clearance Diameter - 85.6 ft -
    Note - - Turning Diameter (ISO 7457:1997)

    Operating Specifications
    Nominal Payload Class (100%) - 70.5 ton (US) -
    Top Speed - Loaded - 41.6 mile/h -
    Maximum Working Payload (110%) - 77.5 ton (US) -
    Target Payload (100%) - 70.5 ton (US) -
    Maximum Allowable Payload (120%)* - 84.6 ton (US) -
    Note (2) - * Refer to the Caterpillar 10/10/20 Payload Policy for maximum gross machine weight limitations. -
    Note (1) - Capacity with Dual Slope body – no liner. -
    Body Capacity - SAE 2:1 - 55.23 yd³ -

    Capacity - Dual Slope - 100% Fill Factor
    Struck - 42.7 yd³ -
    Heaped (SAE 2:1)* - 55.5 yd³ -
    Note (1) - Contact your local Cat dealer for body recommendation. -
    Note (2) - *ISO 6483:1980 -

    Capacity - Flat Floor - 100% Fill Factor
    Struck - 42.2 yd³ -
    Heaped (SAE 2:1)* - 55.2 yd³ -
    Note (1) - Contact your local Cat dealer for body recommendation. -
    Note (2) - *ISO 6483:1980 -

    Sustainability
    Recyclability - 98% -

    AC Drive System
    Total Reduction Ratio - - 35:01:00
    Top Speed - Loaded - - 40 mile/h
    Generator/Alternator - - Cat brushless, engine mounted, dual bearing
    Controls - - Cat IGBT Inverter Technology, air cooled, pressurized cabinet with filtration
    Wheel Motor - - Cat AC induction, rear axle mounted
    Cooling System - - Cat variable speed, hydraulically driven cooling system

    Capacity - HE Body - 100% fill factor
    Struck - - 97-153 m³ (127-200 yd³)
    Heaped (SAE 2:1) - - 186-237 m³ (243-310 yd³)
    Note - - Consult your local Cat dealer for body recommendations.

    Dimensions (Approximate)
    Height - Top of ROPS - - 22.05 ft
    Overall Length - - 51.44 ft
    Wheel Base - - 21.9 ft
    Rear Axle - Tail - - 16.07 ft
    Dump Clearance - Empty - - 5.72 ft
    Loading Height - Empty - - 23.85 ft
    Overall Height - Body Raised - - 48.85 ft
    Centerline Front Tire Width - - 23.06 ft
    Front Axle Clearance - Loaded - - 2.81 ft
    Overall Canopy Width (with rock deflectors) - - 33.15 ft
    Outside Body/Canopy Width (without rock deflectors) - - 31.62 ft
    Inside Body Width - - 29.44 ft
    Front Canopy Height - Empty - - 26.01 ft
    Rear Axle Clearance - Loaded - - 2.8 ft
    Centerline of Rear Dual Tire Width - - 19.5 ft
    Overall Tire Width - Empty - - 30.27 ft
    Note - - Dimensions listed includes canopy deflectors
    Add a Similar Product:
    • 772G Off-Highway Truck Add
    • 775G Off-Highway Truck Add
    • 772 (07) Off-Highway Truck Add
    • 798 AC Electric Drive Mining Truck Add
    • 770 Off-Highway Truck Add
    • 797F Mining Truck Add
    • 794 AC Mining Truck Add
    • 789 Next Generation Add
    • 785 Mining Truck (LRC, Tier 4 Final / EU Stage V) Add