Compare Equipment Go Back
 797F Mining Truck |
 775 Off-Highway Truck |
|
|
Weights - Approximate |
|||
|---|---|---|---|
| Nominal Rated Payload | 400 ton (US) | - | - |
| Rated Gross Machine Weight | 1375000 lb | - | - |
| Chassis Weight | 474472 lb | - | - |
| Body Weight | 94799 lb | - | - |
| Note (1) | Consult your tire manufacturer for maximum tire load | - | - |
| Note (2) | Chassis weight with full fuel and fluids, standard & mandatory attachments, hoist, body mounting group, rims, and tires. | - | - |
| Note (4) | Tier 4 Chassis Weight: 486263 lb (220565 kg) | - | - |
| Maximum Gross Vehicle Weight | - | 246503 lb | - |
Engine |
|||
| Gross Power - SAE J1995 | 4000 HP | 825 HP | - |
| Engine Model | Cat® C175-20 | Cat® C27 | - |
| Net Power - SAE J1349 | 3795 HP | 768 HP | - |
| Rated Speed | 1750 r/min | - | - |
| Emissions | U.S. EPA Compliant. Where applicable, the Cat C175-20 engine is compliant with U.S. EPA emission standards.Tier 4 engine option available to meet Tier 4 Final emission standards. | Meets EU Stage V emission standards. | - |
| Bore | 6.9 in | 5.4 in | - |
| Stroke | 8.7 in | 6 in | - |
| Displacement | 6469 in³ | 1648 in³ | - |
| Note (1) | Net Power advertised is the power available at the flywheel when the engine is equipped with air intake system, exhaust system, and alternator. | Power rating applies at 2,000 rpm when tested under the specified condition for the specified standard. | - |
| Note (2) | U.S. EPA Tier 4 Final available for applicable markets. | Ratings based on SAE J1995 standard air conditions of 25° C (77° F) and 100 kPa (29.61 Hg) barometer. Power based on fuel having API gravity of 35 at 16° C (60° F) and an LHV of 42 780 kJ/kg (18,390 BTU/lb) when engine used at 30° C (86° F). | - |
| Note (3) | High Altitude Low Maintenance Ratio Engine Configuration (4x4) option available. | No engine derating required up to 3810 m (12,500 ft) for Tier 2 Equivalent. | - |
| Rated Engine Speed | - | 1800 r/min | - |
| Net Power - 80/1269/EEC | - | 775 HP | - |
| Net Power - ISO 9249 | - | 775 HP | - |
| Engine Power - ISO 14396 | - | 812 HP | - |
| Net Torque | - | 3148 ft-lb | - |
| Peak Torque - Speed | - | 1200 r/min | - |
Body Hoists |
|||
| Type | Twin, two-stage hydraulic cylinders with snubbing valve. | - | - |
| Pump Flow - High Idle | 317 gal/min | 118 gal/min | - |
| Relief Valve Setting - Raise | 3510 psi | 2502 psi | - |
| Body Raise Time - High Idle | 25 s | 10 s | - |
| Body Lower Time - Float | 18 s | 14 s | - |
| Body Power Down- High Idle | 18 s | - | - |
| Relief Valve Setting - Lower | - | 500 psi | - |
| Body Power Down - High Idle | - | 14 s | - |
Suspension |
|||
| Type | Self-contained nitrogen/oil cylinders, rear strut pin-to-pin mounting, top & bottom double shear clevis attachments | - | - |
| Effective Cylinder Stroke - Front | 3.9 in | - | - |
| Effective Cylinder Stroke - Rear | 3.7 in | - | - |
| Rear axle - Oscillation | ±3.96 degrees | 8.1° | - |
| Empty Loaded Cylinder Stroke Front | - | 9.2 in | - |
| Empty Loaded Cylinder Stroke Rear | - | 5.8 in | - |
Service Refill Capacities |
|||
| Fuel Tank | 1000 gal (US) | 210 gal (US) | - |
| Fuel Tank (Tier 4) | 1200 gal (US) | - | - |
| Diesel Exhaust Fluid Tank | 100 gal (US) | - | - |
| Cooling System | 306 gal (US) | 45 gal (US) | - |
| Crankcase | 103 gal (US) | 24 gal (US) | - |
| Front Wheels - Each | 16 gal (US) | - | - |
| Differentials | 330 gal (US) | - | - |
| Steering Tank | 67 gal (US) | 9.5 gal (US) | - |
| Steering System - Including Tank | 95 gal (US) | 14 gal (US) | - |
| Brake/Hoist Tank | 203 gal (US) | - | - |
| Brake Hoist System - Includes Tank | 489 gal (US) | - | - |
| Torque Converter Sump | 80 gal (US) | - | - |
| Torque Converter/Transmission System - Including Sump | 166 gal (US) | - | - |
| Note (1) | DEF Tank only available for EPA Tier 4 engine option. | - | - |
| Differential - Final Drives | - | 38 gal (US) | - |
| Brake Hoist System | - | 85 gal (US) | - |
| Torque Converter - Transmission System - LRC | - | 16 gal (US) | - |
| Brake/Hoist Hydraulic Tank | - | 46.5 gal (US) | - |
| Torque Converter - Transmission System - HRC | - | 18 gal (US) | - |
Weight Distributions - Approximate |
|||
| Front Axle - Empty | 47.20% | 50 % | - |
| Rear Axle - Empty | 52.80% | 50 % | - |
| Front Axle - Loaded | 33.30% | 34 % | - |
| Rear Axle - Loaded | 66.70% | 66 % | - |
| Note | Weight distributions optimized with Cat body. | - | - |
Final Drives |
|||
| Type | Double reduction, planetary with full floating axles. | - | - |
| Differential Ratio | 1.276:1 | 3.64:1 | - |
| Planetary Ratio | 16.67:1 | 4.80:1 | - |
| Total Reduction Ratio | 21.26:1 | 17.49:1 | - |
| Note | Double reduction, planetary with full floating axles. | - | - |
Tires |
|||
| Tires | 59/80 R63 | - | - |
| Rims | 44" x 63" | - | - |
| Note | Quick Change Rims optional. | - | - |
| Note (1) | Caterpillar recommends the customer evaluate all job conditions and consult tire manufacturer for proper tire selection and TKPH (TMPH) capabilities. | Productive capabilities of the 775G truck are such that, under certain job conditions, TKPH (TMPH) capabilities of standard or optional tires could be exceeded and, therefore, limit production. | - |
| Note (2) | - | Caterpillar recommends the customer evaluate all job conditions and consult the tire manufacturer for proper tire selection. | - |
| Standard Tire | - | 24.00R35 (E4) | - |
Braking System |
|||
| Service Brakes | Service Brakes: Four-Corner, Wet Disc, Oil Cooled, Hydraulically Actuated | - | - |
| Front Wet Disc Brake Surface Area | 20500 in² | - | - |
| Rear - Wet Disc Brake Surface Area | 30750 in² | - | - |
| Standards | Service and Secondary: ISO 3450:2011 | - | - |
| Parking Brake | Four-corner, Multi-disc, Spring Applied, Hydraulically Released | - | - |
| Load Brake | Rear service brakes | - | - |
| Note | Anti-Lock Brake System (ABS) optional with CMD package | - | - |
Capacity - HP Body - 100% Fill Factor |
|||
| Struck | 225 yd³ / 172 m³ | - | - |
| Heaped (SAE 2:1)* | 330 yd³ / 252 m³ | - | - |
| Note (1) | Consult your local Cat dealer for body recommendations. | - | - |
Cab |
|||
| Air Conditioning | HFC - 134A refrigerant: 24,300 Btu/h | - | - |
| Heater / Defroster | 38900 Btu/h | - | - |
| Note | Ambient capabilities down to -30C (-22F) for heater/defroster and up to 50C (122F) for air conditioning. | - | - |
| ROPS Standards (1) | The operator sound pressure level, 76 dB(A), complies with ISO 6394:2008 and ISO 6396:2008. | - | - |
| ROPS Standards (2) | ROPS (Rollover Protective Structure) meets ISO 3471:1994 criteria. | - | - |
| FOPS Standards | FOPS (Falling Objects Protective Structure) meets ISO 3449:1992 Level II criteria. | - | - |
Steering |
|||
| Steering Angle | 40 ° | - | - |
| Turning Diameter - Front | 122.7 ft | 77.1 ft | - |
| Steering Standards | ISO 5010:2007 | ISO 5010:2007 | - |
| Note | Turning Diameter (ISO 7457:2009) | - | - |
| Steer Angle | - | 31 ° | - |
| Turning Circle - Clearance Diameter | - | 85.6 ft | - |
Transmission |
|||
| Forward - 1 | 6.6 mile/h | 6.6 mile/h | - |
| Forward - 2 | 8.9 mile/h | 9.3 mile/h | - |
| Forward - 3 | 12 mile/h | 12.6 mile/h | - |
| Forward - 4 | 16.2 mile/h | 16.8 mile/h | - |
| Forward - 5 | 21.8 mile/h | 22.8 mile/h | - |
| Forward - 6 | 29.4 mile/h | 30.7 mile/h | - |
| Forward - 7 | 39.5 mile/h | 41.6 mile/h | - |
| Reverse | 7.4 mile/h | 8.7 mile/h | - |
| Top Speed - Loaded | 39.5 mile/h | - | - |
| Note | - | Maximum travel speeds with standard 24.00R35 (E4) tires. | - |
Dimensions |
|||
| Rear Axle - Clearance - Loaded | 3.08 ft | - | - |
| Inside Body Depth - Maximum | 11 ft | - | - |
| Overall Height - Body Raised | 51.5 ft | - | - |
| Loaded Ground Clearance | 2.58 ft | - | - |
| Loading Height - Empty | 23 ft | - | - |
| Engine Guard Clearance - Loaded | 3.33 ft | - | - |
| Height - Top of ROPS - Empty | 21.4 ft | - | - |
| Front Canopy Height - Empty | 25.33 ft | - | - |
| Overall Body Length | 48.6 ft | - | - |
| Inside Body Length | 32.75 ft | - | - |
| Overall Length | 49.5 ft | - | - |
| Wheel Base | 23.58 ft | - | - |
| Rear Axle - Tail | 12.9 ft | - | - |
| Dump Clearance | 6.58 ft | - | - |
| Centerline Front Tire Width | 21.41 ft | - | - |
| Overall Canopy Width | 29.91 ft | - | - |
| Outside Body Width | 32 ft | - | - |
| Inside Body Width | 27.91 ft | - | - |
| Centerline of Rear Dual Tire Width | 20.41 ft | - | - |
| Overall Tire Width | 31.25 ft | - | - |
Operating Specifications |
|||
| Nominal Payload Class (100%) | - | 70.5 ton (US) | - |
| Top Speed - Loaded | - | 41.6 mile/h | - |
| Maximum Working Payload (110%) | - | 77.5 ton (US) | - |
| Target Payload (100%) | - | 70.5 ton (US) | - |
| Maximum Allowable Payload (120%)* | - | 84.6 ton (US) | - |
| Note (2) | - | * Refer to the Caterpillar 10/10/20 Payload Policy for maximum gross machine weight limitations. | - |
| Note (1) | - | Capacity with Dual Slope body – no liner. | - |
| Body Capacity - SAE 2:1 | - | 55.23 yd³ | - |
Capacity - Dual Slope - 100% Fill Factor |
|||
| Struck | - | 42.7 yd³ | - |
| Heaped (SAE 2:1)* | - | 55.5 yd³ | - |
| Note (1) | - | Contact your local Cat dealer for body recommendation. | - |
| Note (2) | - | *ISO 6483:1980 | - |
Capacity - Flat Floor - 100% Fill Factor |
|||
| Struck | - | 42.2 yd³ | - |
| Heaped (SAE 2:1)* | - | 55.2 yd³ | - |
| Note (1) | - | Contact your local Cat dealer for body recommendation. | - |
| Note (2) | - | *ISO 6483:1980 | - |
Brakes |
|||
| Brake Surface - Front | - | 257 in² | - |
| Brake Surface - Rear | - | 9497 in² | - |
| Brake Standards | - | ISO 3450:2011 | - |
ROPS |
|||
| FOPS Standards | - | Falling Objects Protective Structure (FOPS) meets ISO 3449:2005 Level II FOPS criteria. | - |
| ROPS Standards | - | Rollover Protective Structure (ROPS) for cab offered by Caterpillar meets ISO 3471:2008 ROPS criteria. | - |
Sound |
|||
| Sound Standards (1) | - | The operator Equivalent Sound Pressure Level (Leq) is 76 dB(A) when SAE J1166 FEB2008 is used to measure the value for an enclosed cab. This is a work cycle sound exposure level. The cab was properly installed and maintained. The test was conducted with t | - |
| Sound Standards (2) | - | The exterior sound pressure level for the standard machine measured at a distance of 15 m (49 ft) according to the test procedures specified in SAE J88:2008, mid‑gear moving operation is 86 dB(A). | - |
| Sound Standards (3) | - | Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in a noisy environment. | - |
Sustainability |
|||
| Recyclability | - | 98% | - |
Add a Similar Product:
-
772G Off-Highway Truck Add
-
775G Off-Highway Truck Add
-
772 (07) Off-Highway Truck Add
-
798 AC Electric Drive Mining Truck Add
-
770 Off-Highway Truck Add
-
796 AC Electric Drive Mining Truck Add
-
794 AC Mining Truck Add
-
789 Next Generation Add
-
793F Mining Truck Add
-
785 Mining Truck (LRC, Tier 4 Final / EU Stage V) Add