CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    160 Motor Grader
    View Product
    140 GC Motor Grader
    View Product Remove
    140 Motor Grader LVR
    View Product Remove
    120 - 2019 - N Am, Global
    View Product Remove

    Engine
    Base Power (1st Gear) - Net 221 HP - - -
    Engine Model Cat® C9.3 Cat 7.1 Cat C9.3 Cat 7.1
    Bore 4.5 in 4.1 in 4.5 in 4.1 in
    Stroke 5.9 in 5.3 in 5.9 in 5.3 in
    Speed at Rated Power 2,000 rpm - - -
    VHP Plus - Gear - Net Power - Forward 1st 221 HP - - -
    Standard Capability 109 °F 109 °F 109 °F 122 °F
    Torque Rise 39% - - -
    VHP Plus - Gear - Net Power - Forward 8th 272 HP - - -
    VHP Plus - Gear - Net Power - Forward 3rd 241 HP - - -
    VHP Plus - Gear - Net Power - Forward 4th 252 HP - - -
    VHP Plus - Gear - Net Power - Forward 2nd 231 HP - - -
    VHP Plus - Gear - Net Power - Forward 6th 262 HP - - -
    Maximum Torque - VHP Plus 1000 lb/ft - - -
    VHP Plus Range - Net 165-203 kW (221-272 hp) - - -
    VHP Plus - Gear - Net Power - Forward 7th 267 HP - - -
    VHP Plus - Gear - Net Power - Reverse 1st 221 HP - - -
    Base Power (1st Gear) - Net - Metric 224 HP - - -
    High Ambient - Fan Speed - Standard 1,400 rpm - - -
    VHP Plus - Gear - Net Power - Forward 5th 257 HP - - -
    VHP Plus - Gear - Net Power - Reverse 2nd 231 HP - - -
    VHP Plus Range - Net - Metric 165-203 kW (224-276 hp) - - -
    Emissions U.S. EPA Tier 4 Final/EU Stage V U.S. EPA Tier 4 Final/EU Stage V U.S. EPA Tier 4 Final/EU Stage V U.S. EPA Tier 4 Final/EU Stage V - U.S. EPA Tier 3/EU Stage IIIA
    VHP Plus - Gear - Net Power - Reverse 3rd-6th 241 HP - - -
    Displacement 567.5 in³ 427.8 in³ 567.5 in³ 427.8 in³
    Number of Cylinders 6 6 6 6
    Derating Altitude 10000 ft 9842 ft - 9842.5 ft
    High Ambient - Fan Speed - Maximum 1,550 rpm - - -
    High Ambient - Fan Speed - Minimum 500 rpm - - -
    High - Ambient Capability 122 °F 122 °F - -
    Engine Power (ISO 14396) - 196 HP - -
    Engine RPM - 2,200 2,000 2,000
    Maximum Torque - ISO 9249 - 616 lb/ft - 606 lb/ft
    Torque Rise - ISO 9294 - 40% 44% 42%
    Note (1) - Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 standards in effect at the time of manufacture. - Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 Standards in effect at the time of manufacture."
    Note (2) - Net power advertised is the power available at rated speed of 2,200 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator. - Net power advertised is the power available at rated speed of 2,000 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator.
    Note (3) - Power as declared per ISO 14396 - Power as declared per ISO 14396
    Engine Power AWD (ISO 14396) - 196 HP - -
    Net Power - EEC 80/1269 - - 250 HP -
    Net Power - ISO 9249/SAE J1349 - - 250 HP -
    All-Wheel Drive Net Power Range (Tier 3) - - - 130 HP
    Net Power Range (Tier 3) - - - 130 HP
    Maximum Torque - AWD On - - - 611 lb/ft
    Derating Altitude (AWD) - - - 5499 ft

    Weights
    Operating Weight - Typically Equipped 45547 lb 38912 lb 20236 lb 35067 lb
    Gross Vehicle Weight - Maximum - Rear Axle 38069 lb - - -
    Gross Vehicle Weight - Base - Front Axle 9907 lb - - -
    Gross Vehicle Weight - Base - Rear Axle 28812 lb - - -
    Gross Vehicle Weight - Maximum - Total 55144 lb - - -
    Operating Weight - Typically Equipped - Front Axle 13237 lb - - -
    Gross Vehicle Weight - Base - Total 38719 lb - - -
    Gross Vehicle Weight - Maximum - Front Axle 17075 lb - - -
    Operating Weight - Typically Equipped - Total 45547 lb - - -
    Operating Weight - Typically Equipped - Rear Axle 32310 lb - - -
    Note - * Typically equipped operating weight is calculated with full fuel tank, coolant, lubricants, operator, push block, rear ripper, tires on multi-piece rims (*17.5-25 Bias/**17.5R-25), and other equipment. - -

    Moldboard
    Blade Width 14 ft 12 ft 12 ft 12 ft
    Moldboard - Height 24 in - - -
    Moldboard - Thickness 0.87 in - - -
    Arc Radius 16.3 in 16.3 in 16.3 in 16.3 in
    Throat Clearance 6.5 in 4.4 in 6.5 in 4.1 in
    Cutting Edge Width 6 in 6 in - -
    Cutting Edge Thickness 0.6 in - - -
    End Bit - Width 6 in - - -
    End Bit - Thickness 0.6 in - - -
    Blade Pull - Base GVW 25931 lb - - -
    Blade Pull - Maximum GVW 34262 lb - - -
    Blade Down Pressure - Base GVW 17004 lb - - -
    Blade Down Pressure - Maximum GVW 29308 lb - - -
    Moldboard - Blade Width 14 ft - - -
    Blade Height - 24 in - 24 in
    End Bit - 6 in 6 in 6 in
    Cutting Edge - - 6 in 6 in

    Operating Specifications
    Top Speed - Forward 29.5 mile/h - - -
    Top Speed - Reverse 23.3 mile/h - - -
    Turning Radius - Outside Front Tires 25.59 ft - - -
    Steering Range - Left/Right 50° - - -
    Articulation Angle - Left/Right 20° - - -
    Forward - 1st 2.6 mile/h - - -
    Forward - 2nd 3.5 mile/h - - -
    Forward - 3rd 5.1 mile/h - - -
    Forward - 4th 7 mile/h - - -
    Forward - 5th 10.8 mile/h - - -
    Forward - 6th 14.7 mile/h - - -
    Forward - 7th 20.3 mile/h - - -
    Forward - 8th 29.5 mile/h - - -
    Reverse - 1st 2 mile/h - - -
    Reverse - 2nd 3.8 mile/h - - -
    Reverse - 3rd 5.5 mile/h - - -
    Reverse - 4th 8.5 mile/h - - -
    Reverse - 5th 16 mile/h - - -
    Reverse - 6th 23.3 mile/h - - -

    Service Refill
    Fuel Capacity 104 gal (US) - - -
    Cooling System 15 gal (US) - - -
    Hydraulic System - Total 26.4 gal (US) - - -
    Hydraulic System - Tank 16.9 gal (US) - - -
    Transmission - Differential - Final Drives 18.5 gal (US) - - -
    Diesel Exhaust Fluid 5.8 gal (US) - - -
    Engine Oil 7.9 gal (US) - - -
    Tandem Housing - Each 22.9 gal (US) - - -
    Front Wheel Spindle Bearing Housing 0.13 gal (US) - - -
    Circle Drive Housing 1.8 gal (US) - - -
    Hydraulic System - - 14.5 gal (US) -
    Engine Crankcase - - 7.9 gal (US) -
    Circle Drive - - 1.8 gal (US) -
    Fuel Tank - - 100 gal (US) -
    Front Wheel Spindle Bearing - Each - - 0.13 gal (US) -

    Power Train
    Forward/Reverse Gears 8 Forward/6 Reverse - - -
    Transmission APECS, Direct Drive, Powershift - - -
    Brakes - Service Multiple Oil Disc - - -
    Brakes - Service - Surface Area 3565 in² - - -
    Brakes - Parking Multiple Oil Disc - - -
    Brakes - Secondary Dual Circuit Control - - -

    Hydraulic System
    Circuit Type Parallel - - -
    Pump Type Variable Piston - - -
    Pump Output 55.5 gal/min - - -
    Maximum System Pressure 3503 psi - - -
    Reservoir Tank Capacity 16.9 gal (US) - - -
    Standby Pressure 885 psi - - -

    Frame
    Drawbar - Width 3 in - - -
    Circle - Diameter 61.1 in - - -
    Circle - Blade Beam Thickness 1.6 in - - -
    Drawbar - Height 6 in - - -
    Front Frame Structure - Width 12 in - - -
    Circle - Height 6.3 in - - -
    Front Frame Structure - Height 12.6 in - - -
    Drawbar - Thickness 0.5 in - - -
    Front-Top/Bottom Plate - Width 12 in - - -
    Front-Top/Bottom Plate - Thickness 0.87 in - - -
    Front Axle - Height to Center 23.5 in - - -
    Front Axle - Wheel Lean - Left/Right 18° - - -
    Front Axle - Total Oscillation per Side 32° - - -

    Blade Range
    Circle Centershift - Right 28.7 in - - -
    Circle Centershift - Left 27.4 in - - -
    Moldboard Sideshift - Right 26 in - - -
    Moldboard Sideshift - Left 20.1 in - - -
    Maximum Blade Position Angle 90° - - -
    Blade Tip Range - Forward 40° - - -
    Blade Tip Range - Backward 5° - - -
    Maximum Lift Above Ground 17.8 in 18.7 in 18.9 in 16.1 in
    Maximum Depth of Cut 29.5 in 28.1 in 28.9 in 30.5 in
    Maximum Shoulder Reach Outside of Tires - Left 82.3 in - - -
    Maximum Shoulder Reach Outside of Tires - Right 89.7 in - - -
    Circle Center Shift Left - 29.6 in - 26 in
    Circle Center Shift Right - 28.7 in - 26 in
    Maximum Shoulder Reach Left - 74.3 in - 69.4 in
    Maximum Shoulder Reach Right - 71.3 in - 76 in
    Moldboard Side Shift Left - 25.6 in - 20.1 in
    Moldboard Side Shift Right - 20.7 in - 26.1 in
    Blade Tip Range Backward - 5 - 5
    Blade Tip Range Forward - 40 - 40

    Ripper
    Ripping Depth - Maximum 16.8 in - - -
    Ripper Shank Holder Spacing 21 in - - -
    Ripper Shank Holders 5 - - -
    Penetration Force 20812 lb - - -
    Pry-Out Force 28493 lb - - -
    Machine Length Increase, Beam Raised 40.6 in - - -

    Scarifier
    Front, V-Type, 5 or 11 Tooth - Scarifier Shank Holder Spacing 4.6 in - - -
    Front, V-Type, 5 or 11 Tooth - Scarifying Depth, Maximum 18.4 in - - -
    Mid, V-Type - Working Width 46.6 in - - -
    Rear - Scarifying Depth, Maximum 16.8 in - - -
    Front, V-Type - Working Width 47.4 in - - -
    Mid, V-Type - Scarifier Shank Holder Spacing 4.6 in - - -
    Mid, V-Type - Scarifying Depth, Maximum 11.5 in - - -
    Front, V-Type, 5 or 11 Tooth - Scarifier Shank Holders 5/11 - - -
    Front, V-Type, 5 or 11 Tooth - Working Width 40.6 in - - -
    Mid, V-Type - Scarifier Shank Holders 11 - - -
    Rear - Working Width 84 in - - -
    Rear - Scarifier Shank Holders 9 - - -
    Rear - Scarifier Shank Holder Spacing 10.5 in - - -

    Standards
    Brakes ISO 3450 - - -
    ROPS/FOPS ISO 3471; ISO 3449 - - -
    Steering ISO 5010 - - -
    Sound ISO 6394; ISO 6395 - - -

    Air Conditioning System
    Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes. - - -
    Note - The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430).The system contains 2.0 kg of refrigerant which has a CO2 equivalent of 2.86 metric tonnes. - The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.6 kg of refrigerant which has a carbon dioxide equivalent of 2.288 metric tonnes.

    Tandems
    Height 22.5 in - - -
    Width 8 in - - -
    Sidewall Thickness - Inner 0.69 in - - -
    Sidewall Thickness - Outer 0.71 in - - -
    Drive Chain Pitch 2 in - - -
    Wheel Axle Spacing 60 in - - -
    Tandem Oscillation - Front Up 15° - - -
    Tandem Oscillation - Front Down 25° - - -

    Dimensions
    Height - Top of Cab 130 in - - -
    Length - Counterweight to Ripper 399 in - - -
    Width - Outside Front Tires 98.9 in - - -
    Length - Front Axle to Mid Tandem 241 in - - -
    Length - Front Tire to Rear of Machine 351 in - - -
    Length - Front Axle to Moldboard 100 in - - -
    Length - Between Tandem Axles 60 in - - -
    Width - Outside Rear Tires 98.9 in - - -
    Width - Tire Center Lines 84.3 in - - -
    Height - Front Axle Center 23.5 in - - -
    Height - Exhaust Stack 128 in - - -
    Height - Top of Cylinders 120 in - - -
    Ground Clearance - Rear Axle 13.3 in - - -
    Width All Wheel Drive (AWD) - 99.3 in - 2551 mm
    Length of Machine* - 406.7 in 397.6 in 387 in
    Maximum Height - 132.4 in 132 in 136.4 in
    Width - 95.6 in 97.6 in 102 in
    Note - *Typically equipped with push block and ripper. *Typically equipped with push block and ripper. *Typically equipped with push block and ripper.
    Basic Blade Width - - 140 in 12 ft

    Service Refill Capacities
    Fuel Tank - 78 gal (US) - 65 gal (US)
    Circle Drive with Slip Clutch - 2 gal (US) - -
    Circle Drive without Slip Clutch - 0.5 gal (US) - -
    Cooling System - 40 l - 14 gal (US)
    Engine Crankcase - 5.5 gal (US) - 4.8 gal (US)
    Diesel Exhaust Fluid Tank (Tier 4 Only) - 4.2 gal (US) - 5 gal (US)
    Hydraulic System - 11.9 gal (US) - 25.6 gal (US)
    Transmission - 4.8 gal (US) - -
    Transmission and Differential - - - 9 gal (US)
    Circle Drive - - - 1.8 gal (US)

    Weight
    Weight (Tier 4 Final)** - 40488 lb - -
    All-wheel Drive Weight (AWD) (Tier 4 Final)** - 42119 lb - -
    All-Wheel Drive Weight (AWD) (Stage V)* - 40543 lb - -
    Weight (Stage V)* - 38912 lb - -

    Machine Weight
    Note - - *Typically equipped with push block and ripper. -
    All-Wheel Drive (AWD) Weight - - 44613 lb -
    Weight* - - 42325 lb -
    Lever/Steering Wheel All-Wheel drive (AWD) Weight* Tier 4 - - - 36731 lb
    Note (1) - - - *Typically equipped includes 4267 mm (14 ft) plus blade, tires, push plate, ripper, bottom guard, operator, and full fluids.
    Joystick Weight* Tier 4 - - - 35358 lb
    Joystick All-Wheel Drive (AWD) Weight* Tier 4 - - - 36846 lb
    Lever/Steering Wheel Weight* Tier 4 - - - 35067 lb
    Add a Similar Product: