CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    814 Wheel Dozer
    View Product
    834 Wheel Dozer
    View Product Remove
    D9 Dozer
    View Product Remove

    Engine - Tier 4 Final/EU Stage V
    Engine Model Cat C7.1 - -
    Net Power (SAE J1349:2011) 249 HP - -
    Net Power (ISO 9249:2007) 249 HP - -
    Emissions U.S. EPA Tier 4 Final/EU Stage V - -
    Rated Speed 2200 r/min - -
    Gross Power (SAE J1995:2014) 284 HP - -
    Engine Power (ISO 14396:2002) 275 HP - -
    Peak Torque - 1,400 rpm 902 lb/ft - -
    Torque Rise 52% - -
    Bore 4.1 in - -
    Stroke 5.3 in - -
    Displacement 427.8 in³ - -
    High Idle Speed 2270 r/min - -
    Low Idle Speed 800 r/min - -
    Maximum Altitude without Derating 9842.5 ft - -
    Note Net power advertised is the power available at the engine flywheel when the engine is equipped with a fan, air cleaner, clean emissions module and alternator. - -

    Operating Specifications - Tier 4 Final/EU Stage V
    Operating Weight 48526 lb - -

    Scoops
    Chip Scoop Doze Capacity 37.9 yd³ 70 yd³ -
    Chip Scoop Carry Capacity 19 yd³ 35 yd³ -
    Coal Scoop Carry Capacity - 30 yd³ -
    Coal Scoop Doze Capacity - 60 yd³ -

    Engine - Brazil Mar-1 and China Nonroad Stage III, Equivalent to Tier 3/EU Stage IIIA
    Engine Model Cat C7.1 - -
    Emissions Brazil MAR-1 and China Nonroad Stage III, equivalent to Tier 3/EU Stage IIIA - -
    Rated Speed 2200 r/min - -
    Net Power (SAE J1349:2011) 249 HP - -
    Gross Power (SAE J1995:2014) 286 HP - -
    Engine Power (ISO 14396:2002) 275 HP - -
    Peak Torque - 1,400 rpm 749 lb/ft - -
    Torque Rise 26% - -
    Bore 4.1 in - -
    Stroke 5.3 in - -
    Displacement 427.8 in³ - -
    High Idle Speed 2270 r/min - -

    Operating Specifications - Brazil Mar-1 and China Nonroad Stage III, Equivalent to Tier 3/EU Stage IIIA
    Operating Weight 47887 lb - -

    Operating Specifications - Tier 4 Final/EU Stage V - Scoop
    Operating Weight 52280 lb - -

    Operating Specifications - Brazil Mar-1 and China Nonroad Stage III, Equivalent to Tier 3/EU Stage IIIA - Scoop
    Operating Weight 51639 lb - -

    Transmission
    Transmission Type Cat Planetary Power Shift Cat planetary power shift -
    Forward - 1 3.7 mile/h 4.2 mile/h -
    Forward - 2 6.5 mile/h 7.2 mile/h -
    Forward - 3 11.2 mile/h 12.6 mile/h -
    Forward - 4 19.4 mile/h 22 mile/h -
    Reverse - 1 4.2 mile/h 4.2 mile/h -
    Reverse - 2 7.3 mile/h 7.6 mile/h -
    Reverse - 3 12.8 mile/h 13.3 mile/h -
    Reverse - 4 22.1 mile/h - -
    Direct Drive - Forward 1 - Lock-up disabled -
    Direct Drive - Forward 2 - 7.7 mile/h -
    Direct Drive - Forward 3 - 13.7 mile/h -
    Direct Drive - Forward 4 - 23.9 mile/h -
    Direct Drive - Reverse 1 - 4.5 mile/h -
    Direct Drive - Reverse 2 - 8.1 mile/h -
    Direct Drive - Reverse 3 - 14.3 mile/h -
    1.0 Forward - - 2.2 mile/h
    2.0 Forward - - 3.9 mile/h
    3.0 Forward - - 6.8 mile/h
    1.0 Reverse - - 2.7 mile/h
    2.0 Reverse - - 4.8 mile/h
    3.0 Reverse - - 8.4 mile/h
    Type - - Planetary powershift

    Hydraulic System - Lift/Tilt
    Lift/Tilt System - Circuit Pilot operated LS valve with EH Pilot operated LS valve with EH -
    Lift/Tilt System Variable displacement piston Variable displacement piston -
    Maximum Flow at 2,200 rpm 23.5 gal/min - -
    Relief Valve Setting - Lift/Tilt 3190 psi 4641 psi -
    Cylinders, Double Acting - Lift, Bore and Stroke 120 mm × 915 mm (4.7 in × 36.0 in) 139.75 mm × 1021 mm (5.5 in × 40.2 in) -
    Cylinders, Double Acting - Left and Right Tilt, Bore and Stroke 101.6 mm × 234 mm (4.0 in × 9.2 in) 140 mm × 230 mm (5.5 in × 9.1 in) -
    Pilot System Open center, fixed displacement gear Variable displacement piston -
    Pilot Relief Valve Setting 3046 psi 580 psi -
    Maximum Flow at 1,900 rpm - 153 gal/min -
    Pilot Maximum Flow - 13.7 gal/min -

    Hydraulic System - Steering
    Steering System - Circuit Pilot, load sensing Pilot, load sensing -
    Steering System - Pump Variable displacement piston Piston, variable displacement -
    Maximum Flow at 2,200 rpm 38.8 gal/min - -
    Relief Valve Setting - Steering 4003 psi 3495 psi -
    Total Steering Angle 72° 86 ° -
    Steering Cycle Times - High Idle 3 s 3.1 s -
    Steering Cycle Times - Low Idle 8.2 s 5.7 s -
    Maximum Flow - 65.8 gal/min -

    Service Refill Capacities
    Fuel Tank 132.1 gal (US) 209.5 gal (US) -
    Diesel Exhaust Fluid Tank 4.2 gal (US) 8.7 gal (US) -
    Cooling Systems - Tier 4 Final/EU Stage V 21.4 gal (US) - -
    Cooling Systems - Brazil MAR-1 and China NonroadStage III, equivalent to Tier 3/EU Stage IIIA 19.3 gal (US) - -
    Engine Crankcase 5.3 gal (US) - -
    Transmission 13.2 gal (US) 31.7 gal (US) -
    Differential - Final Drives - Front 17.2 gal (US) 49.1 gal (US) -
    Differential - Final Drives - Rear 17.2 gal (US) 49.1 gal (US) -
    Hydraulic System - Implement/Steering 34.1 gal (US) - -
    Hydraulic Tank Only 19.8 gal (US) - -
    Cooling System - 31.7 gal (US) -
    Crankcase - 15.9 gal (US) -
    Hydraulic System Factory Fill - 63.4 gal (US) -
    Hydraulic System - Tank Only - 37 gal (US) -

    Axles
    Front Planetary – Fixed Fixed -
    Rear Planetary – Oscillating Trunnion -
    Oscillation Angle ±10° ±13° -

    Braking System
    Service Brakes Single Disc Wet (enclosed) 4 WHL - -
    Parking Brake Drum and Shoe, Spring Applied, Hydraulic Released - -

    Dimensions (Approximate)
    Height to Top of Beacon 13.1 ft - -
    Height - Top of Cab 12.1 ft - -
    Height - Top of Exhaust Pipe 11.3 ft - -
    Height - Top of Hood 8.7 ft - -
    Height to Top of Radiator Guard 8 ft - -
    Ground Clearance to Hitch 1.4 ft - -
    Ground Clearance to Transmission Guard 1.4 ft - -
    Ground Clearance to Bottom of Bumper 2.3 ft - -
    Centerline of Rear Axle to Bumper 6.5 ft - -
    Centerline of Front Axle to Hitch 5.5 ft - -
    Wheel Base 11 ft - -
    Width over Platform 10.3 ft - -
    Overall Length to Front Tire 21 ft - -
    Overall Machine Length with Straight Blade 23.6 ft - -
    Overall Machine Length with Coal Blade 25.5 ft - -
    Ground Clearance* - - 18.1 in
    Track Gauge - - 88.6 in
    Width - Without Trunnions - Standard Shoe - - 113 in
    Width - Over Trunnions - - 130.3 in
    Height - FOPS Cab* - - 150.4 in
    Height - Top of Stack* - - 152.6 in
    Height - ROPS/Canopy* - - 157.5 in
    Drawbar Height (Center of Clevis)* - - 30 in
    Length - Track on Ground - - 136.6 in
    Overall Length - Basic Tractor - - 193.3 in
    Length - Basic Tractor - With Drawbar - - 206.4 in
    Length - Basic Tractor - With Winch - - 218.3 in
    Length - With SU-Blade** - - 259.9 in
    Length - With U-Blade - - 274.3 in
    Length - With Single-Shank Ripper - - 257 in
    Length - With Multi-Shank Ripper - - 257.4 in
    Overall Length - SU-Blade/SS Ripper - - 323.6 in
    Note (1) - - *Includes grouser height for total dimensions on hard surfaces.

    Sound Performance - Tier 4 Final/EU Stage V - Standard
    Operator Sound Level (ISO 6396) 70 dB(A) 72 dB(A) -
    Machine Sound Level (ISO 6395) 111 dB(A) 113 dB(A) -
    Note (1) The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at the maximum engine cooling fan speed. - -
    Note (2) Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. - -
    Note (3) The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at the maximum engine cooling fan speed. - -
    Note (4) The operator sound pressure level uncertainty is ± 2 dB(A) - -

    Sound Performance - Tier 4 Final/EU Stage V - Suppression
    Operator Sound Level (ISO 6396) 70 dB(A) 72 dB(A) -
    Machine Sound Level (ISO 6395) 109 dB(A) 109 dB(A) -
    Note (1) The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at the maximum engine cooling fan speed. - -
    Note (2) Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. - -
    Note (3) The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at the maximum engine cooling fan speed. - -
    Note (4) The operator sound pressure level uncertainty is ± 2 dB(A). - -

    Sound Performance - Brazil Mar-1 and China Nonroad Stage III, Equivalent to Tier 3/EU Stage IIIA - Standard
    Operator Sound Level (ISO 6396) 70 dB(A) - -
    Machine Sound Level (ISO 6395) 112 dB(A) - -
    Note (1) The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at the maximum engine cooling fan speed. - -
    Note (2) Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. - -
    Note (3) The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at the maximum engine cooling fan speed. - -
    Note (4) The operator sound pressure level uncertainty is ± 2 dB(A). - -

    Sound Performance - Brazil Mar-1 and China Nonroad Stage III, Equivalent to Tier 3/EU Stage IIIA - Suppression
    Operator Sound Level (ISO 6396) 70 dB(A) - -
    Machine Sound Level (ISO 6395) 110 dB(A) - -
    Note (1) The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at the maximum engine cooling fan speed. - -
    Note (2) Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. - -
    Note (3) The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at the maximum engine cooling fan speed. - -
    Note (4) The operator sound pressure level uncertainty is ± 2 dB(A). - -

    Engine
    Engine Model - Cat® C18 -
    Rated Speed - 1900 r/min -
    Peak Power Speed - 1500 r/min -
    Gross Power - SAE J1995 - 562 HP -
    Net Power - SAE J1349 - 496 HP -
    Bore - 5.7 in -
    Stroke - 7.2 in -
    Displacement - 1105 in³ -
    Peak Torque - 1,300 rpm - 2092 lb/ft -
    Torque Rise - 52 % -
    Emissions - U.S. EPA Tier 4 Final and EU Stage V emission standards or equivalent to U.S. EPA Tier 3 and U.S. EPA Tier 2. -

    Operating Specifications
    Operating Weight - 105271 lb -
    Blade Capacities - 7.9 – 22.2 m3 (10.3 – 29.0 yd3) -
    Coal Scoop Operating Weight - 112428 lb -
    Chip Scoop Operating Weight - 112838 lb -

    Air Conditioning System
    Air Conditioning - The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes. The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430) the system contains 2.1 kg of refrigerant which has a CO2 equivalent of 3.003 metric tonnes.

    Brakes
    Brakes - ISO 3450: 2011 -

    Dimensions
    Height - Top of Exhaust Stack - 15.9 ft -
    Height - Top of Air Cleaner - 12.8 ft -
    Height - Top of Hood - 10.9 ft -
    Ground Clearance - Bumper - 3.1 ft -
    Centerline of Rear Axle to Edge of Bumper - 10.5 ft -
    Wheel Base - 14.9 ft -
    Length - Front of Tire - 28.4 ft -
    Length - Straight Blade on Ground - 32.6 ft -
    Centerline of Front Axle to Hitch - 7.5 ft -
    Length - Universal Blade on Ground - 34.4 ft -
    Ground Clearance - 1.7 ft -
    Height - Top of Cab - 13.7 ft -

    Engine - U.S. EPA Tier 2/3 Equivalent
    Engine Model - - Cat® C18
    Engine Power - Net SAE J1349/ISO 9249 - - 452 HP
    Bore - - 5.7 in³
    Stroke - - 7.2 in
    Displacement - - 1106 in³
    Engine Power - Gross SAE J1995 - - 487 HP
    Engine Power - ISO 14396 - - 479 HP
    Emissions - - U.S. EPA Tier 2 or Tier 3 equivalent
    Note (1) - - All engine ratings apply at 1,750 rpm.
    Note (2) - - No derating required up to 4267 m (14,000 ft) altitude.

    Weights
    Operating Weight - - 110225 lb
    Shipping Weight - - 84373 lb
    Note (1) - - D9 Operation Weight includes hydraulic controls, blade tilt cylinder, coolant, lubricants, full fuel tank, ROPS, FOPS cab, SU Blade, Single-Shank Ripper, 610 mm (24 in) ES shoes and operator.
    Note (2) - - D9 Operation Weight includes base machine chassis with cab, pivot shaft, roller frames, track and ROPS.

    Undercarriage
    Shoe Type - - Extreme Service
    Width - Shoe - - 24 in
    Shoes/Side - - 43
    Grouser Height - - 3.3 in
    Pitch - - 9.4 in
    Ground Clearance - - 18.1 in
    Track Gauge - - 88.6 in
    Length - Track on Ground - - 136.6 in
    Ground Contact Area - - 45.6 ft²
    Track Rollers/Side - - 8
    Number of Carrier Rollers - - 1 per side (optional)

    Standards
    ROPS - - Rollover Protective Structure (ROPS) meets the following criteria ISO 3471:2008.
    FOPS - - Falling Object Protective Structure (FOPS) meets the following criteria ISO 3449:2005 LEVEL II.
    Sound - - The average dynamic spectator sound power level when ISO 6395:2008 is used to measure the value for a machine is 116 dB(A). The measurement was conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling
    Sound (1) - - The average dynamic operator sound pressure level when ISO 6396:2008 is used to measure the value for an enclosed cab is 78 dB(A). The measurement was conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine c
    Sound (2) - - Hearing protection may be needed when the machine is operated with an open operator station for extended periods, in a noisy environment, or with a cab that is not properly maintained.

    Steering and Brakes
    Steering Type - - Differential
    Brake Type - - Spring Applied Wet Disc
    Brake Diameter - - 15.5 in
    Brake Count - - 8

    Engine - U.S. EPA Tier 4 Final/EU Stage V
    Engine Model - - Cat® C18
    Bore - - 5.7 in³
    Stroke - - 7.2 in³
    Displacement - - 1106 in³
    Engine Power - Gross SAE J1995 - - 477 HP
    Engine Power - ISO 14396 - - 468 HP
    Engine Power - Net SAE J1349/ISO 9249 - - 440 HP
    Emissions - - U.S. EPA Tier 4 / EU Stage V
    Note (1) - - All Engine ratings apply at 1,750 rpm.
    Note (2) - - No derating required up to 2499 m (8,200 ft).

    FLUID CAPACITIES
    Fuel Tank (Splash Fill) - - 254 gal (US)
    DEF Tank (Tier 4 only) - - 9.5 gal (US)
    Fuel Tank (Fast Fill) - - 248 gal (US)
    Cooling System - - 21 gal (US)
    Engine Crankcase* - - 10 gal (US)
    Powertrain - - 40 gal (US)
    Final Drives (each) - - 4 gal (US)
    Roller Frames (each) - - 12 gal (US)
    Pivot Shaft Oil - - 8 gal (US)
    Hydraulic System Tank - - 24 gal (US)
    Note - - *With oil filters.
    Note 2 - - Biodiesel blends up to B20 (20% blend by volume) are acceptable when blended with 15 ppm (mg/kg) sulfur or less ULSD. B20 should meet ASTM D7467 specification (biodiesel blend stock should meet Cat biodiesel spec, ASTM D6751 or EN 14214). Cat DEO-ULSTM or
    Note 3 - - All non-road Tier 4 Final diesel engines are required to use only ultra-low sulfur diesel (ULSD) fuels containing 15 ppm (mg/kg) sulfur or less.
    Note 4 - - Diesel Exhaust Fluid (DEF) used in Cat Selective Catalytic Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241.

    Hydraulic Controls
    Pump Type - - Piston-type geared to flywheel
    Pump Output - Steering - - 96 gal/min
    Fan Pump - - 21 gal/min
    Tilt Cylinder Flow - Rod End Flow - - 53 gal/min
    Tilt Cylinder Flow - Head End Flow - - 53 gal/min
    Lift Cylinder Relief Valve Setting - - 3800 lbf/in
    Tilt Cylinder Relief Valve Setting - - 2799 psi
    Ripper - Lift - Relief Valve Setting - - 3800 psi
    Ripper - Pitch - Relief Valve Setting - - 3800 psi
    Steering System - Pressure - - 5874 psi
    Tank Capacity - - 24 gal/min
    Note (1) - - Steering pump output measured at 1,750 engine rpm and 30 000 kPa (4,350 psi).
    Note (2) - - Implement pump output measured at 1,750 engine rpm and 20 000 kPa (2,900 psi).
    Note (3) - - Fan pump output measured at 1,750 engine rpm and 17 000 kPa (2,470 psi)

    Blade - Semi-Universal
    Blade Capacity (SAE J1265) - - 17.8 yd³
    Blade Width (over end bits) - - 171.3 in
    Blade Height - - 76.1 in
    Maximum Digging Depth - - 23.9 in
    Ground Clearance at Full Lift - - 56 in
    Maximum Tilt - - 37 in
    Blade Weight - - 10587 lb
    Total Operating Weight* (with blade and single-shank ripper) - - 110205 lb
    Note - - * Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes and the noted blade and ripper type.

    Blade - Universal
    Blade Capacity (SAE J1265) - - 21.7 yd³
    Blade Width (over end bits) - - 184.3 in
    Blade Height - - 76.1 in
    Maximum Digging Depth - - 23.9 in
    Ground Clearance at Full Lift - - 56 in
    Maximum Tilt - - 39.9 in
    Blade Weight - - 12016 lb
    Total Operating Weight* (with blade and single-shank ripper) - - 111362 lb
    Note - - *Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes and the noted blade and ripper type.

    Ripper - Single Shank
    Maximum penetration force * (shank vertical) - - 35520 lbf
    Maximum penetration depth (standard tip) - - 48.5 in
    Pryout Force - - 74637 lbf
    Maximum Clearance Raised - Under Tip, Pinned in Bottom Hole - - 34.7 in
    Number of Pockets - - 1
    Weight - - 10701 lb
    Total Operating Weight* (with SU Blade and noted ripper) - - 110205 lb
    Note - - *Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes and the noted blade and ripper type.

    Ripper - Single Shank, Deep Ripping
    Maximum penetration force * (shank vertical) - - 38667 lbf
    Maximum penetration depth (standard tip) - - 68 in
    Pryout Force - - 74412 lbf
    Maximum Clearance Raised - Under Tip, Pinned in Bottom Hole - - 32.2 in
    Number of Pockets - - 1
    Weight - - 10981 lb
    Total Operating Weight* (with SU Blade and noted ripper) - - 110485 lb
    Note - - *Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes and the noted blade and ripper type.

    Ripper - Multi-Shank, Adjustable Parallelogram
    Maximum Penetration Force - Shank Vertical - - 34621 lbf
    Maximum Penetration - Standard Tip - - 31.4 in
    Pry-Out Force - Multi-Shank Ripper with One Tooth - - 81156 lbf
    Maximum Clearance Raised - Under Tip, Pinned in Bottom Hole - - 34.6 in
    Number of Pockets - - 3
    Weight - - 12136 lb
    Total Operating Weight* - With SU-Blade and Ripper - - 111739 lb
    Note - - * Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes and the noted blade and ripper type.

    Winches
    Winch Model - - PA 140VS
    Weight* - - 3950 lb
    Oil Capacity - - 4 gal (US)
    Drum Width - - 12.6 in
    Wire Cable Diameter - Recommended - - 1.13 in
    Wire Cable Diameter - Optional - - 1.25 ft
    Maximum Drum Capacity - Recommended Cable Length - - 257 in
    Maximum Drum Capacity - Optional Cable Length - - 204 ft
    Wire Cable Ferrule Size - Outside Diameter - - 2.4 in
    Wire Cable Ferrule Size - Length - - 2.8 in
    Note - - *Weight shown is base winch only. Does not include mounting arrangement, control arrangement, oil, or wire rope. With counterweight: 3700 kg (8,150 lb).
    Note (2) - - Variable speed, hydraulically driven, dual braking system, three-roller fairlead.
    Add a Similar Product: