Compare Equipment Go Back
 MD6250 Rotary Blasthole Drill Specifications |
 MD6310 Rotary Blasthole Drill 13.7 m or 17.5 m (44.9 ft or 57.4 ft) Mast Configuration |
|
|
Pull-Down/Hoisting Capacity |
|||
|---|---|---|---|
| Pull-Down Capacity | Up to 20 411 kg (45,000 lb) | Up to 39 009 kg (86,000 lb) | - |
Specifications |
|||
| Hole Diameter | 165-250 mm (6.5-9.88 in) | 229-311 mm (9-12.25 in) | - |
| Engine | Cat® C27 | Cat® C32B | - |
| Bit Load | Up to 32 655 kg (Up to 71,993 lb) | Up to 42 149 kg (Up to 92,922 lb) | - |
Engine Choices |
|||
| Components (1) | Dual starter motors | Dual starter motors | - |
| Components (2) | Ether starting aid (ether bottle supplied locally) | Scheduled oil sampling (S∙O∙SSM) ports | - |
| Features | Scheduled Oil Sampling (S·O·SSM) ports | - | - |
| Emissions: Equivalent to U.S. EPA Tier 4 Final - ISO 14396 | 872 HP | - | - |
| Emissions: Equivalent to U.S. EPA Tier 4 Final - ISO 14396 (DIN) | 884 mhp (PS) | - | - |
| Emissions: Equivalent to U.S. EPA Tier 2 - ISO 14396 (DIN) | 838 mhp (PS) | - | - |
| Emissions: Equivalent to U.S. EPA Tier 2 - ISO 14396 | 826 HP | - | - |
| Emissions: Equivalent to U.S. EPA Tier 2 - Engine Power | C27 @ 1,800 rpm | - | - |
| Emissions: Equivalent to U.S. EPA Tier 4 Final - Engine Power | C27 @ 1,800 rpm | - | - |
| Components (4) | - | Ether starting aid; ether bottle supplied locally | - |
| Components (3) | - | Common air intake filters provide +500 hour service interval in normal operating conditions | - |
Cooling |
|||
| Components (1) | Coolers with easy cleaning access | Coolers with easy cleaning access | - |
| Components (2) | Separate engine cooling module | Separate engine cooling module | - |
| Components (3) | All cooler core sections are replaceable | Replaceable cooler core sections | - |
| Components (4) | Automatic variable speed fan control | Automatic variable speed fan control | - |
| Features | Functional in ambient temperature of 52° C (125° F) | Functional in ambient temperature of 52° C (125° F) | - |
Climate Choices |
|||
| Climate Level 1 Standard Fluids and Lubricants (1) | Rated down to –1° C (30° F) | Rated down to –1° C (30° F) temperatures | - |
| Climate Level 1 Standard Fluids and Lubricants (2) | Withstands high heat to 52° C (125° F) | Withstands high heat to 52° C (125° F) | - |
| Climate Level 2 Arctic Fluids and Lubricants | Rated down to –18° C (–0.4° F) | Rated down to –18° C (–0.4° F) temperatures | - |
| Climate Level 4 Arctic Fluids and Lubricants (1) | Rated down to –40° C (–40° F) | - | - |
| Climate Level 4 Arctic Fluids and Lubricants (2) | Diesel fired heating system that heats and circulates engine coolant through engine block, below deck water tank, heating elements for battery trays | - | - |
| Climate Level 4 Arctic Fluids and Lubricants (3) | Full Arctic lubricant package to include engine and hydraulic oil | - | - |
| Climate Level 4 Arctic Fluids and Lubricants (4) | Electric heating package with breaker panel to power: 120V heating blanket for compressor receiver tank, heat trace for hosing from water tank to water pump and water fast-fill assembly, plus primary tank | - | - |
| Climate Level 4 Arctic Fluids and Lubricants (5) | Shore power connection box with switchable 240-600V (50 amp) connection (diesel gen set and/or plug supplied locally). Box includes standard 50 hz battery charger, if 60 hz charger required, to be ordered via after market, refer to P-n 540-4271 | - | - |
| Climate Level 4 Arctic fluids and lubricants (6) | Breaker panel includes five (5) additional breakers for locally supplied heating elements if needed | - | - |
| Batteries, Sealed (1) | Quantity: Four (4) | - | - |
| Batteries, Sealed (2) | Quantity: Six (6) (required for cold weather Level 2 and 4 and/or semi autonomy packages) | - | - |
| Climate Level 4 Arctic Fluids and Lubricants, Heating Package (6) | - | Breaker panel includes five (5) additional breakers for locally supplied heating elements, if needed | - |
| Climate Level 4 Arctic Fluids and Lubricants, Heating Package (3) | - | Full arctic lubricant package includes: engine oil, compressor oil and hydraulic oil | - |
| Climate Level 4 Arctic Fluids and Lubricants, Heating Package (1) | - | Rated down to –40° C (–40° F) temperatures | - |
| Climate Level 4 Arctic Fluids and Lubricants, Heating Package (5) | - | Shore power connection box with switchable 240-600V (50 amp) connection; diesel genset and or plug, sold separately | - |
| Climate Level 4 Arctic Fluids and Lubricants, Heating Package (2) | - | Diesel fired heating system that heats and circulates engine coolant through the: engine block, primary water tank, heating elements for battery trays with a provision for fuel tanks | - |
| Climate Level 4 Arctic Fluids and Lubricants, Heating Package (4) | - | Electric heating package with breaker panel to power: 120V heating blanket for compressor receiver tank, compressor control box, heat trace for compressor control lines, heat trace for housing from water tank to water pump and water fast-fill assembly plu | - |
Frame and Work Deck |
|||
| Features (1) | Leveling Jacks, A-frame/mast pivot and drill deck are welded integrally to mainframe for maximum durability and long life | Jacks, mast pivot and deck are welded integrally to mainframe for maximum durability and long life | - |
| Features (2) | Primary fuel tank capacity 1416 L (374 gal) | Slip resistant surface | - |
| Features (3) | Fuel capacity expansion for additional 1416 L (374 gal) optional for total capacity of 2832 L (748 gal); (required for autonomy packages) | Fuel tank capacity 1609 L (425 gal) | - |
| Features (4) | Three (3) egress points on deck areas in addition to main access | Fuel capacity expansion for additional +1609 L (425 gal) | - |
| Components (1) | Stationary drill deck; for vertical and angle drilling | Stationary rear deck; for vertical and angle drilling | - |
| Components (2) | Four leveling jacks provide leveling on a 7° bench (any orientation) | Four leveling jacks to provide leveling on a 7° bench (any orientation) | - |
| Components (3) | Heavy duty tow hooks (front end) | Manual, centralized, lubrication banks for all pivot points on drill, or automated lubrication system (option) | - |
| Components (4) | Four (4) lift lugs, for use with cables or chains | Heavy duty tow hooks (front end) | - |
| Components (5) | Fixed access stairs to the cab area | Four (4) lift lugs, for use with cables or chains | - |
| Components (6) | Sturdy guardrails with toe guards, self-closing gates | Walkway around cab to drill deck (option) | - |
| Components (7) | - | Bit storage box in-deck with hinged cover (option) | - |
| Features (6) | - | Three egress points on deck areas in addition to main access | - |
| Components (10) | - | Drill pipe thread greaser with remote fill tank or disposable grease bucket (option) | - |
| Features (7) | - | Sturdy guardrails, toe guards, self closing gates | - |
| Components (8) | - | DTH hammer storage on drill deck with high pressure configuration (option) | - |
| Features (5) | - | Bolt-on platform for cold weather generator or fire suppression bottles (option) | - |
| Components (9) | - | Hydraulically operated viewing hatch in drill deck with spotlight (option) | - |
Undercarriage |
|||
| Model | Cat® 336E EL Excavator type | Cat® 349E EL Excavator type | - |
| Carrier Rollers | Three (3) | Three (3) | - |
| Track chain guards and guides | Level two | Level two | - |
| Drawbar Pull | 93745 lbf | 122971 lbf | - |
| Triple Grousers (1) | 600 mm (23.6 in); for hard rock; 0.88 bar (12.7 psi) ground bearing pressure | - | - |
| Triple Grousers (2) | 750 mm (29.5 in); for soft rock; 1.10 bar (15.9 psi) ground bearing pressure | - | - |
| Lower rollers | Twelve (12) | Fourteen (14) | - |
| Travel Speed | 1.5 mile/h | 1.5 mile/h | - |
| Triple grousers for soft rock ground bearing pressure 1.28 bar (18.5 psi) | - | 29.5 in | - |
Hydraulics |
|||
| Components (1) | Two (2) primary pumps – 145 cc (piston, with proportional electronic controls) | Two (2) primary pumps – 210 cc (piston, with proportional electronic controls) | - |
| Components (2) | One (1) auxiliary circuit pump – 110 cc (piston, load sensing) | One (1) auxiliary circuit pump – 110 cc (piston, load sensing) | - |
| Components (3) | Two (2) fan pumps – 74 cc (piston, with proportional electronic controls) | Two (2) fan pumps – 1,000 cc (piston, with proportional electronic controls) | - |
| Components (4) | Two (2) charge pumps – 43.9 + 56.5 cc (double stack gear, fixed displacement) | Two (2) charge pumps – 43.9 + 56.5 cc (double stack gear, fixed displacement) | - |
| Components (5) | Scheduled Oil Sampling (S·O·S) ports | Scheduled Oil Sampling (S∙O∙S) ports | - |
Dimensions (Approximate) - 13.6 m (44.6 ft) Mast |
|||
| Width Non-Cab End | 15.9 ft | - | - |
| Width Cab End | 18.45 ft | - | - |
| Note | Width and length dimensions include: cascading stairs and walk-around access for cab. | - | - |
| Mast Only Shipping Length | 61.4 ft | - | - |
| Height - Mast Up | 61.13 ft | - | - |
| Body Length | 38.41 ft | - | - |
| Length - Mast Down | 66.17 ft | - | - |
| Height - Mast Down | 16.84 ft | - | - |
Hydraulic Break Out Wrench |
|||
| Variable Grip Hydraulic Break Out Wrench Grip Ranges (1) | 114-152 mm (4.5-6.0 in) | 178-219 mm (7.0-8.625 in) | - |
| Variable Grip Hydraulic Break Out Wrench Grip Ranges (2) | 152-216 mm (6.0-8.5 in) | 235 mm (9.25 in) | - |
Tool Package DTH |
|||
| Components (7) | Pipe wiper seal | - | - |
| Components (8) | Drill tool lubricator is included with selection of DTH Compressor | - | - |
| Components (1) | Two-piece roller deck bushing | Two piece bushing | - |
| Components (2) | Pipe positioner rollers | Pipe positioner inserts | - |
| Components (3) | Deck wrench | Deck wrench, sliding | - |
| Components (4) | Shock sub | Shock sub and top sub adapter | - |
| Components (5) | Top Sub | Cross over hammer adapter | - |
| Components (6) | Hammer Sub | Pipe wiper seal | - |
Safety and Security |
|||
| Feature | Approach angle of 15 degrees facilitates loading and unloading on a lowboy | Approach angle of 14 degrees facilitates loading and unloading on a lowboy | - |
| Components (13) | Lifting lugs | - | - |
| Components (1) | Alloy drill deck covers, for servicing when mast is horizontal | Alloy drill deck covers, with storage provision | - |
| Components (2) | Seven (7) engine shut down buttons, by each drill egress/access point, in cab, in engine area, on drill deck | Seven (7) engine shut down buttons: in cab, at drill deck, on deck at power train, ground accessible by main access point and each side of the drill front and left | - |
| Components (3) | Over forty (40) conditional safety interlocks | Electric horn activated by push button in the cab | - |
| Components (4) | Hinged window guard over the full length of the front drill window | Tram alarm is automatic and audible | - |
| Components (5) | Three (3) egress points on deck areas in addition to main access | Hinged protective guard for full front drill window | - |
| Components (6) | Self-closing gates secure egress ladder locations | Guards for exhaust pipes and turbo lines | - |
| Components (7) | Electric horn activated by push button in the cab | Mast access ladder with mast grating (option) | - |
| Components (8) | Automatic tram alarm, audible | Three egress points on deck areas in addition to main access | - |
| Components (9) | Under deck mounted battery box with keyed battery disconnect/starter disconnect/remote jump start terminals | Self-closing, gates secure egress ladder locations | - |
| Components (10) | Compressor air hoses with safety retention cables | In-deck mounted battery box | - |
| Components (11) | Slip resistant surfaces | Ground level keyed battery disconnect/starter lockout with remote jump start terminals | - |
| Components (12) | Tow hooks on non-drill-end | Air hose retention devices | - |
Operator Environment |
|||
| Cab - Premium | – Additional storage – Leather seat with heat and ventilation – Heavy duty seat suspension – Dual pane window glass – Removable guard for driller window, plus window facing power train – Wipers for the driller window plus front and rear win |
– Leather seat with heat and ventilation – Dual pane window glass – Front window guard – Additional in-cab storage box – Additional windshield wipers on front and rear windows – Window shades (option) – Foldaway trainer’s seat (option) | - |
| Cab - Standard | – Fabric seat – Single pane window glass – Removable guard for driller window – Wiper for the driller window |
– Fabric seat – Single pane window glass – Windshield wiper for driller window – Window shades (option) – Foldaway trainer’s seat (option) – Removable floor mat |
- |
| Cab Design | – Spacious FOPS cab is 3 m² (32.3 ft²) with an integrated operator station – Cab rubber shock-mounts – Operator station design integrates an ergonomic seat, joystick controls with full instrumentation, and dual 254 mm (10 in) color displays, high de |
- | - |
| Seating | – Seat swivels, locks and retractable, two-point/76 mm (3 in) wide seat belt, tilts (5° adjustment), lumbar support, fore/aft seat adjustment 80 mm (3.1 in) | - | - |
| Windows | – Large windows front, rear and right cab side; full length drill window with guard – Windshield wipers with a common washer tank |
- | - |
| Lighting | – LED interior lights and map light at operators seat, backlit joysticks and keypads – Flood lights for the drill perimeter – Spotlights for power group area; drill deck; mast carousel; access ladder and walkways – Lighting package includes 4,200 |
– LED interior lights; separate reading light, and backlit joysticks and keypads – Zone controls for area lights and spot lighting for night drilling – Flood lights for the drill perimeter – Spot lights for power group area; drill deck; mast caro |
- |
| HVAC | – Floor heating vent – Roof-mounted air conditioner/heating/pressurizing unit – Filter access from deck – Defogging HVAC vents on main window |
– Floor vents in the foot rest area – Roof-mounted air conditioner/heating/pressurizing unit – Filter access from deck, does not require roof access, and has approximately 500 hour service interval – Defogging HVAC vents on driller window |
- |
| Components (7) | - | Operator station design integrates an ergonomic seat, armchair joystick controls with full instrumentation, and two 254 mm (10 in) color, high definition touchscreens and 12 volt power port | - |
| Components (4) | - | Drill performance touchscreen display | - |
| Components (3) | - | Cab perimeter walkway available for both cab sizes | - |
| Components (1) | - | Spacious FOPS cab has 3 m² (32.4 ft²) floor space with an integrated operator station | - |
| Components (13) | - | Seat swivels, locks and has two point/76 mm (3 in) seat belt, tilts (5° adjustment), lumbar support, fore/aft seat adjustment 80 mm (3.1 in) | - |
| Components (9) | - | Power convertor 24V to 12V | - |
| Components (2) | - | Extended cab option 4.2 m² (45.2 ft²); prewired and dedicated space for refrigerator and microwave | - |
| Components (6) | - | Two swing-out hinged doors with windows and Cat keyed locks | - |
| Components (14) | - | Trainer’s seat that folds away and has retractable seat belt (optional) | - |
| Cameras | - | – Mounted on the front and left sides to provide 360° view from operator's seat – Camera on the mast to view pipe carousel/top drive operation |
- |
| Components (5) | - | Cab rubber shock-mounts absorb mechanical vibration and restrict exterior noise | - |
| Components (10) | - | Radio-ready for communication and entertainment radio | - |
| Components (11) | - | Cab roof access ladder (option) | - |
| Components (8) | - | Additional display screen for cc cameras; color, high-definition 254 mm (10 in) | - |
| Components (12) | - | Literature holder | - |
Operating System Controls - Standard |
|||
| Components (22) | Prewired for Terrain and autonomous operation | Prewired for Terrain and autonomous operation | - |
| Components (23) | Drill Assist automated functionality: – Auto level, auto jack retract – Auto mast raise and lock, auto mast unlock and park |
Data logging of machine health with warnings, and fault code records; export capability | - |
| Components (1) | All electric controls for drilling, tramming, leveling plus auxiliary functions | All electric controls for drilling, tramming, leveling plus auxiliary functions | - |
| Components (2) | Electronic compressor control | Electronic compressor control | - |
| Components (3) | Rotary torque control | Rotation torque control | - |
| Components (4) | Virtual rotary head travel stops and interlocks | Virtual rotary head travel stops and interlocks | - |
| Components (5) | Pipe positioner engaged/disengaged indicator | Pipe positioner engaged/disengaged indicator | - |
| Components (6) | Drill depth meter | Drill depth meter | - |
| Components (7) | Drill performance and drill health display system | Drill performance and display system | - |
| Components (8) | Data logging of machine health with warnings and fault code records with export capability | Delayed engine shut down | - |
| Components (9) | Delayed engine shut down | Rotary head rpm gauge – (digital display in screen) | - |
| Components (10) | Rotary head rpm gauge (digital display in screen) | Filter indicators for hydraulic, compressor and engine | - |
| Components (11) | Filter indicators for hydraulic, fuel, compressor and engine | Jack pressure sensors in the display | - |
| Components (12) | Jack pressure sensors in display | Dust suppression control | - |
| Components (13) | Dust suppression control | Mast lock indicator | - |
| Components (14) | Mast lock indicator | ECM controlled proportional fan speed control system | - |
| Components (15) | ECM proportional fan speed control system | Tram interlock, machine stability limits | - |
| Components (16) | Tram interlock, machine stability limits | Tram interlock, pipe in hole | - |
| Components (17) | Tram interlock, pipe in hole | Tram interlock, mast up and locked or down and parked | - |
| Components (18) | Tram interlock, mast up and locked or down and parked | Tram interlock, jacks retracted | - |
| Components (19) | Tram interlock, jack retracted | Cab environment controls (AC, filter, heat, fan speeds) | - |
| Components (20) | Tram interlock, winch parked | Cabin pressure manometer with indicator (option) | - |
| Components (21) | Cab environment controls (AC, filter, heat, fan speeds) | Dust curtain lifting system – auto hydraulic raise front and rear (option) | - |
Dimensions (Approximate) - 11.2 m (36.7 ft) Mast |
|||
| Width Non-Cab End | 15.9 ft | - | - |
| Width Cab End | 18.45 ft | - | - |
| Note | Width and length dimensions include: cascading stairs and walk-around access for cab. | - | - |
| Mast Only Shipping Length | 53.5 ft | - | - |
| Height - Mast Up | 56.3 ft | - | - |
| Body Length | 38.41 ft | - | - |
| Length - Mast Down | 58.3 ft | - | - |
| Height - Mast Down | 16.84 ft | - | - |
Compressor/Receiver Choices |
|||
| Receiver Tank Choice (1) | Low pressure 8.6 bar (125 psi) for ASME/CRN/AU or CE | Low pressure 8.6 bar (125 psi) for ASME/CR N/AU or CE | - |
| Receiver Tank Choice (2) | High pressure 24.1 or 34.4 bar (350 or 500 psi) for ASME/CRN/AU or CE | High pressure 34.4 bar (500 psi) for ASME/CR N/AU or CE | - |
| Compressor - Rotary Drilling | 56.6 m³/min (2,000 ft³/min) @ 8.6 bar (125 psi) | - | - |
| Compressor - DTH Drilling (1) | 38.2 m³/min (1,350 ft³/min) @ 34.4 bar (500 psi) | - | - |
| Compressor - DTH Drilling (2) | 42.4 m³/min (1,500 ft³/min) @ 24.1 bar (350 psi) | - | - |
| Features (1) | With the compressor’s variable volume control, the operator can limit air output resulting in reduced fuel consumption | - | - |
| Features (2) | Electronic compressor control and regulation | - | - |
| Features (3) | DTH selection includes tool oiler | - | - |
| Rotary Drilling (2) | - | 73.6 m³/min (2,600 ft³/min) @ 7.6 bar (110 psi) | - |
| Rotary Drilling (1) | - | 56.6 m³/min (2,000 ft³/min) @ 8.6 bar (125 psi) | - |
| DTH Drilling - Includes Tool Lubrication and Hammer Storage | - | 42.2 m³/min (1,500 ft³/min) @ 34.4 bar (500 psi) | - |
| Note | - | With the compressors variable volume control, the operator can limit air output resulting in reduced fuel consumption – Both high and low pressure compressors contain this feature |
- |
| Choice | - | Electronic compressor control and regulation with purged air lines | - |
Mast Packages |
|||
| Angle Drilling | Included with either mast | Included with either mast | - |
| Mast Accessories Manual - 11.2 m (36.7 ft) or 13.6 m (44.6 ft) Mast | One (1) wire rope pipe catcher, manual bit basket | - | - |
| Mast Accessories Hydraulic - 11.2 m (36.7 ft) Mast | One (1) hydraulically actuated pipe catcher, hydraulically operated bit basket | - | - |
| Mast Accessories Hydraulic - 13.6 m (44.6 ft) Mast | One (1) hydraulically actuated pipe catcher, plus one (1) wire rope pipe catcher, hydraulically operated bit basket | - | - |
| Mast Accessories Hydraulic (2) | - | One hydraulic pipe catcher, plus one wire rope, hydraulically actuated pipe positioner, hydraulic bit basket | - |
| Mast Accessories Hydraulic (1) | - | One hydraulic pipe catcher, hydraulically actuated pipe positioner, hydraulic bit basket | - |
| Mast Accessories Manual, 17.5 m (57.4 ft) Mast | - | Two wire rope pipe catchers, hydraulically actuated pipe positioner, manual bit basket | - |
| Mast Accessories Manual, 13.7 m (44.9 ft) Mast | - | One wire rope pipe catcher, hydraulically actuated pipe positioner, manual bit basket | - |
Service Tool Options |
|||
| Lifting Bails (Available on Request) | – API thread 89 mm (3.5 in) – to lift corresponding drill tools (6.75 in tricone bits or 6-inch class DTH hammers) – API thread 114 mm (4.5 in) – to lift corresponding drill tooling (7.875 and 9.0 in tricone bits or 8-inch class DTH hammers) – API t |
– 114 mm (4.5 in) API reg thread – 140 mm (5.5 in) API reg thread – 168 mm (6.625 in) for top sub/shock sub API thread – 114 mm (4.5 in) for 178 mm (7 in) pipe BECO thread – 152 mm (6 in) for 194 mm (7.625 in) up to 235 mm (9.25 in) pipe BECO |
- |
| Option | - | Bushing Retention Tool 178 to 235 mm (7.00 to 9.25 in) pipe diameter | - |
Drill Pipe |
|||
| 6.1 m (20 ft) Pipes for 13.6 m (44.6 ft) Mast - holds quantity of four (4) - Option 4 | 6.5 in | - | - |
| 6.1 m (20 ft) Pipes for 13.6 m (44.6 ft) Mast - holds quantity of four (4) - Option 1 | 5 in | - | - |
| 6.1 m (20 ft) Pipes for 13.6 m (44.6 ft) Mast - holds quantity of four (4) - Option 6 | 7.625 in | - | - |
| 10.6 m (35 ft) Pipes for 11.2 m (36.7 ft) Mast - holds quantity of four (4) - Option 1 | 5 in | - | - |
| 6.1 m (20 ft) Pipes for 13.6 m (44.6 ft) Mast - holds quantity of four (4) - Option 3 | 6 in | - | - |
| 10.6 m (35 ft) Pipes for 11.2 m (36.7 ft) Mast - holds quantity of four (4) - Option 6 | 7.625 in | - | - |
| 10.6 m (35 ft) Pipes for 11.2 m (36.7 ft) Mast - holds quantity of four (4) - Option 4 | 6.5 in | - | - |
| 10.6 m (35 ft) Pipes for 11.2 m (36.7 ft) Mast - holds quantity of four (4) - Option 3 | 6 in | - | - |
| 10.6 m (35 ft) Pipes for 11.2 m (36.7 ft) Mast - holds quantity of four (4) - Option 2 | 5.5 in | - | - |
| 10.6 m (35 ft) Pipes for 11.2 m (36.7 ft) Mast - holds quantity of four (4) - Option 5 | 7 in | - | - |
| 6.1 m (20 ft) Pipes for 13.6 m (44.6 ft) Mast - holds quantity of four (4) - Option 2 | 5.5 in | - | - |
| 6.1 m (20 ft) Pipes for 13.6 m (44.6 ft) Mast - holds quantity of four (4) - Option 5 | 7 in | - | - |
| 7.62 m (25 ft) pipes - pipe rack carousel holds a quantity of four or five pipes, 17.5 m (57.4 ft) Mast: Rotary (1) | - | 8 in | - |
| 7.62 m (25 ft) pipes - pipe rack carousel holds a quantity of four or five pipes, 17.5 m (57.4 ft) Mast: DTH | - | 7 in | - |
| 7.62 m (25 ft) pipes - pipe rack carousel holds a quantity of four or five pipes, 17.5 m (57.4 ft) Mast: Rotary or DTH | - | 7.625 in | - |
| 7.62 m (25 ft) pipes - pipe rack carousel holds a quantity of four or five pipes, 17.5 m (57.4 ft) Mast: Rotary (2) | - | 8.625 in | - |
| 7.62 m (25 ft) pipes - pipe rack carousel holds a quantity of four or five pipes, 17.5 m (57.4 ft) Mast: Rotary | - | 9.25 in | - |
| 12.19 m (40 ft) pipes - pipe rack carousel holds a quantity of four (4) or five (5) pipes, 13.7 m (44.9 ft) Mast: Rotary (2) | - | 8.625 in | - |
| 12.19 m (40 ft) pipes - pipe rack carousel holds a quantity of four (4) or five (5) pipes, 13.7 m (44.9 ft) Mast: Rotary (1) | - | 8 in | - |
| 12.19 m (40 ft) pipes - pipe rack carousel holds a quantity of four (4) or five (5) pipes, 13.7 m (44.9 ft) Mast: DTH | - | 7 in | - |
| 12.19 m (40 ft) pipes - pipe rack carousel holds a quantity of four (4) or five (5) pipes, 13.7 m (44.9 ft) Mast: Rotary or DTH | - | 7.625 in | - |
| Note | - | Dual purpose carousel pipe: 13.7 m (44.9 ft) Mast; holds quantity of two (2) 12.19 m (40 ft) pipes and quantity of two (2) 9.14 m (30 ft) pipes, and adapters to connect to DTH hammer and tricone bit (DTH hammer and tricone not included)
|
- |
Carousel (Mast size and pipe diameter dependent) |
|||
| Pipe rack carousel, standard: | – 11.2 m (36.7 ft) Mast: holds quantity of four (4) 10.6 m (35 ft) pipes – 13.6 m (44.6 ft) Mast: holds quantity of four (4) 6.1 m (20 ft) pipes |
- | - |
| 13.7 m (44.9 ft) Mast Carousel; holds quantity of 4 × 12.19 m (40 ft) pipes; total depth 62.5 m (204.9 ft): Pipe diameters | - | 178 mm (7 in), 194 mm (7.625 in), 203 mm (8 in), 219 mm (8.625 in) | - |
| 13.7 m (44.9 ft) Mast Carousel; holds quantity of 5 × 12.19 m (40 ft) pipes; total depth 74.6 m (244.9 ft): Pipe diameters | - | 194 mm (7.625 in), 219 mm (8.625 in) | - |
| 17.5 m (57.4 ft) Mast Carousel; holds quantity of 2 × 7.62 m (25 ft) pipes; total depth 32.7 m (107.4 ft): Pipe diameter | - | 9.25 in | - |
| 17.5 m (57.4 ft) Mast Carousel; holds quantity of 4 × 7.62 m (25 ft) pipes; total depth 48 m (157.5 ft): Pipe diameters | - | 178 mm (7 in), 194 mm (7.625 in), 203 mm (8 in), 219 mm (8.625 in) | - |
| Note | - | 13.7 m (44.9 ft) Mast Carousel, dual purpose; holds quantity of two (2) 12.19 m (40 ft) pipes and quantity of two (2) 9.14 m (30 ft) pipes, and adapters to connect to DTH hammer and tricone bit (DTH hammer and tricone not included)
|
- |
Mast and Pipe Rack Carousel Features |
|||
| Features (7) | Sliding deck wrench assembly | - | - |
| 13.6 m (44.6 ft) Mast - Hole Diameter Range: 152-250 mm (6-9.875 in) - Single-Pass Depth | 44.6 ft | - | - |
| Features (5) | Auto tensioning of pull down and hoist cables | - | - |
| 11.2 m (36.7 ft) Mast - Hoist Speed | 2.65 ft/s | - | - |
| Features (3) | Drill strings configured for bit changes (above the deck) | - | - |
| Features (1) | Mast configurations complete with pipe rack carousel and angle drilling package (vertical, out to 30 degrees in 5-degree increments) | - | - |
| Features (8) | Configured with roller deck bushing for tricone applications, two-piece deck bushing for DTH | - | - |
| Features (10) | Drill pipe positioner | - | - |
| Features (11) | Rotation gear box with single motor up to 160 rpm, up to 11 700 N∙m (8,629 lbf-ft) torque | - | - |
| Features (9) | Closed circuit camera in mast is used to view pipe rack carousel/top drive operation while racking pipes | - | - |
| Features (6) | Variable grip hydraulic break out wrench for range of pipe diameters | - | - |
| 11.2 m (36.7 ft) Mast - Hole Diameter Range: 152-250 mm (6-9.875 in) - Multi-Pass Depth | Down to 53.9 m (Down to 176.7 ft) | - | - |
| Features (4) | Single Hydraulic Cylinder and cable system for pulldown/hoist | - | - |
| Features (2) | Hydraulically actuated, self-indexing pipe rack carousel accepts pipe diameters from 127 mm (5.0 in) to 194 mm (7.625 in) | - | - |
| 13.6 m (44.6 ft) Mast - Hole Diameter Range: 152-250 mm (6-9.875 in) - Multi-Pass Depth | Down to 37.9 m (Down to 124.6 ft) | - | - |
| 13.6 m (44.6 ft) Mast - Hoist Speed | 2.16 ft/s | - | - |
| 11.2 m (36.7 ft) Mast - Bit Load (single pass) | Up to 22 321 kg (Up to 49,210 lb) | - | - |
| 11.2 m (36.7 ft) Mast - Pull-Down Capacity | Up to 20 411 kg (Up to 45,000 lb) | - | - |
| 13.6 m (44.6 ft) Mast - Bit Load (single pass) | Up to 32 655 kg (Up to 71,993 lb) | - | - |
| 13.6 m (44.6 ft) Mast - Pull-Down Capacity | Up to 29 483 kg (Up to 65,000 lb) | - | - |
| 13.6 m (44.6 ft) Mast - Hoist Capacity | Up to 16 584 kg (Up to 36,563 lb) | - | - |
| 11.2 m (36.7 ft) Mast - Hoist Capacity | Up to 15 309 kg (Up to 33,750 lb) | - | - |
Tool Package Rotary |
|||
| Components (1) | One-piece roller deck bushing | Roller deck bushing | - |
| Components (2) | Pipe positioner rollers | Pipe positioner inserts | - |
| Components (3) | Deck wrench | Deck wrench, sliding | - |
| Components (4) | Top sub | Top Sub, or Shock sub and cross over adapter (option) | - |
| Components (5) | Bit sub | Bit sub | - |
| Components (6) | Pipe wiper seal | Pipe wiper seal | - |
Rotary Head Top Drive System |
|||
| Torque - Single Motor | 8629 lb/ft | - | - |
| Rotation Speed | 0-160 rpm | - | - |
| Components (1) | Spindle – 140 mm (5.5 in) API regular thread with splined collar | Spindle with 168 mm (6.625 in) API regular thread and splined collar | - |
| Components (2) | Rotary torque control | Rotation gear box with dual motor arrangement, up to 160 rpm, and 16 000 N∙m (11,800 lbf-ft) of torque | - |
| Components (3) | Virtual rotary head travel interlocks | Rotary torque control | - |
| Components (4) | - | Virtual rotary head travel stops and interlocks | - |
Automation and Technology |
|||
| Type (1) | Cat Terrain ready | - | - |
| Type (2) | Autonomy ready | - | - |
| Components (1) | Drill depth indicator | Drill depth indicator and interlocks | - |
| Components (2) | Product Link™ Elite (hardware from factory, subscription package via dealer) | Auto level, auto retract, auto mast | - |
| Components (6) | - | Wiring for third party interface | - |
| Components (3) | - | Drill assist (single or multipass auto drill) (options) | - |
| Components (5) | - | Optional Command for Drilling enables each operator to manage more than one machine | - |
| Type | - | Autonomy ready | - |
| Optional Cat Terrain for Drills - Mining System Interface | - | – Production – Navigation |
- |
| Components (4) | - | Product Link Elite (hardware from factory, subscription package via dealer) | - |
Dust Control Choices |
|||
| Choices (1) | Water injection – tank mounted below front deck 1271 L (336 gal) – Water flow meter, volume control, tank fill level indicator |
- | - |
| Choices (2) | Water injection plus dry dust collector 127 m³/min (4,500 ft³/min) dust collector; includes standard water injection – Self-cleaning filters, dust chute with ejector |
- | - |
| Choices (3) | High volume water injection (maximum) – tanks total capacity 2786 L (736 gal) – Tank below deck (isolated for extreme cold weather) capacity 1271 L (336 gal) – Tank above deck capacity 1514 L (400 gal) |
- | - |
| Choices (4) | Static dust curtains, four sided/boxed enclosed | - | - |
Service Packages |
|||
| Package (1) | Fast fill for fuel and water, automated lubrication system | Basic/Manual – Centralized Manual Lube; Gravity Fill for fuel and water | - |
| Package (2) | Service center for lubricant drain and fill, automated lubrication system, fast fill fuel and water, blow down hose (option) | Standard – Fast Fill for fuel and water; Automatic Lubrication System | - |
| Package (3) | - | Premium – Service center for lubricant drain and fill (compressor oil, hydraulic oil, gearbox oil, engine oil, tool lubrication and grease), Automatic Lubrication System, Fast Fill for fuel and water, blowdown hose | - |
Weights |
|||
| Working Weight Range | 56 468 kg to 64 154 kg (124,490 lb to 141,436 lb) | - | - |
Dimensions (Approximate) - 17.5 m (57.4 ft) Mast |
|||
| Body Length - Standard Cab | - | 43.54 ft | - |
| Length - Mast Down - Extended Cab | - | 83.33 ft | - |
| Length - Mast Down - Standard Cab | - | 81.69 ft | - |
| Width - Front | - | 17.68 ft | - |
| Body Length - Extended Cab | - | 42.24 ft | - |
| Height - Mast Up | - | 77.99 ft | - |
| Width - Rear | - | 20.73 ft | - |
Basic Specs |
|||
| 13.7 m (44.9 ft) Mast - Hoist Speed | - | 122.7 ft/min | - |
| 17.5 m (57.4 ft) Mast - Hoist Speed | - | 122.7 ft/min | - |
| Emissions (Equivalent to Tier 2): Engine | - | C32B @ 1,800 rpm | - |
| 13.7 m (44.9 ft) Mast - Hole Diameter Range 203-311 mm (8-12.25 in) - Multi Pass Depth | - | Down to 74.6 m (Down to 244.9 ft) | - |
| 17.5 m (57.4 ft) Mast - Hole Diameter Range 203-311 mm (8-12.25 in) - Multi Pass Depth | - | Down to 47.9 m (Down to 157.4 ft) | - |
| 17.5 m (57.4 ft) Mast - Pulldown Capacity | - | Up to 39 009 kg (Up to 86,000 lb) | - |
| 17.5 m (57.4 ft) Mast - Hole Diameter Range 203-311 mm (8-12.25 in) - Single Pass Depth | - | 57.4 ft | - |
| 13.7 m (44.9 ft) Mast - Hole Diameter Range | - | 203-311 mm (8-12.25 in) | - |
| Angle Drilling | - | Vertical to 30° (in 5° increments) | - |
| 17.5 m (57.4 ft) Mast - Hole Diameter Range | - | 203-311 mm (8-12.25 in) | - |
| 17.5 m (57.4 ft) Mast - Bit Load - Single Pass | - | Up to 42 149 kg (Up to 92,922 lb) | - |
| 13.7 m (44.9 ft) Mast - Hoist Capacity | - | Up to 22 113 kg (Up to 48,750 lb) | - |
| Compressor - Rotary Drilling (1) | - | 56.6 m³/min (2,000 ft³/min) @ 8.6 bar (125 psi) | - |
| Compressor - Rotary Drilling (2) | - | 73.6 m³/min (2,600 ft³/min) @ 7.6 bar (110 psi) | - |
| 13.7 m (44.9 ft) Mast - Pulldown Capacity | - | Up to 39 009 kg (Up to 86,000 lb) | - |
| 13.7 m (44.9 ft) Mast - Hole Diameter Range 203-311 mm (8-12.25 in) - Single Pass Depth | - | 44.9 ft | - |
| Emissions (U.S. EPA Tier 4 Final): Engine | - | C32B @ 1,800 rpm | - |
| Compressor - DTH Drilling | - | 42.2 m³/min (1,500 ft³/min) @ 34.4 bar (500 psi) | - |
| 17.5 m (57.4 ft) Mast - Hoist Capacity | - | Up to 22 113 kg (Up to 48,750 lb) | - |
| 13.7 m (44.9 ft) Mast - Bit Load - Single Pass | - | Up to 41 165 kg (Up to 90,753 lb) | - |
| Emissions (U.S. EPA Tier 4 Final): Power Rating ISO 14396 | - | 1007 HP | - |
| Emissions (Equivalent to Tier 2): Power Rating ISO 14396 | - | 1031 HP | - |
Dimensions (Approximate) - 13.7 m (44.9 ft) Mast |
|||
| Body Length - Standard Cab | - | 43.54 ft | - |
| Body Length - Extended Cab | - | 42.24 ft | - |
| Width - Rear | - | 20.74 ft | - |
| Length - Mast Down - Standard Cab | - | 69.23 ft | - |
| Length - Mast Down - Extended Cab | - | 70.87 ft | - |
| Height - Mast Up | - | 65.39 ft | - |
| Width - Front | - | 17.68 ft | - |
Mast |
|||
| Note (2) | - | Configuration choices include single pass, multi pass, vertical out to 30 degree angle drilling | - |
| Features (12) | - | Pipe catcher; manual or optional hydraulically actuated | - |
| Features (4) | - | Feed system accommodates multiple pipe diameters | - |
| Note (1) | - | Hydraulic, indexing pipe carousels accept various pipe diameters | - |
| Features (13) | - | Tool oiler 113.5 L (30 gal) oil injection system (Rotary drilling only) | - |
| Features (2) | - | Pulldown/hoist system is a single cylinder | - |
| Features (1) | - | 13.7 m (44.9 ft) or 17.5 m (57.4 ft) Mast configurations complete with pipe rack carousel | - |
| Features (9) | - | Drill pipe positioner | - |
| Features (10) | - | Overhead winch with remote; variable speed drive with ≥ 1818 kg (4,000 lb) rating, length to reach 6.1 m (20 ft) past drill deck (option) | - |
| Features (3) | - | Auto tensioning of pull down and hoist cables | - |
| Features (6) | - | Sliding deck wrench assembly | - |
| Features (11) | - | Rotation Gear Box with dual motor arrangement, up to 160 rpm, and 16,000 N∙m of torque (11,800 ft-lb) | - |
| Features (15) | - | Mast access ladder and grating (option) | - |
| Features (5) | - | Variable grip hydraulic break out wrench (HOBO) for range of pipe diameters | - |
| Features (7) | - | Configured with roller deck bushing for tricone applications, two-piece deck bushing for DTH | - |
| Features (14) | - | Mast lanyard mounting provisions (option) | - |
| Features (8) | - | Angle drilling 0-30°; in 5° increments | - |
Dust Suppression Choices |
|||
| Water injection and dry dust collector (option) | - | – Water tank capacity 1514 L (400 gal) – 204 m³/min (7,200 cfm) dry dust collector – Self-cleaning filters, with auto-eject dust chute |
- |
| Water Injection - Standard | - | – Water tank capacity 1514 L (400 gal) | - |
| Choices (1) | - | Dust curtain hydraulic lifters raise front and rear dust curtains (option) (recommended with dust collector) | - |
| Choices (3) | - | Static dust curtains, four sides boxed in (standard) | - |
| High Volume Water Injection System - Not Compatible with Basic Service Package | - | – Water tanks total capacity 3785 L (1,000 gal) maximum – Primary tank above deck – 1514 L (400 gal) capacity (heated for extreme cold weather) – Secondary tank above deck – 2271 L (600 gal) capacity deck |
- |
| Choices (2) | - | Tram off spray to wet the ground around the cuttings pile (not recommended for cold weather applications) | - |
Overhead Winch System (optional) |
|||
| Cable Diameter | - | 0.5 in | - |
| Winch Reach - Past The Drill Deck | - | 20 ft | - |
| Capacity Rating | - | 4000 lb | - |
| Note | - | Variable speed control | - |
Frame Access Choices |
|||
| Choice (1) | - | Fixed access ladder to the cab area | - |
| Choice (3) | - | Cab perimeter walkway available with either choice | - |
| Choice (2) | - | Cascading, hydraulic stairs to cab area (option) – includes jack and tram interlock that activates when the stairs are down | - |
Weights - 13.7 m (44.9 ft) Mast |
|||
| Working Weight Range - Minimum/Maximum | - | 75 800/97 000 kg (167,110/213,848 lb) | - |
Weights - 17.5 m (57.4 ft) Mast |
|||
| Working Weight Range - Minimum/Maximum | - | 75 500/97 500 kg (166,449/214,950 lb) | - |
Add a Similar Product:
-
MD6200 Rotary Blasthole Drill Specifications Add