Compare Equipment Go Back

M318 Wheeled Excavator
M319 Wheeled Excavator
395 Excavator

Engine

Engine Power - ISO 14396 174 HP 174 HP 543 HP
Engine Power - ISO 14396 (DIN) 176 hp (metric) 176 hp (metric) 551 hp (metric)
Engine Model C4.4 C4.4 Cat C18
Net Power - ISO 9249 171 HP 171 HP 542 HP
Net Power - ISO 9249 (DIN) 174 hp (metric) 174 hp (metric) 550 hp (metric)
Bore 4 in 4.1 in 6 in
Displacement 285.5 in³ 268.5 in³ 1105 in³
Stroke 5 in 127 mm 7 in
Biodiesel Capability Up to B20¹ Up to B20¹ B20¹
Emissions Meets U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 emission standards. Meets U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 emission standards. Meets U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V, and Japan 2014 emission standards.
Note (1) Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, CEM exhaust gas aftertreatment, alternator, and cooling fan with engine speed at 2,200 rpm. Advertised power is tested per the specified standar Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, CEM exhaust gas aftertreatment, alternator, and cooling fan with engine speed at 2,200 rpm. Advertised power is tested per the specified standar Net power advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system and alternator with engine speed at 1,700 rpm. Advertised power is tested per the specified standard in effect at time of m
Note (2) ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO

Machine Weight

Operating Weight Maximum 43980 lb 46407 lb -
Operating Weight Minimum 38580 lb 41888 lb -
Note (1) Operating weight includes full fuel tank, operator, bucket 610 kg (1,340 lb), and dual pneumatic tires. Weight varies depending on configuration. - -
Note (2) Typical configurations include 2500 mm (8'2") medium stick and 3700 kg (8,157 lb) counterweight. - -

Drive

Maximum Travel Speed 21.7 mile/h - -

Hydraulic System

Main System - Maximum Flow - Implement 67 gal/min 67 gal/min 281 gal/min
Maximum Pressure - Equipment 5366 psi - 5366 psi
Maximum Pressure - Swing 5149 gal/min - 4496 psi
Maximum Pressure - Travel 5076 gal/min - 5076 psi
Maximum Pressure - Implement Circuit - Heavy Lift - 5366 psi -
Maximum Pressure - Implement Circuit - Travel Circuit - 5076 psi -
Maximum Pressure - Implement Circuit - Normal - 5076 psi -

Service Refill Capacities

Cooling System 8.5 gal (US) 35 l 19 gal (US)
Diesel Exhaust Fluid (DEF) 5.3 gal (US) 5.3 gal (US) -
Hydraulic System - Including Tank 68.7 gal (US) 74 gal (US) 196 gal (US)
Hydraulic Tank 31.7 gal (US) 31.7 gal (US) 98 gal (US)
Final Drive 0.7 gal (US) - -
Fuel Tank 92.5 gal (US) 76.6 gal (US) -
Fuel Tank Capacity - - 322 gal (US)
Engine Oil - - 18 gal (US)
Swing Drive - - 6 gal (US)
Final Drive - Each - - 5 gal (US)
DEF Tank - - 21 gal (US)

Dimensions

Boom 5205 mm (17'1") VA 5.2 m (17'1") GP 8.4m (25'7")
Bucket 0.91 m³ GD (1.19 yd³) GD 0.91 m³ (1.19 yd³ ) SD 5.2m³ (6.8 yd³)
Stick 2.5 m (8' 2") 2.5m (8'2") R4.4m (14'5")
Shipping Height - Top of Cab 11 ft 10.7 ft 12 ft
Shipping Length 27.8 ft 26.6 ft 49.6 ft
Counterweight Clearance 4.3 ft 4.25 ft 5.5 ft
Ground Clearance 1.1 ft 1.4 ft 2.9 ft
Support Point 11.5 ft 11.6 ft -
Tail Swing Radius 7.7 ft 6.25 ft 15.11 ft
Wheel Base 8.9 ft 8.8 ft -
Undercarriage Length - 16.6 ft -
Handrail Height - - 12.4 ft
Track Length - - 20.1 ft
Track Length to Center of Rollers - - 16.1 ft
Track Gauge - - 11.6 ft
Transport Width - - 12.9 ft
Note - - Track gauge undercarriage extended with 900 mm (35") shoes; transport width undercarriage retracted with 900 mm (35") shoes and no steps

Working Ranges and Forces

Boom Type VA Boom VA 5.2 m (17'1") -
Bucket 0.91 m³ GD (1.19 yd³) GD 0.91 m³ (1.19 yd³ ) -
Digging Height 19.3 ft 18.9 ft -
Stick 2.5 m (8' 2") 2.5m (8'2") -
Reach at Ground Level 30.2 ft 30.2 ft -
Vertical Wall Digging Depth 15.1 ft 14.6 ft -
Note (1) Range values are with dual pneumatic tires (10.00-20). Range values are calculated with a GD bucket (CW) and CW-30 quick coupler with a tip radius of 1484 mm (4'10"). Force values are calculated with heavy lift on, a GD bucket (pin-on), and a tip radius o - -
Bucket Forces (ISO) 26752 lbf 26752 lbf -
Stick Forces (ISO) 16861 lbf 16861 lbf -
Cutting Height 33.7 ft - -
Dump Height - 25.6 ft -

Swing Mechanism

Maximum Swing Speed 32560 ft·lbf - -
Swing Speed 9.4 r/min 9.4 r/min 6.26 r/min
Maximum Swing Torque - 32560 ft·lbf 267333 ft·lbf

Service Refill

Engine Oil 2.9 gal (US) - -

Air Conditioning System

Note The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.85 kg of refrigerant which has a CO2 equivalent of 1.216 metric tonnes. The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.0 kg of refrigerant which has a CO2 equivalent of 1.43 metric tonnes. -
Air Conditioning - - The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.00 kg (2.2lb) of refrigerant, which has a CO2 equivalent of 1.430 metric tonnes (1.576 tons).

Sustainability

Recyclability 92% - 98%

Transmission

Maximum Travel Speed - 21.7 mile/h -
Forward/Reverse - 1st Gear - 6.2 mile/h -
Forward/Reverse - 2nd Gear - 21.7 mile/h -
Creeper Speed - 1st Gear - 3.4 mile/h -
Creeper Speed - 2nd Gear - 9.3 mile/h -
Drawbar Pull - 23380 lbf -

working Ranges and Forces

Cutting Height - 35.2 ft -

Weights

Operating Weight - - 207400 lb
Note (1) - - Long Variable Gauge undercarriage, GP boom, R4.4HB2 (14'5") stick, SD 5.2 m³ (6.8 yd³) bucket, 900 mm (35") double grouser shoes and counterweight with removal device.

Working Ranges & Forces

Maximum Digging Depth - - 31.9 ft
Boom - - GP 8.4m (25'7")
Stick - - R4.4m (14'5")
Bucket - - SD 5.2m³ (6.8 yd³)
Maximum Reach at Ground Level - - 48.3 ft
Maximum Cutting Height - - 44.5 ft
Maximum Loading Height - - 30.4 ft
Minimum Loading Height - - 9.11 ft
Maximum Depth Cut for 2440 mm (8 ft) Level Bottom - - 31.4 ft
Maximum Vertical Wall Digging Depth - - 22.3 ft
Bucket Digging Force - ISO - - 86100 ft·lbf
Stick Digging Force - ISO - - 68540 ft·lbf
Add a Similar Product:
  • M320 Wheeled Excavator Add
  • M322 Add
  • M316 Wheeled Excavator Add
  • 352 LRE Long Reach Excavation Hydraulic Excavator Add
  • M314 Wheeled Excavator Add
  • M315 Wheeled Excavator Add
  • 340 UHD Ultra High Demolition Hydraulic Excavator Add
  • 352 UHD Ultra High Demolition Hydraulic Excavator Add
  • 374 Hydraulic Excavator Add
  • 340 Hydraulic Excavator Add