CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    160 Motor Grader
    View Product
    120 GC
    View Product Remove
    150 Motor Grader
    View Product Remove

    Engine
    Base Power (1st Gear) - Net 221 HP - -
    Engine Model Cat® C9.3 Cat® C4.4 Cat® C9.3
    Bore 4.5 in 4.1 in 4.5 in
    Stroke 5.9 in 5 in 5.9 in
    Speed at Rated Power 2,000 rpm - 2,000 rpm
    VHP Plus - Gear - Net Power - Forward 1st 221 HP - 200 HP
    Standard Capability 109 °F - 109 °F
    Torque Rise 39% - 39%
    VHP Plus - Gear - Net Power - Forward 8th 272 HP - 252 HP
    VHP Plus - Gear - Net Power - Forward 3rd 241 HP - 220 HP
    VHP Plus - Gear - Net Power - Forward 4th 252 HP - 231 HP
    VHP Plus - Gear - Net Power - Forward 2nd 231 HP - 210 HP
    VHP Plus - Gear - Net Power - Forward 6th 262 HP - 241 HP
    Maximum Torque - VHP Plus 1000 lb/ft - 920 lb/ft
    VHP Plus Range - Net 165-203 kW (221-272 hp) - 149-188 kW (200-252 hp)
    VHP Plus - Gear - Net Power - Forward 7th 267 HP - 247 HP
    VHP Plus - Gear - Net Power - Reverse 1st 221 HP - 200 HP
    Base Power (1st Gear) - Net - Metric 224 HP - 202 HP
    High Ambient - Fan Speed - Standard 1,400 rpm - 1,400 rpm
    VHP Plus - Gear - Net Power - Forward 5th 257 HP - 236 HP
    VHP Plus - Gear - Net Power - Reverse 2nd 231 HP - 210 HP
    VHP Plus Range - Net - Metric 165-203 kW (224-276 hp) - 149-188 kW (202-255 hp)
    Emissions U.S. EPA Tier 4 Final/EU Stage V Meets U.S. EPA Tier 4 Final, EU Stage V and Korea Tier 5 emission standards U.S. EPA Tier 4 Final/EU Stage V
    VHP Plus - Gear - Net Power - Reverse 3rd-6th 241 HP - 220 HP
    Displacement 567.5 in³ 268.5 in³ 567.5 in³
    Number of Cylinders 6 - 6
    Derating Altitude 10000 ft 9842 ft 10000 ft
    High Ambient - Fan Speed - Maximum 1,550 rpm - 1,550 rpm
    High Ambient - Fan Speed - Minimum 500 rpm - 500 rpm
    High - Ambient Capability 122 °F - 122 °F
    Net Power - ISO 9249/SAE J1349 - 171 HP -
    Torque Rise - ISO 9294 - 21% -
    Maximum Torque - 544 lb/ft -
    Engine Power AWD (ISO 14396) - 128 kW -
    Note (1) - Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 standards in effect at the time of manufacture. Net power advertised is the power available at rated speed of 2,000 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, -
    Net Power Range (Tier 4) - - 200 HP

    Weights
    Operating Weight - Typically Equipped 45547 lb 14496 lb 43950 lb
    Gross Vehicle Weight - Maximum - Rear Axle 38069 lb - 38069 lb
    Gross Vehicle Weight - Base - Front Axle 9907 lb - 9601 lb
    Gross Vehicle Weight - Base - Rear Axle 28812 lb - 28590 lb
    Gross Vehicle Weight - Maximum - Total 55144 lb - 55144 lb
    Operating Weight - Typically Equipped - Front Axle 13237 lb - 12549 lb
    Gross Vehicle Weight - Base - Total 38719 lb - 38191 lb
    Gross Vehicle Weight - Maximum - Front Axle 17075 lb - 17075 lb
    Operating Weight - Typically Equipped - Total 45547 lb - 43950 lb
    Operating Weight - Typically Equipped - Rear Axle 32310 lb - 31401 lb

    Moldboard
    Blade Width 14 ft 12 ft 12 ft
    Moldboard - Height 24 in - 24 in
    Moldboard - Thickness 0.87 in - 0.87 in
    Arc Radius 16.3 in 16.3 in 16.3 in
    Throat Clearance 6.5 in 4.7 in 6.5 in
    Cutting Edge Width 6 in 6 in 6 in
    Cutting Edge Thickness 0.6 in - 0.6 in
    End Bit - Width 6 in 152 in 6 in
    End Bit - Thickness 0.6 in - 0.6 in
    Blade Pull - Base GVW 25931 lb - 25732 lb
    Blade Pull - Maximum GVW 34262 lb - 34262 lb
    Blade Down Pressure - Base GVW 17004 lb - 16480 lb
    Blade Down Pressure - Maximum GVW 29308 lb - 29308 lb
    Moldboard - Blade Width 14 ft - 12 ft
    Blade Height - 20 in -

    Operating Specifications
    Top Speed - Forward 29.5 mile/h - 29 mile/h
    Top Speed - Reverse 23.3 mile/h - 23 mile/h
    Turning Radius - Outside Front Tires 25.59 ft - 25.59 ft
    Steering Range - Left/Right 50° - 50°
    Articulation Angle - Left/Right 20° - 20°
    Forward - 1st 2.6 mile/h - 2.5 mile/h
    Forward - 2nd 3.5 mile/h - 3.4 mile/h
    Forward - 3rd 5.1 mile/h - 5 mile/h
    Forward - 4th 7 mile/h - 6.9 mile/h
    Forward - 5th 10.8 mile/h - 10.6 mile/h
    Forward - 6th 14.7 mile/h - 14.5 mile/h
    Forward - 7th 20.3 mile/h - 19.9 mile/h
    Forward - 8th 29.5 mile/h - 29 mile/h
    Reverse - 1st 2 mile/h - 2 mile/h
    Reverse - 2nd 3.8 mile/h - 3.7 mile/h
    Reverse - 3rd 5.5 mile/h - 5.4 mile/h
    Reverse - 4th 8.5 mile/h - 8.4 mile/h
    Reverse - 5th 16 mile/h - 15.7 mile/h
    Reverse - 6th 23.3 mile/h - 23 mile/h

    Service Refill
    Fuel Capacity 104 gal (US) - 104 gal (US)
    Cooling System 15 gal (US) - 15 gal (US)
    Hydraulic System - Total 26.4 gal (US) - 26.4 gal (US)
    Hydraulic System - Tank 16.9 gal (US) - 16.9 gal (US)
    Transmission - Differential - Final Drives 18.5 gal (US) - 18.5 gal (US)
    Diesel Exhaust Fluid 5.8 gal (US) - 5.8 gal (US)
    Engine Oil 7.9 gal (US) - 7.9 gal (US)
    Tandem Housing - Each 22.9 gal (US) - 20 gal (US)
    Front Wheel Spindle Bearing Housing 0.13 gal (US) - 0.13 gal (US)
    Circle Drive Housing 1.8 gal (US) - 1.8 gal (US)

    Power Train
    Forward/Reverse Gears 8 Forward/6 Reverse - 8 Forward/6 Reverse
    Transmission APECS, Direct Drive, Powershift - APECS, Direct Drive, Powershift
    Brakes - Service Multiple Oil Disc - Multiple Oil Disc
    Brakes - Service - Surface Area 3565 in² - 3565 in²
    Brakes - Parking Multiple Oil Disc - Multiple Oil Disc
    Brakes - Secondary Dual Circuit Control - Dual Circuit

    Hydraulic System
    Circuit Type Parallel - Parallel
    Pump Type Variable Piston - Variable Piston
    Pump Output 55.5 gal/min - 55.7 gal/min
    Maximum System Pressure 3503 psi - 3500 psi
    Reservoir Tank Capacity 16.9 gal (US) - 16.9 gal (US)
    Standby Pressure 885 psi - 885 psi

    Frame
    Drawbar - Width 3 in - 3 in
    Circle - Diameter 61.1 in - 60.2 in
    Circle - Blade Beam Thickness 1.6 in - 1.6 in
    Drawbar - Height 6 in - 6 in
    Front Frame Structure - Width 12 in - 12 in
    Circle - Height 6.3 in - 5.4 in
    Front Frame Structure - Height 12.6 in - 12.6 in
    Drawbar - Thickness 0.5 in - 0.5 in
    Front-Top/Bottom Plate - Width 12 in - 12 in
    Front-Top/Bottom Plate - Thickness 0.87 in - 0.87 in
    Front Axle - Height to Center 23.5 in - 23.5 in
    Front Axle - Wheel Lean - Left/Right 18° - 18°
    Front Axle - Total Oscillation per Side 32° - 32°

    Blade Range
    Circle Centershift - Right 28.7 in 25.8 in 28.7 in
    Circle Centershift - Left 27.4 in 25.8 in 27.4 in
    Moldboard Sideshift - Right 26 in 26.1 in 26 in
    Moldboard Sideshift - Left 20.1 in 20.2 in 20.1 in
    Maximum Blade Position Angle 90° - 90°
    Blade Tip Range - Forward 40° 40° 40°
    Blade Tip Range - Backward 5° 5° 5°
    Maximum Lift Above Ground 17.8 in 16.1 in 18.9 in
    Maximum Depth of Cut 29.5 in 30.5 in 28.1 in
    Maximum Shoulder Reach Outside of Tires - Left 82.3 in - 70.5 in
    Maximum Shoulder Reach Outside of Tires - Right 89.7 in - 77.9 in

    Ripper
    Ripping Depth - Maximum 16.8 in - 16.8 in
    Ripper Shank Holder Spacing 21 in - 21 in
    Ripper Shank Holders 5 - 5
    Penetration Force 20812 lb - 20812 lb
    Pry-Out Force 28493 lb - 27794 lb
    Machine Length Increase, Beam Raised 40.6 in - 40.6 in

    Scarifier
    Front, V-Type, 5 or 11 Tooth - Scarifier Shank Holder Spacing 4.6 in - 4.6 in
    Front, V-Type, 5 or 11 Tooth - Scarifying Depth, Maximum 18.4 in - 18.4 in
    Mid, V-Type - Working Width 46.6 in - 46.6 in
    Rear - Scarifying Depth, Maximum 16.8 in - 16.8 in
    Front, V-Type - Working Width 47.4 in - 47.4 in
    Mid, V-Type - Scarifier Shank Holder Spacing 4.6 in - 4.6 in
    Mid, V-Type - Scarifying Depth, Maximum 11.5 in - 11.5 in
    Front, V-Type, 5 or 11 Tooth - Scarifier Shank Holders 5/11 - 11-May
    Front, V-Type, 5 or 11 Tooth - Working Width 40.6 in - 40.6 in
    Mid, V-Type - Scarifier Shank Holders 11 - 11
    Rear - Working Width 84 in - 84 in
    Rear - Scarifier Shank Holders 9 - 9
    Rear - Scarifier Shank Holder Spacing 10.5 in - 10.5 in

    Standards
    Brakes ISO 3450 - ISO 3450
    ROPS/FOPS ISO 3471; ISO 3449 - ISO 3471/ISO 3449
    Steering ISO 5010 - ISO 5010
    Sound ISO 6394; ISO 6395 - ISO 6394; ISO 6395

    Air Conditioning System
    Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes. - The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes.

    Tandems
    Height 22.5 in - 19.9 in
    Width 8 in - 7.9 in
    Sidewall Thickness - Inner 0.69 in - 0.63 in
    Sidewall Thickness - Outer 0.71 in - 0.71 in
    Drive Chain Pitch 2 in - 2 in
    Wheel Axle Spacing 60 in - 60 in
    Tandem Oscillation - Front Up 15° - 15°
    Tandem Oscillation - Front Down 25° - 25°

    Dimensions
    Height - Top of Cab 130 in - 130 in
    Length - Counterweight to Ripper 399 in - 399 in
    Width - Outside Front Tires 98.9 in - 98.9 in
    Length - Front Axle to Mid Tandem 241 in - 241 in
    Length - Front Tire to Rear of Machine 351 in - 351 in
    Length - Front Axle to Moldboard 100 in - 100 in
    Length - Between Tandem Axles 60 in - 60 in
    Width - Outside Rear Tires 98.9 in - 98.9 in
    Width - Tire Center Lines 84.3 in - 84.3 in
    Height - Front Axle Center 23.5 in - 23.5 in
    Height - Exhaust Stack 128 in - 128 in
    Height - Top of Cylinders 120 in - 120 in
    Ground Clearance - Rear Axle 13.3 in - 13.3 in
    Length of Machine* - 391.4 in -
    Maximum Height - 149.1 in -
    Width - 94.6 in -
    Note - *Typically equipped with push block and ripper. -

    Machine Weight
    All-Wheel Drive (AWD) Weight - 36376 lb -

    Service Refill Capacities
    Cooling System - 10.3 gal (US) -
    Circle Drive without Slip Clutch - 0.4 gal (US) -
    Hydraulic System - 14.5 gal (US) -
    Circle Drive with Slip Clutch - 1.8 gal (US) -
    Transmission - 4.5 gal (US) -
    Diesel Exhaust Fluid Tank (Tier 4 Only) - 3.2 gal (US) -
    Fuel Tank - 71 gal (US) -
    Engine Crankcase - 2 gal (US) -

    Sustainability
    Recyclability - 92% -
    Add a Similar Product: