Compare Equipment Go Back
6015 Hydraulic Shovel |
6020B Hydraulic Shovel |
|
|
General |
|||
---|---|---|---|
Engine Output - SAE J1995 | 824 HP | 1040 HP | - |
Bucket Payload | 16.1 ton (US) | 23.8 ton (US) | - |
Operating Weight | 154.3 ton (US) | 253.8 ton (US) | - |
Note | Specifications shown above apply to highly regulated, backhoe configuration. Lesser regulated and frontless configurations are also available. | Specifications shown above apply to a Backhoe configuration. A frontless configuration is also available. | - |
Standard Bucket Capacity | - | 15.7 yd³ | - |
Engine - U.S. EPA Tier 4 Final |
|||
Engine Model | Cat® C27 | Cat® C32 ACERT™ | - |
Gross Power - SAE J1995 | 824 HP | 1033 HP | - |
Net Power - SAE J1349 | 746 HP | 1019 HP | - |
Engine - Cat C27 with Tier 4 Final Emission Standards |
|||
Number of Cylinders | 12 | - | - |
Bore | 5.4 in | - | - |
Stroke | 6 in | - | - |
Displacement | 1648 in³ | - | - |
Engine - Equivalent to U.S. EPA Tier 2 |
|||
Engine Model | Cat® C27 | Cat C32 ACERT | - |
Gross Power - SAE J1995 | 839 HP | 1040 HP | - |
Net Power - SAE J1349 | 746 HP | 1032 HP | - |
Engine - Cat C27 with Tier 1 or Tier 2 Equivalent Emission Standards |
|||
Number of Cylinders | 12 | - | - |
Bore | 5.4 in | - | - |
Stroke | 6 in | - | - |
Displacement | 1648 in³ | - | - |
Aspiration | Turbocharged and air-to-air aftercooled | - | - |
Operating Weights - Backhoe |
|||
Operating Weight | 154 ton (US) | 507500 lb | - |
Standard Track Pads | - | 2.62 ft | - |
Ground Pressure | - | 31.9 psi | - |
Weights |
|||
Ground Pressure | 23.6 psi | - | - |
Note | Operating weight includes: 700 mm (28 in) track shoes, 7.6 m (24 ft 11 in) boom, 3.4 m (11 ft 2 in) stick, standard rock bucket, 100% fuel and lubricants | - | - |
Operating Weight | 308000 lb | - | - |
Track |
|||
Standard | 28 in | - | - |
Wide | 36 in | - | - |
Extra Wide | 39 in | - | - |
Number of Shoes - Each Side | 46 | - | - |
Number of Track Rollers - Each Side | 9 | - | - |
Number of Carrier Rollers - Each Side | 3 | - | - |
Track Pads | Double grouser | - | - |
Drive |
|||
Travel Speed - Two Stages - 1st Stage - Maximum | 1.4 mile/h | - | - |
Travel Speed - Two Stages - 2nd Stage - Maximum | 2.1 mile/h | - | - |
Maximum Drawbar Pull - Forward | 192886 lbf | - | - |
Maximum Drawbar Pull - Reverse | 220987 lbf | - | - |
Gradeability - Travel Drives | Approximately 42% | - | - |
Hydraulic Track Tensioning | With accumulator | - | - |
Maximum Drawbar Pull | 179847 lbf | - | - |
Service Refill Capacities |
|||
Fuel Tank | 449 gal (US) | - | - |
Cooling System | 44 gal (US) | - | - |
Engine Oil | 23 gal (US) | - | - |
Swing Drive | 2.4 gal (US) | - | - |
Hydraulic System - Including Tank | 463 gal (US) | - | - |
Hydraulic Tank | 253 gal (US) | - | - |
Grease Tank | 18 gal (US) | - | - |
Electrical System |
|||
System Voltage | 24 V | 24V | - |
Batteries | 4 × 200 Ah (12 V each) | - | - |
Alternator Rating | 150 A (24 V) in total | - | - |
Components (1) | Emergency stop in cabin, engine module, pump room and on service station accessible from ground level | Emergency stop buttons inside cab, accessible from all seating locations, and engine module | - |
Components (2) | Four maintenance free batteries | Additional ground-level emergency stop | - |
Components (3) | Lockable battery isolation switch | 9 LED high-brightness working flood lights: – 7 for working area – 2 for rear end |
- |
Components (5) | 14 LED high-brightness working lights | 7 LED service lights | - |
Components (4) | 5 LED service lights | 2 LED high-brightness access flood lights | - |
Components (6) | 2 electric horns | 1 beacon lamp on cab roof | - |
Components (7) | Two (2) lights for rear end | - | - |
Components (9) | One (1) beacon light on cabin roof | - | - |
Components (8) | One (1) light for machine deck/service | - | - |
Batteries (12V each) - In Series/Parallel Installation | - | 630 Ah – 24V | - |
Batteries (12V each) | - | 6 × 210 Ah | - |
Battery Isolation Relays | - | manual lockable disconnect switch and automatic disconnect relay | - |
Hydraulic System |
|||
Main Pumps | 3 × variable swash plate pumps | - | - |
Main Pumps - Maximum Total Oil Flow | 407 gal/min | - | - |
Main Pumps - Maximum Pressure - Attachment | 4641 psi | - | - |
Pilot Pump | 1 × gear pump | - | - |
Pilot Pump - Maximum Flow, Pilot | 40.4 gal/min | - | - |
Pilot Pump - Maximum Pressure, Pilot | 1378 psi | - | - |
Main Pumps - Maximum Pressure - Travel | 4641 psi | - | - |
Swing Pump | 1 × variable swash plate pump | - | - |
Engine Fan Pump - Maximum Flow, Engine Fan | 53.1 gal/min | - | - |
Engine Fan Pump - Maximum Pressure, Engine Fan | 3191 psi | - | - |
Engine Fan Pump | 1 × variable swash plate pump | - | - |
Hydraulic Fan Pump - Maximum Flow, Hydraulic Fan | 22.7 gal/min | - | - |
Swing Pump - Maximum Flow - Swing | 127 gal/min | - | - |
Hydraulic Fan Pump | 1 × variable swash plate pump | - | - |
Hydraulic Fan Pump - Maximum Pressure, Hydraulic Fan | 1958 psi | - | - |
Swing Pump - Maximum Pressure - Swing | 5294 psi | - | - |
Hydraulic Oil Cooling - Maximum Flow | 284 gal/min | - | - |
Hydraulic Oil Cooling - Diameter of Fan | 40 in | - | - |
Filters (1) | Full-flow high-pressure filters (200 μm) for main pumps | - | - |
Filters (2) | Full-flow filters (20 μm) for complete return circuit | - | - |
Filters (3) | Pressure filters (16 μm) for servo circuit | - | - |
Filters (4) | Full-flow filters (6 μm) for engine cooling return circuit | - | - |
Filters (5) | Swing charge filter (15 μm) | - | - |
Filters (6) | Pump case return screens (125 μm) | - | - |
Swing System |
|||
Swing Drive | Two (2) compact planetary transmissions with axial piston motors | 2 compact planetary transmissions with axial piston motors | - |
Parking Brake | Wet multiple disc brake, spring-loaded/hydraulically released | Wet multiple-disc brake, spring-loaded/hydraulically released | - |
Maximum Swing Speed | 4.9 r/min | 4.9 r/min | - |
Swing Ring | Cross roller bearing with sealed internal gearing | Triple-race roller bearing with sealed internal gearing | - |
Features (1) | Closed-loop swing circuit with speed control | Open swing circuit with auto slow down when joysticks in neutral | - |
Features (2) | Hydraulic braking of swing motion when control is returned to neutral position or by counteracting control for stronger braking | All slew ring raceways and grease tub for internal gearing supplied by automatic, central lubrication system | - |
Features (3) | All raceways and the internal gearing of swing ring supplied by automatic central lubrication system | - | - |
Engine |
|||
Emissions | U.S. EPA Tier 4 Final and EU Stage V; China Nonroad Stage III, equivalent to U.S. EPA Tier 2; Equivalent to U.S. EPA Tier 1 | - | - |
Centralized Service Area |
|||
Feature | Accessible from ground level | - | - |
Equipped With (1) | Emergency stop | Quick couplings for: – Diesel fuel – Engine coolant – Pump transmission gear oil – Engine oil (oil pan) – Hydraulic oil |
- |
Equipped With (2) | Quick couplings for: Diesel fuel and Grease | Cat jump-start socket | - |
Equipped With (3) | - | Indicator light for hydraulic tank full | - |
Features | - | Centralized service area accessible from ground level. | - |
Undercarriage |
|||
Travel Speed - Two Stages - 1st Stage - Maximum | 1.6 mile/h | - | - |
Travel Speed - Two Stages - 2nd Stage - Maximum | 2.3 mile/h | - | - |
Maximum Drawbar Pull - Forward | 192886 lbf | - | - |
Maximum Tractive Force | 197157 lbf | 265860 lbf | - |
Maximum Drawbar Pull - Reverse | 220987 lbf | - | - |
Gradeability - Travel Drives | 38°/78% (SAE J1309) | Approximately 54% | - |
Hydraulic Track Tensioning | With accumulator | - | - |
Number of Shoes - Each Side | 46 | - | - |
Number of Track Rollers - Each Side | 9 | - | - |
Number of Carrier Rollers - Each Side | 3 | - | - |
Components (1) | Forged double-grouser track pads | Forged double-grouser track pads | - |
Components (2) | Chain links connected by hardened pins and bushings | Chain links connected by hardened pins and bushings | - |
Components (3) | Postive Pin Retention (PPR2) sealed and greased track design | All running surfaces of sprockets, idlers, rollers and track chain links hardened | - |
Components (4) | All running surfaces of sprockets, idlers, rollers and track chain links hardened | Fully hydraulic self-adjusting track tensioning system with accumulator | - |
Components (5) | Fully hydraulic self-adjusting track tensioning system with accumulator | Automatic hydraulic retarder valve to prevent overspeed on downhill travel | - |
Components (6) | Automatic hydraulic retarder valve to prevent overspeed on downhill travel | Audible travel alarm | - |
Components (7) | Audible travel alarm | - | - |
Track Pads - Each Side | - | 45 | - |
Bottom Rollers - Each Side | - | 8 | - |
Travel Speed - 1st Stage - Maximum | - | 0.68 mile/h | - |
Parking Brakes | - | Wet multiple disc brake, spring loaded/hydraulically released | - |
Travel Speed - 2nd Stage - Maximum | - | 1.49 mile/h | - |
Travel Drives - Each Side | - | 1 planetary transmission with 2 two-stage axial piston motors | - |
Support Rollers - Each Side | - | 3 | - |
Operator's Cab |
|||
Components (1) | Pressurized operator station with positive filtration | Large cab floor window with removable grating for easy cleaning | - |
Components (2) | Heated cab mirror | Pneumatically cushioned and multi-adjustable operator seat with lumbar support, safety belt, head- and armrests | - |
Components (3) | Sliding upper door window (left-hand cab door) | Safety switch in operator's seat for automatic motion shutdown | - |
Components (4) | Glass-breaking safety hammer | Joystick integrated in adjustable seat armrest | - |
Components (5) | Removable lower windshield with in cab storage bracket | Full sized trainer seat with safety belt and work table | - |
Components (6) | Joystick Controls Alternate Patterns including ISO/JIS, BHL, MHI, KOBE, or SCM | Auxiliary fold-away seat with safety belt for 3rd person | - |
Components (7) | Beverage holder | Operator Protective Guard (rock guard; approved according to ISO 10262:1998 [Top Guard]) compliant | - |
Components (8) | Literature holder | Windshield with parallel intermittent wiper/washer | - |
Components (9) | AM/FM radio | Roller blinds | - |
Components (10) | Radio with MP3 auxiliary audio port | Machine access via retractable access stairway, stairway angle approximately 45°, hydraulically operated | - |
Components (11) | Two stereo speakers | Additional emergency ladder in close proximity to emergency escape window | - |
Components (12) | Storage shelf suitable for lunch or toolbox | - | - |
Components (13) | Color LCD display with warning, filter/fluid change, and working hour information | - | - |
Components (14) | Adjustable armrest | - | - |
Components (15) | Height-adjustable joystick consoles | - | - |
Components (16) | Neutral lever (lock out) for all controls | - | - |
Components (17) | Travel control pedals with removable hand levers | - | - |
Components (18) | Two power outlets, 10 amp (total) | - | - |
Components (19) | Laminated glass front upper window and tempered other windows | - | - |
Internal Dimensions of Cab - Width | - | 5.33 ft | - |
Internal Dimensions of Cab - Length | - | 7.32 ft | - |
New BCS Features (1) | - | Robust instrument panel including large (254 mm/10 in) color touch screen | - |
New BCS Features (3) | - | Graphical data logging | - |
New BCS Features (4) | - | Fault memory capabilities | - |
Operator's Eye Level (approximate) | - | 18.04 ft | - |
New BCS Features (2) | - | On-screen troubleshooting assistance | - |
New BCS Features (5) | - | USB, Lan (TCP/IP) and CAN BUS interfaces for data export | - |
Internal Dimensions of Cab - Height | - | 6.79 ft | - |
New Board Control System (BCS) Features: | - | Electronic monitoring, data logging and diagnostic system for vital signs & service data of engines, hydraulic & lube system | - |
Automatic Lubrication System |
|||
Capacity - Grease Barrel | 18 gal (US) | 54 gal (US) | - |
Type (1) | Central bank lubrication system | Single-circuit progressive system with hydraulically driven heavy-duty pump and electronic time control | - |
Type (2) | Grease is automatically applied to all attachment pivot points (except bucket linkage) and slew bearing | Grease supplied to swing roller bearing, all pivot points of attachment, and swing gearbox bearing | - |
Type (3) | Standard grease reel on machine for bucket linkage | System condition and failures displayed by Board Control System | - |
Type (4) | Grease refill service point accessible from ground | - | - |
Attachments |
|||
Type (1) | Boom and stick torsion-resistant with welded box design | - | - |
Type (2) | High-tensile steel with solid steel castings at pivot areas | - | - |
Type (3) | Boom and stick stress-relieved after welding | - | - |
Type (4) | Float valve for boom down function | - | - |
Buckets Equipped With | – Special liner material covering main wear areas inside and outside – Lip shrouds – Wing shrouds – Heel shrouds | - | - |
Backhoe Attachment (BH) - Working Range |
|||
Maximum Digging Depth | 26.3 ft | - | - |
Maximum Digging Reach | 45.6 ft | - | - |
Maximum Digging Height | 41.9 ft | - | - |
Maximum Dump Height | 27.9 ft | - | - |
Backhoe Attachment (BH) - Digging Forces |
|||
Bucket Digging Force - ISO | 120947 lbf | - | - |
Bucket Digging Force - SAE | 112600 lbf | - | - |
Stick Digging Force - ISO | 104761 lbf | - | - |
Stick Digging Force - SAE | 98800 lbf | - | - |
Backhoe Attachment (BH) - Backhoe |
|||
Capacity 1:1 | 10.6 yd³ | - | - |
Total Width | 8.8 ft | - | - |
Number of Teeth | 5 | - | - |
Tooth System | Cat C70 or M75 | - | - |
Weight - Including Standard Wear Package | 18521 lb | - | - |
Maximum Material Density - Loose | 3030 lb/yd³ | - | - |
Hydraulic Oil Cooling |
|||
Features (2) | - | Variable electronically controlled flow of oil through cooler and fan speed | - |
Oil Flow of Cooling Pumps | - | 211 gal/min | - |
Diameter - Fan | - | 4.92 ft | - |
Features (1) | - | Cooling system fully independent of all main circuits, i.e. controlled cooling capacity available whenever engine is running | - |
Features (3) | - | Superior cooling efficiency to ensure optimum oil temperature | - |
Attachment |
|||
Type (5) | - | Float valve for boom down function | - |
Type (2) | - | High-tensile steel with solid steel castings at pivot areas | - |
Type (3) | - | Boom and stick stress-relieved after welding | - |
Type (1) | - | Boom and stick torsion-resistant with welded box design | - |
Type (4) | - | Catwalks with rails at boom | - |
Buckets Equipped With | - | – Special liner material covering main wear areas inside and outside – Lip shrouds – Wing shrouds – Heel shrouds |
- |
Hydraulic System with Electronic Pump Management |
|||
Maximum Swing Oil Flow | - | 216 gal/min | - |
Maximum Pressure - Attachment | - | 4495 psi | - |
Filters (4) | - | Pressure filters (6 μm) for servo circuit | - |
Electronic Pump Management Contains (3) | - | Automatic return of main pumps to zero flow | - |
Features (2) | - | Cooling of pump transmission gear oil | - |
Maximum Pressure - Travel | - | 4495 psi | - |
Maximum Pressure - Swing - Acceleration | - | 4495 psi | - |
Filters (3) | - | Full-flow filters (10 μm) for cooling return circuit | - |
Electronic Pump Management Contains (2) | - | Dedicated circuit pump allocation | - |
Maximum Total Oil Flow | - | 621 gal/min | - |
Filters (2) | - | Full-flow filters (10 μm) for complete return circuit | - |
Main Pumps | - | 6 × variable swash plate pumps | - |
Filters (1) | - | Full-flow high-pressure filters (100 μm) for main pumps, installed directly behind each pump | - |
Electronic Pump Management Contains (4) | - | Automatic rpm reduction of engine speed during working breaks | - |
Filters (5) | - | Transmission oil filter (40 μm) | - |
Electronic Pump Management Contains (5) | - | Reduced oil flow of main pumps at high hydraulic oil temperature and at high engine temperature | - |
Electronic Pump Management Contains (1) | - | Electronic load limit control | - |
Features (1) | - | Pressure cut-off function for all main pumps | - |
Total Volume of Hydraulic Oil | - | 925 gal (US) | - |
Hydraulic Tank Capacity | - | 740 gal (US) | - |
Maximum Pressure - Swing - Deceleration | - | 5080 psi | - |
Digging Forces |
|||
Maximum Tearout Force | - | 146125 lb | - |
Maximum Breakout Force | - | 164050 lb | - |
Working Ranges |
|||
Maximum Digging Reach | - | 52.17 ft | - |
Maximum Digging Depth | - | 26.57 ft | - |
Maximum Digging Height | - | 45.6 ft | - |
Operating Specifications |
|||
Operating Weight | - | 254 ton (US) | - |
Bucket Payload | - | 24 Sh Ton | - |
Bucket |
|||
Standard Bucket Capacity - Backhoe (Heaped 1:1) | - | 15.7 yd³ | - |
Diesel Engine - Lesser Regulated |
|||
Gross Power - SAE J1995 | - | 1040 HP | - |
Net Power - ISO 9249 | - | 1037 HP | - |
Net Power - SAE J1349 | - | 1032 HP | - |
Emissions | - | Meets China Nonroad Stage III emissions standards, equivalent to Tier 2 | - |
Diesel Engine - Tier 4 Final |
|||
Components (1) | - | Cat NOx reduction system | - |
Components (7) | - | Two-stage fuel filter | - |
Components (3) | - | MEUI™-C fuel system | - |
Alternator | - | 275A | - |
Bore | - | 5.71 in | - |
Components (4) | - | Hydraulically driven radiator fan with variable electronically controlled fan speed | - |
No. of Cylinders | - | 12 | - |
Displacement | - | 1959 in³ | - |
Fuel Tank Capacity | - | 951 gal (US) | - |
Components (5) | - | Micro processed engine management | - |
Rated Speed | - | 1,800 min-1 (1,800 rpm) | - |
Aspiration | - | Turbocharged and air-to-air aftercooled | - |
Components (2) | - | Dual Diesel Oxidation Catalysts (DOCs) | - |
Components (8) | - | Additional high-capacity water separator including electric priming pump | - |
Components (9) | - | Large fuel tank allows for 24 hour machine operation | - |
Components (6) | - | Heavy-duty air filters | - |
Maximum Altitude without Deration | - | 2925 m (9,600 ft) – above sea level (a.s.l.) | - |
Stroke | - | 6.38 in | - |
Make and Model | - | Cat C32 ACERT | - |
Diesel Engine - Equivalent to Tier 2 |
|||
Components (3) | - | Heavy-duty air filters | - |
Components (4) | - | Two-stage fuel filter | - |
Fuel Tank Capacity | - | 951 gal (US) | - |
No. of Cylinders | - | 12 | - |
Components (2) | - | Micro processed engine management | - |
Displacement | - | 1959 in³ | - |
Maximum Altitude without Deration | - | 3622 m (11,884 ft) – above sea level (a.s.l.) | - |
Bore | - | 5.71 in | - |
Components (1) | - | Hydraulically driven radiator fan with variable electronically controlled fan speed | - |
Stroke | - | 6.38 in | - |
Aspiration | - | Turbocharged and air-to-air aftercooled | - |
Components (5) | - | Additional high-capacity water separator including electric priming pump | - |
Rated Speed | - | 1800 min-1 (1,800 rpm) | - |
Alternator | - | 275A | - |
Make and Model | - | Cat C32 ACERT | - |
Components (6) | - | Large fuel tank allows for 24 hour machine operation | - |
Diesel Engine - Highly Regulated |
|||
Gross Power - SAE J1995 | - | 1033 HP | - |
Net Power - ISO 9249 | - | 1024 HP | - |
Net Power - SAE J1349 | - | 1019 HP | - |
Emissions | - | Meets Tier 4 Final and Stage V emissions standards | - |