Compare Equipment Go Back
M318 Wheeled Excavator |
M319 Wheeled Excavator |
M322 |
395 Excavator |
|
Engine |
||||
---|---|---|---|---|
Engine Power - ISO 14396 | 174 HP | 174 HP | 174 HP | 543 HP |
Engine Power - ISO 14396 (DIN) | 176 hp (metric) | 176 hp (metric) | 176 hp (metric) | 551 hp (metric) |
Engine Model | C4.4 | C4.4 | C 7.1 | Cat C18 |
Net Power - ISO 9249 | 171 HP | 171 HP | 171 HP | 542 HP |
Net Power - ISO 9249 (DIN) | 174 hp (metric) | 174 hp (metric) | 174 hp (metric) | 550 hp (metric) |
Bore | 4 in | 4.1 in | 4.1 in | 6 in |
Displacement | 285.5 in³ | 268.5 in³ | 427.8 in² | 1105 in³ |
Stroke | 5 in | 127 mm | 5.3 in | 7 in |
Biodiesel Capability | Up to B20¹ | Up to B20¹ | Up to B20¹ | B20¹ |
Emissions | Meets U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 emission standards. | Meets U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 emission standards. | Meets U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 emission standards. | Meets U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V, and Japan 2014 emission standards. |
Note (1) | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, CEM exhaust gas aftertreatment, alternator, and cooling fan with engine speed at 2,200 rpm. Advertised power is tested per the specified standar | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, CEM exhaust gas aftertreatment, alternator, and cooling fan with engine speed at 2,200 rpm. Advertised power is tested per the specified standar | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, CEM exhaust gas aftertreatment, alternator, and cooling fan with engine speed at 2,200 rpm. Advertised power is tested per the specified standar | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system and alternator with engine speed at 1,700 rpm. Advertised power is tested per the specified standard in effect at time of m |
Note (2) | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO |
Machine Weight |
||||
Operating Weight Maximum | 43980 lb | 46407 lb | 52911 lb | - |
Operating Weight Minimum | 38580 lb | 41888 lb | 44750 lb | - |
Note (1) | Operating weight includes full fuel tank, operator, bucket 610 kg (1,340 lb), and dual pneumatic tires. Weight varies depending on configuration. | - | - | - |
Note (2) | Typical configurations include 2500 mm (8'2") medium stick and 3700 kg (8,157 lb) counterweight. | - | - | - |
Drive |
||||
Maximum Travel Speed | 21.7 mile/h | - | - | - |
Hydraulic System |
||||
Main System - Maximum Flow - Implement | 67 gal/min | 67 gal/min | 95 gal/min | 281 gal/min |
Maximum Pressure - Equipment | 5366 psi | - | - | 5366 psi |
Maximum Pressure - Swing | 5149 gal/min | - | - | 4496 psi |
Maximum Pressure - Travel | 5076 gal/min | - | - | 5076 psi |
Maximum Pressure - Implement Circuit - Heavy Lift | - | 5366 psi | 5366 psi | - |
Maximum Pressure - Implement Circuit - Travel Circuit | - | 5076 psi | 5076 psi | - |
Maximum Pressure - Implement Circuit - Normal | - | 5076 psi | 5076 psi | - |
Service Refill Capacities |
||||
Cooling System | 8.5 gal (US) | 35 l | 10.6 gal (US) | 19 gal (US) |
Diesel Exhaust Fluid (DEF) | 5.3 gal (US) | 5.3 gal (US) | 7.9 gal (US) | - |
Hydraulic System - Including Tank | 68.7 gal (US) | 74 gal (US) | 71.3 gal (US) | 196 gal (US) |
Hydraulic Tank | 31.7 gal (US) | 31.7 gal (US) | 52.8 gal (US) | 98 gal (US) |
Final Drive | 0.7 gal (US) | - | - | - |
Fuel Tank | 92.5 gal (US) | 76.6 gal (US) | 124.2 gal (US) | - |
Engine Oil | - | - | 3.4 gal (US) | 18 gal (US) |
Fuel Tank Capacity | - | - | - | 322 gal (US) |
Swing Drive | - | - | - | 6 gal (US) |
Final Drive - Each | - | - | - | 5 gal (US) |
DEF Tank | - | - | - | 21 gal (US) |
Dimensions |
||||
Boom | 5205 mm (17'1") | VA 5.2 m (17'1") | VA 5.4m (17'10") | GP 8.4m (25'7") |
Bucket | 0.91 m³ GD (1.19 yd³) | GD 0.91 m³ (1.19 yd³ ) | - | SD 5.2m³ (6.8 yd³) |
Stick | 2.5 m (8' 2") | 2.5m (8'2") | 2.9m (9'2") | R4.4m (14'5") |
Shipping Height - Top of Cab | 11 ft | 10.7 ft | - | 12 ft |
Shipping Length | 27.8 ft | 26.6 ft | 31.1 ft | 49.6 ft |
Counterweight Clearance | 4.3 ft | 4.25 ft | 4.3 ft | 5.5 ft |
Ground Clearance | 1.1 ft | 1.4 ft | 1.25 ft | 2.9 ft |
Support Point | 11.5 ft | 11.6 ft | 11.3 ft | - |
Tail Swing Radius | 7.7 ft | 6.25 ft | 9.2 ft | 15.11 ft |
Wheel Base | 8.9 ft | 8.8 ft | 9 ft | - |
Undercarriage Length | - | 16.6 ft | - | - |
Shipping Height with Falling Object Guard | - | - | 11 ft | - |
Handrail Height | - | - | - | 12.4 ft |
Track Length | - | - | - | 20.1 ft |
Track Length to Center of Rollers | - | - | - | 16.1 ft |
Track Gauge | - | - | - | 11.6 ft |
Transport Width | - | - | - | 12.9 ft |
Note | - | - | - | Track gauge undercarriage extended with 900 mm (35") shoes; transport width undercarriage retracted with 900 mm (35") shoes and no steps |
Working Ranges and Forces |
||||
Boom Type | VA Boom | VA 5.2 m (17'1") | VA 5.4m (17'10") | - |
Bucket | 0.91 m³ GD (1.19 yd³) | GD 0.91 m³ (1.19 yd³ ) | GD 1.2 m³ (1.7 yd³) | - |
Digging Height | 19.3 ft | 18.9 ft | - | - |
Stick | 2.5 m (8' 2") | 2.5m (8'2") | 2.9m (9'2") | - |
Reach at Ground Level | 30.2 ft | 30.2 ft | 33.4 ft | - |
Vertical Wall Digging Depth | 15.1 ft | 14.6 ft | 17.3 ft | - |
Note (1) | Range values are with dual pneumatic tires (10.00-20). Range values are calculated with a GD bucket (CW) and CW-30 quick coupler with a tip radius of 1484 mm (4'10"). Force values are calculated with heavy lift on, a GD bucket (pin-on), and a tip radius o | - | - | - |
Bucket Forces (ISO) | 26752 lbf | 26752 lbf | 33946 lbf | - |
Stick Forces (ISO) | 16861 lbf | 16861 lbf | 23605 lbf | - |
Cutting Height | 33.7 ft | - | - | - |
Dump Height | - | 25.6 ft | - | - |
Maximum Loading Height | - | - | 24.7 ft | - |
Maximum Digging Depth | - | - | 21.8 ft | - |
Maximum Depth Cut for 2440 mm (8 ft) Level Bottom | - | - | 21.6 ft | - |
Swing Mechanism |
||||
Maximum Swing Speed | 32560 ft·lbf | - | - | - |
Swing Speed | 9.4 r/min | 9.4 r/min | - | 6.26 r/min |
Maximum Swing Torque | - | 32560 ft·lbf | - | 267333 ft·lbf |
Swing Torque | - | - | 44250 lb/ft | - |
Service Refill |
||||
Engine Oil | 2.9 gal (US) | - | - | - |
Air Conditioning System |
||||
Note | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.85 kg of refrigerant which has a CO2 equivalent of 1.216 metric tonnes. | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.0 kg of refrigerant which has a CO2 equivalent of 1.43 metric tonnes. | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.0 kg of refrigerant which has a CO2 equivalent of 1.43 metric tonnes. | - |
Air Conditioning | - | - | - | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.00 kg (2.2lb) of refrigerant, which has a CO2 equivalent of 1.430 metric tonnes (1.576 tons). |
Sustainability |
||||
Recyclability | 92% | - | - | 98% |
Transmission |
||||
Maximum Travel Speed | - | 21.7 mile/h | - | - |
Forward/Reverse - 1st Gear | - | 6.2 mile/h | 5.6 mile/h | - |
Forward/Reverse - 2nd Gear | - | 21.7 mile/h | 18.6 mile/h | - |
Creeper Speed - 1st Gear | - | 3.4 mile/h | 3.4 mile/h | - |
Creeper Speed - 2nd Gear | - | 9.3 mile/h | 9.3 mile/h | - |
Drawbar Pull | - | 23380 lbf | 28551 lbf | - |
Maximum Gradeability | - | - | 70% | - |
working Ranges and Forces |
||||
Cutting Height | - | 35.2 ft | 35.8 ft | - |
Weights |
||||
Operating Weight | - | - | - | 207400 lb |
Note (1) | - | - | - | Long Variable Gauge undercarriage, GP boom, R4.4HB2 (14'5") stick, SD 5.2 m³ (6.8 yd³) bucket, 900 mm (35") double grouser shoes and counterweight with removal device. |
Working Ranges & Forces |
||||
Maximum Digging Depth | - | - | - | 31.9 ft |
Boom | - | - | - | GP 8.4m (25'7") |
Stick | - | - | - | R4.4m (14'5") |
Bucket | - | - | - | SD 5.2m³ (6.8 yd³) |
Maximum Reach at Ground Level | - | - | - | 48.3 ft |
Maximum Cutting Height | - | - | - | 44.5 ft |
Maximum Loading Height | - | - | - | 30.4 ft |
Minimum Loading Height | - | - | - | 9.11 ft |
Maximum Depth Cut for 2440 mm (8 ft) Level Bottom | - | - | - | 31.4 ft |
Maximum Vertical Wall Digging Depth | - | - | - | 22.3 ft |
Bucket Digging Force - ISO | - | - | - | 86100 ft·lbf |
Stick Digging Force - ISO | - | - | - | 68540 ft·lbf |
Add a Similar Product:
- M320 Wheeled Excavator Add
- M316 Wheeled Excavator Add
- M314 Wheeled Excavator Add
- M315 Wheeled Excavator Add
- 352 UHD Ultra High Demolition Hydraulic Excavator Add
- 340 UHD Ultra High Demolition Hydraulic Excavator Add
- 352 LRE Long Reach Excavation Hydraulic Excavator Add
- 352 Hydraulic Excavator Add
- 374 Hydraulic Excavator Add
- Cat® 340 Hydraulic Excavator Add