|
|
|
|
Engine - Tier 4 Final/EU Stage V |
Engine Model |
Cat C7.1 |
- |
- |
Net Power (SAE J1349:2011) |
249 HP |
- |
- |
Net Power (ISO 9249:2007) |
249 HP |
- |
- |
Emissions |
U.S. EPA Tier 4 Final/EU Stage V |
- |
- |
Rated Speed |
2200 r/min |
- |
- |
Gross Power (SAE J1995:2014) |
284 HP |
- |
- |
Engine Power (ISO 14396:2002) |
275 HP |
- |
- |
Peak Torque - 1,400 rpm |
902 lb/ft |
- |
- |
Torque Rise |
52% |
- |
- |
Bore |
4.1 in |
- |
- |
Stroke |
5.3 in |
- |
- |
Displacement |
427.8 in³ |
- |
- |
High Idle Speed |
2270 r/min |
- |
- |
Low Idle Speed |
800 r/min |
- |
- |
Maximum Altitude without Derating |
9842.5 ft |
- |
- |
Note |
Net power advertised is the power available at the engine flywheel when the engine is equipped with a fan, air cleaner, clean emissions module and alternator. |
- |
- |
Operating Specifications - Tier 4 Final/EU Stage V |
Operating Weight |
48526 lb |
- |
- |
Scoops |
Chip Scoop Doze Capacity |
37.9 yd³ |
70 yd³ |
- |
Chip Scoop Carry Capacity |
19 yd³ |
35 yd³ |
- |
Coal Scoop Carry Capacity |
- |
30 yd³ |
- |
Coal Scoop Doze Capacity |
- |
60 yd³ |
- |
Engine - Brazil Mar-1 and China Nonroad Stage III, Equivalent to Tier 3/EU Stage IIIA |
Engine Model |
Cat C7.1 |
- |
- |
Emissions |
Brazil MAR-1 and China Nonroad Stage III, equivalent to Tier 3/EU Stage IIIA |
- |
- |
Rated Speed |
2200 r/min |
- |
- |
Net Power (SAE J1349:2011) |
249 HP |
- |
- |
Gross Power (SAE J1995:2014) |
286 HP |
- |
- |
Engine Power (ISO 14396:2002) |
275 HP |
- |
- |
Peak Torque - 1,400 rpm |
749 lb/ft |
- |
- |
Torque Rise |
26% |
- |
- |
Bore |
4.1 in |
- |
- |
Stroke |
5.3 in |
- |
- |
Displacement |
427.8 in³ |
- |
- |
High Idle Speed |
2270 r/min |
- |
- |
Operating Specifications - Brazil Mar-1 and China Nonroad Stage III, Equivalent to Tier 3/EU Stage IIIA |
Operating Weight |
47887 lb |
- |
- |
Operating Specifications - Tier 4 Final/EU Stage V - Scoop |
Operating Weight |
52280 lb |
- |
- |
Operating Specifications - Brazil Mar-1 and China Nonroad Stage III, Equivalent to Tier 3/EU Stage IIIA - Scoop |
Operating Weight |
51639 lb |
- |
- |
Transmission |
Transmission Type |
Cat Planetary Power Shift |
Cat planetary power shift |
Cat Planetary Power Shift |
Forward - 1 |
3.7 mile/h |
4.2 mile/h |
- |
Forward - 2 |
6.5 mile/h |
7.2 mile/h |
- |
Forward - 3 |
11.2 mile/h |
12.6 mile/h |
- |
Forward - 4 |
19.4 mile/h |
22 mile/h |
- |
Reverse - 1 |
4.2 mile/h |
4.2 mile/h |
- |
Reverse - 2 |
7.3 mile/h |
7.6 mile/h |
- |
Reverse - 3 |
12.8 mile/h |
13.3 mile/h |
- |
Reverse - 4 |
22.1 mile/h |
- |
- |
Direct Drive - Forward 1 |
- |
Lock-up disabled |
Lock-up disabled |
Direct Drive - Forward 2 |
- |
7.7 mile/h |
8.1 mile/h |
Direct Drive - Forward 3 |
- |
13.7 mile/h |
14.2 mile/h |
Direct Drive - Forward 4 |
- |
23.9 mile/h |
- |
Direct Drive - Reverse 1 |
- |
4.5 mile/h |
5 mile/h |
Direct Drive - Reverse 2 |
- |
8.1 mile/h |
8.9 mile/h |
Direct Drive - Reverse 3 |
- |
14.3 mile/h |
15.6 mile/h |
Converter Drive - Forward 1 |
- |
- |
4.4 mile/h |
Converter Drive - Forward 2 |
- |
- |
7.7 mile/h |
Converter Drive - Forward 3 |
- |
- |
13.2 mile/h |
Converter Drive - Reverse 1 |
- |
- |
4.8 mile/h |
Converter Drive - Reverse 2 |
- |
- |
8.4 mile/h |
Converter Drive - Reverse 3 |
- |
- |
14.6 mile/h |
Note |
- |
- |
Travel speeds based on 45/65-45 L-5 46 ply tires. |
Hydraulic System - Lift/Tilt |
Lift/Tilt System - Circuit |
Pilot operated LS valve with EH |
Pilot operated LS valve with EH |
- |
Lift/Tilt System |
Variable displacement piston |
Variable displacement piston |
- |
Maximum Flow at 2,200 rpm |
23.5 gal/min |
- |
- |
Relief Valve Setting - Lift/Tilt |
3190 psi |
4641 psi |
- |
Cylinders, Double Acting - Lift, Bore and Stroke |
120 mm × 915 mm (4.7 in × 36.0 in) |
139.75 mm × 1021 mm (5.5 in × 40.2 in) |
177 mm × 1760 mm (0.58 ft × 5.8 ft) |
Cylinders, Double Acting - Left and Right Tilt, Bore and Stroke |
101.6 mm × 234 mm (4.0 in × 9.2 in) |
140 mm × 230 mm (5.5 in × 9.1 in) |
- |
Pilot System |
Open center, fixed displacement gear |
Variable displacement piston |
- |
Pilot Relief Valve Setting |
3046 psi |
580 psi |
- |
Maximum Flow at 1,900 rpm |
- |
153 gal/min |
- |
Pilot Maximum Flow |
- |
13.7 gal/min |
- |
Output at 1,850 rpm and 6900 kPa (1,000 psi) |
- |
- |
161 gal/min |
Cylinder, Double Acting - Tilt and Tip, Bore and Stroke |
- |
- |
267 mm × 286 mm (0.88 ft × 0.94 ft) |
Hydraulic System - Steering |
Steering System - Circuit |
Pilot, load sensing |
Pilot, load sensing |
Pilot, load sensing |
Steering System - Pump |
Variable displacement piston |
Piston, variable displacement |
Piston, variable displacement |
Maximum Flow at 2,200 rpm |
38.8 gal/min |
- |
- |
Relief Valve Setting - Steering |
4003 psi |
3495 psi |
- |
Total Steering Angle |
72° |
86 ° |
86 degrees |
Steering Cycle Times - High Idle |
3 s |
3.1 s |
- |
Steering Cycle Times - Low Idle |
8.2 s |
5.7 s |
- |
Maximum Flow |
- |
65.8 gal/min |
- |
Minimum Turning Radius - Over Blade |
- |
- |
31 ft |
Relief Valve Setting |
- |
- |
5004 psi |
Service Refill Capacities |
Fuel Tank |
132.1 gal (US) |
209.5 gal (US) |
- |
Diesel Exhaust Fluid Tank |
4.2 gal (US) |
8.7 gal (US) |
- |
Cooling Systems - Tier 4 Final/EU Stage V |
21.4 gal (US) |
- |
- |
Cooling Systems - Brazil MAR-1 and China NonroadStage III, equivalent to Tier 3/EU Stage IIIA |
19.3 gal (US) |
- |
- |
Engine Crankcase |
5.3 gal (US) |
- |
- |
Transmission |
13.2 gal (US) |
31.7 gal (US) |
45 gal (US) |
Differential - Final Drives - Front |
17.2 gal (US) |
49.1 gal (US) |
98 gal (US) |
Differential - Final Drives - Rear |
17.2 gal (US) |
49.1 gal (US) |
90 gal (US) |
Hydraulic System - Implement/Steering |
34.1 gal (US) |
- |
- |
Hydraulic Tank Only |
19.8 gal (US) |
- |
- |
Cooling System |
- |
31.7 gal (US) |
53 gal (US) |
Crankcase |
- |
15.9 gal (US) |
32 gal (US) |
Hydraulic System Factory Fill |
- |
63.4 gal (US) |
- |
Hydraulic System - Tank Only |
- |
37 gal (US) |
- |
Fuel Tank - Standard |
- |
- |
413 gal (US) |
Hydraulic System - Steering and Engine Cooling Fan - Tank Only |
- |
- |
77 gal (US) |
Note (1) |
- |
- |
- All nonroad U.S. EPA Tier 4, European Union (EU) Stage IIIB and V, and Japan (MLIT) Step 4 diesel engines are required to use only Ultra Low Sulfer Diesel (ULSD) fuels containing 15 ppm (mg/kg) sulfer or less. Biodiesel blends up to B20 (20% blend by vo |
Axles |
Front |
Planetary – Fixed |
Fixed |
Fixed |
Rear |
Planetary – Oscillating |
Trunnion |
Trunnion |
Oscillation Angle |
±10° |
±13° |
- |
Braking System |
Service Brakes |
Single Disc Wet (enclosed) 4 WHL |
- |
- |
Parking Brake |
Drum and Shoe, Spring Applied, Hydraulic Released |
- |
- |
Dimensions (Approximate) |
Height to Top of Beacon |
13.1 ft |
- |
- |
Height - Top of Cab |
12.1 ft |
- |
- |
Height - Top of Exhaust Pipe |
11.3 ft |
- |
17.17 ft |
Height - Top of Hood |
8.7 ft |
- |
13 ft |
Height to Top of Radiator Guard |
8 ft |
- |
- |
Ground Clearance to Hitch |
1.4 ft |
- |
- |
Ground Clearance to Transmission Guard |
1.4 ft |
- |
- |
Ground Clearance to Bottom of Bumper |
2.3 ft |
- |
- |
Centerline of Rear Axle to Bumper |
6.5 ft |
- |
- |
Centerline of Front Axle to Hitch |
5.5 ft |
- |
9.67 ft |
Wheel Base |
11 ft |
- |
19.25 ft |
Width over Platform |
10.3 ft |
- |
- |
Overall Length to Front Tire |
21 ft |
- |
- |
Overall Machine Length with Straight Blade |
23.6 ft |
- |
- |
Overall Machine Length with Coal Blade |
25.5 ft |
- |
- |
Height - Top of ROPS |
- |
- |
18.25 ft |
Ground Clearance |
- |
- |
27 in |
Centerline of Rear Axle to Edge of Bumper |
- |
- |
13.75 ft |
Length - With Blade on Ground |
- |
- |
44 ft |
Sound Performance - Tier 4 Final/EU Stage V - Standard |
Operator Sound Level (ISO 6396) |
70 dB(A) |
72 dB(A) |
- |
Machine Sound Level (ISO 6395) |
111 dB(A) |
113 dB(A) |
- |
Note (1) |
The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at the maximum engine cooling fan speed. |
- |
- |
Note (2) |
Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. |
- |
- |
Note (3) |
The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at the maximum engine cooling fan speed. |
- |
- |
Note (4) |
The operator sound pressure level uncertainty is ± 2 dB(A) |
- |
- |
Sound Performance - Tier 4 Final/EU Stage V - Suppression |
Operator Sound Level (ISO 6396) |
70 dB(A) |
72 dB(A) |
- |
Machine Sound Level (ISO 6395) |
109 dB(A) |
109 dB(A) |
- |
Note (1) |
The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at the maximum engine cooling fan speed. |
- |
- |
Note (2) |
Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. |
- |
- |
Note (3) |
The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at the maximum engine cooling fan speed. |
- |
- |
Note (4) |
The operator sound pressure level uncertainty is ± 2 dB(A). |
- |
- |
Sound Performance - Brazil Mar-1 and China Nonroad Stage III, Equivalent to Tier 3/EU Stage IIIA - Standard |
Operator Sound Level (ISO 6396) |
70 dB(A) |
- |
- |
Machine Sound Level (ISO 6395) |
112 dB(A) |
- |
- |
Note (1) |
The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at the maximum engine cooling fan speed. |
- |
- |
Note (2) |
Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. |
- |
- |
Note (3) |
The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at the maximum engine cooling fan speed. |
- |
- |
Note (4) |
The operator sound pressure level uncertainty is ± 2 dB(A). |
- |
- |
Sound Performance - Brazil Mar-1 and China Nonroad Stage III, Equivalent to Tier 3/EU Stage IIIA - Suppression |
Operator Sound Level (ISO 6396) |
70 dB(A) |
- |
- |
Machine Sound Level (ISO 6395) |
110 dB(A) |
- |
- |
Note (1) |
The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at the maximum engine cooling fan speed. |
- |
- |
Note (2) |
Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. |
- |
- |
Note (3) |
The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at the maximum engine cooling fan speed. |
- |
- |
Note (4) |
The operator sound pressure level uncertainty is ± 2 dB(A). |
- |
- |
Engine |
Engine Model |
- |
Cat® C18 |
Cat C32B |
Rated Speed |
- |
1900 r/min |
1750 r/min |
Peak Power Speed |
- |
1500 r/min |
- |
Gross Power - SAE J1995 |
- |
562 HP |
- |
Net Power - SAE J1349 |
- |
496 HP |
- |
Bore |
- |
5.7 in |
5.7 in |
Stroke |
- |
7.2 in |
6.4 in |
Displacement |
- |
1105 in³ |
1958 in² |
Peak Torque - 1,300 rpm |
- |
2092 lb/ft |
- |
Torque Rise |
- |
52 % |
30 % |
Emissions |
- |
U.S. EPA Tier 4 Final and EU Stage V emission standards or equivalent to U.S. EPA Tier 3 and U.S. EPA Tier 2. |
- |
Gross Power |
- |
- |
907 HP |
Emissions (U.S. EPA Tier 4 Final): Gross Power - SAE J1995 |
- |
- |
900 HP |
Emissions (U.S. EPA Tier 4 Final): Net Power ISO - 9249 |
- |
- |
814 HP |
Emissions (Tier 2 Equivalent): Gross Power - SAE J1995 |
- |
- |
907 HP |
Emissions (Tier 2 Equivalent): Net Power ISO - 9249 |
- |
- |
823 HP |
Peak Torque - 1,200 rpm |
- |
- |
3139 lb/ft |
Note (1) |
- |
- |
Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, muffler and alternator. |
Note (2) |
- |
- |
Net torque rise meets SAE J139. |
Note (3) |
- |
- |
No engine derating required up to 3050 m (10,000 ft) altitude. |
Operating Specifications |
Operating Weight |
- |
105271 lb |
224647 lb |
Blade Capacities |
- |
7.9 – 22.2 m3 (10.3 – 29.0 yd3) |
- |
Coal Scoop Operating Weight |
- |
112428 lb |
- |
Chip Scoop Operating Weight |
- |
112838 lb |
- |
Air Conditioning System |
Air Conditioning |
- |
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes. |
The air conditioning system on this machine contains the fluorinated
greenhouse gas refrigerant R134a (Global Warming Potential = 1430).
The system contains 1.8 kg of refrigerant which has a CO2 equivalent
of 2.574 metric tonnes. |
Brakes |
Brakes |
- |
ISO 3450: 2011 |
Meets ISO 3540:2011 |
Dimensions |
Height - Top of Exhaust Stack |
- |
15.9 ft |
- |
Height - Top of Air Cleaner |
- |
12.8 ft |
- |
Height - Top of Hood |
- |
10.9 ft |
- |
Ground Clearance - Bumper |
- |
3.1 ft |
- |
Centerline of Rear Axle to Edge of Bumper |
- |
10.5 ft |
- |
Wheel Base |
- |
14.9 ft |
- |
Length - Front of Tire |
- |
28.4 ft |
- |
Length - Straight Blade on Ground |
- |
32.6 ft |
- |
Centerline of Front Axle to Hitch |
- |
7.5 ft |
- |
Length - Universal Blade on Ground |
- |
34.4 ft |
- |
Ground Clearance |
- |
1.7 ft |
- |
Height - Top of Cab |
- |
13.7 ft |
- |
Weights |
Operating Weight |
- |
- |
224647 lb |
Blades |
Blade Capacities |
- |
- |
30.5 to 44.8 m3 (40 to 58.6 yd3) |
Sound Performance Levels |
Sound Performance |
- |
- |
• The machine sound power level was measured according to
ISO 6395:2008. The measurement was conducted at 70 percent
of the maximum engine cooling fan speed.
• The operator sound pressure level was measured according to
ISO 6396:2008. The measurement was |
Cab |
ROPS/FOPS |
- |
- |
ISO 3471:2008 and ISO 3449:2005 Level II Standards |