Compare Equipment Go Back
797F Mining Truck |
796 AC Electric Drive Mining Truck |
|
|
Weights - Approximate |
|||
---|---|---|---|
Nominal Rated Payload | 400 ton (US) | 360 ton (US) | - |
Rated Gross Machine Weight | 1375000 lb | 1270000 lb | - |
Chassis Weight | 474472 lb | 448415 lb | - |
Body Weight | 94799 lb | - | - |
Note (1) | Consult your tire manufacturer for maximum tire load | Consult your tire manufacturer for maximum tire load. | - |
Note (2) | Chassis weight with full fuel and fluids, standard & mandatory attachments, hoist, body mounting group, rims, and tires. | Chassis weight with full fuel and fluids, standard & mandatory attachments, hoist, body mounting group, rims, and tires. | - |
Note (4) | Tier 4 Chassis Weight: 486263 lb (220565 kg) | - | - |
Body Weight Range | - | 38 833 – 42 907 kg (85,611 – 94,594 lb) | - |
Note (3) | - | Refer to Cat Mining Truck 10/10/20 Overload Policy (AEXQ0250) for maximum gross machine weight limitations | - |
Engine |
|||
Gross Power - SAE J1995 | 4000 HP | 3500 HP | - |
Engine Model | Cat® C175-20 | Cat® C175-16 | - |
Net Power - SAE J1349 | 3795 HP | 3405 HP | - |
Rated Speed | 1750 r/min | 1800 r/min | - |
Emissions | U.S. EPA Compliant. Where applicable, the Cat C175-20 engine is compliant with U.S. EPA emission standards.Tier 4 engine option available to meet Tier 4 Final emission standards. | - | - |
Bore | 6.9 in | 6.9 in | - |
Stroke | 8.7 in | 8.7 in | - |
Displacement | 6469 in³ | 5187 in³ | - |
Note (1) | Net Power advertised is the power available at the flywheel when the engine is equipped with air intake system, exhaust system, and alternator. | Net Power advertised is the power available at the flywheel when the engine is equipped with air intake system, exhaust system, and alternator. | - |
Note (2) | U.S. EPA Tier 4 Final available for applicable markets. | U.S. EPA Tier 4 Final / EU Stage V available for applicable markets. | - |
Note (3) | High Altitude Low Maintenance Ratio Engine Configuration (4x4) option available. | Additional fuel optimized selectable power ratings: 2312 kW / 3,100 hp | - |
Emissions Rating | - | Fuel Optimized | - |
Body Hoists |
|||
Type | Twin, two-stage hydraulic cylinders with snubbing valve. | Twin, two-stage hydraulic cylinders with snubbing valve. | - |
Pump Flow - High Idle | 317 gal/min | 257.3 gal/min | - |
Relief Valve Setting - Raise | 3510 psi | 3029 psi | - |
Body Raise Time - High Idle | 25 s | 21 s | - |
Body Lower Time - Float | 18 s | 22 s | - |
Body Power Down- High Idle | 18 s | 17.5 s | - |
Note (1) | - | Twin, two-stage hydraulic cylinders mounted outside main frame; double-acting cylinders in both stages. | - |
Note (2) | - | Power raise in both stages; power down capability in both stages. | - |
Note (3) | - | Automatic body-lower modulation reduces impact on frame. | - |
Suspension |
|||
Type | Self-contained nitrogen/oil cylinders, rear strut pin-to-pin mounting, top & bottom double shear clevis attachments | Self-contained nitrogen/oil cylinders, pin-to-pin mounting, top & bottom double shear clevis attachments | - |
Effective Cylinder Stroke - Front | 3.9 in | 4 in | - |
Effective Cylinder Stroke - Rear | 3.7 in | 2 in | - |
Rear axle - Oscillation | ±3.96 degrees | +/- 5.32 degrees | - |
Service Refill Capacities |
|||
Fuel Tank | 1000 gal (US) | 1300 gal (US) | - |
Fuel Tank (Tier 4) | 1200 gal (US) | 1200 gal (US) | - |
Diesel Exhaust Fluid Tank | 100 gal (US) | 100 gal (US) | - |
Cooling System | 306 gal (US) | 211 gal (US) | - |
Crankcase | 103 gal (US) | 82 gal (US) | - |
Front Wheels - Each | 16 gal (US) | 7 gal (US) | - |
Differentials | 330 gal (US) | - | - |
Steering Tank | 67 gal (US) | - | - |
Steering System - Including Tank | 95 gal (US) | - | - |
Brake/Hoist Tank | 203 gal (US) | - | - |
Brake Hoist System - Includes Tank | 489 gal (US) | - | - |
Torque Converter Sump | 80 gal (US) | - | - |
Torque Converter/Transmission System - Including Sump | 166 gal (US) | - | - |
Note (1) | DEF Tank only available for EPA Tier 4 engine option. | DEF Tank only available for U.S. EPA Tier 4 Final / EU Stage V engine option | - |
Final Drive - Each | - | 67 gal (US) | - |
Hydraulic Tank | - | 296 gal (US) | - |
Hydraulic System - Including Tank | - | 385 gal (US) | - |
Grease Tank | - | 90 lb | - |
Weight Distributions - Approximate |
|||
Front Axle - Empty | 47.20% | 47 % | - |
Rear Axle - Empty | 52.80% | 53 % | - |
Front Axle - Loaded | 33.30% | 33 % | - |
Rear Axle - Loaded | 66.70% | 67 % | - |
Note | Weight distributions optimized with Cat body. | Weight distributions optimized with Cat body. | - |
Final Drives |
|||
Type | Double reduction, planetary with full floating axles. | - | - |
Differential Ratio | 1.276:1 | - | - |
Planetary Ratio | 16.67:1 | - | - |
Total Reduction Ratio | 21.26:1 | - | - |
Note | Double reduction, planetary with full floating axles. | - | - |
Tires |
|||
Tires | 59/80 R63 | - | - |
Rims | 44" x 63" | 44" x 63" | - |
Note | Quick Change Rims optional. | - | - |
Note (1) | Caterpillar recommends the customer evaluate all job conditions and consult tire manufacturer for proper tire selection and TKPH (TMPH) capabilities. | Quick Change Rims optional. | - |
Standard Tires | - | 59/80 R63 | - |
Note (2) | - | Caterpillar recommends the customer evaluate all job conditions and consult tire manufacturer for proper tire selection and TKPH (TMPH) capabilities. | - |
Braking System |
|||
Service Brakes | Service Brakes: Four-Corner, Wet Disc, Oil Cooled, Hydraulically Actuated | Four-Corner, Wet Disc, Oil Cooled, Hydraulically Actuated | - |
Front Wet Disc Brake Surface Area | 20500 in² | 20378 in² | - |
Rear - Wet Disc Brake Surface Area | 30750 in² | 30750 in² | - |
Standards | Service and Secondary: ISO 3450:2011 | Service and Secondary: ISO 3450:2011 | - |
Parking Brake | Four-corner, Multi-disc, Spring Applied, Hydraulically Released | Four-corner, Multi-disc, Spring Applied, Hydraulically Released | - |
Load Brake | Rear service brakes | Rear service brakes | - |
Note | Anti-Lock Brake System (ABS) optional with CMD package | Anti-Lock Brake System (ABS) optional with CMD package | - |
Dynamic Retarding Power - Continuous | - | 5480 HP | - |
Capacity - HP Body - 100% Fill Factor |
|||
Struck | 225 yd³ / 172 m³ | - | - |
Heaped (SAE 2:1)* | 330 yd³ / 252 m³ | - | - |
Note (1) | Consult your local Cat dealer for body recommendations. | - | - |
Cab |
|||
Air Conditioning | HFC - 134A refrigerant: 24,300 Btu/h | HFC - 134A refrigerant: 21,600 Btu/h | - |
Heater / Defroster | 38900 Btu/h | 24600 Btu/h | - |
Note | Ambient capabilities down to -30C (-22F) for heater/defroster and up to 50C (122F) for air conditioning. | Ambient capabilities down to -15C (5F) for heater/defroster and up to 50C (122F) for air conditioning. | - |
ROPS Standards (1) | The operator sound pressure level, 76 dB(A), complies with ISO 6394:2008 and ISO 6396:2008. | ROPS (Rollover Protective Structure) meets ISO 3471:2008 for Operator and ISO 13459:2012 for Trainer. | - |
ROPS Standards (2) | ROPS (Rollover Protective Structure) meets ISO 3471:1994 criteria. | - | - |
FOPS Standards | FOPS (Falling Objects Protective Structure) meets ISO 3449:1992 Level II criteria. | FOPS (Falling Objects Protective Structure) meets ISO 3449:2005 Level II for Operator and ISO 13459:2012 Level II for Trainer. | - |
Steering |
|||
Steering Angle | 40 ° | - | - |
Turning Diameter - Front | 122.7 ft | 106.3 ft | - |
Steering Standards | ISO 5010:2007 | Steering Standards: ISO 5010:2007 | - |
Note | Turning Diameter (ISO 7457:2009) | Turning Diameter (ISO 7457:1997) | - |
Steer Angle | - | 39 ° | - |
Transmission |
|||
Forward - 1 | 6.6 mile/h | - | - |
Forward - 2 | 8.9 mile/h | - | - |
Forward - 3 | 12 mile/h | - | - |
Forward - 4 | 16.2 mile/h | - | - |
Forward - 5 | 21.8 mile/h | - | - |
Forward - 6 | 29.4 mile/h | - | - |
Forward - 7 | 39.5 mile/h | - | - |
Reverse | 7.4 mile/h | - | - |
Top Speed - Loaded | 39.5 mile/h | - | - |
Dimensions |
|||
Rear Axle - Clearance - Loaded | 3.08 ft | - | - |
Inside Body Depth - Maximum | 11 ft | - | - |
Overall Height - Body Raised | 51.5 ft | - | - |
Loaded Ground Clearance | 2.58 ft | - | - |
Loading Height - Empty | 23 ft | - | - |
Engine Guard Clearance - Loaded | 3.33 ft | - | - |
Height - Top of ROPS - Empty | 21.4 ft | - | - |
Front Canopy Height - Empty | 25.33 ft | - | - |
Overall Body Length | 48.6 ft | - | - |
Inside Body Length | 32.75 ft | - | - |
Overall Length | 49.5 ft | - | - |
Wheel Base | 23.58 ft | - | - |
Rear Axle - Tail | 12.9 ft | - | - |
Dump Clearance | 6.58 ft | - | - |
Centerline Front Tire Width | 21.41 ft | - | - |
Overall Canopy Width | 29.91 ft | - | - |
Outside Body Width | 32 ft | - | - |
Inside Body Width | 27.91 ft | - | - |
Centerline of Rear Dual Tire Width | 20.41 ft | - | - |
Overall Tire Width | 31.25 ft | - | - |
AC Drive System |
|||
Total Reduction Ratio | - | 35:01:00 | - |
Top Speed - Loaded | - | 40 mile/h | - |
Generator/Alternator | - | Cat brushless, engine mounted, dual bearing | - |
Controls | - | Cat IGBT Inverter Technology, air cooled, pressurized cabinet with filtration | - |
Wheel Motor | - | Cat AC induction, rear axle mounted | - |
Cooling System | - | Cat variable speed, hydraulically driven cooling system | - |
Capacity - HE Body - 100% fill factor |
|||
Struck | - | 97-153 m³ (127-200 yd³) | - |
Heaped (SAE 2:1) | - | 186-237 m³ (243-310 yd³) | - |
Note | - | Consult your local Cat dealer for body recommendations. | - |
Sound |
|||
Sound Standards | - | The operator sound pressure level, 75 dB(A), measured according to ISO 6394:2008 and ISO 6396:2008. | - |
Dimensions (Approximate) |
|||
Height - Top of ROPS | - | 22.05 ft | - |
Overall Length | - | 51.44 ft | - |
Wheel Base | - | 21.9 ft | - |
Rear Axle - Tail | - | 16.07 ft | - |
Dump Clearance - Empty | - | 5.72 ft | - |
Loading Height - Empty | - | 23.85 ft | - |
Overall Height - Body Raised | - | 48.85 ft | - |
Centerline Front Tire Width | - | 23.06 ft | - |
Front Axle Clearance - Loaded | - | 2.81 ft | - |
Overall Canopy Width (with rock deflectors) | - | 33.15 ft | - |
Outside Body/Canopy Width (without rock deflectors) | - | 31.62 ft | - |
Inside Body Width | - | 29.44 ft | - |
Front Canopy Height - Empty | - | 26.01 ft | - |
Rear Axle Clearance - Loaded | - | 2.8 ft | - |
Centerline of Rear Dual Tire Width | - | 19.5 ft | - |
Overall Tire Width - Empty | - | 30.27 ft | - |
Note | - | Dimensions listed includes canopy deflectors | - |
Add a Similar Product: