Compare Equipment Go Back
797F Mining Truck |
770 Off-Highway Truck |
775 Off-Highway Truck |
|
Weights - Approximate |
|||
---|---|---|---|
Nominal Rated Payload | 400 ton (US) | - | - |
Rated Gross Machine Weight | 1375000 lb | - | - |
Chassis Weight | 474472 lb | 55948 lb | - |
Body Weight | 94799 lb | 17306 lb | - |
Note (1) | Consult your tire manufacturer for maximum tire load | Chassis weight with 100% fuel, hoist, body mounting group, rims, and tires. | - |
Note (2) | Chassis weight with full fuel and fluids, standard & mandatory attachments, hoist, body mounting group, rims, and tires. | Body weight is the standard Dual Slope body with no liner and will vary depending on configuration. | - |
Note (4) | Tier 4 Chassis Weight: 486263 lb (220565 kg) | - | - |
Target Gross Machine Operating Weight | - | 157000 lb | - |
Target Gross Machine Weight | - | 157000 lb | - |
Maximum Gross Vehicle Weight | - | - | 246503 lb |
Engine |
|||
Gross Power - SAE J1995 | 4000 HP | 515 HP | 825 HP |
Net Power - SAE J1349 | 3795 HP | 477 HP | 768 HP |
Engine Model | Cat® C175-20 | Cat® C15 | Cat® C27 |
Rated Speed | 1750 r/min | - | - |
Emissions | U.S. EPA Compliant. Where applicable, the Cat C175-20 engine is compliant with U.S. EPA emission standards.Tier 4 engine option available to meet Tier 4 Final emission standards. | Meets U.S. EPA Tier 4 and EU Stage V emission standards. | Meets EU Stage V emission standards. |
Bore | 6.9 in | 5.4 in | 5.4 in |
Stroke | 8.7 in | 6.7 in | 6 in |
Displacement | 6469 in³ | 927.6 in³ | 1648 in³ |
Note (1) | Net Power advertised is the power available at the flywheel when the engine is equipped with air intake system, exhaust system, and alternator. | Power rating applies at 1,700 rpm when tested under the specified condition for the specified standard. | Power rating applies at 2,000 rpm when tested under the specified condition for the specified standard. |
Note (2) | U.S. EPA Tier 4 Final available for applicable markets. | Ratings based on SAE J1995 standard air conditions of 25° C (77° F) and 100 kPa (29.61 Hg) barometer. Power based on fuel having API gravity of 35 at 16° C (60° F) and an LHV of 42 780 kJ/kg (18,390 BTU/lb) when engine used at 30° C (86° F). | Ratings based on SAE J1995 standard air conditions of 25° C (77° F) and 100 kPa (29.61 Hg) barometer. Power based on fuel having API gravity of 35 at 16° C (60° F) and an LHV of 42 780 kJ/kg (18,390 BTU/lb) when engine used at 30° C (86° F). |
Note (3) | High Altitude Low Maintenance Ratio Engine Configuration (4x4) option available. | No engine derating required up to 3000 m (9,843 ft) altitude. | No engine derating required up to 3810 m (12,500 ft) for Tier 2 Equivalent. |
Rated Engine Speed | - | 1700 r/min | 1800 r/min |
Net Power - ISO 9249 | - | 477 HP | 775 HP |
Net Power - 80/1269/EEC | - | 489 HP | 775 HP |
Net Power - ISO 14396 | - | 508 HP | - |
Net Torque - SAE J1349 | - | 1834 ft·lbf | - |
Number of Cylinders | - | 6 | - |
Note (4) | - | Meets Japan Small Volume Exemption. | - |
Engine Power - ISO 14396 | - | - | 812 HP |
Net Torque | - | - | 3148 ft-lb |
Peak Torque - Speed | - | - | 1200 r/min |
Body Hoists |
|||
Type | Twin, two-stage hydraulic cylinders with snubbing valve. | - | - |
Pump Flow - High Idle | 317 gal/min | 118 gal/min | 118 gal/min |
Relief Valve Setting - Raise | 3510 psi | 2750 psi | 2502 psi |
Body Raise Time - High Idle | 25 s | 7.5 s | 10 s |
Body Lower Time - Float | 18 s | 10 s | 14 s |
Body Power Down- High Idle | 18 s | - | - |
Relief Valve Setting - Lower | - | 500 psi | 500 psi |
Body Power Down - High Idle | - | 10 s | 14 s |
Suspension |
|||
Type | Self-contained nitrogen/oil cylinders, rear strut pin-to-pin mounting, top & bottom double shear clevis attachments | - | - |
Effective Cylinder Stroke - Front | 3.9 in | - | - |
Effective Cylinder Stroke - Rear | 3.7 in | - | - |
Rear axle - Oscillation | ±3.96 degrees | 8.9 ° | 8.1° |
Empty Loaded Cylinder Stroke Front | - | 9.2 in | 9.2 in |
Empty Loaded Cylinder Stroke Rear | - | 5.9 in | 5.8 in |
Service Refill Capacities |
|||
Fuel Tank | 1000 gal (US) | 140 gal (US) | 210 gal (US) |
Fuel Tank (Tier 4) | 1200 gal (US) | - | - |
Diesel Exhaust Fluid Tank | 100 gal (US) | - | - |
Cooling System | 306 gal (US) | 33 gal (US) | 45 gal (US) |
Crankcase | 103 gal (US) | 17 gal (US) | 24 gal (US) |
Front Wheels - Each | 16 gal (US) | - | - |
Differentials | 330 gal (US) | - | - |
Steering Tank | 67 gal (US) | 14.5 gal (US) | 9.5 gal (US) |
Steering System - Including Tank | 95 gal (US) | 23 gal (US) | 14 gal (US) |
Brake/Hoist Tank | 203 gal (US) | - | - |
Brake Hoist System - Includes Tank | 489 gal (US) | - | - |
Torque Converter Sump | 80 gal (US) | - | - |
Torque Converter/Transmission System - Including Sump | 166 gal (US) | - | - |
Note (1) | DEF Tank only available for EPA Tier 4 engine option. | - | - |
Differential - Final Drives | - | 47 gal (US) | 38 gal (US) |
Brake/Hoist Hydraulic Tank | - | 38 gal (US) | 46.5 gal (US) |
Brake Hoist System | - | 60 gal (US) | 85 gal (US) |
Torque Converter - Transmission System | - | 17 gal (US) | - |
DEF Tank | - | 6 gal (US) | - |
Torque Converter - Transmission System - LRC | - | - | 16 gal (US) |
Torque Converter - Transmission System - HRC | - | - | 18 gal (US) |
Weight Distributions - Approximate |
|||
Front Axle - Empty | 47.20% | 49 % | 50 % |
Rear Axle - Empty | 52.80% | 51 % | 50 % |
Front Axle - Loaded | 33.30% | 34 % | 34 % |
Rear Axle - Loaded | 66.70% | 66 % | 66 % |
Note | Weight distributions optimized with Cat body. | - | - |
Final Drives |
|||
Type | Double reduction, planetary with full floating axles. | - | - |
Differential Ratio | 1.276:1 | 1.92:1 | 3.64:1 |
Planetary Ratio | 16.67:1 | 4.80:1 | 4.80:1 |
Total Reduction Ratio | 21.26:1 | 9.26:1 | 17.49:1 |
Note | Double reduction, planetary with full floating axles. | - | - |
Tires |
|||
Tires | 59/80 R63 | - | - |
Rims | 44" x 63" | - | - |
Note | Quick Change Rims optional. | - | - |
Note (1) | Caterpillar recommends the customer evaluate all job conditions and consult tire manufacturer for proper tire selection and TKPH (TMPH) capabilities. | Productive capabilities of the 770G truck are such that, under certain job conditions, TKPH (TMPH) capabilities of standard or optional tires could be exceeded and, therefore, limit production. | Productive capabilities of the 775G truck are such that, under certain job conditions, TKPH (TMPH) capabilities of standard or optional tires could be exceeded and, therefore, limit production. |
Standard Tire | - | 18.00R33 (E4) | 24.00R35 (E4) |
Note (2) | - | Caterpillar recommends the customer evaluates all job conditions and consults the tire manufacturer for proper tire selection. | Caterpillar recommends the customer evaluate all job conditions and consult the tire manufacturer for proper tire selection. |
Braking System |
|||
Service Brakes | Service Brakes: Four-Corner, Wet Disc, Oil Cooled, Hydraulically Actuated | - | - |
Front Wet Disc Brake Surface Area | 20500 in² | - | - |
Rear - Wet Disc Brake Surface Area | 30750 in² | - | - |
Standards | Service and Secondary: ISO 3450:2011 | - | - |
Parking Brake | Four-corner, Multi-disc, Spring Applied, Hydraulically Released | - | - |
Load Brake | Rear service brakes | - | - |
Note | Anti-Lock Brake System (ABS) optional with CMD package | - | - |
Capacity - HP Body - 100% Fill Factor |
|||
Struck | 225 yd³ / 172 m³ | - | - |
Heaped (SAE 2:1)* | 330 yd³ / 252 m³ | - | - |
Note (1) | Consult your local Cat dealer for body recommendations. | - | - |
Cab |
|||
Air Conditioning | HFC - 134A refrigerant: 24,300 Btu/h | - | - |
Heater / Defroster | 38900 Btu/h | - | - |
Note | Ambient capabilities down to -30C (-22F) for heater/defroster and up to 50C (122F) for air conditioning. | - | - |
ROPS Standards (1) | The operator sound pressure level, 76 dB(A), complies with ISO 6394:2008 and ISO 6396:2008. | - | - |
ROPS Standards (2) | ROPS (Rollover Protective Structure) meets ISO 3471:1994 criteria. | - | - |
FOPS Standards | FOPS (Falling Objects Protective Structure) meets ISO 3449:1992 Level II criteria. | - | - |
Steering |
|||
Steering Angle | 40 ° | - | - |
Turning Diameter - Front | 122.7 ft | 57.7 ft | 77.1 ft |
Steering Standards | ISO 5010:2007 | ISO 5010:2007 | ISO 5010:2007 |
Note | Turning Diameter (ISO 7457:2009) | Target gross machine operating weight is 71 214 kg (157,000 lb). | - |
Steer Angle | - | 40.5 ° | 31 ° |
Turning Circle - Clearance Diameter | - | 66.6 ft | 85.6 ft |
Transmission |
|||
Forward - 1 | 6.6 mile/h | 7.4 mile/h | 6.6 mile/h |
Forward - 2 | 8.9 mile/h | 10.1 mile/h | 9.3 mile/h |
Forward - 3 | 12 mile/h | 13.8 mile/h | 12.6 mile/h |
Forward - 4 | 16.2 mile/h | 18.5 mile/h | 16.8 mile/h |
Forward - 5 | 21.8 mile/h | 25.1 mile/h | 22.8 mile/h |
Forward - 6 | 29.4 mile/h | 33.8 mile/h | 30.7 mile/h |
Forward - 7 | 39.5 mile/h | 45.8 mile/h | 41.6 mile/h |
Reverse | 7.4 mile/h | 8.8 mile/h | 8.7 mile/h |
Top Speed - Loaded | 39.5 mile/h | - | - |
Note | - | Maximum travel speeds with standard 18.00R33 (E4) tires. | Maximum travel speeds with standard 24.00R35 (E4) tires. |
Dimensions |
|||
Rear Axle - Clearance - Loaded | 3.08 ft | - | - |
Inside Body Depth - Maximum | 11 ft | 4.6 ft | - |
Overall Height - Body Raised | 51.5 ft | 27.1 ft | - |
Loaded Ground Clearance | 2.58 ft | - | - |
Loading Height - Empty | 23 ft | 10.3 ft | - |
Engine Guard Clearance - Loaded | 3.33 ft | - | - |
Height - Top of ROPS - Empty | 21.4 ft | - | - |
Front Canopy Height - Empty | 25.33 ft | - | - |
Overall Body Length | 48.6 ft | 26.8 ft | - |
Inside Body Length | 32.75 ft | 18.5 ft | - |
Overall Length | 49.5 ft | 28.9 ft | - |
Wheel Base | 23.58 ft | 13 ft | - |
Rear Axle - Tail | 12.9 ft | 8.5 ft | - |
Dump Clearance | 6.58 ft | 1.7 ft | - |
Centerline Front Tire Width | 21.41 ft | 10.2 ft | - |
Overall Canopy Width | 29.91 ft | - | - |
Outside Body Width | 32 ft | 12.9 ft | - |
Inside Body Width | 27.91 ft | 11.9 ft | - |
Centerline of Rear Dual Tire Width | 20.41 ft | 8.3 ft | - |
Overall Tire Width | 31.25 ft | 12.1 ft | - |
Height - Top of ROPS | - | 12.7 ft | - |
Ground Clearance | - | 1.6 ft | - |
Operating Width | - | 15.7 ft | - |
Engine Guard Clearance | - | 1.8 ft | - |
Front Canopy Height | - | 13.5 ft | - |
Rear Axle - Clearance | - | 1.8 ft | - |
Operating Specifications |
|||
Nominal Payload Class (100%) | - | 42.1 ton (US) | 70.5 ton (US) |
Top Speed - Loaded | - | 45.8 mile/h | 41.6 mile/h |
Target Payload (100%) | - | 42.1 ton (US) | 70.5 ton (US) |
Maximum Working Payload (110%) | - | 46.3 ton (US) | 77.5 ton (US) |
Maximum Allowable Payload (120%)* | - | 50.5 ton (US) | 84.6 ton (US) |
Body Capacity - SAE 2:1 | - | 32.9 yd³ | 55.23 yd³ |
Note (1) | - | *Refer to Caterpillar 10/10/20 Payload Policy for maximum gross machine weight limitations. | Capacity with Dual Slope body – no liner. |
Note (2) | - | Target payload and capacity based on Dual Slope body with no liner. Attachment selection will affect payload and maximum gross machine operating weight. | * Refer to the Caterpillar 10/10/20 Payload Policy for maximum gross machine weight limitations. |
Brakes |
|||
Brake Surface - Front | - | 216 in² | 257 in² |
Brake Surface - Rear | - | 6235 in² | 9497 in² |
Brake Standards | - | ISO 3450:2011 | ISO 3450:2011 |
Note | - | Target gross machine operating weight is 71 214 kg (157,000 lb). | - |
Capacity - Dual Slope - 100% Fill Factor |
|||
Struck | - | 23.01 yd³ | 42.7 yd³ |
Heaped (SAE 2:1)* | - | 32.9 yd³ | 55.5 yd³ |
Note (2) | - | *ISO 6483:1980. | *ISO 6483:1980 |
Note (1) | - | Contact your local Cat dealer for body recommendation. | Contact your local Cat dealer for body recommendation. |
Capacity - Flat Floor - 100% Fill Factor |
|||
Struck | - | 23.01 yd³ | 42.2 yd³ |
Heaped (SAE 2:1)* | - | 32.9 yd³ | 55.2 yd³ |
Note (1) | - | Contact your local Cat dealer for body recommendation. | Contact your local Cat dealer for body recommendation. |
Note (2) | - | *ISO 6483:1980. | *ISO 6483:1980 |
ROPS |
|||
ROPS Standards | - | Rollover Protective Structure (ROPS) for cab offered by Caterpillar meets ISO 3471:2008 ROPS criteria. | Rollover Protective Structure (ROPS) for cab offered by Caterpillar meets ISO 3471:2008 ROPS criteria. |
FOPS Standards | - | Falling Objects Protective Structure (FOPS) meets ISO 3449:2005 Level II FOPS criteria. | Falling Objects Protective Structure (FOPS) meets ISO 3449:2005 Level II FOPS criteria. |
Sound |
|||
Sound Standards (1) | - | Hearing protection may be needed when operating with open operator station & cab for extended periods or in noisy environment. | The operator Equivalent Sound Pressure Level (Leq) is 76 dB(A) when SAE J1166 FEB2008 is used to measure the value for an enclosed cab. This is a work cycle sound exposure level. The cab was properly installed and maintained. The test was conducted with t |
Sound Standards (2) | - | Exterior sound pressure power level for standard machine measured according to tests specified in ISO 6395:2008 is 116 dB(A). | The exterior sound pressure level for the standard machine measured at a distance of 15 m (49 ft) according to the test procedures specified in SAE J88:2008, mid‑gear moving operation is 86 dB(A). |
Sound Standards (3) | - | Operator Equivalent Sound Pressure Level is 79 dB(A) & 74 dB(A) with EU sound suppression applied when ISO 6396:2008 is used. | Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in a noisy environment. |
Sustainability |
|||
Recyclability | - | - | 98% |
Add a Similar Product: