Compare

Compare Equipment Go Back

Engine
	160 Motor Grader View Product	120 - 2019 - N Am, Global View Product Remove	18 Motor Grader View Product Remove
Base Power (1st Gear) - Net	221 HP	-	304 HP
Engine Model	Cat® C9.3	Cat 7.1	Cat® C13
Bore	4.5 in	4.1 in	5.1 in
Stroke	5.9 in	5.3 in	6.2 in
Speed at Rated Power	2,000 rpm	-	2,000 rpm
VHP Plus - Gear - Net Power - Forward 1st	221 HP	-	-
Standard Capability	109 °F	122 °F	-
Torque Rise	39%	-	-
VHP Plus - Gear - Net Power - Forward 8th	272 HP	-	-
VHP Plus - Gear - Net Power - Forward 3rd	241 HP	-	-
VHP Plus - Gear - Net Power - Forward 4th	252 HP	-	-
VHP Plus - Gear - Net Power - Forward 2nd	231 HP	-	-
VHP Plus - Gear - Net Power - Forward 6th	262 HP	-	-
Maximum Torque - VHP Plus	1000 lb/ft	-	-
VHP Plus Range - Net	165-203 kW (221-272 hp)	-	-
VHP Plus - Gear - Net Power - Forward 7th	267 HP	-	-
VHP Plus - Gear - Net Power - Reverse 1st	221 HP	-	-
Base Power (1st Gear) - Net - Metric	224 HP	-	309 HP
High Ambient - Fan Speed - Standard	1,400 rpm	-	-
VHP Plus - Gear - Net Power - Forward 5th	257 HP	-	-
VHP Plus - Gear - Net Power - Reverse 2nd	231 HP	-	-
VHP Plus Range - Net - Metric	165-203 kW (224-276 hp)	-	-
Emissions	U.S. EPA Tier 4 Final/EU Stage V	U.S. EPA Tier 4 Final/EU Stage V - U.S. EPA Tier 3/EU Stage IIIA	-
VHP Plus - Gear - Net Power - Reverse 3rd-6th	241 HP	-	-
Displacement	567.5 in³	427.8 in³	763 in³
Number of Cylinders	6	6	6
Derating Altitude	10000 ft	9842.5 ft	-
High Ambient - Fan Speed - Maximum	1,550 rpm	-	-
High Ambient - Fan Speed - Minimum	500 rpm	-	-
High - Ambient Capability	122 °F	-	-
Note (2)	-	Net power advertised is the power available at rated speed of 2,000 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator.	-
Maximum Torque - ISO 9249	-	606 lb/ft	-
All-Wheel Drive Net Power Range (Tier 3)	-	130 HP	-
Net Power Range (Tier 3)	-	130 HP	-
Note (3)	-	Power as declared per ISO 14396	-
Engine RPM	-	2,000	-
Maximum Torque - AWD On	-	611 lb/ft	-
Note (1)	-	Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 Standards in effect at the time of manufacture."	-
Derating Altitude (AWD)	-	5499 ft	-
Torque Rise - ISO 9294	-	42%	-
Standard - Ambient Capability	-	-	122 °F
VHP Range - Net	-	-	227-266 kW (304-357 hp)
Maximum Torque - ISO 9249 - Tier 2/Stage II/Japan 2001 (Tier 2) Equivalent	-	-	1270 lb/ft
Derating Altitude - Tier 2/Stage II/Japan 2001 (Tier 2) Equivalent	-	-	12176 ft
Derating Altitude - Tier 3/Stage IIIA/Japan 2006 (Tier 3) Equivalent	-	-	12973 ft
Maximum Torque - ISO 9249 - Tier 3/Stage IIIA/Japan 2006 (Tier 3) Equivalent	-	-	1270 lb/ft
Standard - Fan Speed - Minimum	-	-	550 rpm
Emissions (1)	-	-	U.S. EPA Tier 4 Final/EU Stage V/Japan 2014 (Tier 4 Final)
Torque Rise - Tier 4/Stage IV/Japan 2014 (Tier 4 Final)	-	-	40%
Maximum Torque - ISO 9249 - Tier 4/Stage IV/Japan 2014 (Tier 4 Final)	-	-	1306 lb/ft
Derating Altitude - Tier 4/Stage IV/Japan 2014 (Tier 4 Final)	-	-	12500 ft
Torque Rise - Tier 2/Stage II/Japan 2001 (Tier 2) Equivalent	-	-	38%
Standard - Fan Speed - Maximum	-	-	1,450 rpm
Emissions (2)	-	-	Tier 3/Stage IIIA/Japan 2006 (Tier 3) Equivalent Emission Standards
Torque Rise - Tier 3/Stage IIIA/Japan 2006 (Tier 3) Equivalent	-	-	38%
VHP Range - Net - Metric	-	-	227-266 kW (309-362 hp)
Emissions (3)	-	-	Tier 2/Stage II/Japan 2001 (Tier 2) Equivalent Emission Standards
Optimized VHP Range - Net	-	-	227-266 kW (304-357 hp)
Weights
Operating Weight - Typically Equipped	45547 lb	35067 lb	74324 lb
Gross Vehicle Weight - Maximum - Rear Axle	38069 lb	-	-
Gross Vehicle Weight - Base - Front Axle	9907 lb	-	-
Gross Vehicle Weight - Base - Rear Axle	28812 lb	-	-
Gross Vehicle Weight - Maximum - Total	55144 lb	-	-
Operating Weight - Typically Equipped - Front Axle	13237 lb	-	-
Gross Vehicle Weight - Base - Total	38719 lb	-	-
Gross Vehicle Weight - Maximum - Front Axle	17075 lb	-	-
Operating Weight - Typically Equipped - Total	45547 lb	-	-
Operating Weight - Typically Equipped - Rear Axle	32310 lb	-	-
Moldboard
Blade Width	14 ft	12 ft	18 ft
Moldboard - Height	24 in	-	-
Moldboard - Thickness	0.87 in	-	-
Arc Radius	16.3 in	16.3 in	16.3 in
Throat Clearance	6.5 in	4.1 in	5 in
Cutting Edge Width	6 in	-	10 in
Cutting Edge Thickness	0.6 in	-	1.4 in
End Bit - Width	6 in	-	6 in
End Bit - Thickness	0.6 in	-	0.75 in
Blade Pull - Base GVW	25931 lb	-	-
Blade Pull - Maximum GVW	34262 lb	-	-
Blade Down Pressure - Base GVW	17004 lb	-	-
Blade Down Pressure - Maximum GVW	29308 lb	-	-
Moldboard - Blade Width	14 ft	-	-
Blade Height	-	24 in	-
End Bit	-	6 in	-
Cutting Edge	-	6 in	-
Down Force - Maximum GVW	-	-	43861 lb
Blade Pull* - Base GVW	-	-	47216 lb
Blade Pull* - Maximum GVW	-	-	52878 lb
Down Force - Base GVW	-	-	34008 lb
Thickness	-	-	1 in
Width	-	-	18 ft
Height	-	-	31 in
Note	-	-	*Blade pull calculated at 0.9 traction coefficient, which is equal to ideal no-slip conditions, and Gross Machine Weight.
Operating Specifications
Top Speed - Forward	29.5 mile/h	-	32.1 mile/h
Top Speed - Reverse	23.3 mile/h	-	25.3 mile/h
Turning Radius - Outside Front Tires	25.59 ft	-	30.5 ft
Steering Range - Left/Right	50°	-	47.5°
Articulation Angle - Left/Right	20°	-	20°
Forward - 1st	2.6 mile/h	-	2.8 mile/h
Forward - 2nd	3.5 mile/h	-	3.8 mile/h
Forward - 3rd	5.1 mile/h	-	5.5 mile/h
Forward - 4th	7 mile/h	-	7.6 mile/h
Forward - 5th	10.8 mile/h	-	11.8 mile/h
Forward - 6th	14.7 mile/h	-	16 mile/h
Forward - 7th	20.3 mile/h	-	22 mile/h
Forward - 8th	29.5 mile/h	-	32.1 mile/h
Reverse - 1st	2 mile/h	-	2.2 mile/h
Reverse - 2nd	3.8 mile/h	-	4.1 mile/h
Reverse - 3rd	5.5 mile/h	-	6 mile/h
Reverse - 4th	8.5 mile/h	-	9.3 mile/h
Reverse - 5th	16 mile/h	-	17.4 mile/h
Reverse - 6th	23.3 mile/h	-	25.3 mile/h
Note	-	-	Calculated with no slip and 23.5R25 L-3 tires.
Service Refill
Fuel Capacity	104 gal (US)	-	131 gal (US)
Cooling System	15 gal (US)	-	18.5 gal (US)
Hydraulic System - Total	26.4 gal (US)	-	38.6 gal (US)
Hydraulic System - Tank	16.9 gal (US)	-	18.5 gal (US)
Transmission - Differential - Final Drives	18.5 gal (US)	-	26 gal (US)
Diesel Exhaust Fluid	5.8 gal (US)	-	-
Engine Oil	7.9 gal (US)	-	9.5 gal (US)
Tandem Housing - Each	22.9 gal (US)	-	34 gal (US)
Front Wheel Spindle Bearing Housing	0.13 gal (US)	-	0.24 gal (US)
Circle Drive Housing	1.8 gal (US)	-	2.6 gal (US)
DEF Tank	-	-	4.2 gal (US)
Power Train
Forward/Reverse Gears	8 Forward/6 Reverse	-	8 Forward/6 Reverse
Transmission	APECS, Direct Drive, Powershift	-	Direct drive, power shift, countershaft
Brakes - Service	Multiple Oil Disc	-	Oil-actuated, oil disc
Brakes - Service - Surface Area	3565 in²	-	-
Brakes - Parking	Multiple Oil Disc	-	Spring applied, hydraulically released
Brakes - Secondary	Dual Circuit Control	-	Oil-actuated, oil-disc
Brakes - Dynamic Brake Torque per Wheel	-	-	27069.27 lb/ft
Hydraulic System
Circuit Type	Parallel	-	Electro-hydraulic load sensing, closed center
Pump Type	Variable Piston	-	Variable piston
Pump Output	55.5 gal/min	-	-
Maximum System Pressure	3503 psi	-	3590 psi
Reservoir Tank Capacity	16.9 gal (US)	-	-
Standby Pressure	885 psi	-	856 psi
Pump Output*	-	-	74 gal/min
Note	-	-	*Pump output measured at 2,150 rpm.
Frame
Drawbar - Width	3 in	-	3 in
Circle - Diameter	61.1 in	-	71.7 in
Circle - Blade Beam Thickness	1.6 in	-	2 in
Drawbar - Height	6 in	-	8 in
Front Frame Structure - Width	12 in	-	14 in
Circle - Height	6.3 in	-	-
Front Frame Structure - Height	12.6 in	-	18.1 in
Drawbar - Thickness	0.5 in	-	-
Front-Top/Bottom Plate - Width	12 in	-	-
Front-Top/Bottom Plate - Thickness	0.87 in	-	-
Front Axle - Height to Center	23.5 in	-	26.4 in
Front Axle - Wheel Lean - Left/Right	18°	-	-
Front Axle - Total Oscillation per Side	32°	-	35°
Front Frame Structure - Thickness	-	-	0.6 in
Front Axle - Wheel Lean	-	-	18° Left/17° Right
Blade Range
Circle Centershift - Right	28.7 in	-	22 in
Circle Centershift - Left	27.4 in	-	27.2 in
Moldboard Sideshift - Right	26 in	-	31.1 in
Moldboard Sideshift - Left	20.1 in	-	29.1 in
Maximum Blade Position Angle	90°	-	65°
Blade Tip Range - Forward	40°	-	40°
Blade Tip Range - Backward	5°	-	5°
Maximum Lift Above Ground	17.8 in	16.1 in	15.7 in
Maximum Depth of Cut	29.5 in	30.5 in	18.5 in
Maximum Shoulder Reach Outside of Tires - Left	82.3 in	-	103 in
Maximum Shoulder Reach Outside of Tires - Right	89.7 in	-	103 in
Blade Tip Range Forward	-	40	-
Maximum Shoulder Reach Right	-	76 in	-
Moldboard Side Shift Right	-	26.1 in	-
Maximum Shoulder Reach Left	-	69.4 in	-
Moldboard Side Shift Left	-	20.1 in	-
Circle Center Shift Left	-	26 in	-
Blade Tip Range Backward	-	5	-
Circle Center Shift Right	-	26 in	-
Ripper
Ripping Depth - Maximum	16.8 in	-	17.8 in
Ripper Shank Holder Spacing	21 in	-	-
Ripper Shank Holders	5	-	7
Penetration Force	20812 lb	-	30311 lb
Pry-Out Force	28493 lb	-	43700 lb
Machine Length Increase, Beam Raised	40.6 in	-	63.4 in
Shank Holder Spacing - Minimum	-	-	17.5 in
Shank Holder Spacing - Maximum	-	-	20 in
Scarifier
Front, V-Type, 5 or 11 Tooth - Scarifier Shank Holder Spacing	4.6 in	-	-
Front, V-Type, 5 or 11 Tooth - Scarifying Depth, Maximum	18.4 in	-	-
Mid, V-Type - Working Width	46.6 in	-	-
Rear - Scarifying Depth, Maximum	16.8 in	-	-
Front, V-Type - Working Width	47.4 in	-	-
Mid, V-Type - Scarifier Shank Holder Spacing	4.6 in	-	-
Mid, V-Type - Scarifying Depth, Maximum	11.5 in	-	-
Front, V-Type, 5 or 11 Tooth - Scarifier Shank Holders	5/11	-	-
Front, V-Type, 5 or 11 Tooth - Working Width	40.6 in	-	-
Mid, V-Type - Scarifier Shank Holders	11	-	-
Rear - Working Width	84 in	-	-
Rear - Scarifier Shank Holders	9	-	-
Rear - Scarifier Shank Holder Spacing	10.5 in	-	-
Standards
Brakes	ISO 3450	-	ISO 3450: 2011
ROPS/FOPS	ISO 3471; ISO 3449	-	ISO 3471: 2008/ISO 3449: 2005
Steering	ISO 5010	-	ISO 5010: 2007
Sound	ISO 6394; ISO 6395	-	ISO 6394: 2008/ISO 6395: 2008/ISO 6396: 2008
Air Conditioning System
Air Conditioning	The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes.	-	-
Note	-	The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.6 kg of refrigerant which has a carbon dioxide equivalent of 2.288 metric tonnes.	-
Tandems
Height	22.5 in	-	25.5 in
Width	8 in	-	9.3 in
Sidewall Thickness - Inner	0.69 in	-	0.9 in
Sidewall Thickness - Outer	0.71 in	-	0.9 in
Drive Chain Pitch	2 in	-	2.5 in
Wheel Axle Spacing	60 in	-	72.5 in
Tandem Oscillation - Front Up	15°	-	15°
Tandem Oscillation - Front Down	25°	-	25°
Dimensions
Height - Top of Cab	130 in	-	-
Length - Counterweight to Ripper	399 in	-	-
Width - Outside Front Tires	98.9 in	-	-
Length - Front Axle to Mid Tandem	241 in	-	-
Length - Front Tire to Rear of Machine	351 in	-	-
Length - Front Axle to Moldboard	100 in	-	-
Length - Between Tandem Axles	60 in	-	-
Width - Outside Rear Tires	98.9 in	-	-
Width - Tire Center Lines	84.3 in	-	-
Height - Front Axle Center	23.5 in	-	-
Height - Exhaust Stack	128 in	-	-
Height - Top of Cylinders	120 in	-	-
Ground Clearance - Rear Axle	13.3 in	-	-
Maximum Height	-	136.4 in	-
Length of Machine*	-	387 in	-
Width All Wheel Drive (AWD)	-	2551 mm	-
Width	-	102 in	-
Note	-	*Typically equipped with push block and ripper.	-
Basic Blade Width	-	12 ft	-
Service Refill Capacities
Transmission and Differential	-	9 gal (US)	-
Circle Drive	-	1.8 gal (US)	-
Fuel Tank	-	65 gal (US)	-
Cooling System	-	14 gal (US)	-
Engine Crankcase	-	4.8 gal (US)	-
Diesel Exhaust Fluid Tank (Tier 4 Only)	-	5 gal (US)	-
Hydraulic System	-	25.6 gal (US)	-
Machine Weight
Lever/Steering Wheel All-Wheel drive (AWD) Weight* Tier 4	-	36731 lb	-
Note (1)	-	*Typically equipped includes 4267 mm (14 ft) plus blade, tires, push plate, ripper, bottom guard, operator, and full fluids.	-
Joystick Weight* Tier 4	-	35358 lb	-
Joystick All-Wheel Drive (AWD) Weight* Tier 4	-	36846 lb	-
Lever/Steering Wheel Weight* Tier 4	-	35067 lb	-
Weights Tier 4 Final/Stage IV/Japan 2014 (Tier 4 Final)*
Gross Vehicle Weight - Typically Equipped - Rear Axle	-	-	53830 lb
Gross Vehicle Weight - Base** - Total	-	-	72298 lb
Gross Vehicle Weight - Maximum Tested - Rear Axle	-	-	58753 lb
Gross Vehicle Weight - Maximum Tested - Front Axle	-	-	26125 lb
Gross Vehicle Weight - Typically Equipped - Front Axle	-	-	20494 lb
Gross Vehicle Weight - Base** - Front Axle	-	-	19837 lb
Gross Vehicle Weight - Maximum Tested - Total	-	-	84877 lb
Gross Vehicle Weight - Typically Equipped - Total	-	-	74324 lb
Gross Vehicle Weight - Base** - Rear Axle	-	-	52461 lb
Note (2)	-	-	**Base operating weight calculated on standard machine configuration with 23.5R25 tires, full fuel tank operator and rops cab.
Note (1)	-	-	*No Tier 4 Final/Stage IV/Japan 2014 (Tier 4 Final) emission engine: subtract 150 kg (331 lb) from rear axle wt. & total wt.
Dimensions (Approximate)
Height - Top of Cylinders	-	-	122.6 in
Width - Outside Rear Tires	-	-	134.3 in
Height - Exhaust Stack	-	-	141.1 in
Length - Between Tandem Axles	-	-	72.5 in
Length - Front Axle to Mid Tandem	-	-	290 in
Width - Tire Center Lines	-	-	106.4 in
Length - Front Axle to Moldboard	-	-	120.7 in
Length - Counterweight to Ripper	-	-	474.4 in
Height - Front Axle Center	-	-	29.9 in
Width - Outside Front Tires	-	-	134.3 in
Length - Front Tire to Rear of Machine - Including Tow Hitch	-	-	417 in
Height - Top of Cab	-	-	147.5 in
Ground Clearance - Rear Axle	-	-	16.7 in
Variable Power Tier 4 Final/Stage IV/Japan 2014 (Tier 4 Final), Tier 3/Stage IIIA/Japan 2006 (Tier 3) Equivalent or Tier 2/Stage II/Japan 2001 (Tier 2) Equivalent Emission Standards - Metric
Gear - Forward 1st	-	-	309 HP
Gear - Forward 2nd	-	-	309 HP
Gear - Reverse 2nd	-	-	309 HP
Gear - Forward 4th	-	-	325 HP
Gear - Forward 6th	-	-	341 HP
Gear - Forward 5th	-	-	332 HP
Gear - Forward 8th	-	-	362 HP
Gear - Reverse 1st	-	-	309 HP
Gear - Forward 3rd	-	-	315 HP
Gear - Forward 7th	-	-	347 HP
Gear - Reverse 3rd-6th	-	-	315 HP
Optional Tire Arrangements
Wheel Group - 19.5×25 MP (2)	-	-	Tires: 23.5R25 Bridgestone VKT 1 Star
Wheel Group - 19.5×25 MP (1)	-	-	Tires: 23.5R25 Bridgestone VKT 2 Star
Wheel Group - 19.5×25 MP (3)	-	-	Tires: 23.5R25 Bridgestone VJT 1 Star
Wheel Group - 19.5×25 MP (4)	-	-	Tires: 23.5R25 Michelin XHA 2 Star
Wheel Group - 19.5×25 MP (5)	-	-	Tires: 23.5R25 Michelin XLDD 2 Star L5
Variable Power Tier 4 Final/Stage IV/Japan 2014 (Tier 4 Final), Tier 3/Stage IIIA/Japan 2006 (Tier 3) Equivalent or Tier 2/Stage II/Japan 2001 (Tier 2) Equivalent Emission Standards - Net
Gear - Forward 4th	-	-	321 HP
Gear - Reverse 2nd	-	-	304 HP
Gear - Forward 1st	-	-	304 HP
Gear - Reverse 3rd-6th	-	-	311 HP
Gear - Forward 3rd	-	-	311 HP
Gear - Forward 5th	-	-	327 HP
Gear - Forward 7th	-	-	342 HP
Gear - Forward 2nd	-	-	304 HP
Gear - Reverse 1st	-	-	304 HP
Gear - Forward 6th	-	-	337 HP
Gear - Forward 8th	-	-	357 HP

Compare Equipment Go Back

160 Motor Grader

120 - 2019 - N Am, Global

18 Motor Grader

Engine

Weights

Moldboard

Operating Specifications

Service Refill

Power Train

Hydraulic System

Frame

Blade Range

Ripper

Scarifier

Standards

Air Conditioning System

Tandems

Dimensions

Service Refill Capacities

Machine Weight

Weights Tier 4 Final/Stage IV/Japan 2014 (Tier 4 Final)*

Dimensions (Approximate)

Variable Power Tier 4 Final/Stage IV/Japan 2014 (Tier 4 Final), Tier 3/Stage IIIA/Japan 2006 (Tier 3) Equivalent or Tier 2/Stage II/Japan 2001 (Tier 2) Equivalent Emission Standards - Metric

Optional Tire Arrangements

Variable Power Tier 4 Final/Stage IV/Japan 2014 (Tier 4 Final), Tier 3/Stage IIIA/Japan 2006 (Tier 3) Equivalent or Tier 2/Stage II/Japan 2001 (Tier 2) Equivalent Emission Standards - Net

Earthmoving

Parts & Service

Power Systems

Technology

Contact Us