CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    160 Motor Grader
    View Product
    120 GC
    View Product Remove

    Engine
    Base Power (1st Gear) - Net 221 HP - -
    Engine Model Cat® C9.3 Cat® C4.4 -
    Bore 4.5 in 4.1 in -
    Stroke 5.9 in 5 in -
    Speed at Rated Power 2,000 rpm - -
    VHP Plus - Gear - Net Power - Forward 1st 221 HP - -
    Standard Capability 109 °F - -
    Torque Rise 39% - -
    VHP Plus - Gear - Net Power - Forward 8th 272 HP - -
    VHP Plus - Gear - Net Power - Forward 3rd 241 HP - -
    VHP Plus - Gear - Net Power - Forward 4th 252 HP - -
    VHP Plus - Gear - Net Power - Forward 2nd 231 HP - -
    VHP Plus - Gear - Net Power - Forward 6th 262 HP - -
    Maximum Torque - VHP Plus 1000 lb/ft - -
    VHP Plus Range - Net 165-203 kW (221-272 hp) - -
    VHP Plus - Gear - Net Power - Forward 7th 267 HP - -
    VHP Plus - Gear - Net Power - Reverse 1st 221 HP - -
    Base Power (1st Gear) - Net - Metric 224 HP - -
    High Ambient - Fan Speed - Standard 1,400 rpm - -
    VHP Plus - Gear - Net Power - Forward 5th 257 HP - -
    VHP Plus - Gear - Net Power - Reverse 2nd 231 HP - -
    VHP Plus Range - Net - Metric 165-203 kW (224-276 hp) - -
    Emissions U.S. EPA Tier 4 Final/EU Stage V Meets U.S. EPA Tier 4 Final, EU Stage V and Korea Tier 5 emission standards -
    VHP Plus - Gear - Net Power - Reverse 3rd-6th 241 HP - -
    Displacement 567.5 in³ 268.5 in³ -
    Number of Cylinders 6 - -
    Derating Altitude 10000 ft 9842 ft -
    High Ambient - Fan Speed - Maximum 1,550 rpm - -
    High Ambient - Fan Speed - Minimum 500 rpm - -
    High - Ambient Capability 122 °F - -
    Net Power - ISO 9249/SAE J1349 - 171 HP -
    Torque Rise - ISO 9294 - 21% -
    Maximum Torque - 544 lb/ft -
    Engine Power AWD (ISO 14396) - 128 kW -
    Note (1) - Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 standards in effect at the time of manufacture. Net power advertised is the power available at rated speed of 2,000 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, -

    Weights
    Operating Weight - Typically Equipped 45547 lb 14496 lb -
    Gross Vehicle Weight - Maximum - Rear Axle 38069 lb - -
    Gross Vehicle Weight - Base - Front Axle 9907 lb - -
    Gross Vehicle Weight - Base - Rear Axle 28812 lb - -
    Gross Vehicle Weight - Maximum - Total 55144 lb - -
    Operating Weight - Typically Equipped - Front Axle 13237 lb - -
    Gross Vehicle Weight - Base - Total 38719 lb - -
    Gross Vehicle Weight - Maximum - Front Axle 17075 lb - -
    Operating Weight - Typically Equipped - Total 45547 lb - -
    Operating Weight - Typically Equipped - Rear Axle 32310 lb - -

    Moldboard
    Blade Width 14 ft 12 ft -
    Moldboard - Height 24 in - -
    Moldboard - Thickness 0.87 in - -
    Arc Radius 16.3 in 16.3 in -
    Throat Clearance 6.5 in 4.7 in -
    Cutting Edge Width 6 in 6 in -
    Cutting Edge Thickness 0.6 in - -
    End Bit - Width 6 in 152 in -
    End Bit - Thickness 0.6 in - -
    Blade Pull - Base GVW 25931 lb - -
    Blade Pull - Maximum GVW 34262 lb - -
    Blade Down Pressure - Base GVW 17004 lb - -
    Blade Down Pressure - Maximum GVW 29308 lb - -
    Moldboard - Blade Width 14 ft - -
    Blade Height - 20 in -

    Operating Specifications
    Top Speed - Forward 29.5 mile/h - -
    Top Speed - Reverse 23.3 mile/h - -
    Turning Radius - Outside Front Tires 25.59 ft - -
    Steering Range - Left/Right 50° - -
    Articulation Angle - Left/Right 20° - -
    Forward - 1st 2.6 mile/h - -
    Forward - 2nd 3.5 mile/h - -
    Forward - 3rd 5.1 mile/h - -
    Forward - 4th 7 mile/h - -
    Forward - 5th 10.8 mile/h - -
    Forward - 6th 14.7 mile/h - -
    Forward - 7th 20.3 mile/h - -
    Forward - 8th 29.5 mile/h - -
    Reverse - 1st 2 mile/h - -
    Reverse - 2nd 3.8 mile/h - -
    Reverse - 3rd 5.5 mile/h - -
    Reverse - 4th 8.5 mile/h - -
    Reverse - 5th 16 mile/h - -
    Reverse - 6th 23.3 mile/h - -

    Service Refill
    Fuel Capacity 104 gal (US) - -
    Cooling System 15 gal (US) - -
    Hydraulic System - Total 26.4 gal (US) - -
    Hydraulic System - Tank 16.9 gal (US) - -
    Transmission - Differential - Final Drives 18.5 gal (US) - -
    Diesel Exhaust Fluid 5.8 gal (US) - -
    Engine Oil 7.9 gal (US) - -
    Tandem Housing - Each 22.9 gal (US) - -
    Front Wheel Spindle Bearing Housing 0.13 gal (US) - -
    Circle Drive Housing 1.8 gal (US) - -

    Power Train
    Forward/Reverse Gears 8 Forward/6 Reverse - -
    Transmission APECS, Direct Drive, Powershift - -
    Brakes - Service Multiple Oil Disc - -
    Brakes - Service - Surface Area 3565 in² - -
    Brakes - Parking Multiple Oil Disc - -
    Brakes - Secondary Dual Circuit Control - -

    Hydraulic System
    Circuit Type Parallel - -
    Pump Type Variable Piston - -
    Pump Output 55.5 gal/min - -
    Maximum System Pressure 3503 psi - -
    Reservoir Tank Capacity 16.9 gal (US) - -
    Standby Pressure 885 psi - -

    Frame
    Drawbar - Width 3 in - -
    Circle - Diameter 61.1 in - -
    Circle - Blade Beam Thickness 1.6 in - -
    Drawbar - Height 6 in - -
    Front Frame Structure - Width 12 in - -
    Circle - Height 6.3 in - -
    Front Frame Structure - Height 12.6 in - -
    Drawbar - Thickness 0.5 in - -
    Front-Top/Bottom Plate - Width 12 in - -
    Front-Top/Bottom Plate - Thickness 0.87 in - -
    Front Axle - Height to Center 23.5 in - -
    Front Axle - Wheel Lean - Left/Right 18° - -
    Front Axle - Total Oscillation per Side 32° - -

    Blade Range
    Circle Centershift - Right 28.7 in 25.8 in -
    Circle Centershift - Left 27.4 in 25.8 in -
    Moldboard Sideshift - Right 26 in 26.1 in -
    Moldboard Sideshift - Left 20.1 in 20.2 in -
    Maximum Blade Position Angle 90° - -
    Blade Tip Range - Forward 40° 40° -
    Blade Tip Range - Backward 5° 5° -
    Maximum Lift Above Ground 17.8 in 16.1 in -
    Maximum Depth of Cut 29.5 in 30.5 in -
    Maximum Shoulder Reach Outside of Tires - Left 82.3 in - -
    Maximum Shoulder Reach Outside of Tires - Right 89.7 in - -

    Ripper
    Ripping Depth - Maximum 16.8 in - -
    Ripper Shank Holder Spacing 21 in - -
    Ripper Shank Holders 5 - -
    Penetration Force 20812 lb - -
    Pry-Out Force 28493 lb - -
    Machine Length Increase, Beam Raised 40.6 in - -

    Scarifier
    Front, V-Type, 5 or 11 Tooth - Scarifier Shank Holder Spacing 4.6 in - -
    Front, V-Type, 5 or 11 Tooth - Scarifying Depth, Maximum 18.4 in - -
    Mid, V-Type - Working Width 46.6 in - -
    Rear - Scarifying Depth, Maximum 16.8 in - -
    Front, V-Type - Working Width 47.4 in - -
    Mid, V-Type - Scarifier Shank Holder Spacing 4.6 in - -
    Mid, V-Type - Scarifying Depth, Maximum 11.5 in - -
    Front, V-Type, 5 or 11 Tooth - Scarifier Shank Holders 5/11 - -
    Front, V-Type, 5 or 11 Tooth - Working Width 40.6 in - -
    Mid, V-Type - Scarifier Shank Holders 11 - -
    Rear - Working Width 84 in - -
    Rear - Scarifier Shank Holders 9 - -
    Rear - Scarifier Shank Holder Spacing 10.5 in - -

    Standards
    Brakes ISO 3450 - -
    ROPS/FOPS ISO 3471; ISO 3449 - -
    Steering ISO 5010 - -
    Sound ISO 6394; ISO 6395 - -

    Air Conditioning System
    Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes. - -

    Tandems
    Height 22.5 in - -
    Width 8 in - -
    Sidewall Thickness - Inner 0.69 in - -
    Sidewall Thickness - Outer 0.71 in - -
    Drive Chain Pitch 2 in - -
    Wheel Axle Spacing 60 in - -
    Tandem Oscillation - Front Up 15° - -
    Tandem Oscillation - Front Down 25° - -

    Dimensions
    Height - Top of Cab 130 in - -
    Length - Counterweight to Ripper 399 in - -
    Width - Outside Front Tires 98.9 in - -
    Length - Front Axle to Mid Tandem 241 in - -
    Length - Front Tire to Rear of Machine 351 in - -
    Length - Front Axle to Moldboard 100 in - -
    Length - Between Tandem Axles 60 in - -
    Width - Outside Rear Tires 98.9 in - -
    Width - Tire Center Lines 84.3 in - -
    Height - Front Axle Center 23.5 in - -
    Height - Exhaust Stack 128 in - -
    Height - Top of Cylinders 120 in - -
    Ground Clearance - Rear Axle 13.3 in - -
    Length of Machine* - 391.4 in -
    Maximum Height - 149.1 in -
    Width - 94.6 in -
    Note - *Typically equipped with push block and ripper. -

    Machine Weight
    All-Wheel Drive (AWD) Weight - 36376 lb -

    Service Refill Capacities
    Cooling System - 10.3 gal (US) -
    Circle Drive without Slip Clutch - 0.4 gal (US) -
    Hydraulic System - 14.5 gal (US) -
    Circle Drive with Slip Clutch - 1.8 gal (US) -
    Transmission - 4.5 gal (US) -
    Diesel Exhaust Fluid Tank (Tier 4 Only) - 3.2 gal (US) -
    Fuel Tank - 71 gal (US) -
    Engine Crankcase - 2 gal (US) -

    Sustainability
    Recyclability - 92% -
    Add a Similar Product: