Net power advertised is the power available at the engine flywheel when the engine is equipped with a fan, air cleaner, clean emissions module and alternator.
-
-
Operating Specifications - Tier 4 Final/EU Stage V
Operating Weight
48526 lb
-
-
Scoops
Chip Scoop Doze Capacity
37.9 yd³
-
-
Chip Scoop Carry Capacity
19 yd³
-
-
Engine - Brazil Mar-1 and China Nonroad Stage III, Equivalent to Tier 3/EU Stage IIIA
Engine Model
Cat C7.1
-
-
Emissions
Brazil MAR-1 and China Nonroad Stage III, equivalent to Tier 3/EU Stage IIIA
-
-
Rated Speed
2200 r/min
-
-
Net Power (SAE J1349:2011)
249 HP
-
-
Gross Power (SAE J1995:2014)
286 HP
-
-
Engine Power (ISO 14396:2002)
275 HP
-
-
Peak Torque - 1,400 rpm
749 lb/ft
-
-
Torque Rise
26%
-
-
Bore
4.1 in
-
-
Stroke
5.3 in
-
-
Displacement
427.8 in³
-
-
High Idle Speed
2270 r/min
-
-
Operating Specifications - Brazil Mar-1 and China Nonroad Stage III, Equivalent to Tier 3/EU Stage IIIA
Operating Weight
47887 lb
-
-
Operating Specifications - Tier 4 Final/EU Stage V - Scoop
Operating Weight
52280 lb
-
-
Operating Specifications - Brazil Mar-1 and China Nonroad Stage III, Equivalent to Tier 3/EU Stage IIIA - Scoop
Operating Weight
51639 lb
-
-
Transmission
Transmission Type
Cat Planetary Power Shift
-
-
Forward - 1
3.7 mile/h
-
-
Forward - 2
6.5 mile/h
-
-
Forward - 3
11.2 mile/h
-
-
Forward - 4
19.4 mile/h
-
-
Reverse - 1
4.2 mile/h
-
-
Reverse - 2
7.3 mile/h
-
-
Reverse - 3
12.8 mile/h
-
-
Reverse - 4
22.1 mile/h
-
-
1.0 Forward
-
2.5 mile/h
-
2.0 Forward
-
4.4 mile/h
-
3.0 Forward
-
7.6 mile/h
-
1.0 Reverse
-
3 mile/h
-
2.0 Reverse
-
5.3 mile/h
-
3.0 Reverse
-
9.1 mile/h
-
Drawbar Pull - 3 Forward
-
46250 ft·lbf
-
Drawbar Pull - 1 Forward
-
148200 ft·lbf
-
Drawbar Pull - 2 Forward
-
82300 ft·lbf
-
Hydraulic System - Lift/Tilt
Lift/Tilt System - Circuit
Pilot operated LS valve with EH
-
-
Lift/Tilt System
Variable displacement piston
-
-
Maximum Flow at 2,200 rpm
23.5 gal/min
-
-
Relief Valve Setting - Lift/Tilt
3190 psi
-
-
Cylinders, Double Acting - Lift, Bore and Stroke
120 mm × 915 mm (4.7 in × 36.0 in)
-
-
Cylinders, Double Acting - Left and Right Tilt, Bore and Stroke
101.6 mm × 234 mm (4.0 in × 9.2 in)
-
-
Pilot System
Open center, fixed displacement gear
-
-
Pilot Relief Valve Setting
3046 psi
-
-
Hydraulic System - Steering
Steering System - Circuit
Pilot, load sensing
-
-
Steering System - Pump
Variable displacement piston
-
-
Maximum Flow at 2,200 rpm
38.8 gal/min
-
-
Relief Valve Setting - Steering
4003 psi
-
-
Total Steering Angle
72°
-
-
Steering Cycle Times - High Idle
3 s
-
-
Steering Cycle Times - Low Idle
8.2 s
-
-
Service Refill Capacities
Fuel Tank
132.1 gal (US)
-
-
Diesel Exhaust Fluid Tank
4.2 gal (US)
-
-
Cooling Systems - Tier 4 Final/EU Stage V
21.4 gal (US)
-
-
Cooling Systems - Brazil MAR-1 and China NonroadStage III, equivalent to Tier 3/EU Stage IIIA
19.3 gal (US)
-
-
Engine Crankcase
5.3 gal (US)
35.1 gal (US)
-
Transmission
13.2 gal (US)
-
-
Differential - Final Drives - Front
17.2 gal (US)
-
-
Differential - Final Drives - Rear
17.2 gal (US)
-
-
Hydraulic System - Implement/Steering
34.1 gal (US)
-
-
Hydraulic Tank Only
19.8 gal (US)
-
-
Cooling System
-
46.8 gal (US)
-
Cooling System Refill - Tier 2 Equivalent Engine
-
41.7 gal (US)
-
Power Train
-
120 gal (US)
-
Power Train - Refill Volume
-
103.3 gal (US)
-
Final Drive - Each
-
12.4 gal (US)
-
Roller Frames - Each
-
24.8 gal (US)
-
Hydraulic Tank
-
42.2 gal (US)
-
Hydraulic System Tank and Chassis
-
64.7 gal (US)
-
Hydraulic System Chassis + Blade and Ripper (Standard)
-
117.6 gal (US)
-
Hydraulic System Chassis + Blade and Ripper (Carrydozer)
-
143.4 gal (US)
-
Axles
Front
Planetary – Fixed
-
-
Rear
Planetary – Oscillating
-
-
Oscillation Angle
±10°
-
-
Braking System
Service Brakes
Single Disc Wet (enclosed) 4 WHL
-
-
Parking Brake
Drum and Shoe, Spring Applied, Hydraulic Released
-
-
Dimensions (Approximate)
Height to Top of Beacon
13.1 ft
-
-
Height - Top of Cab
12.1 ft
-
-
Height - Top of Exhaust Pipe
11.3 ft
-
-
Height - Top of Hood
8.7 ft
-
-
Height to Top of Radiator Guard
8 ft
-
-
Ground Clearance to Hitch
1.4 ft
-
-
Ground Clearance to Transmission Guard
1.4 ft
-
-
Ground Clearance to Bottom of Bumper
2.3 ft
-
-
Centerline of Rear Axle to Bumper
6.5 ft
-
-
Centerline of Front Axle to Hitch
5.5 ft
-
-
Wheel Base
11 ft
-
-
Width over Platform
10.3 ft
-
-
Overall Length to Front Tire
21 ft
-
-
Overall Machine Length with Straight Blade
23.6 ft
-
-
Overall Machine Length with Coal Blade
25.5 ft
-
-
Sound Performance - Tier 4 Final/EU Stage V - Standard
Operator Sound Level (ISO 6396)
70 dB(A)
-
-
Machine Sound Level (ISO 6395)
111 dB(A)
-
-
Note (1)
The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at the maximum engine cooling fan speed.
-
-
Note (2)
Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
-
-
Note (3)
The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at the maximum engine cooling fan speed.
-
-
Note (4)
The operator sound pressure level uncertainty is ± 2 dB(A)
-
-
Sound Performance - Tier 4 Final/EU Stage V - Suppression
Operator Sound Level (ISO 6396)
70 dB(A)
-
-
Machine Sound Level (ISO 6395)
109 dB(A)
-
-
Note (1)
The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at the maximum engine cooling fan speed.
-
-
Note (2)
Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
-
-
Note (3)
The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at the maximum engine cooling fan speed.
-
-
Note (4)
The operator sound pressure level uncertainty is ± 2 dB(A).
-
-
Sound Performance - Brazil Mar-1 and China Nonroad Stage III, Equivalent to Tier 3/EU Stage IIIA - Standard
Operator Sound Level (ISO 6396)
70 dB(A)
-
-
Machine Sound Level (ISO 6395)
112 dB(A)
-
-
Note (1)
The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at the maximum engine cooling fan speed.
-
-
Note (2)
Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
-
-
Note (3)
The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at the maximum engine cooling fan speed.
-
-
Note (4)
The operator sound pressure level uncertainty is ± 2 dB(A).
-
-
Sound Performance - Brazil Mar-1 and China Nonroad Stage III, Equivalent to Tier 3/EU Stage IIIA - Suppression
Operator Sound Level (ISO 6396)
70 dB(A)
-
-
Machine Sound Level (ISO 6395)
110 dB(A)
-
-
Note (1)
The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at the maximum engine cooling fan speed.
-
-
Note (2)
Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
-
-
Note (3)
The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at the maximum engine cooling fan speed.
-
-
Note (4)
The operator sound pressure level uncertainty is ± 2 dB(A).
-
-
Engine - U.S. EPA Tier 4 Final/EU Stage V
Engine Model
-
Cat® C32
-
Engine Power - Net SAE J1349/ISO 9249 - Forward
-
850 HP
-
Displacement
-
1959 in³
-
Engine Power - Net SAE J1349/ISO 9249 - Reverse
-
955 HP
-
Note (1)
-
*Excludes all fan losses.
-
Note (2)
-
Engine ratings apply at 1,800 rpm.
-
Note (3)
-
Net power advertised is the power available at the flywheel when the engine is equipped with air cleaner, muffler, alternator, fan, and engine emissions controls as required.
-
Weights
Operating Weight
-
229800 lb
-
Operating Weight - Carrydozer
-
250665 lb
-
Note (1)
-
D11 Operating Weight: Includes blade tilt cylinders, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 11U ABR bulldozer, single-shank ripper with pin-puller, fast fuel, 710 mm (28 in) ES shoes, and operator.
-
Note (2)
-
D11 CD Operating Weight: Includes lubricant, coolant, full fuel tank, 915 mm (36 in) extreme service shoes, 11 Carrydozer, singleshank ripper, and operator.
Reclamation Universal - Width with blade (over end bits)
-
251.8 in
-
Carry Dozer - Blade capacity (SAE J1265)
-
57 yd³
-
Carry Dozer - Width with blade (over end bits)
-
263.9 in
-
Engine - U.S. EPA Tier 2 Equivalent
Engine Model
-
Cat® C32
-
Displacement
-
1959 in³
-
Engine Power - Net SAE J1349/ISO 9249 - Forward
-
850 HP
-
Engine Power - Net SAE J1349/ISO 9249 - Reverse
-
957 HP
-
Note (1)
-
*Excludes all fan losses.
-
Note (2)
-
Engine ratings apply at 1,800 rpm.
-
Note (3)
-
Net power advertised is the power available at the flywheel when the engine is equipped with air cleaner, muffler, alternator, fan, and engine emissions controls as required.
-
Fuel Tank Capacities
Fuel Tank - Total Volume
-
500 gal (US)
-
Fuel Tank - Usable Volume
-
475 gal (US)
-
Hydraulic Controls
Pump Type
-
Variable displacement piston pump
-
Combined Pump Output - Implement
-
177 gal/min
-
Undercarriage
Shoe Type
-
Extreme Service
-
Width - Shoe
-
28 in
-
Width - Shoe - CD
-
36 in
-
Shoes/Side
-
41
-
Grouser Height
-
4 in
-
Pitch
-
12.5 in
-
Ground Clearance*
-
30.6 in
-
Track Gauge
-
114 in
-
Length - Track on Ground
-
175 in
-
Ground Contact Area
-
9781 in²
-
Ground Contact Area - CD
-
12605 in²
-
Track Rollers/Side
-
8
-
Number of Carrier Rollers
-
1 per side (optional)
-
Ripper - Single Shank
Maximum penetration force * (shank vertical)
-
66000 lb
-
Maximum penetration depth (standard tip)
-
63.5 in
-
Pryout Force
-
148510 lb
-
Ripper - Single Shank, Deep Ripping
Maximum penetration force * (shank vertical)
-
66110 lb
-
Maximum penetration depth (standard tip)
-
85.5 in
-
Pryout Force
-
148510 lb
-
Ripper - Multi-Shank, Adjustable Parallelogram
Overall Beam Width
-
131.1 in
-
Maximum Penetration Force - Shank Vertical
-
77350 lb
-
Maximum Penetration - Standard Tip
-
43.3 in
-
Pry-Out Force - Multi-Shank Ripper with One Tooth
-
145640 lb
-
Dimensions - D11 Carrydozer
Width at Outside of Track (710 mm Track Shoe)
-
149.8 in
-
Length with SU-Blade** - No rear attachment
-
345.1 in
-
Overall Length SU-Blade and SS Ripper**
-
421.7 in
-
Standards
ROPS
-
Rollover Protective Structure (ROPS) meets the following criteria: ISO 3471:2008
-
FOPS
-
Falling Objects Protective Structure (FOPS) meets the following criteria: ISO 3449:2005 LEVEL II
-
Sound (1)
-
The exterior sound pressure level for the standard machine (ISO 6396:2008) is 116 dB(A) (sound suppressed).
-
Sound (2)
-
The operator equivalent sound pressure level (ISO 6396:2008) is 78 dB(A) (sound suppressed).
-
Dimensions - D11
Ground Clearance*
-
31.4 in
-
Track Gauge
-
114 in
-
Width at Outside of Track (710 mm Track Shoe)
-
142 in
-
Height (ROPS/canopy)*
-
185.9 in
-
Length of Track on Ground
-
175 in
-
Length with SU-Blade** - No rear attachment
-
337.8 in
-
Overall Length SU-Blade and SS Ripper**
-
414.4 in
-
Note
-
*Includes grouser height for total dimensions on hard surfaces.
-
Air Conditioning System
Note (1)
-
The air conditioning system on this machine contains the flourinated greenhouse gas refrigerant R134a (Global Warning Potential = 1430). The system contains 2.1 kg (4.6 lb) of refrigerant which has a CO2 equivalent of 3.003 metric tonnes (3.31 tons)