Compare Equipment Go Back
 MD6310 Rotary Blasthole Drill 13.7 m or 17.5 m (44.9 ft or 57.4 ft) Mast Configuration |
 MD6200 Rotary Blasthole Drill Specifications |
|
|
Pull-Down/Hoisting Capacity |
|||
|---|---|---|---|
| Pull-Down Capacity | Up to 39 009 kg (86,000 lb) | Up to 15 876 kg (Up to 35,000 lb) | - |
Specifications |
|||
| Hole Diameter | 229-311 mm (9-12.25 in) | 140-200 mm (5.5-7.87 in) | - |
| Engine | Cat® C32B | Cat© C18 | - |
| Bit Load | Up to 42 149 kg (Up to 92,922 lb) | Up to 16 964 kg (37,400 lb) | - |
Dimensions (Approximate) - 17.5 m (57.4 ft) Mast |
|||
| Body Length - Standard Cab | 43.54 ft | - | - |
| Length - Mast Down - Extended Cab | 83.33 ft | - | - |
| Length - Mast Down - Standard Cab | 81.69 ft | - | - |
| Width - Front | 17.68 ft | - | - |
| Body Length - Extended Cab | 42.24 ft | - | - |
| Height - Mast Up | 77.99 ft | - | - |
| Width - Rear | 20.73 ft | - | - |
Basic Specs |
|||
| 13.7 m (44.9 ft) Mast - Hoist Speed | 122.7 ft/min | - | - |
| 17.5 m (57.4 ft) Mast - Hoist Speed | 122.7 ft/min | - | - |
| Emissions (Equivalent to Tier 2): Engine | C32B @ 1,800 rpm | - | - |
| 13.7 m (44.9 ft) Mast - Hole Diameter Range 203-311 mm (8-12.25 in) - Multi Pass Depth | Down to 74.6 m (Down to 244.9 ft) | - | - |
| 17.5 m (57.4 ft) Mast - Hole Diameter Range 203-311 mm (8-12.25 in) - Multi Pass Depth | Down to 47.9 m (Down to 157.4 ft) | - | - |
| 17.5 m (57.4 ft) Mast - Pulldown Capacity | Up to 39 009 kg (Up to 86,000 lb) | - | - |
| 17.5 m (57.4 ft) Mast - Hole Diameter Range 203-311 mm (8-12.25 in) - Single Pass Depth | 57.4 ft | - | - |
| 13.7 m (44.9 ft) Mast - Hole Diameter Range | 203-311 mm (8-12.25 in) | - | - |
| Angle Drilling | Vertical to 30° (in 5° increments) | - | - |
| 17.5 m (57.4 ft) Mast - Hole Diameter Range | 203-311 mm (8-12.25 in) | - | - |
| 17.5 m (57.4 ft) Mast - Bit Load - Single Pass | Up to 42 149 kg (Up to 92,922 lb) | - | - |
| 13.7 m (44.9 ft) Mast - Hoist Capacity | Up to 22 113 kg (Up to 48,750 lb) | - | - |
| Compressor - Rotary Drilling (1) | 56.6 m³/min (2,000 ft³/min) @ 8.6 bar (125 psi) | - | - |
| Compressor - Rotary Drilling (2) | 73.6 m³/min (2,600 ft³/min) @ 7.6 bar (110 psi) | - | - |
| 13.7 m (44.9 ft) Mast - Pulldown Capacity | Up to 39 009 kg (Up to 86,000 lb) | - | - |
| 13.7 m (44.9 ft) Mast - Hole Diameter Range 203-311 mm (8-12.25 in) - Single Pass Depth | 44.9 ft | - | - |
| Emissions (U.S. EPA Tier 4 Final): Engine | C32B @ 1,800 rpm | - | - |
| Compressor - DTH Drilling | 42.2 m³/min (1,500 ft³/min) @ 34.4 bar (500 psi) | 29.7 m_/min (1,050 ft_/min) @ 24.1 bar (350 psi) | - |
| 17.5 m (57.4 ft) Mast - Hoist Capacity | Up to 22 113 kg (Up to 48,750 lb) | - | - |
| 13.7 m (44.9 ft) Mast - Bit Load - Single Pass | Up to 41 165 kg (Up to 90,753 lb) | - | - |
| Emissions (U.S. EPA Tier 4 Final): Power Rating ISO 14396 | 1007 HP | - | - |
| Emissions (Equivalent to Tier 2): Power Rating ISO 14396 | 1031 HP | - | - |
| U.S. EPA Tier 2 Equivalent - Engine | - | C18 @ 1,800 rpm | - |
| U.S. EPA Tier 2 Equivalent - Emissions | - | U.S. EPA Tier 2 equivalent | - |
| U.S. EPA Tier 4 Final - Engine | - | C18 @ 1,800 rpm | - |
| U.S. EPA Tier 4 Final - Emissions | - | U.S. EPA Tier 4 Final | - |
| Compressor - Rotary Drilling | - | 32.6 cmm (1,150 cfm) @ 8.6 bar (125 psi) | - |
| Angle Drilling Available | - | 30 degrees to 0 degrees in 5-degree increments | - |
| Bit Load (single-Pass) | - | 37400 lb | - |
| Hoist Speed | - | 4.3 ft/s | - |
| Hole Diameter Range | - | 140-200 mm (5.5-7.87 in) | - |
| Hole Depth Range - Single-Pass Depth | - | 36 ft | - |
| Pull-DownCapacity | - | Up to 15 876 kg (Up to 35,000 lb) | - |
| Hoist Capacity | - | Up to 11 907 kg (Up to 26,250 lb) | - |
| Hole Depth Range - Multi-Pass Depth | - | Down to 47.58 m (Down to 156 ft) | - |
| U.S. EPA Tier 4 Final - Power Rating (ISO 14396) | - | 589 HP | - |
| U.S. EPA Tier 2 Equivalent - Power Rating (ISO 14396) | - | 587 HP | - |
Undercarriage |
|||
| Drawbar Pull | 122971 lbf | 262 000 Nm (193,241 lbf-ft) | - |
| Track chain guards and guides | Level two | - | - |
| Travel Speed | 1.5 mile/h | - | - |
| Lower rollers | Fourteen (14) | Eight (8) | - |
| Model | Cat® 349E EL Excavator type | Cat® 336 Excavator type | - |
| Carrier Rollers | Three (3) | Three (3) | - |
| Triple grousers for soft rock ground bearing pressure 1.28 bar (18.5 psi) | 29.5 in | - | - |
| Triple Grousers (1) | - | 600 mm (23.6 in); 0.89 bar (12.6 psi) ground pressure | - |
| Components (1) | - | Track chain guards and guides | - |
| Travel Speed - High | - | 2 mile/h | - |
| Travel Speed - Low | - | 1.3 mile/h | - |
Safety and Security |
|||
| Components (10) | In-deck mounted battery box | Machine lifting provisions | - |
| Components (9) | Self-closing, gates secure egress ladder locations | Slip resistant platform surfaces | - |
| Components (12) | Air hose retention devices | - | - |
| Components (2) | Seven (7) engine shut down buttons: in cab, at drill deck, on deck at power train, ground accessible by main access point and each side of the drill front and left | Hinged window guard over the full length of the front drill window | - |
| Components (6) | Guards for exhaust pipes and turbo lines | Automatic, audible tram alarm | - |
| Feature | Approach angle of 14 degrees facilitates loading and unloading on a lowboy | - | - |
| Components (7) | Mast access ladder with mast grating (option) | Battery disconnect and starter switches can be locked out | - |
| Components (4) | Tram alarm is automatic and audible | Self-closing gates | - |
| Components (11) | Ground level keyed battery disconnect/starter lockout with remote jump start terminals | FOPS Certified Operator Cab | - |
| Components (1) | Alloy drill deck covers, with storage provision | Seven (7) emergency stop buttons | - |
| Components (5) | Hinged protective guard for full front drill window | Electric horn activated by push button in the cab | - |
| Components (3) | Electric horn activated by push button in the cab | Conditional safety interlocks | - |
| Components (8) | Three egress points on deck areas in addition to main access | Air hose retention devices | - |
| Feature (1) | - | Approach angle of 15-degrees facilitates loading and unloading on a lowboy | - |
Operating System Controls - Standard |
|||
| Components (10) | Filter indicators for hydraulic, compressor and engine | Data logging of machine health with warnings and fault code records with export capability | - |
| Components (14) | ECM controlled proportional fan speed control system | Tram interlock, machine stability limits | - |
| Components (23) | Data logging of machine health with warnings, and fault code records; export capability | - | - |
| Components (20) | Cabin pressure manometer with indicator (option) | Pre wired for Terrain and Autonomous Operation | - |
| Components (3) | Rotation torque control | Virtual rotary head travel stops | - |
| Components (12) | Dust suppression control | Mast lock indicator | - |
| Components (17) | Tram interlock, mast up and locked or down and parked | Tram interlock, jacks retracted | - |
| Components (1) | All electric controls for drilling, tramming, leveling plus auxiliary functions | Electric controls for drilling, tramming, leveling plus auxiliary functions | - |
| Components (22) | Prewired for Terrain and autonomous operation | - | - |
| Components (8) | Delayed engine shut down | Filter indicators for hydraulic, fuel, compressor and engine | - |
| Components (19) | Cab environment controls (AC, filter, heat, fan speeds) | Cab environment controls (AC, heat, fan speeds) | - |
| Components (7) | Drill performance and display system | Delayed engine shut down | - |
| Components (13) | Mast lock indicator | ECM proportional fan speed control system | - |
| Components (6) | Drill depth meter | Drill performance and display system | - |
| Components (2) | Electronic compressor control | Rotary torque control | - |
| Components (4) | Virtual rotary head travel stops and interlocks | Pipe positioner engaged/disengaged indicator | - |
| Components (11) | Jack pressure sensors in the display | Dust suppression control | - |
| Components (5) | Pipe positioner engaged/disengaged indicator | Drill depth meter | - |
| Components (18) | Tram interlock, jacks retracted | Tram interlock, winch parked | - |
| Components (16) | Tram interlock, pipe in hole | Tram interlock, mast up and locked or down and parked | - |
| Components (21) | Dust curtain lifting system – auto hydraulic raise front and rear (option) | - | - |
| Components (15) | Tram interlock, machine stability limits | Tram interlock, pipe in hole | - |
| Components (9) | Rotary head rpm gauge – (digital display in screen) | Jack pressure sensors | - |
Dimensions (Approximate) - 13.7 m (44.9 ft) Mast |
|||
| Body Length - Standard Cab | 43.54 ft | - | - |
| Body Length - Extended Cab | 42.24 ft | - | - |
| Width - Rear | 20.74 ft | - | - |
| Length - Mast Down - Standard Cab | 69.23 ft | - | - |
| Length - Mast Down - Extended Cab | 70.87 ft | - | - |
| Height - Mast Up | 65.39 ft | - | - |
| Width - Front | 17.68 ft | - | - |
Mast |
|||
| Note (2) | Configuration choices include single pass, multi pass, vertical out to 30 degree angle drilling | - | - |
| Features (12) | Pipe catcher; manual or optional hydraulically actuated | - | - |
| Features (4) | Feed system accommodates multiple pipe diameters | - | - |
| Note (1) | Hydraulic, indexing pipe carousels accept various pipe diameters | - | - |
| Features (13) | Tool oiler 113.5 L (30 gal) oil injection system (Rotary drilling only) | - | - |
| Features (2) | Pulldown/hoist system is a single cylinder | - | - |
| Features (1) | 13.7 m (44.9 ft) or 17.5 m (57.4 ft) Mast configurations complete with pipe rack carousel | - | - |
| Features (9) | Drill pipe positioner | - | - |
| Features (10) | Overhead winch with remote; variable speed drive with ≥ 1818 kg (4,000 lb) rating, length to reach 6.1 m (20 ft) past drill deck (option) | - | - |
| Features (3) | Auto tensioning of pull down and hoist cables | - | - |
| Features (6) | Sliding deck wrench assembly | - | - |
| Features (11) | Rotation Gear Box with dual motor arrangement, up to 160 rpm, and 16,000 N∙m of torque (11,800 ft-lb) | - | - |
| Features (15) | Mast access ladder and grating (option) | - | - |
| Features (5) | Variable grip hydraulic break out wrench (HOBO) for range of pipe diameters | - | - |
| Features (7) | Configured with roller deck bushing for tricone applications, two-piece deck bushing for DTH | - | - |
| Features (14) | Mast lanyard mounting provisions (option) | - | - |
| Features (8) | Angle drilling 0-30°; in 5° increments | - | - |
Engine Choices |
|||
| Components (4) | Ether starting aid; ether bottle supplied locally | - | - |
| Components (2) | Scheduled oil sampling (S∙O∙SSM) ports | - | - |
| Components (1) | Dual starter motors | - | - |
| Components (3) | Common air intake filters provide +500 hour service interval in normal operating conditions | - | - |
Service Packages |
|||
| Package (1) | Basic/Manual – Centralized Manual Lube; Gravity Fill for fuel and water | Basic Package: Centralized manual lubrication for all pivot points, gravity fill for fuel and water | - |
| Package (2) | Standard – Fast Fill for fuel and water; Automatic Lubrication System | Standard Package: Automated lubrication system, fast fill for fuel and water (option) | - |
| Package (3) | Premium – Service center for lubricant drain and fill (compressor oil, hydraulic oil, gearbox oil, engine oil, tool lubrication and grease), Automatic Lubrication System, Fast Fill for fuel and water, blowdown hose | Premium Package: Automated lubrication system, fast fill fuel and water, service center for lubricant drain and fill plus blowdown hose (option) | - |
Dust Suppression Choices |
|||
| Water injection and dry dust collector (option) | – Water tank capacity 1514 L (400 gal) – 204 m³/min (7,200 cfm) dry dust collector – Self-cleaning filters, with auto-eject dust chute |
- | - |
| Water Injection - Standard | – Water tank capacity 1514 L (400 gal) | - | - |
| Choices (1) | Dust curtain hydraulic lifters raise front and rear dust curtains (option) (recommended with dust collector) | - | - |
| Choices (3) | Static dust curtains, four sides boxed in (standard) | - | - |
| High Volume Water Injection System - Not Compatible with Basic Service Package | – Water tanks total capacity 3785 L (1,000 gal) maximum – Primary tank above deck – 1514 L (400 gal) capacity (heated for extreme cold weather) – Secondary tank above deck – 2271 L (600 gal) capacity deck |
- | - |
| Choices (2) | Tram off spray to wet the ground around the cuttings pile (not recommended for cold weather applications) | - | - |
Tool Package Rotary |
|||
| Components (4) | Top Sub, or Shock sub and cross over adapter (option) | Bit sub | - |
| Components (3) | Deck wrench, sliding | Deck wrench | - |
| Components (5) | Bit sub | Top sub | - |
| Components (1) | Roller deck bushing | One-piece roller deck bushing | - |
| Components (6) | Pipe wiper seal | Pipe wiper seal | - |
| Components (2) | Pipe positioner inserts | Pipe positioner clamps | - |
| Components (7) | - | Drill tool lubricator (optional) | - |
Compressor/Receiver Choices |
|||
| Rotary Drilling (2) | 73.6 m³/min (2,600 ft³/min) @ 7.6 bar (110 psi) | - | - |
| Receiver Tank Choice (1) | Low pressure 8.6 bar (125 psi) for ASME/CR N/AU or CE | - | - |
| Rotary Drilling (1) | 56.6 m³/min (2,000 ft³/min) @ 8.6 bar (125 psi) | - | - |
| DTH Drilling - Includes Tool Lubrication and Hammer Storage | 42.2 m³/min (1,500 ft³/min) @ 34.4 bar (500 psi) | - | - |
| Note | With the compressors variable volume control, the operator can limit air output resulting in reduced fuel consumption – Both high and low pressure compressors contain this feature |
- | - |
| Receiver Tank Choice (2) | High pressure 34.4 bar (500 psi) for ASME/CR N/AU or CE | - | - |
| Choice | Electronic compressor control and regulation with purged air lines | - | - |
Frame and Work Deck |
|||
| Components (5) | Four (4) lift lugs, for use with cables or chains | - | - |
| Components (7) | Bit storage box in-deck with hinged cover (option) | - | - |
| Components (6) | Walkway around cab to drill deck (option) | - | - |
| Features (2) | Slip resistant surface | Slip resistant surfaces | - |
| Features (3) | Fuel tank capacity 1609 L (425 gal) | Fuel tank capacity 833 L (220 gal) | - |
| Components (1) | Stationary rear deck; for vertical and angle drilling | Three leveling jacks provide leveling on a 7� bench (any orientation) | - |
| Components (2) | Four leveling jacks to provide leveling on a 7° bench (any orientation) | Heavy duty tow hooks (non-drill end) | - |
| Features (6) | Three egress points on deck areas in addition to main access | - | - |
| Components (10) | Drill pipe thread greaser with remote fill tank or disposable grease bucket (option) | - | - |
| Features (7) | Sturdy guardrails, toe guards, self closing gates | - | - |
| Components (4) | Heavy duty tow hooks (front end) | - | - |
| Components (3) | Manual, centralized, lubrication banks for all pivot points on drill, or automated lubrication system (option) | Four (4) lift lugs, for use with cables or chains | - |
| Components (8) | DTH hammer storage on drill deck with high pressure configuration (option) | - | - |
| Features (4) | Fuel capacity expansion for additional +1609 L (425 gal) | - | - |
| Features (5) | Bolt-on platform for cold weather generator or fire suppression bottles (option) | - | - |
| Components (9) | Hydraulically operated viewing hatch in drill deck with spotlight (option) | - | - |
| Features (1) | Jacks, mast pivot and deck are welded integrally to mainframe for maximum durability and long life | Jacks, mast pivot and deck are welded integrally to mainframe for maximum durability and long life | - |
Cooling |
|||
| Components (2) | Separate engine cooling module | All cooler core sections are replaceable | - |
| Components (1) | Coolers with easy cleaning access | Coolers with easy cleaning access | - |
| Components (3) | Replaceable cooler core sections | Functional in ambient temperature of up to 52� C (125� F) | - |
| Components (4) | Automatic variable speed fan control | Automatic variable speed fan control | - |
| Features | Functional in ambient temperature of 52° C (125° F) | - | - |
Automation and Technology |
|||
| Components (6) | Wiring for third party interface | - | - |
| Components (3) | Drill assist (single or multipass auto drill) (options) | Cat Terrain ready | - |
| Components (5) | Optional Command for Drilling enables each operator to manage more than one machine | - | - |
| Type | Autonomy ready | - | - |
| Components (2) | Auto level, auto retract, auto mast | Drill Assist Automated Functionality (onboard technology): - Auto Level (with auto retract jacks) - Auto Mast (raise, lower and lock into place) - Auto Dril (single pass) |
- |
| Components (1) | Drill depth indicator and interlocks | Drill depth meter | - |
| Optional Cat Terrain for Drills - Mining System Interface | – Production – Navigation |
- | - |
| Components (4) | Product Link Elite (hardware from factory, subscription package via dealer) | Product Link™ Elite | - |
| Type (1) | - | Autonomous ready | - |
Drill Pipe |
|||
| 7.62 m (25 ft) pipes - pipe rack carousel holds a quantity of four or five pipes, 17.5 m (57.4 ft) Mast: Rotary (1) | 8 in | - | - |
| 7.62 m (25 ft) pipes - pipe rack carousel holds a quantity of four or five pipes, 17.5 m (57.4 ft) Mast: DTH | 7 in | - | - |
| 7.62 m (25 ft) pipes - pipe rack carousel holds a quantity of four or five pipes, 17.5 m (57.4 ft) Mast: Rotary or DTH | 7.625 in | - | - |
| 7.62 m (25 ft) pipes - pipe rack carousel holds a quantity of four or five pipes, 17.5 m (57.4 ft) Mast: Rotary (2) | 8.625 in | - | - |
| 7.62 m (25 ft) pipes - pipe rack carousel holds a quantity of four or five pipes, 17.5 m (57.4 ft) Mast: Rotary | 9.25 in | - | - |
| 12.19 m (40 ft) pipes - pipe rack carousel holds a quantity of four (4) or five (5) pipes, 13.7 m (44.9 ft) Mast: Rotary (2) | 8.625 in | - | - |
| 12.19 m (40 ft) pipes - pipe rack carousel holds a quantity of four (4) or five (5) pipes, 13.7 m (44.9 ft) Mast: Rotary (1) | 8 in | - | - |
| 12.19 m (40 ft) pipes - pipe rack carousel holds a quantity of four (4) or five (5) pipes, 13.7 m (44.9 ft) Mast: DTH | 7 in | - | - |
| 12.19 m (40 ft) pipes - pipe rack carousel holds a quantity of four (4) or five (5) pipes, 13.7 m (44.9 ft) Mast: Rotary or DTH | 7.625 in | - | - |
| Note | Dual purpose carousel pipe: 13.7 m (44.9 ft) Mast; holds quantity of two (2) 12.19 m (40 ft) pipes and quantity of two (2) 9.14 m (30 ft) pipes, and adapters to connect to DTH hammer and tricone bit (DTH hammer and tricone not included)
|
- | - |
| 9.14 m (30 ft) pipes - Accepts quantity of four (4) - Option 5 | - | 6 in | - |
| 9.14 m (30 ft) pipes - Accepts quantity of four (4) - Option 4 | - | 5.5 in | - |
Climate Choices |
|||
| Climate Level 2 Arctic Fluids and Lubricants | Rated down to –18° C (–0.4° F) temperatures | - | - |
| Climate Level 1 Standard Fluids and Lubricants (1) | Rated down to –1° C (30° F) temperatures | Rated down to -1C (30 F) | - |
| Climate Level 1 Standard Fluids and Lubricants (2) | Withstands high heat to 52° C (125° F) | Withstands high heat up to 52 C (125 F) | - |
| Climate Level 4 Arctic Fluids and Lubricants, Heating Package (6) | Breaker panel includes five (5) additional breakers for locally supplied heating elements, if needed | - | - |
| Climate Level 4 Arctic Fluids and Lubricants, Heating Package (3) | Full arctic lubricant package includes: engine oil, compressor oil and hydraulic oil | - | - |
| Climate Level 4 Arctic Fluids and Lubricants, Heating Package (1) | Rated down to –40° C (–40° F) temperatures | - | - |
| Climate Level 4 Arctic Fluids and Lubricants, Heating Package (5) | Shore power connection box with switchable 240-600V (50 amp) connection; diesel genset and or plug, sold separately | - | - |
| Climate Level 4 Arctic Fluids and Lubricants, Heating Package (2) | Diesel fired heating system that heats and circulates engine coolant through the: engine block, primary water tank, heating elements for battery trays with a provision for fuel tanks | - | - |
| Climate Level 4 Arctic Fluids and Lubricants, Heating Package (4) | Electric heating package with breaker panel to power: 120V heating blanket for compressor receiver tank, compressor control box, heat trace for compressor control lines, heat trace for housing from water tank to water pump and water fast-fill assembly plu | - | - |
| Climate Level 2 Arctic Fluids and Lubricants, Engine Block and Manifold Heater 120V or 240V | - | Rated down to -18 C (0 F) | - |
Overhead Winch System (optional) |
|||
| Cable Diameter | 0.5 in | - | - |
| Winch Reach - Past The Drill Deck | 20 ft | - | - |
| Capacity Rating | 4000 lb | - | - |
| Note | Variable speed control | - | - |
Operator Environment |
|||
| Lighting | – LED interior lights; separate reading light, and backlit joysticks and keypads – Zone controls for area lights and spot lighting for night drilling – Flood lights for the drill perimeter – Spot lights for power group area; drill deck; mast caro |
- LED interior lights, backlit joysticks and keypads - Flood lights for the drill perimeter; area spotlights - Mast beacon and tram flashing strobe light (option) |
- |
| Components (7) | Operator station design integrates an ergonomic seat, armchair joystick controls with full instrumentation, and two 254 mm (10 in) color, high definition touchscreens and 12 volt power port | - | - |
| Components (4) | Drill performance touchscreen display | - | - |
| Components (3) | Cab perimeter walkway available for both cab sizes | - | - |
| Components (1) | Spacious FOPS cab has 3 m² (32.4 ft²) floor space with an integrated operator station | - | - |
| Components (13) | Seat swivels, locks and has two point/76 mm (3 in) seat belt, tilts (5° adjustment), lumbar support, fore/aft seat adjustment 80 mm (3.1 in) | - | - |
| Components (9) | Power convertor 24V to 12V | - | - |
| Components (2) | Extended cab option 4.2 m² (45.2 ft²); prewired and dedicated space for refrigerator and microwave | - | - |
| HVAC | – Floor vents in the foot rest area – Roof-mounted air conditioner/heating/pressurizing unit – Filter access from deck, does not require roof access, and has approximately 500 hour service interval – Defogging HVAC vents on driller window |
- Floor heating vent - Filter access from deck, 500 hour service interval - Defogging HVAC vents on main window |
- |
| Components (6) | Two swing-out hinged doors with windows and Cat keyed locks | - | - |
| Components (14) | Trainer’s seat that folds away and has retractable seat belt (optional) | - | - |
| Cameras | – Mounted on the front and left sides to provide 360° view from operator's seat – Camera on the mast to view pipe carousel/top drive operation |
- Three (3) CC cameras (front, right and left sides) provide 360° visibility from operators seat; camera on the mast to view pipe carousel/top drive operation | - |
| Components (5) | Cab rubber shock-mounts absorb mechanical vibration and restrict exterior noise | - | - |
| Components (10) | Radio-ready for communication and entertainment radio | - | - |
| Cab - Premium | – Leather seat with heat and ventilation – Dual pane window glass – Front window guard – Additional in-cab storage box – Additional windshield wipers on front and rear windows – Window shades (option) – Foldaway trainer’s seat (option) | - | - |
| Components (11) | Cab roof access ladder (option) | - | - |
| Cab - Standard | – Fabric seat – Single pane window glass – Windshield wiper for driller window – Window shades (option) – Foldaway trainer’s seat (option) – Removable floor mat |
- | - |
| Components (8) | Additional display screen for cc cameras; color, high-definition 254 mm (10 in) | - | - |
| Components (12) | Literature holder | - | - |
| Cab Design | - | Falling Object Protective Structure (FOPS) certified cab includes: - Rubber shock-mounts to absorb mechanical vibration - Operator station design that integrates an ergonomic seat, joystick controls with full instrumentation, dual 254 mm (10 in) hig |
- |
| Cab Packages | - | Standard configuration includes a fabric seat, removable floor mat, single pane window glass and driller window guard Premium configuration includes a leather seat with heat and ventilation, heavy duty suspension, dual pane window glass a |
- |
| Seating | - | - Swivel seat is fully ergonomic, with tilt (5° adjustment), lumbar support, and fore/aft seat adjustment 80 mm (3.1 in) - Seat locks and has two point retractable, 76 mm (3 in) seat belt |
- |
| Windows | - | - Large windows on the front, rear and right cab side; full length drill window with guard - Window shades (option) - Windshield wiper with a common washer tank - Manometer Pressure Gauge (option) |
- |
Rotary Head Top Drive System |
|||
| Components (4) | Virtual rotary head travel stops and interlocks | - | - |
| Components (3) | Rotary torque control | Virtual rotary head travel interlocks | - |
| Components (2) | Rotation gear box with dual motor arrangement, up to 160 rpm, and 16 000 N∙m (11,800 lbf-ft) of torque | Virtual rotary head travel interlocks | - |
| Components (1) | Spindle with 168 mm (6.625 in) API regular thread and splined collar | Rotary torque control | - |
| Torque - Single Motor | - | 6166 lb/ft | - |
| Rotation Speed | - | 0-150 rpm | - |
Hydraulics |
|||
| Components (2) | One (1) auxiliary circuit pump – 110 cc (piston, load sensing) | One (1) auxiliary circuit pump: 45 cc (piston, load sensing) | - |
| Components (3) | Two (2) fan pumps – 1,000 cc (piston, with proportional electronic controls) | One (1) fan pump: 45 cc (piston with proportional electronic controls) | - |
| Components (1) | Two (2) primary pumps – 210 cc (piston, with proportional electronic controls) | Two (2) main pumps: 85 cc (piston with proportional electronic controls) | - |
| Components (4) | Two (2) charge pumps – 43.9 + 56.5 cc (double stack gear, fixed displacement) | One (1) charge pump: 73.8 cc (gear, fixed displacement) | - |
| Components (5) | Scheduled Oil Sampling (S∙O∙S) ports | Scheduled Oil Sampling (S-O-S SM) ports | - |
Tool Package DTH |
|||
| Components (1) | Two piece bushing | Two-piece bushing | - |
| Components (6) | Pipe wiper seal | Pipe wiper seal | - |
| Components (4) | Shock sub and top sub adapter | Shock sub | - |
| Components (5) | Cross over hammer adapter | Cross over subs | - |
| Components (3) | Deck wrench, sliding | Deck wrench | - |
| Components (2) | Pipe positioner inserts | Pipe positioner clamps | - |
| Components (8) | - | Top sub | - |
| Components (7) | - | Drill tool lubricator is included with selection of DTH Compressor | - |
Frame Access Choices |
|||
| Choice (1) | Fixed access ladder to the cab area | Fixed access steps to the cab area | - |
| Choice (3) | Cab perimeter walkway available with either choice | Platform access to the cab with full length service access walkway includes fixed access steps and self-closing gates | - |
| Choice (2) | Cascading, hydraulic stairs to cab area (option) – includes jack and tram interlock that activates when the stairs are down | Small platform to the cab includes fixed access steps | - |
Mast Packages |
|||
| Mast Accessories Hydraulic (2) | One hydraulic pipe catcher, plus one wire rope, hydraulically actuated pipe positioner, hydraulic bit basket | - | - |
| Mast Accessories Hydraulic (1) | One hydraulic pipe catcher, hydraulically actuated pipe positioner, hydraulic bit basket | - | - |
| Angle Drilling | Included with either mast | - | - |
| Mast Accessories Manual, 17.5 m (57.4 ft) Mast | Two wire rope pipe catchers, hydraulically actuated pipe positioner, manual bit basket | - | - |
| Mast Accessories Manual, 13.7 m (44.9 ft) Mast | One wire rope pipe catcher, hydraulically actuated pipe positioner, manual bit basket | - | - |
| Single-Pass Depth | - | 36 ft | - |
| Multi-Pass Depth | - | Down to 47.58 m (Down to 156 ft) | - |
| Pulldown - Rated Single Cylinder Pull-Down/Hoist System | - | Up to 15 876 kg (Up to 35,000 lb) | - |
| Hoist | - | Up to 11 907 kg (Up to 26,250 lb) | - |
Carousel (Mast size and pipe diameter dependent) |
|||
| 13.7 m (44.9 ft) Mast Carousel; holds quantity of 4 × 12.19 m (40 ft) pipes; total depth 62.5 m (204.9 ft): Pipe diameters | 178 mm (7 in), 194 mm (7.625 in), 203 mm (8 in), 219 mm (8.625 in) | - | - |
| 13.7 m (44.9 ft) Mast Carousel; holds quantity of 5 × 12.19 m (40 ft) pipes; total depth 74.6 m (244.9 ft): Pipe diameters | 194 mm (7.625 in), 219 mm (8.625 in) | - | - |
| 17.5 m (57.4 ft) Mast Carousel; holds quantity of 2 × 7.62 m (25 ft) pipes; total depth 32.7 m (107.4 ft): Pipe diameter | 9.25 in | - | - |
| 17.5 m (57.4 ft) Mast Carousel; holds quantity of 4 × 7.62 m (25 ft) pipes; total depth 48 m (157.5 ft): Pipe diameters | 178 mm (7 in), 194 mm (7.625 in), 203 mm (8 in), 219 mm (8.625 in) | - | - |
| Note | 13.7 m (44.9 ft) Mast Carousel, dual purpose; holds quantity of two (2) 12.19 m (40 ft) pipes and quantity of two (2) 9.14 m (30 ft) pipes, and adapters to connect to DTH hammer and tricone bit (DTH hammer and tricone not included)
|
- | - |
Service Tool Options |
|||
| Option | Bushing Retention Tool 178 to 235 mm (7.00 to 9.25 in) pipe diameter | - | - |
| Lifting Bails (Available on Request) | – 114 mm (4.5 in) API reg thread – 140 mm (5.5 in) API reg thread – 168 mm (6.625 in) for top sub/shock sub API thread – 114 mm (4.5 in) for 178 mm (7 in) pipe BECO thread – 152 mm (6 in) for 194 mm (7.625 in) up to 235 mm (9.25 in) pipe BECO |
- | - |
Weights - 13.7 m (44.9 ft) Mast |
|||
| Working Weight Range - Minimum/Maximum | 75 800/97 000 kg (167,110/213,848 lb) | - | - |
Hydraulic Break Out Wrench |
|||
| Variable Grip Hydraulic Break Out Wrench Grip Ranges (2) | 235 mm (9.25 in) | - | - |
| Variable Grip Hydraulic Break Out Wrench Grip Ranges (1) | 178-219 mm (7.0-8.625 in) | - | - |
Weights - 17.5 m (57.4 ft) Mast |
|||
| Working Weight Range - Minimum/Maximum | 75 500/97 500 kg (166,449/214,950 lb) | - | - |
Compressor Choices |
|||
| DTH Drilling | - | Includes tool lubrication system | - |
| Rotary Drilling | - | Optional tool lubrication system | - |
| Note | - | With the compressor's electronic controls plus variable volume control, the operator can adjust air output to reach optimal match of tool, flushing air and ground conditions. Both high and low pressure compressors contain this feature. | - |
| DTH Drilling - 1050 cfm/350 psi | - | 29.7 cmm (1,050 cfm) @ 24.1 bar (350 psi) with 113.5 L (30 gal) tool oiler | - |
| Rotary Drilling - 1150 cfm/125 psi | - | 32.6 cmm (1,150 cfm) @ 8.6 bar (125 psi) | - |
Receiver Tank Choices |
|||
| Choice (1) | - | Low pressure 8.6 bar (125 psi) | - |
| Choice (2) | - | High pressure 24.1 bar (350 psi) | - |
Drill Deck Misc. |
|||
| Components (1) | - | Drill pipe thread greaser with remote fill tank that also accommodates disposable grease bucket | - |
Dust Control Choices |
|||
| High Volume Water Injection - Maximum - Tank Above Deck - Capacity | - | 200 gal (US) | - |
| Water Injection - Tank Mounted Below Front Deck - Components | - | Water flow meter, volume control, tank fill level indicator | - |
| High Volume Water Injection - Maximum - Tank Below Deck - Capacity | - | 200 gal (US) | - |
| Water Injection - Tank Mounted Below Front Deck | - | 200 gal (US) | - |
| High Volume Water Injection - Maximum - Tanks Total Capacity | - | 400 gal (US) | - |
| Water Injection plus Dust Collector (1) | - | 76.5 cmm (2,700 cfm) dust collector; includes standard water injection | - |
| Water Injection plus Dust Collector (2) | - | Self-cleaning filters, dust chute clean-out door | - |
| Choices (1) | - | Static dust curtains, four sides boxed enclosed | - |
| Choices (2) | - | Dust curtain hydraulic lifters raise front and rear dust curtains (option) (recommended with dry dust collector) | - |
| Choices (3) | - | Tram off spray system (option) | - |
Engine Features |
|||
| Feature (3) | - | Tier 4 Final package complete with DEF/Engine Shutdown Control Package | - |
| Feature (1) | - | Dual starter motors | - |
| Feature (2) | - | Ether starting aid | - |
Dimensions (Approximate) |
|||
| Width cab end* | - | 13.7 ft | - |
| Width non-cab end | - | 11.7 ft | - |
| Height mast up | - | 54.3 ft | - |
| Body Length | - | 31 ft | - |
| Length mast down | - | 57.5 ft | - |
| Height mast down | - | 11.75 ft | - |
| Mast only length | - | 52.1 ft | - |
| Note | - | *Contact the factory for width with platform access to cab or service platform walkway. | - |
Mast and Pipe Carousel Features |
|||
| Features (1) | - | Pipe carousel: Accepts quantity of four (4) 9.14 m (30 ft) pipes |
- |
| Features (2) | - | Standard angle drilling package (0 to 30 degrees, in�5-degree�increments) | - |
| Features (4) | - | Hydraulically actuated, self-indexing pipe carousel accepts pipe diameters up to 152 mm (6.0 in) | - |
| Features (5) | - | Drills strings configured for bit changes above deck | - |
| Features (6) | - | Single cylinder pulldown/hoist system | - |
| Features (7) | - | Sliding deck wrench assembly | - |
| Features (8) | - | Configured with roller deck bushing (for low pressure/tricone drilling) | - |
| Features (9) | - | Two-piece deck bushing (for high pressure DTH drilling) | - |
| Features (10) | - | Overhead winch with cable and hook plus remote control; variable speed drive with a 1361 kg (3,000 lb) rating | - |
| Features (11) | - | Variable grip hydraulic break out wrench grip range 101-152 mm (4.0-6.0 in) | - |
| Features (12) | - | Closed circuit camera mounted in mast to view pipe carousel/top drive operation | - |
| Features (13) | - | Pipe positioner for angle drilling, multi-pass pipe handling | - |
| Features (14) | - | Manual pipe catcher: One (1) wire rope, pipe catcher, pipe positioner, optional manual bit basket | - |
Weights |
|||
| Working Weight Range | - | 40 823 - 45 359 kg (90,000 - 100,000 lb) | - |
Add a Similar Product:
-
MD6250 Rotary Blasthole Drill Specifications Add