Net power advertised is the power available at the engine flywheel when the engine is equipped with a fan, air cleaner, clean emissions module and alternator.
-
-
Operating Specifications - Tier 4 Final/EU Stage V
Operating Weight
48526 lb
-
-
Scoops
Chip Scoop Doze Capacity
37.9 yd³
-
-
Chip Scoop Carry Capacity
19 yd³
-
-
Engine - Brazil Mar-1 and China Nonroad Stage III, Equivalent to Tier 3/EU Stage IIIA
Engine Model
Cat C7.1
-
-
Emissions
Brazil MAR-1 and China Nonroad Stage III, equivalent to Tier 3/EU Stage IIIA
-
-
Rated Speed
2200 r/min
-
-
Net Power (SAE J1349:2011)
249 HP
-
-
Gross Power (SAE J1995:2014)
286 HP
-
-
Engine Power (ISO 14396:2002)
275 HP
-
-
Peak Torque - 1,400 rpm
749 lb/ft
-
-
Torque Rise
26%
-
-
Bore
4.1 in
-
-
Stroke
5.3 in
-
-
Displacement
427.8 in³
-
-
High Idle Speed
2270 r/min
-
-
Operating Specifications - Brazil Mar-1 and China Nonroad Stage III, Equivalent to Tier 3/EU Stage IIIA
Operating Weight
47887 lb
-
-
Operating Specifications - Tier 4 Final/EU Stage V - Scoop
Operating Weight
52280 lb
-
-
Operating Specifications - Brazil Mar-1 and China Nonroad Stage III, Equivalent to Tier 3/EU Stage IIIA - Scoop
Operating Weight
51639 lb
-
-
Transmission
Transmission Type
Cat Planetary Power Shift
-
-
Forward - 1
3.7 mile/h
-
-
Forward - 2
6.5 mile/h
-
-
Forward - 3
11.2 mile/h
-
-
Forward - 4
19.4 mile/h
-
-
Reverse - 1
4.2 mile/h
-
-
Reverse - 2
7.3 mile/h
-
-
Reverse - 3
12.8 mile/h
-
-
Reverse - 4
22.1 mile/h
-
-
1.0 Forward
-
2.2 mile/h
-
2.0 Forward
-
3.9 mile/h
-
3.0 Forward
-
6.8 mile/h
-
1.0 Reverse
-
2.7 mile/h
-
2.0 Reverse
-
4.8 mile/h
-
3.0 Reverse
-
8.4 mile/h
-
Type
-
Planetary powershift
-
Hydraulic System - Lift/Tilt
Lift/Tilt System - Circuit
Pilot operated LS valve with EH
-
-
Lift/Tilt System
Variable displacement piston
-
-
Maximum Flow at 2,200 rpm
23.5 gal/min
-
-
Relief Valve Setting - Lift/Tilt
3190 psi
-
-
Cylinders, Double Acting - Lift, Bore and Stroke
120 mm × 915 mm (4.7 in × 36.0 in)
-
-
Cylinders, Double Acting - Left and Right Tilt, Bore and Stroke
101.6 mm × 234 mm (4.0 in × 9.2 in)
-
-
Pilot System
Open center, fixed displacement gear
-
-
Pilot Relief Valve Setting
3046 psi
-
-
Hydraulic System - Steering
Steering System - Circuit
Pilot, load sensing
-
-
Steering System - Pump
Variable displacement piston
-
-
Maximum Flow at 2,200 rpm
38.8 gal/min
-
-
Relief Valve Setting - Steering
4003 psi
-
-
Total Steering Angle
72°
-
-
Steering Cycle Times - High Idle
3 s
-
-
Steering Cycle Times - Low Idle
8.2 s
-
-
Service Refill Capacities
Fuel Tank
132.1 gal (US)
-
-
Diesel Exhaust Fluid Tank
4.2 gal (US)
-
-
Cooling Systems - Tier 4 Final/EU Stage V
21.4 gal (US)
-
-
Cooling Systems - Brazil MAR-1 and China NonroadStage III, equivalent to Tier 3/EU Stage IIIA
19.3 gal (US)
-
-
Engine Crankcase
5.3 gal (US)
-
-
Transmission
13.2 gal (US)
-
-
Differential - Final Drives - Front
17.2 gal (US)
-
-
Differential - Final Drives - Rear
17.2 gal (US)
-
-
Hydraulic System - Implement/Steering
34.1 gal (US)
-
-
Hydraulic Tank Only
19.8 gal (US)
-
-
Axles
Front
Planetary – Fixed
-
-
Rear
Planetary – Oscillating
-
-
Oscillation Angle
±10°
-
-
Braking System
Service Brakes
Single Disc Wet (enclosed) 4 WHL
-
-
Parking Brake
Drum and Shoe, Spring Applied, Hydraulic Released
-
-
Dimensions (Approximate)
Height to Top of Beacon
13.1 ft
-
-
Height - Top of Cab
12.1 ft
-
-
Height - Top of Exhaust Pipe
11.3 ft
-
-
Height - Top of Hood
8.7 ft
-
-
Height to Top of Radiator Guard
8 ft
-
-
Ground Clearance to Hitch
1.4 ft
-
-
Ground Clearance to Transmission Guard
1.4 ft
-
-
Ground Clearance to Bottom of Bumper
2.3 ft
-
-
Centerline of Rear Axle to Bumper
6.5 ft
-
-
Centerline of Front Axle to Hitch
5.5 ft
-
-
Wheel Base
11 ft
-
-
Width over Platform
10.3 ft
-
-
Overall Length to Front Tire
21 ft
-
-
Overall Machine Length with Straight Blade
23.6 ft
-
-
Overall Machine Length with Coal Blade
25.5 ft
-
-
Ground Clearance*
-
18.1 in
-
Track Gauge
-
88.6 in
-
Width - Without Trunnions - Standard Shoe
-
113 in
-
Width - Over Trunnions
-
130.3 in
-
Height - FOPS Cab*
-
150.4 in
-
Height - Top of Stack*
-
152.6 in
-
Height - ROPS/Canopy*
-
157.5 in
-
Drawbar Height (Center of Clevis)*
-
30 in
-
Length - Track on Ground
-
136.6 in
-
Overall Length - Basic Tractor
-
193.3 in
-
Length - Basic Tractor - With Drawbar
-
206.4 in
-
Length - Basic Tractor - With Winch
-
218.3 in
-
Length - With SU-Blade**
-
259.9 in
-
Length - With U-Blade
-
274.3 in
-
Length - With Single-Shank Ripper
-
257 in
-
Length - With Multi-Shank Ripper
-
257.4 in
-
Overall Length - SU-Blade/SS Ripper
-
323.6 in
-
Note (1)
-
*Includes grouser height for total dimensions on hard surfaces.
-
Sound Performance - Tier 4 Final/EU Stage V - Standard
Operator Sound Level (ISO 6396)
70 dB(A)
-
-
Machine Sound Level (ISO 6395)
111 dB(A)
-
-
Note (1)
The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at the maximum engine cooling fan speed.
-
-
Note (2)
Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
-
-
Note (3)
The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at the maximum engine cooling fan speed.
-
-
Note (4)
The operator sound pressure level uncertainty is ± 2 dB(A)
-
-
Sound Performance - Tier 4 Final/EU Stage V - Suppression
Operator Sound Level (ISO 6396)
70 dB(A)
-
-
Machine Sound Level (ISO 6395)
109 dB(A)
-
-
Note (1)
The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at the maximum engine cooling fan speed.
-
-
Note (2)
Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
-
-
Note (3)
The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at the maximum engine cooling fan speed.
-
-
Note (4)
The operator sound pressure level uncertainty is ± 2 dB(A).
-
-
Sound Performance - Brazil Mar-1 and China Nonroad Stage III, Equivalent to Tier 3/EU Stage IIIA - Standard
Operator Sound Level (ISO 6396)
70 dB(A)
-
-
Machine Sound Level (ISO 6395)
112 dB(A)
-
-
Note (1)
The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at the maximum engine cooling fan speed.
-
-
Note (2)
Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
-
-
Note (3)
The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at the maximum engine cooling fan speed.
-
-
Note (4)
The operator sound pressure level uncertainty is ± 2 dB(A).
-
-
Sound Performance - Brazil Mar-1 and China Nonroad Stage III, Equivalent to Tier 3/EU Stage IIIA - Suppression
Operator Sound Level (ISO 6396)
70 dB(A)
-
-
Machine Sound Level (ISO 6395)
110 dB(A)
-
-
Note (1)
The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at the maximum engine cooling fan speed.
-
-
Note (2)
Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
-
-
Note (3)
The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at the maximum engine cooling fan speed.
-
-
Note (4)
The operator sound pressure level uncertainty is ± 2 dB(A).
-
-
Engine - U.S. EPA Tier 2/3 Equivalent
Engine Model
-
Cat® C18
-
Engine Power - Net SAE J1349/ISO 9249
-
452 HP
-
Bore
-
5.7 in³
-
Stroke
-
7.2 in
-
Displacement
-
1106 in³
-
Engine Power - Gross SAE J1995
-
487 HP
-
Engine Power - ISO 14396
-
479 HP
-
Emissions
-
U.S. EPA Tier 2 or Tier 3 equivalent
-
Note (1)
-
All engine ratings apply at 1,750 rpm.
-
Note (2)
-
No derating required up to 4267 m (14,000 ft) altitude.
-
Weights
Operating Weight
-
110225 lb
-
Shipping Weight
-
84373 lb
-
Note (1)
-
D9 Operation Weight includes hydraulic controls, blade tilt cylinder, coolant, lubricants, full fuel tank, ROPS, FOPS cab, SU Blade, Single-Shank Ripper, 610 mm (24 in) ES shoes and operator.
-
Note (2)
-
D9 Operation Weight includes base machine chassis with cab, pivot shaft, roller frames, track and ROPS.
-
Undercarriage
Shoe Type
-
Extreme Service
-
Width - Shoe
-
24 in
-
Shoes/Side
-
43
-
Grouser Height
-
3.3 in
-
Pitch
-
9.4 in
-
Ground Clearance
-
18.1 in
-
Track Gauge
-
88.6 in
-
Length - Track on Ground
-
136.6 in
-
Ground Contact Area
-
45.6 ft²
-
Track Rollers/Side
-
8
-
Number of Carrier Rollers
-
1 per side (optional)
-
Standards
ROPS
-
Rollover Protective Structure (ROPS) meets the following criteria ISO 3471:2008.
-
FOPS
-
Falling Object Protective Structure (FOPS) meets the following criteria ISO 3449:2005 LEVEL II.
-
Sound
-
The average dynamic spectator sound power level when ISO 6395:2008 is used to measure the value for a machine is 116 dB(A). The measurement was conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling
-
Sound (1)
-
The average dynamic operator sound pressure level when ISO 6396:2008 is used to measure the value for an enclosed cab is 78 dB(A). The measurement was conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine c
-
Sound (2)
-
Hearing protection may be needed when the machine is operated with an open operator station for extended periods, in a noisy environment, or with a cab that is not properly maintained.
-
Steering and Brakes
Steering Type
-
Differential
-
Brake Type
-
Spring Applied Wet Disc
-
Brake Diameter
-
15.5 in
-
Brake Count
-
8
-
Engine - U.S. EPA Tier 4 Final/EU Stage V
Engine Model
-
Cat® C18
-
Bore
-
5.7 in³
-
Stroke
-
7.2 in³
-
Displacement
-
1106 in³
-
Engine Power - Gross SAE J1995
-
477 HP
-
Engine Power - ISO 14396
-
468 HP
-
Engine Power - Net SAE J1349/ISO 9249
-
440 HP
-
Emissions
-
U.S. EPA Tier 4 / EU Stage V
-
Note (1)
-
All Engine ratings apply at 1,750 rpm.
-
Note (2)
-
No derating required up to 2499 m (8,200 ft).
-
FLUID CAPACITIES
Fuel Tank (Splash Fill)
-
254 gal (US)
-
DEF Tank (Tier 4 only)
-
9.5 gal (US)
-
Fuel Tank (Fast Fill)
-
248 gal (US)
-
Cooling System
-
21 gal (US)
-
Engine Crankcase*
-
10 gal (US)
-
Powertrain
-
40 gal (US)
-
Final Drives (each)
-
4 gal (US)
-
Roller Frames (each)
-
12 gal (US)
-
Pivot Shaft Oil
-
8 gal (US)
-
Hydraulic System Tank
-
24 gal (US)
-
Note
-
*With oil filters.
-
Note 2
-
Biodiesel blends up to B20 (20% blend by volume) are acceptable when blended with 15 ppm (mg/kg) sulfur or less ULSD. B20 should meet ASTM D7467 specification (biodiesel blend stock should meet Cat biodiesel spec, ASTM D6751 or EN 14214). Cat DEO-ULSTM or
-
Note 3
-
All non-road Tier 4 Final diesel engines are required to use only ultra-low sulfur diesel (ULSD) fuels containing 15 ppm (mg/kg) sulfur or less.
-
Note 4
-
Diesel Exhaust Fluid (DEF) used in Cat Selective Catalytic Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241.
-
Hydraulic Controls
Pump Type
-
Piston-type geared to flywheel
-
Pump Output - Steering
-
96 gal/min
-
Fan Pump
-
21 gal/min
-
Tilt Cylinder Flow - Rod End Flow
-
53 gal/min
-
Tilt Cylinder Flow - Head End Flow
-
53 gal/min
-
Lift Cylinder Relief Valve Setting
-
3800 lbf/in
-
Tilt Cylinder Relief Valve Setting
-
2799 psi
-
Ripper - Lift - Relief Valve Setting
-
3800 psi
-
Ripper - Pitch - Relief Valve Setting
-
3800 psi
-
Steering System - Pressure
-
5874 psi
-
Tank Capacity
-
24 gal/min
-
Note (1)
-
Steering pump output measured at 1,750 engine rpm and 30 000 kPa (4,350 psi).
-
Note (2)
-
Implement pump output measured at 1,750 engine rpm and 20 000 kPa (2,900 psi).
-
Note (3)
-
Fan pump output measured at 1,750 engine rpm and 17 000 kPa (2,470 psi)
-
Air Conditioning System
Air Conditioning
-
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430) the system contains 2.1 kg of refrigerant which has a CO2 equivalent of 3.003 metric tonnes.
-
Blade - Semi-Universal
Blade Capacity (SAE J1265)
-
17.8 yd³
-
Blade Width (over end bits)
-
171.3 in
-
Blade Height
-
76.1 in
-
Maximum Digging Depth
-
23.9 in
-
Ground Clearance at Full Lift
-
56 in
-
Maximum Tilt
-
37 in
-
Blade Weight
-
10587 lb
-
Total Operating Weight* (with blade and single-shank ripper)
-
110205 lb
-
Note
-
* Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes and the noted blade and ripper type.
-
Blade - Universal
Blade Capacity (SAE J1265)
-
21.7 yd³
-
Blade Width (over end bits)
-
184.3 in
-
Blade Height
-
76.1 in
-
Maximum Digging Depth
-
23.9 in
-
Ground Clearance at Full Lift
-
56 in
-
Maximum Tilt
-
39.9 in
-
Blade Weight
-
12016 lb
-
Total Operating Weight* (with blade and single-shank ripper)
-
111362 lb
-
Note
-
*Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes and the noted blade and ripper type.
-
Ripper - Single Shank
Maximum penetration force * (shank vertical)
-
35520 lbf
-
Maximum penetration depth (standard tip)
-
48.5 in
-
Pryout Force
-
74637 lbf
-
Maximum Clearance Raised - Under Tip, Pinned in Bottom Hole
-
34.7 in
-
Number of Pockets
-
1
-
Weight
-
10701 lb
-
Total Operating Weight* (with SU Blade and noted ripper)
-
110205 lb
-
Note
-
*Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes
and the noted blade and ripper type.
-
Ripper - Single Shank, Deep Ripping
Maximum penetration force * (shank vertical)
-
38667 lbf
-
Maximum penetration depth (standard tip)
-
68 in
-
Pryout Force
-
74412 lbf
-
Maximum Clearance Raised - Under Tip, Pinned in Bottom Hole
-
32.2 in
-
Number of Pockets
-
1
-
Weight
-
10981 lb
-
Total Operating Weight* (with SU Blade and noted ripper)
-
110485 lb
-
Note
-
*Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes and the noted blade and ripper type.
-
Ripper - Multi-Shank, Adjustable Parallelogram
Maximum Penetration Force - Shank Vertical
-
34621 lbf
-
Maximum Penetration - Standard Tip
-
31.4 in
-
Pry-Out Force - Multi-Shank Ripper with One Tooth
-
81156 lbf
-
Maximum Clearance Raised - Under Tip, Pinned in Bottom Hole
-
34.6 in
-
Number of Pockets
-
3
-
Weight
-
12136 lb
-
Total Operating Weight* - With SU-Blade and Ripper
-
111739 lb
-
Note
-
* Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes and the noted blade and ripper type.
-
Winches
Winch Model
-
PA 140VS
-
Weight*
-
3950 lb
-
Oil Capacity
-
4 gal (US)
-
Drum Width
-
12.6 in
-
Wire Cable Diameter - Recommended
-
1.13 in
-
Wire Cable Diameter - Optional
-
1.25 ft
-
Maximum Drum Capacity - Recommended Cable Length
-
257 in
-
Maximum Drum Capacity - Optional Cable Length
-
204 ft
-
Wire Cable Ferrule Size - Outside Diameter
-
2.4 in
-
Wire Cable Ferrule Size - Length
-
2.8 in
-
Note
-
*Weight shown is base winch only. Does not include mounting arrangement, control arrangement, oil, or wire rope. With counterweight: 3700 kg (8,150 lb).
