CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    814 Wheel Dozer
    View Product
    D9 Dozer
    View Product Remove
    D11 Dozer
    View Product Remove
    D3 Track-Type Tractor
    View Product Remove

    Engine - Tier 4 Final/EU Stage V
    Engine Model Cat C7.1 - - -
    Net Power (SAE J1349:2011) 249 HP - - -
    Net Power (ISO 9249:2007) 249 HP - - -
    Emissions U.S. EPA Tier 4 Final/EU Stage V - - -
    Rated Speed 2200 r/min - - -
    Gross Power (SAE J1995:2014) 284 HP - - -
    Engine Power (ISO 14396:2002) 275 HP - - -
    Peak Torque - 1,400 rpm 902 lb/ft - - -
    Torque Rise 52% - - -
    Bore 4.1 in - - -
    Stroke 5.3 in - - -
    Displacement 427.8 in³ - - -
    High Idle Speed 2270 r/min - - -
    Low Idle Speed 800 r/min - - -
    Maximum Altitude without Derating 9842.5 ft - - -
    Note Net power advertised is the power available at the engine flywheel when the engine is equipped with a fan, air cleaner, clean emissions module and alternator. - - -

    Operating Specifications - Tier 4 Final/EU Stage V
    Operating Weight 48526 lb - - -

    Scoops
    Chip Scoop Doze Capacity 37.9 yd³ - - -
    Chip Scoop Carry Capacity 19 yd³ - - -

    Engine - Brazil Mar-1 and China Nonroad Stage III, Equivalent to Tier 3/EU Stage IIIA
    Engine Model Cat C7.1 - - -
    Emissions Brazil MAR-1 and China Nonroad Stage III, equivalent to Tier 3/EU Stage IIIA - - -
    Rated Speed 2200 r/min - - -
    Net Power (SAE J1349:2011) 249 HP - - -
    Gross Power (SAE J1995:2014) 286 HP - - -
    Engine Power (ISO 14396:2002) 275 HP - - -
    Peak Torque - 1,400 rpm 749 lb/ft - - -
    Torque Rise 26% - - -
    Bore 4.1 in - - -
    Stroke 5.3 in - - -
    Displacement 427.8 in³ - - -
    High Idle Speed 2270 r/min - - -

    Operating Specifications - Brazil Mar-1 and China Nonroad Stage III, Equivalent to Tier 3/EU Stage IIIA
    Operating Weight 47887 lb - - -

    Operating Specifications - Tier 4 Final/EU Stage V - Scoop
    Operating Weight 52280 lb - - -

    Operating Specifications - Brazil Mar-1 and China Nonroad Stage III, Equivalent to Tier 3/EU Stage IIIA - Scoop
    Operating Weight 51639 lb - - -

    Transmission
    Transmission Type Cat Planetary Power Shift - - -
    Forward - 1 3.7 mile/h - - -
    Forward - 2 6.5 mile/h - - -
    Forward - 3 11.2 mile/h - - -
    Forward - 4 19.4 mile/h - - -
    Reverse - 1 4.2 mile/h - - -
    Reverse - 2 7.3 mile/h - - -
    Reverse - 3 12.8 mile/h - - -
    Reverse - 4 22.1 mile/h - - -
    1.0 Forward - 2.2 mile/h 2.5 mile/h -
    2.0 Forward - 3.9 mile/h 4.4 mile/h -
    3.0 Forward - 6.8 mile/h 7.6 mile/h -
    1.0 Reverse - 2.7 mile/h 3 mile/h -
    2.0 Reverse - 4.8 mile/h 5.3 mile/h -
    3.0 Reverse - 8.4 mile/h 9.1 mile/h -
    Type - Planetary powershift - -
    Drawbar Pull - 3 Forward - - 46250 ft·lbf -
    Drawbar Pull - 1 Forward - - 148200 ft·lbf -
    Drawbar Pull - 2 Forward - - 82300 ft·lbf -
    Drive Pumps - - - 1
    Maximum Travel Speed - Forward - - - 5.6 mile/h
    Maximum Travel Speed - Reverse - - - 6.2 mile/h
    Track Motors - - - 2
    Relief Valve Settings - - - 7033 psi

    Hydraulic System - Lift/Tilt
    Lift/Tilt System - Circuit Pilot operated LS valve with EH - - -
    Lift/Tilt System Variable displacement piston - - -
    Maximum Flow at 2,200 rpm 23.5 gal/min - - -
    Relief Valve Setting - Lift/Tilt 3190 psi - - -
    Cylinders, Double Acting - Lift, Bore and Stroke 120 mm × 915 mm (4.7 in × 36.0 in) - - -
    Cylinders, Double Acting - Left and Right Tilt, Bore and Stroke 101.6 mm × 234 mm (4.0 in × 9.2 in) - - -
    Pilot System Open center, fixed displacement gear - - -
    Pilot Relief Valve Setting 3046 psi - - -

    Hydraulic System - Steering
    Steering System - Circuit Pilot, load sensing - - -
    Steering System - Pump Variable displacement piston - - -
    Maximum Flow at 2,200 rpm 38.8 gal/min - - -
    Relief Valve Setting - Steering 4003 psi - - -
    Total Steering Angle 72° - - -
    Steering Cycle Times - High Idle 3 s - - -
    Steering Cycle Times - Low Idle 8.2 s - - -

    Service Refill Capacities
    Fuel Tank 132.1 gal (US) - - 51.5 gal (US)
    Diesel Exhaust Fluid Tank 4.2 gal (US) - - -
    Cooling Systems - Tier 4 Final/EU Stage V 21.4 gal (US) - - -
    Cooling Systems - Brazil MAR-1 and China NonroadStage III, equivalent to Tier 3/EU Stage IIIA 19.3 gal (US) - - -
    Engine Crankcase 5.3 gal (US) - 35.1 gal (US) -
    Transmission 13.2 gal (US) - - -
    Differential - Final Drives - Front 17.2 gal (US) - - -
    Differential - Final Drives - Rear 17.2 gal (US) - - -
    Hydraulic System - Implement/Steering 34.1 gal (US) - - -
    Hydraulic Tank Only 19.8 gal (US) - - -
    Cooling System - - 46.8 gal (US) 5 gal (US)
    Cooling System Refill - Tier 2 Equivalent Engine - - 41.7 gal (US) -
    Power Train - - 120 gal (US) -
    Power Train - Refill Volume - - 103.3 gal (US) -
    Final Drive - Each - - 12.4 gal (US) -
    Roller Frames - Each - - 24.8 gal (US) -
    Hydraulic Tank - - 42.2 gal (US) -
    Hydraulic System Tank and Chassis - - 64.7 gal (US) -
    Hydraulic System Chassis + Blade and Ripper (Standard) - - 117.6 gal (US) -
    Hydraulic System Chassis + Blade and Ripper (Carrydozer) - - 143.4 gal (US) -
    Final Drive - Each - LGP - - - 2.6 gal (US)
    Crankcase - With Filter - - - 2.8 gal (US)
    Transmission - Hydraulic Tank - - - 23.8 gal (US)
    Final Drives - Each Side - - - 2.6 gal (US)
    Diesel Exhaust Fluid (DEF) Tank - - - 4.9 gal (US)

    Axles
    Front Planetary – Fixed - - -
    Rear Planetary – Oscillating - - -
    Oscillation Angle ±10° - - -

    Braking System
    Service Brakes Single Disc Wet (enclosed) 4 WHL - - -
    Parking Brake Drum and Shoe, Spring Applied, Hydraulic Released - - -

    Dimensions (Approximate)
    Height to Top of Beacon 13.1 ft - - -
    Height - Top of Cab 12.1 ft - - -
    Height - Top of Exhaust Pipe 11.3 ft - - -
    Height - Top of Hood 8.7 ft - - -
    Height to Top of Radiator Guard 8 ft - - -
    Ground Clearance to Hitch 1.4 ft - - -
    Ground Clearance to Transmission Guard 1.4 ft - - -
    Ground Clearance to Bottom of Bumper 2.3 ft - - -
    Centerline of Rear Axle to Bumper 6.5 ft - - -
    Centerline of Front Axle to Hitch 5.5 ft - - -
    Wheel Base 11 ft - - -
    Width over Platform 10.3 ft - - -
    Overall Length to Front Tire 21 ft - - -
    Overall Machine Length with Straight Blade 23.6 ft - - -
    Overall Machine Length with Coal Blade 25.5 ft - - -
    Ground Clearance* - 18.1 in - -
    Track Gauge - 88.6 in - -
    Width - Without Trunnions - Standard Shoe - 113 in - -
    Width - Over Trunnions - 130.3 in - -
    Height - FOPS Cab* - 150.4 in - -
    Height - Top of Stack* - 152.6 in - -
    Height - ROPS/Canopy* - 157.5 in - -
    Drawbar Height (Center of Clevis)* - 30 in - -
    Length - Track on Ground - 136.6 in - -
    Overall Length - Basic Tractor - 193.3 in - -
    Length - Basic Tractor - With Drawbar - 206.4 in - -
    Length - Basic Tractor - With Winch - 218.3 in - -
    Length - With SU-Blade** - 259.9 in - -
    Length - With U-Blade - 274.3 in - -
    Length - With Single-Shank Ripper - 257 in - -
    Length - With Multi-Shank Ripper - 257.4 in - -
    Overall Length - SU-Blade/SS Ripper - 323.6 in - -
    Note (1) - *Includes grouser height for total dimensions on hard surfaces. - -

    Sound Performance - Tier 4 Final/EU Stage V - Standard
    Operator Sound Level (ISO 6396) 70 dB(A) - - -
    Machine Sound Level (ISO 6395) 111 dB(A) - - -
    Note (1) The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at the maximum engine cooling fan speed. - - -
    Note (2) Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. - - -
    Note (3) The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at the maximum engine cooling fan speed. - - -
    Note (4) The operator sound pressure level uncertainty is ± 2 dB(A) - - -

    Sound Performance - Tier 4 Final/EU Stage V - Suppression
    Operator Sound Level (ISO 6396) 70 dB(A) - - -
    Machine Sound Level (ISO 6395) 109 dB(A) - - -
    Note (1) The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at the maximum engine cooling fan speed. - - -
    Note (2) Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. - - -
    Note (3) The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at the maximum engine cooling fan speed. - - -
    Note (4) The operator sound pressure level uncertainty is ± 2 dB(A). - - -

    Sound Performance - Brazil Mar-1 and China Nonroad Stage III, Equivalent to Tier 3/EU Stage IIIA - Standard
    Operator Sound Level (ISO 6396) 70 dB(A) - - -
    Machine Sound Level (ISO 6395) 112 dB(A) - - -
    Note (1) The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at the maximum engine cooling fan speed. - - -
    Note (2) Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. - - -
    Note (3) The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at the maximum engine cooling fan speed. - - -
    Note (4) The operator sound pressure level uncertainty is ± 2 dB(A). - - -

    Sound Performance - Brazil Mar-1 and China Nonroad Stage III, Equivalent to Tier 3/EU Stage IIIA - Suppression
    Operator Sound Level (ISO 6396) 70 dB(A) - - -
    Machine Sound Level (ISO 6395) 110 dB(A) - - -
    Note (1) The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at the maximum engine cooling fan speed. - - -
    Note (2) Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. - - -
    Note (3) The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at the maximum engine cooling fan speed. - - -
    Note (4) The operator sound pressure level uncertainty is ± 2 dB(A). - - -

    Engine - U.S. EPA Tier 2/3 Equivalent
    Engine Model - Cat® C18 - -
    Engine Power - Net SAE J1349/ISO 9249 - 452 HP - -
    Bore - 5.7 in³ - -
    Stroke - 7.2 in - -
    Displacement - 1106 in³ - -
    Engine Power - Gross SAE J1995 - 487 HP - -
    Engine Power - ISO 14396 - 479 HP - -
    Emissions - U.S. EPA Tier 2 or Tier 3 equivalent - -
    Note (1) - All engine ratings apply at 1,750 rpm. - -
    Note (2) - No derating required up to 4267 m (14,000 ft) altitude. - -

    Weights
    Operating Weight - 110225 lb 229800 lb 20640 lb
    Shipping Weight - 84373 lb - -
    Note (1) - D9 Operation Weight includes hydraulic controls, blade tilt cylinder, coolant, lubricants, full fuel tank, ROPS, FOPS cab, SU Blade, Single-Shank Ripper, 610 mm (24 in) ES shoes and operator. D11 Operating Weight: Includes blade tilt cylinders, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 11U ABR bulldozer, single-shank ripper with pin-puller, fast fuel, 710 mm (28 in) ES shoes, and operator. Specifications shown are for machine equipped with dozer blade, EROPS cab, back-up alarm, operator, coolant, lubricants and full fuel tank.
    Note (2) - D9 Operation Weight includes base machine chassis with cab, pivot shaft, roller frames, track and ROPS. D11 CD Operating Weight: Includes lubricant, coolant, full fuel tank, 915 mm (36 in) extreme service shoes, 11 Carrydozer, singleshank ripper, and operator. For machine with ripper, add 554 kg (1,222 lb).
    Operating Weight - Carrydozer - - 250665 lb -
    Operating Weight - LGP - - - 21369 lb
    Operating Weight - LGP, 762 mm/30 in - - - 21810 lb

    Undercarriage
    Shoe Type - Extreme Service Extreme Service -
    Width - Shoe - 24 in 28 in -
    Shoes/Side - 43 41 -
    Grouser Height - 3.3 in 4 in -
    Pitch - 9.4 in 12.5 in -
    Ground Clearance - 18.1 in - -
    Track Gauge - 88.6 in 114 in 63 in
    Length - Track on Ground - 136.6 in 175 in -
    Ground Contact Area - 45.6 ft² 9781 in² -
    Track Rollers/Side - 8 8 -
    Number of Carrier Rollers - 1 per side (optional) 1 per side (optional) -
    Width - Shoe - CD - - 36 in -
    Ground Clearance* - - 30.6 in -
    Ground Contact Area - CD - - 12605 in² -
    Ground Pressure - LGP - - - 4.5 psi
    Track Gauge - LGP - - - 69 in
    Length - Track on Ground - LGP - - - 91 in
    Number of Shoes - Each Side - Sealed and Lubricated Track (SALT) Undercarriage - - - 40
    Ground Pressure - LGP, 762 mm (30 in) - - - 3.9 psi
    Length - Track on Ground - LGP, 762 mm (30 in) - - - 91 in
    Shoe Width - LGP - - - 26 in
    Shoe Width - LGP, 762 mm (30 in) - - - 30 in
    Number of Rollers - Each Side - - - 7
    Track Gauge - LGP, 762 mm (30 in) - - - 73 in
    Ground Pressure - - - 5.7 psi
    Length of Track on Ground - - - 91 in
    Number of Shoes - Each Side - Abrasion Undercarriage - - - 36
    Shoe Width - Standard - - - 20 in

    Standards
    ROPS - Rollover Protective Structure (ROPS) meets the following criteria ISO 3471:2008. Rollover Protective Structure (ROPS) meets the following criteria: ISO 3471:2008 -
    FOPS - Falling Object Protective Structure (FOPS) meets the following criteria ISO 3449:2005 LEVEL II. Falling Objects Protective Structure (FOPS) meets the following criteria: ISO 3449:2005 LEVEL II -
    Sound - The average dynamic spectator sound power level when ISO 6395:2008 is used to measure the value for a machine is 116 dB(A). The measurement was conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling - -
    Sound (1) - The average dynamic operator sound pressure level when ISO 6396:2008 is used to measure the value for an enclosed cab is 78 dB(A). The measurement was conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine c The exterior sound pressure level for the standard machine (ISO 6396:2008) is 116 dB(A) (sound suppressed). -
    Sound (2) - Hearing protection may be needed when the machine is operated with an open operator station for extended periods, in a noisy environment, or with a cab that is not properly maintained. The operator equivalent sound pressure level (ISO 6396:2008) is 78 dB(A) (sound suppressed). -

    Steering and Brakes
    Steering Type - Differential - -
    Brake Type - Spring Applied Wet Disc - -
    Brake Diameter - 15.5 in - -
    Brake Count - 8 - -

    Engine - U.S. EPA Tier 4 Final/EU Stage V
    Engine Model - Cat® C18 Cat® C32 -
    Bore - 5.7 in³ - -
    Stroke - 7.2 in³ - -
    Displacement - 1106 in³ 1959 in³ -
    Engine Power - Gross SAE J1995 - 477 HP - -
    Engine Power - ISO 14396 - 468 HP - -
    Engine Power - Net SAE J1349/ISO 9249 - 440 HP - -
    Emissions - U.S. EPA Tier 4 / EU Stage V - -
    Note (1) - All Engine ratings apply at 1,750 rpm. *Excludes all fan losses. -
    Note (2) - No derating required up to 2499 m (8,200 ft). Engine ratings apply at 1,800 rpm. -
    Engine Power - Net SAE J1349/ISO 9249 - Forward - - 850 HP -
    Engine Power - Net SAE J1349/ISO 9249 - Reverse - - 955 HP -
    Note (3) - - Net power advertised is the power available at the flywheel when the engine is equipped with air cleaner, muffler, alternator, fan, and engine emissions controls as required. -

    FLUID CAPACITIES
    Fuel Tank (Splash Fill) - 254 gal (US) - -
    DEF Tank (Tier 4 only) - 9.5 gal (US) - -
    Fuel Tank (Fast Fill) - 248 gal (US) - -
    Cooling System - 21 gal (US) - -
    Engine Crankcase* - 10 gal (US) - -
    Powertrain - 40 gal (US) - -
    Final Drives (each) - 4 gal (US) - -
    Roller Frames (each) - 12 gal (US) - -
    Pivot Shaft Oil - 8 gal (US) - -
    Hydraulic System Tank - 24 gal (US) - -
    Note - *With oil filters. - -
    Note 2 - Biodiesel blends up to B20 (20% blend by volume) are acceptable when blended with 15 ppm (mg/kg) sulfur or less ULSD. B20 should meet ASTM D7467 specification (biodiesel blend stock should meet Cat biodiesel spec, ASTM D6751 or EN 14214). Cat DEO-ULSTM or - -
    Note 3 - All non-road Tier 4 Final diesel engines are required to use only ultra-low sulfur diesel (ULSD) fuels containing 15 ppm (mg/kg) sulfur or less. - -
    Note 4 - Diesel Exhaust Fluid (DEF) used in Cat Selective Catalytic Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241. - -

    Hydraulic Controls
    Pump Type - Piston-type geared to flywheel Variable displacement piston pump -
    Pump Output - Steering - 96 gal/min - -
    Fan Pump - 21 gal/min - -
    Tilt Cylinder Flow - Rod End Flow - 53 gal/min - -
    Tilt Cylinder Flow - Head End Flow - 53 gal/min - -
    Lift Cylinder Relief Valve Setting - 3800 lbf/in - -
    Tilt Cylinder Relief Valve Setting - 2799 psi - -
    Ripper - Lift - Relief Valve Setting - 3800 psi - -
    Ripper - Pitch - Relief Valve Setting - 3800 psi - -
    Steering System - Pressure - 5874 psi - -
    Tank Capacity - 24 gal/min - -
    Note (1) - Steering pump output measured at 1,750 engine rpm and 30 000 kPa (4,350 psi). - -
    Note (2) - Implement pump output measured at 1,750 engine rpm and 20 000 kPa (2,900 psi). - -
    Note (3) - Fan pump output measured at 1,750 engine rpm and 17 000 kPa (2,470 psi) - -
    Combined Pump Output - Implement - - 177 gal/min -
    Pump Output - - - 17.2 gal/min
    Relief Valve Settings - - - 2988 psi

    Air Conditioning System
    Air Conditioning - The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430) the system contains 2.1 kg of refrigerant which has a CO2 equivalent of 3.003 metric tonnes. - The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes.
    Note (1) - - The air conditioning system on this machine contains the flourinated greenhouse gas refrigerant R134a (Global Warning Potential = 1430). The system contains 2.1 kg (4.6 lb) of refrigerant which has a CO2 equivalent of 3.003 metric tonnes (3.31 tons) -

    Blade - Semi-Universal
    Blade Capacity (SAE J1265) - 17.8 yd³ - -
    Blade Width (over end bits) - 171.3 in - -
    Blade Height - 76.1 in - -
    Maximum Digging Depth - 23.9 in - -
    Ground Clearance at Full Lift - 56 in - -
    Maximum Tilt - 37 in - -
    Blade Weight - 10587 lb - -
    Total Operating Weight* (with blade and single-shank ripper) - 110205 lb - -
    Note - * Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes and the noted blade and ripper type. - -

    Blade - Universal
    Blade Capacity (SAE J1265) - 21.7 yd³ - -
    Blade Width (over end bits) - 184.3 in - -
    Blade Height - 76.1 in - -
    Maximum Digging Depth - 23.9 in - -
    Ground Clearance at Full Lift - 56 in - -
    Maximum Tilt - 39.9 in - -
    Blade Weight - 12016 lb - -
    Total Operating Weight* (with blade and single-shank ripper) - 111362 lb - -
    Note - *Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes and the noted blade and ripper type. - -

    Ripper - Single Shank
    Maximum penetration force * (shank vertical) - 35520 lbf 66000 lb -
    Maximum penetration depth (standard tip) - 48.5 in 63.5 in -
    Pryout Force - 74637 lbf 148510 lb -
    Maximum Clearance Raised - Under Tip, Pinned in Bottom Hole - 34.7 in - -
    Number of Pockets - 1 - -
    Weight - 10701 lb - -
    Total Operating Weight* (with SU Blade and noted ripper) - 110205 lb - -
    Note - *Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes and the noted blade and ripper type. - -

    Ripper - Single Shank, Deep Ripping
    Maximum penetration force * (shank vertical) - 38667 lbf 66110 lb -
    Maximum penetration depth (standard tip) - 68 in 85.5 in -
    Pryout Force - 74412 lbf 148510 lb -
    Maximum Clearance Raised - Under Tip, Pinned in Bottom Hole - 32.2 in - -
    Number of Pockets - 1 - -
    Weight - 10981 lb - -
    Total Operating Weight* (with SU Blade and noted ripper) - 110485 lb - -
    Note - *Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes and the noted blade and ripper type. - -

    Ripper - Multi-Shank, Adjustable Parallelogram
    Maximum Penetration Force - Shank Vertical - 34621 lbf 77350 lb -
    Maximum Penetration - Standard Tip - 31.4 in 43.3 in -
    Pry-Out Force - Multi-Shank Ripper with One Tooth - 81156 lbf 145640 lb -
    Maximum Clearance Raised - Under Tip, Pinned in Bottom Hole - 34.6 in - -
    Number of Pockets - 3 - -
    Weight - 12136 lb - -
    Total Operating Weight* - With SU-Blade and Ripper - 111739 lb - -
    Note - * Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes and the noted blade and ripper type. - -
    Overall Beam Width - - 131.1 in -

    Winches
    Winch Model - PA 140VS - -
    Weight* - 3950 lb - -
    Oil Capacity - 4 gal (US) - -
    Drum Width - 12.6 in - -
    Wire Cable Diameter - Recommended - 1.13 in - -
    Wire Cable Diameter - Optional - 1.25 ft - -
    Maximum Drum Capacity - Recommended Cable Length - 257 in - -
    Maximum Drum Capacity - Optional Cable Length - 204 ft - -
    Wire Cable Ferrule Size - Outside Diameter - 2.4 in - -
    Wire Cable Ferrule Size - Length - 2.8 in - -
    Note - *Weight shown is base winch only. Does not include mounting arrangement, control arrangement, oil, or wire rope. With counterweight: 3700 kg (8,150 lb). - -
    Note (2) - Variable speed, hydraulically driven, dual braking system, three-roller fairlead. - -

    Blades
    Semi-Universal (SU)* Capacity - - 35.6 yd³ -
    Semi-Universal (SU)* Width Over Endbits - - 219.8 in -
    U-Blade Capacity - - 45 yd³ -
    U-Blade Width - - 249.6 in -
    Reclamation Universal - Blade capacity (SAE J1265) - - 55 yd³ -
    Reclamation Universal - Width with blade (over end bits) - - 251.8 in -
    Carry Dozer - Blade capacity (SAE J1265) - - 57 yd³ -
    Carry Dozer - Width with blade (over end bits) - - 263.9 in -

    Engine - U.S. EPA Tier 2 Equivalent
    Engine Model - - Cat® C32 -
    Displacement - - 1959 in³ -
    Engine Power - Net SAE J1349/ISO 9249 - Forward - - 850 HP -
    Engine Power - Net SAE J1349/ISO 9249 - Reverse - - 957 HP -
    Note (1) - - *Excludes all fan losses. -
    Note (2) - - Engine ratings apply at 1,800 rpm. -
    Note (3) - - Net power advertised is the power available at the flywheel when the engine is equipped with air cleaner, muffler, alternator, fan, and engine emissions controls as required. -

    Fuel Tank Capacities
    Fuel Tank - Total Volume - - 500 gal (US) -
    Fuel Tank - Usable Volume - - 475 gal (US) -

    Dimensions - D11 Carrydozer
    Width at Outside of Track (710 mm Track Shoe) - - 149.8 in -
    Length with SU-Blade** - No rear attachment - - 345.1 in -
    Overall Length SU-Blade and SS Ripper** - - 421.7 in -

    Dimensions - D11
    Ground Clearance* - - 31.4 in -
    Track Gauge - - 114 in -
    Width at Outside of Track (710 mm Track Shoe) - - 142 in -
    Height (ROPS/canopy)* - - 185.9 in -
    Length of Track on Ground - - 175 in -
    Length with SU-Blade** - No rear attachment - - 337.8 in -
    Overall Length SU-Blade and SS Ripper** - - 414.4 in -
    Note - - *Includes grouser height for total dimensions on hard surfaces. -

    Engine
    Engine Model - - - Cat® C3.6
    Power - Net - - - 104 HP
    Displacement - - - 220 in³
    Net Power - 2,200 rpm - SAE J1349 - - - 104 HP
    Net Power - 2,200 rpm - ISO 9249/EEC 80/1269 - - - 104 HP
    Note (1) - - - Net power is tested per ISO 9249:2007 and SAE J1349:2011 and as advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system and alternator.
    Power Train - - - Hydrostatic
    Note (2) - - - All non-road U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final) and Korea Tier 4 Final diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm EPA/10 ppm EU (mg/kg) sulfur or less.

    Ripper
    Type - - - Parallelogram
    Number of Shanks - - - 3
    Height - - - 6.5 in
    Weight - - - 1222 lb
    Maximum Digging Depth - - - 13.3 in
    Maximum Reach - Ground Line - - - 30.2 in
    Overall Width - - - 67.3 in
    Maximum Ground Clearance Under Tip - - - 17.6 in

    Dimensions
    BLADE: Blade Width - LGP - - - 126.7 in
    Track Gauge - LGP, 762 mm (30 in) - - - 73 in
    BLADE: Digging Depth - LGP - - - 23.2 in
    Track Gauge - LGP - - - 67.9 in
    BLADE: Blade Capacity (SAE) - LGP - - - 3.06 yd³
    BLADE: Blade Width at Maximum Angle - LGP - - - 115.8 in
    BLADE: Blade Cutting Edge Angle, Adjustable - LGP - - - 52° to 58°
    Ground Clearance - LGP, 762 mm (30 in) - - - 13 in
    BLADE: Blade Height - LGP - - - 39.8 in
    BLADE: Blade Lift Height - LGP - - - 30.2 in
    Ground Clearance - LGP - - - 13 in
    Overall Length - With Blade - LGP, 762 mm (30 in) - - - 169.6 in
    Overall Length - With Blade - LGP - - - 169.6 in
    Note - - - Abrasion Undercarriage
    BLADE: Maximum Tilt - LGP - - - 17.7 in
    BLADE: Maximum Angle (either side) - LGP - - - 25°
    BLADE: Blade Capacity (SAE) - Standard - - - 2.86 yd³
    Track Gauge - Standard - - - 63 in
    BLADE: Digging Depth - Standard - - - 23.8 in
    BLADE: Blade Lift Height - Standard - - - 30.2 in
    Ground Clearance - Standard - - - 13 in
    Overall Length - With Blade - Standard - - - 170.7 in
    BLADE: Blade Cutting Edge Angle, Adjustable - Standard - - - 52° to 58°
    BLADE: Blade Height - Standard - - - 42.2 in
    BLADE: Maximum Tilt - Standard - - - 15.8 in
    BLADE: Blade Width - Standard - - - 109.5 in
    BLADE: Blade Width at Maximum Angle - Standard - - - 103.8 in
    BLADE: Maximum Angle (either side) - Standard - - - 25°
    Length of Basic Dozer (without blade) - Standard - - - 128.7 in
    Dozer Height - Standard - - - 109 in
    Width of Dozer (standard shoes, no blade) - LGP - - - 92.9 in
    Width of Dozer (standard shoes, no blade) - LGP, 762 mm (30 in) - - - 103.5 in
    Length of Basic Dozer (without blade) - LGP - - - 128.7 in
    Dozer Height - LGP, 762 mm (30 in) - - - 109 in
    Width of Dozer (standard shoes, no blade) - Standard - - - 83 in
    Length of Basic Dozer (without blade) - LGP, 762 mm (30 in) - - - 128.7 in
    Dozer Height - LGP - - - 109 in

    Cab
    ROPS - - - ISO 3471:2008
    FOPS - - - ISO 3449:2005 Level II

    Retrieval Winch
    Maximum Line Pull - Bare Drum - - - 32150 lb
    Control - - - Hydraulic
    Rope Diameter - Optional - - - 0.75 in
    Drum Capacity - Optional Cable - - - 195 ft
    Maximum Line Speed - Full Drum - - - 79 ft/min
    Drum Capacity - Recommended Cable - - - 277 ft
    Winch Drive - - - Hydraulic
    Weight - - - 1747 lb
    Maximum Line Pull - Full Drum - - - 20350 lb
    Rope Diameter - Recommended - - - 0.63 in
    Maximum Line Speed - Bare Drum - - - 50 ft/min
    Speed - - - Variable
    Winch Length - - - 35.63 in
    Drum Diameter - - - 8 in
    Overall width - - - 27.91 in
    Drum Width - - - 9.65 in
    Throat Clearance - - - 5.6 in

    High Performance Winch
    Winch length - - - 27.76 in
    Rope diameter – optional - - - 0.75 in
    Maximum line speed – bare drum - - - 131 ft/min
    Maximum line pull – bare drum - - - 40000 lb
    Weight - - - 1345 lb
    Drum capacity – optional - - - 256 ft
    Maximum line speed – full drum - - - 207 ft/min
    Rope diameter – recommended - - - 0.63 in
    Winch drive - - - Hydrostatic
    Throat clearance - - - 6.75 in
    Drum diameter - - - 10 in
    Overall width - - - 29.2 in
    Drum width - - - 10.8 in
    Maximum line pull – full drum - - - 25000 lb
    Speed - - - Variable
    Drum capacity – recommended cable - - - 371 ft
    Control - - - Hydraulic
    Add a Similar Product: