Net power advertised is the power available at the engine flywheel when the engine is equipped with a fan, air cleaner, clean emissions module and alternator.
-
-
Operating Specifications - Tier 4 Final/EU Stage V
Operating Weight
48526 lb
-
-
Scoops
Chip Scoop Doze Capacity
37.9 yd³
-
-
Chip Scoop Carry Capacity
19 yd³
-
-
Engine - Brazil Mar-1 and China Nonroad Stage III, Equivalent to Tier 3/EU Stage IIIA
Engine Model
Cat C7.1
-
-
Emissions
Brazil MAR-1 and China Nonroad Stage III, equivalent to Tier 3/EU Stage IIIA
-
-
Rated Speed
2200 r/min
-
-
Net Power (SAE J1349:2011)
249 HP
-
-
Gross Power (SAE J1995:2014)
286 HP
-
-
Engine Power (ISO 14396:2002)
275 HP
-
-
Peak Torque - 1,400 rpm
749 lb/ft
-
-
Torque Rise
26%
-
-
Bore
4.1 in
-
-
Stroke
5.3 in
-
-
Displacement
427.8 in³
-
-
High Idle Speed
2270 r/min
-
-
Operating Specifications - Brazil Mar-1 and China Nonroad Stage III, Equivalent to Tier 3/EU Stage IIIA
Operating Weight
47887 lb
-
-
Operating Specifications - Tier 4 Final/EU Stage V - Scoop
Operating Weight
52280 lb
-
-
Operating Specifications - Brazil Mar-1 and China Nonroad Stage III, Equivalent to Tier 3/EU Stage IIIA - Scoop
Operating Weight
51639 lb
-
-
Transmission
Transmission Type
Cat Planetary Power Shift
-
-
Forward - 1
3.7 mile/h
-
-
Forward - 2
6.5 mile/h
-
-
Forward - 3
11.2 mile/h
-
-
Forward - 4
19.4 mile/h
-
-
Reverse - 1
4.2 mile/h
-
-
Reverse - 2
7.3 mile/h
-
-
Reverse - 3
12.8 mile/h
-
-
Reverse - 4
22.1 mile/h
-
-
Power Train
-
Fully Automatic 4-Speed Powershift
-
Hydraulic System - Lift/Tilt
Lift/Tilt System - Circuit
Pilot operated LS valve with EH
-
-
Lift/Tilt System
Variable displacement piston
-
-
Maximum Flow at 2,200 rpm
23.5 gal/min
-
-
Relief Valve Setting - Lift/Tilt
3190 psi
-
-
Cylinders, Double Acting - Lift, Bore and Stroke
120 mm × 915 mm (4.7 in × 36.0 in)
-
-
Cylinders, Double Acting - Left and Right Tilt, Bore and Stroke
101.6 mm × 234 mm (4.0 in × 9.2 in)
-
-
Pilot System
Open center, fixed displacement gear
-
-
Pilot Relief Valve Setting
3046 psi
-
-
Hydraulic System - Steering
Steering System - Circuit
Pilot, load sensing
-
-
Steering System - Pump
Variable displacement piston
-
-
Maximum Flow at 2,200 rpm
38.8 gal/min
-
-
Relief Valve Setting - Steering
4003 psi
-
-
Total Steering Angle
72°
-
-
Steering Cycle Times - High Idle
3 s
-
-
Steering Cycle Times - Low Idle
8.2 s
-
-
Service Refill Capacities
Fuel Tank
132.1 gal (US)
90 gal (US)
-
Diesel Exhaust Fluid Tank
4.2 gal (US)
-
-
Cooling Systems - Tier 4 Final/EU Stage V
21.4 gal (US)
-
-
Cooling Systems - Brazil MAR-1 and China NonroadStage III, equivalent to Tier 3/EU Stage IIIA
19.3 gal (US)
-
-
Engine Crankcase
5.3 gal (US)
-
-
Transmission
13.2 gal (US)
-
-
Differential - Final Drives - Front
17.2 gal (US)
-
-
Differential - Final Drives - Rear
17.2 gal (US)
-
-
Hydraulic System - Implement/Steering
34.1 gal (US)
-
-
Hydraulic Tank Only
19.8 gal (US)
-
-
DEF Tank
-
7.4 gal (US)
-
Axles
Front
Planetary – Fixed
-
-
Rear
Planetary – Oscillating
-
-
Oscillation Angle
±10°
-
-
Braking System
Service Brakes
Single Disc Wet (enclosed) 4 WHL
-
-
Parking Brake
Drum and Shoe, Spring Applied, Hydraulic Released
-
-
Dimensions (Approximate)
Height to Top of Beacon
13.1 ft
-
-
Height - Top of Cab
12.1 ft
-
-
Height - Top of Exhaust Pipe
11.3 ft
-
-
Height - Top of Hood
8.7 ft
-
-
Height to Top of Radiator Guard
8 ft
-
-
Ground Clearance to Hitch
1.4 ft
-
-
Ground Clearance to Transmission Guard
1.4 ft
-
-
Ground Clearance to Bottom of Bumper
2.3 ft
-
-
Centerline of Rear Axle to Bumper
6.5 ft
-
-
Centerline of Front Axle to Hitch
5.5 ft
-
-
Wheel Base
11 ft
-
-
Width over Platform
10.3 ft
-
-
Overall Length to Front Tire
21 ft
-
-
Overall Machine Length with Straight Blade
23.6 ft
-
-
Overall Machine Length with Coal Blade
25.5 ft
-
-
Sound Performance - Tier 4 Final/EU Stage V - Standard
Operator Sound Level (ISO 6396)
70 dB(A)
-
-
Machine Sound Level (ISO 6395)
111 dB(A)
-
-
Note (1)
The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at the maximum engine cooling fan speed.
-
-
Note (2)
Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
-
-
Note (3)
The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at the maximum engine cooling fan speed.
-
-
Note (4)
The operator sound pressure level uncertainty is ± 2 dB(A)
-
-
Sound Performance - Tier 4 Final/EU Stage V - Suppression
Operator Sound Level (ISO 6396)
70 dB(A)
-
-
Machine Sound Level (ISO 6395)
109 dB(A)
-
-
Note (1)
The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at the maximum engine cooling fan speed.
-
-
Note (2)
Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
-
-
Note (3)
The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at the maximum engine cooling fan speed.
-
-
Note (4)
The operator sound pressure level uncertainty is ± 2 dB(A).
-
-
Sound Performance - Brazil Mar-1 and China Nonroad Stage III, Equivalent to Tier 3/EU Stage IIIA - Standard
Operator Sound Level (ISO 6396)
70 dB(A)
-
-
Machine Sound Level (ISO 6395)
112 dB(A)
-
-
Note (1)
The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at the maximum engine cooling fan speed.
-
-
Note (2)
Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
-
-
Note (3)
The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at the maximum engine cooling fan speed.
-
-
Note (4)
The operator sound pressure level uncertainty is ± 2 dB(A).
-
-
Sound Performance - Brazil Mar-1 and China Nonroad Stage III, Equivalent to Tier 3/EU Stage IIIA - Suppression
Operator Sound Level (ISO 6396)
70 dB(A)
-
-
Machine Sound Level (ISO 6395)
110 dB(A)
-
-
Note (1)
The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at the maximum engine cooling fan speed.
-
-
Note (2)
Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
-
-
Note (3)
The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at the maximum engine cooling fan speed.
-
-
Note (4)
The operator sound pressure level uncertainty is ± 2 dB(A).
-
-
Engine
Engine Model
-
Cat C9.3B
-
Power - Net
-
215 HP
-
Net Power - Rated - ISO 9249/SAE J1349
-
215 HP
-
Net Power (Rated) - ISO 9249 (DIN)
-
219 mhp
-
Emissions
-
U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V
-
Note (1)
-
Rated horsepower at 2,200 rpm. Net power advertised is the power available at the engine flywheel when the engine is equipped with a fan, air cleaner, clean emissions module and alternator. Advertised power is tested per the specified standard in effect a
-
Note (2)
-
Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: 20% biodiesel FAME (fatty acid methyl ester) ** or 100% renewable diesel, HVO (
-
Note (3)
-
Basic machine specs provided below. For complete specifications and dimensions by configuration, blade and track shoe offerings and more, please visit the product download section to view the full Technical Specifications document.
-
Note (4)
-
Machine Build Number 20B
-
Weights
Operating Weight
-
50733 lb
-
D6 Push Arm
Operating Weight
-
48788 lb
-
Ground Pressure
-
7.9 psi
-
Width of Standard Shoe
-
24 in
-
Blade
-
Semi-Universal (SU)
-
Blade Capacity
-
7.5 yd³
-
D6 LGP (30-in) Push Arm
Operating Weight
-
50420 lb
-
Ground Pressure
-
6.5 psi
-
Width of Standard Shoe
-
30 in
-
Blade
-
Semi-Universal (SU)
-
Blade Capacity
-
7.6 yd³
-
D6 LGP (36-in) Push Arm
Operating Weight
-
52715 lb
-
Ground Pressure
-
5.2 psi
-
Width of Standard Shoe
-
36 in
-
Blade
-
Straight
-
Blade Capacity
-
5 yd³
-
D6 VPAT
Operating Weight
-
49108 lb
-
Ground Pressure
-
7.1 psi
-
Width of Standard Shoe
-
24 in
-
Blade
-
VPAT
-
Blade Capacity
-
5.4 yd³
-
D6 LGP (30-in) VPAT
Operating Weight
-
50733 lb
-
Ground Pressure
-
5.9 psi
-
Width of Standard Shoe
-
30 in
-
Blade
-
VPAT
-
Blade Capacity
-
5.9 yd³
-
D6 LGP (36-in) VPAT
Operating Weight
-
51912 lb
-
Ground Pressure
-
5 psi
-
Width of Standard Shoe
-
36 in
-
Blade
-
VPAT
-
Blade Capacity
-
6.5 yd³
-
Sustainability
Recyclability
-
98%
-
Air Conditioning System
Air Conditioning
-
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.36 kg of refrigerant which has a CO2 equivalent of 1.946 metric tonnes.
