CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    814 Wheel Dozer
    View Product
    D7 Dozer
    View Product Remove
    D3 Track-Type Tractor
    View Product Remove

    Engine - Tier 4 Final/EU Stage V
    Engine Model Cat C7.1 - -
    Net Power (SAE J1349:2011) 249 HP - -
    Net Power (ISO 9249:2007) 249 HP - -
    Emissions U.S. EPA Tier 4 Final/EU Stage V - -
    Rated Speed 2200 r/min - -
    Gross Power (SAE J1995:2014) 284 HP - -
    Engine Power (ISO 14396:2002) 275 HP - -
    Peak Torque - 1,400 rpm 902 lb/ft - -
    Torque Rise 52% - -
    Bore 4.1 in - -
    Stroke 5.3 in - -
    Displacement 427.8 in³ - -
    High Idle Speed 2270 r/min - -
    Low Idle Speed 800 r/min - -
    Maximum Altitude without Derating 9842.5 ft - -
    Note Net power advertised is the power available at the engine flywheel when the engine is equipped with a fan, air cleaner, clean emissions module and alternator. - -

    Operating Specifications - Tier 4 Final/EU Stage V
    Operating Weight 48526 lb - -

    Scoops
    Chip Scoop Doze Capacity 37.9 yd³ - -
    Chip Scoop Carry Capacity 19 yd³ - -

    Engine - Brazil Mar-1 and China Nonroad Stage III, Equivalent to Tier 3/EU Stage IIIA
    Engine Model Cat C7.1 - -
    Emissions Brazil MAR-1 and China Nonroad Stage III, equivalent to Tier 3/EU Stage IIIA - -
    Rated Speed 2200 r/min - -
    Net Power (SAE J1349:2011) 249 HP - -
    Gross Power (SAE J1995:2014) 286 HP - -
    Engine Power (ISO 14396:2002) 275 HP - -
    Peak Torque - 1,400 rpm 749 lb/ft - -
    Torque Rise 26% - -
    Bore 4.1 in - -
    Stroke 5.3 in - -
    Displacement 427.8 in³ - -
    High Idle Speed 2270 r/min - -

    Operating Specifications - Brazil Mar-1 and China Nonroad Stage III, Equivalent to Tier 3/EU Stage IIIA
    Operating Weight 47887 lb - -

    Operating Specifications - Tier 4 Final/EU Stage V - Scoop
    Operating Weight 52280 lb - -

    Operating Specifications - Brazil Mar-1 and China Nonroad Stage III, Equivalent to Tier 3/EU Stage IIIA - Scoop
    Operating Weight 51639 lb - -

    Transmission
    Transmission Type Cat Planetary Power Shift - -
    Forward - 1 3.7 mile/h - -
    Forward - 2 6.5 mile/h - -
    Forward - 3 11.2 mile/h - -
    Forward - 4 19.4 mile/h - -
    Reverse - 1 4.2 mile/h - -
    Reverse - 2 7.3 mile/h - -
    Reverse - 3 12.8 mile/h - -
    Reverse - 4 22.1 mile/h - -
    Power Train - Fully Automatic 4-Speed -
    Drive Pumps - - 1
    Maximum Travel Speed - Forward - - 5.6 mile/h
    Maximum Travel Speed - Reverse - - 6.2 mile/h
    Track Motors - - 2
    Relief Valve Settings - - 7033 psi

    Hydraulic System - Lift/Tilt
    Lift/Tilt System - Circuit Pilot operated LS valve with EH - -
    Lift/Tilt System Variable displacement piston - -
    Maximum Flow at 2,200 rpm 23.5 gal/min - -
    Relief Valve Setting - Lift/Tilt 3190 psi - -
    Cylinders, Double Acting - Lift, Bore and Stroke 120 mm × 915 mm (4.7 in × 36.0 in) - -
    Cylinders, Double Acting - Left and Right Tilt, Bore and Stroke 101.6 mm × 234 mm (4.0 in × 9.2 in) - -
    Pilot System Open center, fixed displacement gear - -
    Pilot Relief Valve Setting 3046 psi - -

    Hydraulic System - Steering
    Steering System - Circuit Pilot, load sensing - -
    Steering System - Pump Variable displacement piston - -
    Maximum Flow at 2,200 rpm 38.8 gal/min - -
    Relief Valve Setting - Steering 4003 psi - -
    Total Steering Angle 72° - -
    Steering Cycle Times - High Idle 3 s - -
    Steering Cycle Times - Low Idle 8.2 s - -

    Service Refill Capacities
    Fuel Tank 132.1 gal (US) 123 gal (US) 51.5 gal (US)
    Diesel Exhaust Fluid Tank 4.2 gal (US) - -
    Cooling Systems - Tier 4 Final/EU Stage V 21.4 gal (US) - -
    Cooling Systems - Brazil MAR-1 and China NonroadStage III, equivalent to Tier 3/EU Stage IIIA 19.3 gal (US) - -
    Engine Crankcase 5.3 gal (US) - -
    Transmission 13.2 gal (US) - -
    Differential - Final Drives - Front 17.2 gal (US) - -
    Differential - Final Drives - Rear 17.2 gal (US) - -
    Hydraulic System - Implement/Steering 34.1 gal (US) - -
    Hydraulic Tank Only 19.8 gal (US) - -
    DEF Tank - 12 gal (US) -
    Cooling System - - 5 gal (US)
    Final Drive - Each - LGP - - 2.6 gal (US)
    Crankcase - With Filter - - 2.8 gal (US)
    Transmission - Hydraulic Tank - - 23.8 gal (US)
    Final Drives - Each Side - - 2.6 gal (US)
    Diesel Exhaust Fluid (DEF) Tank - - 4.9 gal (US)

    Axles
    Front Planetary – Fixed - -
    Rear Planetary – Oscillating - -
    Oscillation Angle ±10° - -

    Braking System
    Service Brakes Single Disc Wet (enclosed) 4 WHL - -
    Parking Brake Drum and Shoe, Spring Applied, Hydraulic Released - -

    Dimensions (Approximate)
    Height to Top of Beacon 13.1 ft - -
    Height - Top of Cab 12.1 ft - -
    Height - Top of Exhaust Pipe 11.3 ft - -
    Height - Top of Hood 8.7 ft - -
    Height to Top of Radiator Guard 8 ft - -
    Ground Clearance to Hitch 1.4 ft - -
    Ground Clearance to Transmission Guard 1.4 ft - -
    Ground Clearance to Bottom of Bumper 2.3 ft - -
    Centerline of Rear Axle to Bumper 6.5 ft - -
    Centerline of Front Axle to Hitch 5.5 ft - -
    Wheel Base 11 ft - -
    Width over Platform 10.3 ft - -
    Overall Length to Front Tire 21 ft - -
    Overall Machine Length with Straight Blade 23.6 ft - -
    Overall Machine Length with Coal Blade 25.5 ft - -

    Sound Performance - Tier 4 Final/EU Stage V - Standard
    Operator Sound Level (ISO 6396) 70 dB(A) - -
    Machine Sound Level (ISO 6395) 111 dB(A) - -
    Note (1) The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at the maximum engine cooling fan speed. - -
    Note (2) Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. - -
    Note (3) The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at the maximum engine cooling fan speed. - -
    Note (4) The operator sound pressure level uncertainty is ± 2 dB(A) - -

    Sound Performance - Tier 4 Final/EU Stage V - Suppression
    Operator Sound Level (ISO 6396) 70 dB(A) - -
    Machine Sound Level (ISO 6395) 109 dB(A) - -
    Note (1) The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at the maximum engine cooling fan speed. - -
    Note (2) Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. - -
    Note (3) The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at the maximum engine cooling fan speed. - -
    Note (4) The operator sound pressure level uncertainty is ± 2 dB(A). - -

    Sound Performance - Brazil Mar-1 and China Nonroad Stage III, Equivalent to Tier 3/EU Stage IIIA - Standard
    Operator Sound Level (ISO 6396) 70 dB(A) - -
    Machine Sound Level (ISO 6395) 112 dB(A) - -
    Note (1) The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at the maximum engine cooling fan speed. - -
    Note (2) Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. - -
    Note (3) The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at the maximum engine cooling fan speed. - -
    Note (4) The operator sound pressure level uncertainty is ± 2 dB(A). - -

    Sound Performance - Brazil Mar-1 and China Nonroad Stage III, Equivalent to Tier 3/EU Stage IIIA - Suppression
    Operator Sound Level (ISO 6396) 70 dB(A) - -
    Machine Sound Level (ISO 6395) 110 dB(A) - -
    Note (1) The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at the maximum engine cooling fan speed. - -
    Note (2) Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. - -
    Note (3) The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at the maximum engine cooling fan speed. - -
    Note (4) The operator sound pressure level uncertainty is ± 2 dB(A). - -

    Engine
    Engine Model - Cat C9.3B Cat® C3.6
    Power - Net - 265 HP 104 HP
    Net Power - Rated - ISO 9249/SAE J1349 - 265 HP -
    Net Power (Rated) - ISO 9249 (DIN) - 268 mhp -
    Emissions - U.S. EPA Tier 4 Final/EU Stage V/Japan 2014/Korea Stage V/China Nonroad Stage IV -
    Note (1) - Net power at 2,200 rpm. Net power advertised is the power available at the engine flywheel when the engine is equipped with a fan, air cleaner, clean emissions module and alternator. Advertised power is tested per the specified standard in effect at the t Net power is tested per ISO 9249:2007 and SAE J1349:2011 and as advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system and alternator.
    Note (2) - Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: 20% biodiesel FAME (fatty acid methyl ester) ** or 100% renewable diesel, HVO ( All non-road U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final) and Korea Tier 4 Final diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm EPA/10 ppm EU (mg/kg) sulfur or less.
    Note (3) - Basic machine specs provided below. For complete specifications and dimensions by configuration, blade and track shoe offerings and more, please visit the product download section to view the full Technical Specifications document. -
    Note (4) - Machine Build Number 17A -
    Displacement - - 220 in³
    Net Power - 2,200 rpm - SAE J1349 - - 104 HP
    Net Power - 2,200 rpm - ISO 9249/EEC 80/1269 - - 104 HP
    Power Train - - Hydrostatic

    Weights
    Operating Weight - 65644 lb 20640 lb
    Note (1) - Standard SU operating weight includes ripper with three shanks adding approximately 2993 kg/6596 lbs. LGP S operating weight with drawbar. Specifications shown are for machine equipped with dozer blade, EROPS cab, back-up alarm, operator, coolant, lubricants and full fuel tank.
    Operating Weight - LGP - - 21369 lb
    Operating Weight - LGP, 762 mm/30 in - - 21810 lb
    Note (2) - - For machine with ripper, add 554 kg (1,222 lb).

    Standard SU
    Operating Weight - 65644 lb -
    Ground Pressure - 10 psi -
    Width of Standard Shoe - 24 in -
    Blade - Semi-Universal (SU) -
    Blade Capacity - 10 yd³ -

    LGP S
    Operating Weight - 63220 lb -
    Ground Pressure - 6 psi -
    Width of Standard Shoe - 36 in -
    Blade - Straight (S) -
    Blade Capacity - 8 yd³ -

    Waste Handler
    Operating Weight - 62035 lb -
    Ground Pressure - 10 psi -
    Width of Standard Shoe - 24 in -
    Blade - Universal Landfill (U) -
    Blade Capacity - 22 yd³ -

    Sustainability
    Recyclability - 98% -

    Air Conditioning System
    Air Conditioning - The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.36 kg of refrigerant which has a CO2 equivalent of 1.946 metric tonnes. The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes.

    Note (2) - Configurations and features may vary by region. Please consult your Cat dealer for availability in your area. -

    Hydraulic Controls
    Pump Output - - 17.2 gal/min
    Relief Valve Settings - - 2988 psi

    Ripper
    Type - - Parallelogram
    Number of Shanks - - 3
    Height - - 6.5 in
    Weight - - 1222 lb
    Maximum Digging Depth - - 13.3 in
    Maximum Reach - Ground Line - - 30.2 in
    Overall Width - - 67.3 in
    Maximum Ground Clearance Under Tip - - 17.6 in

    Undercarriage
    Ground Pressure - LGP - - 4.5 psi
    Track Gauge - LGP - - 69 in
    Length - Track on Ground - LGP - - 91 in
    Number of Shoes - Each Side - Sealed and Lubricated Track (SALT) Undercarriage - - 40
    Ground Pressure - LGP, 762 mm (30 in) - - 3.9 psi
    Length - Track on Ground - LGP, 762 mm (30 in) - - 91 in
    Shoe Width - LGP - - 26 in
    Shoe Width - LGP, 762 mm (30 in) - - 30 in
    Track Gauge - - 63 in
    Number of Rollers - Each Side - - 7
    Track Gauge - LGP, 762 mm (30 in) - - 73 in
    Ground Pressure - - 5.7 psi
    Length of Track on Ground - - 91 in
    Number of Shoes - Each Side - Abrasion Undercarriage - - 36
    Shoe Width - Standard - - 20 in

    Dimensions
    BLADE: Blade Width - LGP - - 126.7 in
    Track Gauge - LGP, 762 mm (30 in) - - 73 in
    BLADE: Digging Depth - LGP - - 23.2 in
    Track Gauge - LGP - - 67.9 in
    BLADE: Blade Capacity (SAE) - LGP - - 3.06 yd³
    BLADE: Blade Width at Maximum Angle - LGP - - 115.8 in
    BLADE: Blade Cutting Edge Angle, Adjustable - LGP - - 52° to 58°
    Ground Clearance - LGP, 762 mm (30 in) - - 13 in
    BLADE: Blade Height - LGP - - 39.8 in
    BLADE: Blade Lift Height - LGP - - 30.2 in
    Ground Clearance - LGP - - 13 in
    Overall Length - With Blade - LGP, 762 mm (30 in) - - 169.6 in
    Overall Length - With Blade - LGP - - 169.6 in
    Note - - Abrasion Undercarriage
    BLADE: Maximum Tilt - LGP - - 17.7 in
    BLADE: Maximum Angle (either side) - LGP - - 25°
    BLADE: Blade Capacity (SAE) - Standard - - 2.86 yd³
    Track Gauge - Standard - - 63 in
    BLADE: Digging Depth - Standard - - 23.8 in
    BLADE: Blade Lift Height - Standard - - 30.2 in
    Ground Clearance - Standard - - 13 in
    Overall Length - With Blade - Standard - - 170.7 in
    BLADE: Blade Cutting Edge Angle, Adjustable - Standard - - 52° to 58°
    BLADE: Blade Height - Standard - - 42.2 in
    BLADE: Maximum Tilt - Standard - - 15.8 in
    BLADE: Blade Width - Standard - - 109.5 in
    BLADE: Blade Width at Maximum Angle - Standard - - 103.8 in
    BLADE: Maximum Angle (either side) - Standard - - 25°
    Length of Basic Dozer (without blade) - Standard - - 128.7 in
    Dozer Height - Standard - - 109 in
    Width of Dozer (standard shoes, no blade) - LGP - - 92.9 in
    Width of Dozer (standard shoes, no blade) - LGP, 762 mm (30 in) - - 103.5 in
    Length of Basic Dozer (without blade) - LGP - - 128.7 in
    Dozer Height - LGP, 762 mm (30 in) - - 109 in
    Width of Dozer (standard shoes, no blade) - Standard - - 83 in
    Length of Basic Dozer (without blade) - LGP, 762 mm (30 in) - - 128.7 in
    Dozer Height - LGP - - 109 in

    Cab
    ROPS - - ISO 3471:2008
    FOPS - - ISO 3449:2005 Level II

    Retrieval Winch
    Maximum Line Pull - Bare Drum - - 32150 lb
    Control - - Hydraulic
    Rope Diameter - Optional - - 0.75 in
    Drum Capacity - Optional Cable - - 195 ft
    Maximum Line Speed - Full Drum - - 79 ft/min
    Drum Capacity - Recommended Cable - - 277 ft
    Winch Drive - - Hydraulic
    Weight - - 1747 lb
    Maximum Line Pull - Full Drum - - 20350 lb
    Rope Diameter - Recommended - - 0.63 in
    Maximum Line Speed - Bare Drum - - 50 ft/min
    Speed - - Variable
    Winch Length - - 35.63 in
    Drum Diameter - - 8 in
    Overall width - - 27.91 in
    Drum Width - - 9.65 in
    Throat Clearance - - 5.6 in

    High Performance Winch
    Winch length - - 27.76 in
    Rope diameter – optional - - 0.75 in
    Maximum line speed – bare drum - - 131 ft/min
    Maximum line pull – bare drum - - 40000 lb
    Weight - - 1345 lb
    Drum capacity – optional - - 256 ft
    Maximum line speed – full drum - - 207 ft/min
    Rope diameter – recommended - - 0.63 in
    Winch drive - - Hydrostatic
    Throat clearance - - 6.75 in
    Drum diameter - - 10 in
    Overall width - - 29.2 in
    Drum width - - 10.8 in
    Maximum line pull – full drum - - 25000 lb
    Speed - - Variable
    Drum capacity – recommended cable - - 371 ft
    Control - - Hydraulic
    Add a Similar Product: