|
|
|
|
Engine - Tier 4 Final/EU Stage V |
Engine Model |
Cat C7.1 |
- |
- |
Net Power (SAE J1349:2011) |
249 HP |
- |
- |
Net Power (ISO 9249:2007) |
249 HP |
- |
- |
Emissions |
U.S. EPA Tier 4 Final/EU Stage V |
- |
- |
Rated Speed |
2200 r/min |
- |
- |
Gross Power (SAE J1995:2014) |
284 HP |
- |
- |
Engine Power (ISO 14396:2002) |
275 HP |
- |
- |
Peak Torque - 1,400 rpm |
902 lb/ft |
- |
- |
Torque Rise |
52% |
- |
- |
Bore |
4.1 in |
- |
- |
Stroke |
5.3 in |
- |
- |
Displacement |
427.8 in³ |
- |
- |
High Idle Speed |
2270 r/min |
- |
- |
Low Idle Speed |
800 r/min |
- |
- |
Maximum Altitude without Derating |
9842.5 ft |
- |
- |
Note |
Net power advertised is the power available at the engine flywheel when the engine is equipped with a fan, air cleaner, clean emissions module and alternator. |
- |
- |
Operating Specifications - Tier 4 Final/EU Stage V |
Operating Weight |
48526 lb |
- |
- |
Scoops |
Chip Scoop Doze Capacity |
37.9 yd³ |
70 yd³ |
- |
Chip Scoop Carry Capacity |
19 yd³ |
35 yd³ |
- |
Coal Scoop Carry Capacity |
- |
30 yd³ |
- |
Coal Scoop Doze Capacity |
- |
60 yd³ |
- |
Engine - Brazil Mar-1 and China Nonroad Stage III, Equivalent to Tier 3/EU Stage IIIA |
Engine Model |
Cat C7.1 |
- |
- |
Emissions |
Brazil MAR-1 and China Nonroad Stage III, equivalent to Tier 3/EU Stage IIIA |
- |
- |
Rated Speed |
2200 r/min |
- |
- |
Net Power (SAE J1349:2011) |
249 HP |
- |
- |
Gross Power (SAE J1995:2014) |
286 HP |
- |
- |
Engine Power (ISO 14396:2002) |
275 HP |
- |
- |
Peak Torque - 1,400 rpm |
749 lb/ft |
- |
- |
Torque Rise |
26% |
- |
- |
Bore |
4.1 in |
- |
- |
Stroke |
5.3 in |
- |
- |
Displacement |
427.8 in³ |
- |
- |
High Idle Speed |
2270 r/min |
- |
- |
Operating Specifications - Brazil Mar-1 and China Nonroad Stage III, Equivalent to Tier 3/EU Stage IIIA |
Operating Weight |
47887 lb |
- |
- |
Operating Specifications - Tier 4 Final/EU Stage V - Scoop |
Operating Weight |
52280 lb |
- |
- |
Operating Specifications - Brazil Mar-1 and China Nonroad Stage III, Equivalent to Tier 3/EU Stage IIIA - Scoop |
Operating Weight |
51639 lb |
- |
- |
Transmission |
Transmission Type |
Cat Planetary Power Shift |
Cat planetary power shift |
- |
Forward - 1 |
3.7 mile/h |
4.2 mile/h |
- |
Forward - 2 |
6.5 mile/h |
7.2 mile/h |
- |
Forward - 3 |
11.2 mile/h |
12.6 mile/h |
- |
Forward - 4 |
19.4 mile/h |
22 mile/h |
- |
Reverse - 1 |
4.2 mile/h |
4.2 mile/h |
- |
Reverse - 2 |
7.3 mile/h |
7.6 mile/h |
- |
Reverse - 3 |
12.8 mile/h |
13.3 mile/h |
- |
Reverse - 4 |
22.1 mile/h |
- |
- |
Direct Drive - Forward 1 |
- |
Lock-up disabled |
- |
Direct Drive - Forward 2 |
- |
7.7 mile/h |
- |
Direct Drive - Forward 3 |
- |
13.7 mile/h |
- |
Direct Drive - Forward 4 |
- |
23.9 mile/h |
- |
Direct Drive - Reverse 1 |
- |
4.5 mile/h |
- |
Direct Drive - Reverse 2 |
- |
8.1 mile/h |
- |
Direct Drive - Reverse 3 |
- |
14.3 mile/h |
- |
Drive Pumps |
- |
- |
1 |
Maximum Travel Speed - Forward |
- |
- |
5.6 mile/h |
Maximum Travel Speed - Reverse |
- |
- |
6.2 mile/h |
Track Motors |
- |
- |
2 |
Relief Valve Settings |
- |
- |
7033 psi |
Hydraulic System - Lift/Tilt |
Lift/Tilt System - Circuit |
Pilot operated LS valve with EH |
Pilot operated LS valve with EH |
- |
Lift/Tilt System |
Variable displacement piston |
Variable displacement piston |
- |
Maximum Flow at 2,200 rpm |
23.5 gal/min |
- |
- |
Relief Valve Setting - Lift/Tilt |
3190 psi |
4641 psi |
- |
Cylinders, Double Acting - Lift, Bore and Stroke |
120 mm × 915 mm (4.7 in × 36.0 in) |
139.75 mm × 1021 mm (5.5 in × 40.2 in) |
- |
Cylinders, Double Acting - Left and Right Tilt, Bore and Stroke |
101.6 mm × 234 mm (4.0 in × 9.2 in) |
140 mm × 230 mm (5.5 in × 9.1 in) |
- |
Pilot System |
Open center, fixed displacement gear |
Variable displacement piston |
- |
Pilot Relief Valve Setting |
3046 psi |
580 psi |
- |
Maximum Flow at 1,900 rpm |
- |
153 gal/min |
- |
Pilot Maximum Flow |
- |
13.7 gal/min |
- |
Hydraulic System - Steering |
Steering System - Circuit |
Pilot, load sensing |
Pilot, load sensing |
- |
Steering System - Pump |
Variable displacement piston |
Piston, variable displacement |
- |
Maximum Flow at 2,200 rpm |
38.8 gal/min |
- |
- |
Relief Valve Setting - Steering |
4003 psi |
3495 psi |
- |
Total Steering Angle |
72° |
86 ° |
- |
Steering Cycle Times - High Idle |
3 s |
3.1 s |
- |
Steering Cycle Times - Low Idle |
8.2 s |
5.7 s |
- |
Maximum Flow |
- |
65.8 gal/min |
- |
Service Refill Capacities |
Fuel Tank |
132.1 gal (US) |
209.5 gal (US) |
51.5 gal (US) |
Diesel Exhaust Fluid Tank |
4.2 gal (US) |
8.7 gal (US) |
- |
Cooling Systems - Tier 4 Final/EU Stage V |
21.4 gal (US) |
- |
- |
Cooling Systems - Brazil MAR-1 and China NonroadStage III, equivalent to Tier 3/EU Stage IIIA |
19.3 gal (US) |
- |
- |
Engine Crankcase |
5.3 gal (US) |
- |
- |
Transmission |
13.2 gal (US) |
31.7 gal (US) |
- |
Differential - Final Drives - Front |
17.2 gal (US) |
49.1 gal (US) |
- |
Differential - Final Drives - Rear |
17.2 gal (US) |
49.1 gal (US) |
- |
Hydraulic System - Implement/Steering |
34.1 gal (US) |
- |
- |
Hydraulic Tank Only |
19.8 gal (US) |
- |
- |
Cooling System |
- |
31.7 gal (US) |
5 gal (US) |
Crankcase |
- |
15.9 gal (US) |
- |
Hydraulic System Factory Fill |
- |
63.4 gal (US) |
- |
Hydraulic System - Tank Only |
- |
37 gal (US) |
- |
Final Drive - Each - LGP |
- |
- |
2.6 gal (US) |
Crankcase - With Filter |
- |
- |
2.8 gal (US) |
Transmission - Hydraulic Tank |
- |
- |
23.8 gal (US) |
Final Drives - Each Side |
- |
- |
2.6 gal (US) |
Diesel Exhaust Fluid (DEF) Tank |
- |
- |
4.9 gal (US) |
Axles |
Front |
Planetary – Fixed |
Fixed |
- |
Rear |
Planetary – Oscillating |
Trunnion |
- |
Oscillation Angle |
±10° |
±13° |
- |
Braking System |
Service Brakes |
Single Disc Wet (enclosed) 4 WHL |
- |
- |
Parking Brake |
Drum and Shoe, Spring Applied, Hydraulic Released |
- |
- |
Dimensions (Approximate) |
Height to Top of Beacon |
13.1 ft |
- |
- |
Height - Top of Cab |
12.1 ft |
- |
- |
Height - Top of Exhaust Pipe |
11.3 ft |
- |
- |
Height - Top of Hood |
8.7 ft |
- |
- |
Height to Top of Radiator Guard |
8 ft |
- |
- |
Ground Clearance to Hitch |
1.4 ft |
- |
- |
Ground Clearance to Transmission Guard |
1.4 ft |
- |
- |
Ground Clearance to Bottom of Bumper |
2.3 ft |
- |
- |
Centerline of Rear Axle to Bumper |
6.5 ft |
- |
- |
Centerline of Front Axle to Hitch |
5.5 ft |
- |
- |
Wheel Base |
11 ft |
- |
- |
Width over Platform |
10.3 ft |
- |
- |
Overall Length to Front Tire |
21 ft |
- |
- |
Overall Machine Length with Straight Blade |
23.6 ft |
- |
- |
Overall Machine Length with Coal Blade |
25.5 ft |
- |
- |
Sound Performance - Tier 4 Final/EU Stage V - Standard |
Operator Sound Level (ISO 6396) |
70 dB(A) |
72 dB(A) |
- |
Machine Sound Level (ISO 6395) |
111 dB(A) |
113 dB(A) |
- |
Note (1) |
The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at the maximum engine cooling fan speed. |
- |
- |
Note (2) |
Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. |
- |
- |
Note (3) |
The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at the maximum engine cooling fan speed. |
- |
- |
Note (4) |
The operator sound pressure level uncertainty is ± 2 dB(A) |
- |
- |
Sound Performance - Tier 4 Final/EU Stage V - Suppression |
Operator Sound Level (ISO 6396) |
70 dB(A) |
72 dB(A) |
- |
Machine Sound Level (ISO 6395) |
109 dB(A) |
109 dB(A) |
- |
Note (1) |
The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at the maximum engine cooling fan speed. |
- |
- |
Note (2) |
Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. |
- |
- |
Note (3) |
The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at the maximum engine cooling fan speed. |
- |
- |
Note (4) |
The operator sound pressure level uncertainty is ± 2 dB(A). |
- |
- |
Sound Performance - Brazil Mar-1 and China Nonroad Stage III, Equivalent to Tier 3/EU Stage IIIA - Standard |
Operator Sound Level (ISO 6396) |
70 dB(A) |
- |
- |
Machine Sound Level (ISO 6395) |
112 dB(A) |
- |
- |
Note (1) |
The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at the maximum engine cooling fan speed. |
- |
- |
Note (2) |
Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. |
- |
- |
Note (3) |
The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at the maximum engine cooling fan speed. |
- |
- |
Note (4) |
The operator sound pressure level uncertainty is ± 2 dB(A). |
- |
- |
Sound Performance - Brazil Mar-1 and China Nonroad Stage III, Equivalent to Tier 3/EU Stage IIIA - Suppression |
Operator Sound Level (ISO 6396) |
70 dB(A) |
- |
- |
Machine Sound Level (ISO 6395) |
110 dB(A) |
- |
- |
Note (1) |
The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at the maximum engine cooling fan speed. |
- |
- |
Note (2) |
Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. |
- |
- |
Note (3) |
The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at the maximum engine cooling fan speed. |
- |
- |
Note (4) |
The operator sound pressure level uncertainty is ± 2 dB(A). |
- |
- |
Engine |
Engine Model |
- |
Cat® C18 |
Cat® C3.6 |
Rated Speed |
- |
1900 r/min |
- |
Peak Power Speed |
- |
1500 r/min |
- |
Gross Power - SAE J1995 |
- |
562 HP |
- |
Net Power - SAE J1349 |
- |
496 HP |
- |
Bore |
- |
5.7 in |
- |
Stroke |
- |
7.2 in |
- |
Displacement |
- |
1105 in³ |
220 in³ |
Peak Torque - 1,300 rpm |
- |
2092 lb/ft |
- |
Torque Rise |
- |
52 % |
- |
Emissions |
- |
U.S. EPA Tier 4 Final and EU Stage V emission standards or equivalent to U.S. EPA Tier 3 and U.S. EPA Tier 2. |
- |
Power - Net |
- |
- |
104 HP |
Net Power - 2,200 rpm - SAE J1349 |
- |
- |
104 HP |
Net Power - 2,200 rpm - ISO 9249/EEC 80/1269 |
- |
- |
104 HP |
Note (1) |
- |
- |
Net power is tested per ISO 9249:2007 and SAE J1349:2011 and as advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system and alternator. |
Power Train |
- |
- |
Hydrostatic |
Note (2) |
- |
- |
All non-road U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final) and Korea Tier 4 Final diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm EPA/10 ppm EU (mg/kg) sulfur or less. |
Operating Specifications |
Operating Weight |
- |
105271 lb |
- |
Blade Capacities |
- |
7.9 – 22.2 m3 (10.3 – 29.0 yd3) |
- |
Coal Scoop Operating Weight |
- |
112428 lb |
- |
Chip Scoop Operating Weight |
- |
112838 lb |
- |
Air Conditioning System |
Air Conditioning |
- |
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes. |
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes. |
Brakes |
Brakes |
- |
ISO 3450: 2011 |
- |
Dimensions |
Height - Top of Exhaust Stack |
- |
15.9 ft |
- |
Height - Top of Air Cleaner |
- |
12.8 ft |
- |
Height - Top of Hood |
- |
10.9 ft |
- |
Ground Clearance - Bumper |
- |
3.1 ft |
- |
Centerline of Rear Axle to Edge of Bumper |
- |
10.5 ft |
- |
Wheel Base |
- |
14.9 ft |
- |
Length - Front of Tire |
- |
28.4 ft |
- |
Length - Straight Blade on Ground |
- |
32.6 ft |
- |
Centerline of Front Axle to Hitch |
- |
7.5 ft |
- |
Length - Universal Blade on Ground |
- |
34.4 ft |
- |
Ground Clearance |
- |
1.7 ft |
- |
Height - Top of Cab |
- |
13.7 ft |
- |
BLADE: Blade Width - LGP |
- |
- |
126.7 in |
Track Gauge - LGP, 762 mm (30 in) |
- |
- |
73 in |
BLADE: Digging Depth - LGP |
- |
- |
23.2 in |
Track Gauge - LGP |
- |
- |
67.9 in |
BLADE: Blade Capacity (SAE) - LGP |
- |
- |
3.06 yd³ |
BLADE: Blade Width at Maximum Angle - LGP |
- |
- |
115.8 in |
BLADE: Blade Cutting Edge Angle, Adjustable - LGP |
- |
- |
52° to 58° |
Ground Clearance - LGP, 762 mm (30 in) |
- |
- |
13 in |
BLADE: Blade Height - LGP |
- |
- |
39.8 in |
BLADE: Blade Lift Height - LGP |
- |
- |
30.2 in |
Ground Clearance - LGP |
- |
- |
13 in |
Overall Length - With Blade - LGP, 762 mm (30 in) |
- |
- |
169.6 in |
Overall Length - With Blade - LGP |
- |
- |
169.6 in |
Note |
- |
- |
Abrasion Undercarriage |
BLADE: Maximum Tilt - LGP |
- |
- |
17.7 in |
BLADE: Maximum Angle (either side) - LGP |
- |
- |
25° |
BLADE: Blade Capacity (SAE) - Standard |
- |
- |
2.86 yd³ |
Track Gauge - Standard |
- |
- |
63 in |
BLADE: Digging Depth - Standard |
- |
- |
23.8 in |
BLADE: Blade Lift Height - Standard |
- |
- |
30.2 in |
Ground Clearance - Standard |
- |
- |
13 in |
Overall Length - With Blade - Standard |
- |
- |
170.7 in |
BLADE: Blade Cutting Edge Angle, Adjustable - Standard |
- |
- |
52° to 58° |
BLADE: Blade Height - Standard |
- |
- |
42.2 in |
BLADE: Maximum Tilt - Standard |
- |
- |
15.8 in |
BLADE: Blade Width - Standard |
- |
- |
109.5 in |
BLADE: Blade Width at Maximum Angle - Standard |
- |
- |
103.8 in |
BLADE: Maximum Angle (either side) - Standard |
- |
- |
25° |
Length of Basic Dozer (without blade) - Standard |
- |
- |
128.7 in |
Dozer Height - Standard |
- |
- |
109 in |
Width of Dozer (standard shoes, no blade) - LGP |
- |
- |
92.9 in |
Width of Dozer (standard shoes, no blade) - LGP, 762 mm (30 in) |
- |
- |
103.5 in |
Length of Basic Dozer (without blade) - LGP |
- |
- |
128.7 in |
Dozer Height - LGP, 762 mm (30 in) |
- |
- |
109 in |
Width of Dozer (standard shoes, no blade) - Standard |
- |
- |
83 in |
Length of Basic Dozer (without blade) - LGP, 762 mm (30 in) |
- |
- |
128.7 in |
Dozer Height - LGP |
- |
- |
109 in |
Weights |
Operating Weight |
- |
- |
20640 lb |
Operating Weight - LGP |
- |
- |
21369 lb |
Operating Weight - LGP, 762 mm/30 in |
- |
- |
21810 lb |
Note (2) |
- |
- |
For machine with ripper, add 554 kg (1,222 lb). |
Note (1) |
- |
- |
Specifications shown are for machine equipped with dozer blade, EROPS cab, back-up alarm, operator, coolant, lubricants and full fuel tank. |
Hydraulic Controls |
Pump Output |
- |
- |
17.2 gal/min |
Relief Valve Settings |
- |
- |
2988 psi |
Ripper |
Type |
- |
- |
Parallelogram |
Number of Shanks |
- |
- |
3 |
Height |
- |
- |
6.5 in |
Weight |
- |
- |
1222 lb |
Maximum Digging Depth |
- |
- |
13.3 in |
Maximum Reach - Ground Line |
- |
- |
30.2 in |
Overall Width |
- |
- |
67.3 in |
Maximum Ground Clearance Under Tip |
- |
- |
17.6 in |
Undercarriage |
Ground Pressure - LGP |
- |
- |
4.5 psi |
Track Gauge - LGP |
- |
- |
69 in |
Length - Track on Ground - LGP |
- |
- |
91 in |
Number of Shoes - Each Side - Sealed and Lubricated Track (SALT) Undercarriage |
- |
- |
40 |
Ground Pressure - LGP, 762 mm (30 in) |
- |
- |
3.9 psi |
Length - Track on Ground - LGP, 762 mm (30 in) |
- |
- |
91 in |
Shoe Width - LGP |
- |
- |
26 in |
Shoe Width - LGP, 762 mm (30 in) |
- |
- |
30 in |
Track Gauge |
- |
- |
63 in |
Number of Rollers - Each Side |
- |
- |
7 |
Track Gauge - LGP, 762 mm (30 in) |
- |
- |
73 in |
Ground Pressure |
- |
- |
5.7 psi |
Length of Track on Ground |
- |
- |
91 in |
Number of Shoes - Each Side - Abrasion Undercarriage |
- |
- |
36 |
Shoe Width - Standard |
- |
- |
20 in |
Cab |
ROPS |
- |
- |
ISO 3471:2008 |
FOPS |
- |
- |
ISO 3449:2005 Level II |
Retrieval Winch |
Maximum Line Pull - Bare Drum |
- |
- |
32150 lb |
Control |
- |
- |
Hydraulic |
Rope Diameter - Optional |
- |
- |
0.75 in |
Drum Capacity - Optional Cable |
- |
- |
195 ft |
Maximum Line Speed - Full Drum |
- |
- |
79 ft/min |
Drum Capacity - Recommended Cable |
- |
- |
277 ft |
Winch Drive |
- |
- |
Hydraulic |
Weight |
- |
- |
1747 lb |
Maximum Line Pull - Full Drum |
- |
- |
20350 lb |
Rope Diameter - Recommended |
- |
- |
0.63 in |
Maximum Line Speed - Bare Drum |
- |
- |
50 ft/min |
Speed |
- |
- |
Variable |
Winch Length |
- |
- |
35.63 in |
Drum Diameter |
- |
- |
8 in |
Overall width |
- |
- |
27.91 in |
Drum Width |
- |
- |
9.65 in |
Throat Clearance |
- |
- |
5.6 in |
High Performance Winch |
Winch length |
- |
- |
27.76 in |
Rope diameter – optional |
- |
- |
0.75 in |
Maximum line speed – bare drum |
- |
- |
131 ft/min |
Maximum line pull – bare drum |
- |
- |
40000 lb |
Weight |
- |
- |
1345 lb |
Drum capacity – optional |
- |
- |
256 ft |
Maximum line speed – full drum |
- |
- |
207 ft/min |
Rope diameter – recommended |
- |
- |
0.63 in |
Winch drive |
- |
- |
Hydrostatic |
Throat clearance |
- |
- |
6.75 in |
Drum diameter |
- |
- |
10 in |
Overall width |
- |
- |
29.2 in |
Drum width |
- |
- |
10.8 in |
Maximum line pull – full drum |
- |
- |
25000 lb |
Speed |
- |
- |
Variable |
Drum capacity – recommended cable |
- |
- |
371 ft |
Control |
- |
- |
Hydraulic |