CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    24 Motor Grader
    View Product
    140 Motor Grader LVR
    View Product Remove
    18 Motor Grader
    View Product Remove
    120 - 2019 - N Am, Global
    View Product Remove

    Engine
    Net Power - EEC 80/1269 535 HP 250 HP - -
    Bore 5.4 in 4.5 in 5.1 in 4.1 in
    Stroke 6 in 5.9 in 6.2 in 5.3 in
    Note (1) Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 Standards in effect at the time of manufacture. - - Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 Standards in effect at the time of manufacture."
    Note (3) Net power advertised is the power available at rated speed of 1,800 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator. - - Power as declared per ISO 14396
    Note (2) Optimized VHP Plus is standard for the 24. - - Net power advertised is the power available at rated speed of 2,000 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator.
    Standard Capability 122 °F 109 °F - 122 °F
    Emissions Tier 4 Final/Stage IV or Equivalent to Tier 2/Stage II U.S. EPA Tier 4 Final/EU Stage V - U.S. EPA Tier 4 Final/EU Stage V - U.S. EPA Tier 3/EU Stage IIIA
    Note (4) Power as declared per ISO 14396. Rated rpm 1,800 (561 hp) - - -
    Engine Model Cat C27 Cat C9.3 Cat® C13 Cat 7.1
    Displacement 1648 in³ 567.5 in³ 763 in³ 427.8 in³
    Number of Cylinders 12 6 6 6
    Net Power - ISO 9249/SAE J1349 - 250 HP - -
    Engine RPM - 2,000 - 2,000
    Torque Rise - ISO 9294 - 44% - 42%
    Base Power (1st Gear) - Net - - 304 HP -
    Speed at Rated Power - - 2,000 rpm -
    Standard - Ambient Capability - - 122 °F -
    Base Power (1st Gear) - Net - Metric - - 309 HP -
    VHP Range - Net - - 227-266 kW (304-357 hp) -
    Maximum Torque - ISO 9249 - Tier 2/Stage II/Japan 2001 (Tier 2) Equivalent - - 1270 lb/ft -
    Derating Altitude - Tier 2/Stage II/Japan 2001 (Tier 2) Equivalent - - 12176 ft -
    Derating Altitude - Tier 3/Stage IIIA/Japan 2006 (Tier 3) Equivalent - - 12973 ft -
    Maximum Torque - ISO 9249 - Tier 3/Stage IIIA/Japan 2006 (Tier 3) Equivalent - - 1270 lb/ft -
    Standard - Fan Speed - Minimum - - 550 rpm -
    Emissions (1) - - U.S. EPA Tier 4 Final/EU Stage V/Japan 2014 (Tier 4 Final) -
    Torque Rise - Tier 4/Stage IV/Japan 2014 (Tier 4 Final) - - 40% -
    Maximum Torque - ISO 9249 - Tier 4/Stage IV/Japan 2014 (Tier 4 Final) - - 1306 lb/ft -
    Derating Altitude - Tier 4/Stage IV/Japan 2014 (Tier 4 Final) - - 12500 ft -
    Torque Rise - Tier 2/Stage II/Japan 2001 (Tier 2) Equivalent - - 38% -
    Standard - Fan Speed - Maximum - - 1,450 rpm -
    Emissions (2) - - Tier 3/Stage IIIA/Japan 2006 (Tier 3) Equivalent Emission Standards -
    Torque Rise - Tier 3/Stage IIIA/Japan 2006 (Tier 3) Equivalent - - 38% -
    VHP Range - Net - Metric - - 227-266 kW (309-362 hp) -
    Emissions (3) - - Tier 2/Stage II/Japan 2001 (Tier 2) Equivalent Emission Standards -
    Optimized VHP Range - Net - - 227-266 kW (304-357 hp) -
    Derating Altitude - - - 9842.5 ft
    Maximum Torque - ISO 9249 - - - 606 lb/ft
    All-Wheel Drive Net Power Range (Tier 3) - - - 130 HP
    Net Power Range (Tier 3) - - - 130 HP
    Maximum Torque - AWD On - - - 611 lb/ft
    Derating Altitude (AWD) - - - 5499 ft

    Weights
    Operating Weight - Typically Equipped 165314 lb 20236 lb 74324 lb 35067 lb

    Moldboard
    Blade Width 24 ft 12 ft 18 ft 12 ft
    Blade Height 40 in - - 24 in
    Cutting Edge - 6 in - 6 in
    Arc Radius - 16.3 in 16.3 in 16.3 in
    Throat Clearance - 6.5 in 5 in 4.1 in
    End Bit - 6 in - 6 in
    Down Force - Maximum GVW - - 43861 lb -
    Blade Pull* - Base GVW - - 47216 lb -
    Blade Pull* - Maximum GVW - - 52878 lb -
    End Bit - Width - - 6 in -
    Down Force - Base GVW - - 34008 lb -
    Cutting Edge Thickness - - 1.4 in -
    Thickness - - 1 in -
    Width - - 18 ft -
    Cutting Edge Width - - 10 in -
    End Bit - Thickness - - 0.75 in -
    Height - - 31 in -
    Note - - *Blade pull calculated at 0.9 traction coefficient, which is equal to ideal no-slip conditions, and Gross Machine Weight. -

    Blade Range
    Maximum Depth of Cut 21.7 in 28.9 in 18.5 in 30.5 in
    Maximum Lift Above Ground 16.1 in 18.9 in 15.7 in 16.1 in
    Maximum Blade Position Angle - - 65° -
    Maximum Shoulder Reach Outside of Tires - Right - - 103 in -
    Circle Centershift - Right - - 22 in -
    Maximum Shoulder Reach Outside of Tires - Left - - 103 in -
    Moldboard Sideshift - Right - - 31.1 in -
    Blade Tip Range - Backward - - 5° -
    Moldboard Sideshift - Left - - 29.1 in -
    Circle Centershift - Left - - 27.2 in -
    Blade Tip Range - Forward - - 40° -
    Blade Tip Range Forward - - - 40
    Maximum Shoulder Reach Right - - - 76 in
    Moldboard Side Shift Right - - - 26.1 in
    Maximum Shoulder Reach Left - - - 69.4 in
    Moldboard Side Shift Left - - - 20.1 in
    Circle Center Shift Left - - - 26 in
    Blade Tip Range Backward - - - 5
    Circle Center Shift Right - - - 26 in

    Machine Weight
    Weight* 161695 lb 42325 lb - -
    Note - *Typically equipped with push block and ripper. - -
    All-Wheel Drive (AWD) Weight - 44613 lb - -
    Lever/Steering Wheel All-Wheel drive (AWD) Weight* Tier 4 - - - 36731 lb
    Note (1) - - - *Typically equipped includes 4267 mm (14 ft) plus blade, tires, push plate, ripper, bottom guard, operator, and full fluids.
    Joystick Weight* Tier 4 - - - 35358 lb
    Joystick All-Wheel Drive (AWD) Weight* Tier 4 - - - 36846 lb
    Lever/Steering Wheel Weight* Tier 4 - - - 35067 lb

    Dimensions
    Basic Blade Width - 140 in - 12 ft
    Length of Machine* - 397.6 in - 387 in
    Width - 97.6 in - 102 in
    Note - *Typically equipped with push block and ripper. - *Typically equipped with push block and ripper.
    Maximum Height - 132 in - 136.4 in
    Width All Wheel Drive (AWD) - - - 2551 mm

    Service Refill
    Hydraulic System - 14.5 gal (US) - -
    Engine Crankcase - 7.9 gal (US) - -
    Circle Drive - 1.8 gal (US) - -
    Fuel Tank - 100 gal (US) - -
    Front Wheel Spindle Bearing - Each - 0.13 gal (US) - -
    Fuel Capacity - - 131 gal (US) -
    Cooling System - - 18.5 gal (US) -
    Hydraulic System - Tank - - 18.5 gal (US) -
    Hydraulic System - Total - - 38.6 gal (US) -
    DEF Tank - - 4.2 gal (US) -
    Engine Oil - - 9.5 gal (US) -
    Transmission - Differential - Final Drives - - 26 gal (US) -
    Tandem Housing - Each - - 34 gal (US) -
    Front Wheel Spindle Bearing Housing - - 0.24 gal (US) -
    Circle Drive Housing - - 2.6 gal (US) -

    Power Train
    Forward/Reverse Gears - - 8 Forward/6 Reverse -
    Transmission - - Direct drive, power shift, countershaft -
    Brakes - Parking - - Spring applied, hydraulically released -
    Brakes - Dynamic Brake Torque per Wheel - - 27069.27 lb/ft -
    Brakes - Service - - Oil-actuated, oil disc -
    Brakes - Secondary - - Oil-actuated, oil-disc -

    Hydraulic System
    Circuit Type - - Electro-hydraulic load sensing, closed center -
    Pump Type - - Variable piston -
    Maximum System Pressure - - 3590 psi -
    Standby Pressure - - 856 psi -
    Pump Output* - - 74 gal/min -
    Note - - *Pump output measured at 2,150 rpm. -

    Operating Specifications
    Forward - 6th - - 16 mile/h -
    Forward - 2nd - - 3.8 mile/h -
    Forward - 8th - - 32.1 mile/h -
    Forward - 5th - - 11.8 mile/h -
    Reverse - 3rd - - 6 mile/h -
    Turning Radius - Outside Front Tires - - 30.5 ft -
    Forward - 4th - - 7.6 mile/h -
    Top Speed - Reverse - - 25.3 mile/h -
    Forward - 7th - - 22 mile/h -
    Articulation Angle - Left/Right - - 20° -
    Reverse - 1st - - 2.2 mile/h -
    Forward - 3rd - - 5.5 mile/h -
    Reverse - 4th - - 9.3 mile/h -
    Forward - 1st - - 2.8 mile/h -
    Top Speed - Forward - - 32.1 mile/h -
    Reverse - 6th - - 25.3 mile/h -
    Steering Range - Left/Right - - 47.5° -
    Reverse - 2nd - - 4.1 mile/h -
    Reverse - 5th - - 17.4 mile/h -
    Note - - Calculated with no slip and 23.5R25 L-3 tires. -

    Frame
    Front Frame Structure - Width - - 14 in -
    Front Axle - Height to Center - - 26.4 in -
    Circle - Diameter - - 71.7 in -
    Front Frame Structure - Thickness - - 0.6 in -
    Front Frame Structure - Height - - 18.1 in -
    Circle - Blade Beam Thickness - - 2 in -
    Drawbar - Width - - 3 in -
    Front Axle - Wheel Lean - - 18° Left/17° Right -
    Front Axle - Total Oscillation per Side - - 35° -
    Drawbar - Height - - 8 in -

    Tandems
    Sidewall Thickness - Outer - - 0.9 in -
    Sidewall Thickness - Inner - - 0.9 in -
    Tandem Oscillation - Front Up - - 15° -
    Tandem Oscillation - Front Down - - 25° -
    Height - - 25.5 in -
    Width - - 9.3 in -
    Drive Chain Pitch - - 2.5 in -
    Wheel Axle Spacing - - 72.5 in -

    Ripper
    Shank Holder Spacing - Minimum - - 17.5 in -
    Ripping Depth - Maximum - - 17.8 in -
    Shank Holder Spacing - Maximum - - 20 in -
    Ripper Shank Holders - - 7 -
    Penetration Force - - 30311 lb -
    Pry-Out Force - - 43700 lb -
    Machine Length Increase, Beam Raised - - 63.4 in -

    Weights Tier 4 Final/Stage IV/Japan 2014 (Tier 4 Final)*
    Gross Vehicle Weight - Typically Equipped - Rear Axle - - 53830 lb -
    Gross Vehicle Weight - Base** - Total - - 72298 lb -
    Gross Vehicle Weight - Maximum Tested - Rear Axle - - 58753 lb -
    Gross Vehicle Weight - Maximum Tested - Front Axle - - 26125 lb -
    Gross Vehicle Weight - Typically Equipped - Front Axle - - 20494 lb -
    Gross Vehicle Weight - Base** - Front Axle - - 19837 lb -
    Gross Vehicle Weight - Maximum Tested - Total - - 84877 lb -
    Gross Vehicle Weight - Typically Equipped - Total - - 74324 lb -
    Gross Vehicle Weight - Base** - Rear Axle - - 52461 lb -
    Note (2) - - **Base operating weight calculated on standard machine configuration with 23.5R25 tires, full fuel tank operator and rops cab. -
    Note (1) - - *No Tier 4 Final/Stage IV/Japan 2014 (Tier 4 Final) emission engine: subtract 150 kg (331 lb) from rear axle wt. & total wt. -

    Dimensions (Approximate)
    Height - Top of Cylinders - - 122.6 in -
    Width - Outside Rear Tires - - 134.3 in -
    Height - Exhaust Stack - - 141.1 in -
    Length - Between Tandem Axles - - 72.5 in -
    Length - Front Axle to Mid Tandem - - 290 in -
    Width - Tire Center Lines - - 106.4 in -
    Length - Front Axle to Moldboard - - 120.7 in -
    Length - Counterweight to Ripper - - 474.4 in -
    Height - Front Axle Center - - 29.9 in -
    Width - Outside Front Tires - - 134.3 in -
    Length - Front Tire to Rear of Machine - Including Tow Hitch - - 417 in -
    Height - Top of Cab - - 147.5 in -
    Ground Clearance - Rear Axle - - 16.7 in -

    Standards
    Sound - - ISO 6394: 2008/ISO 6395: 2008/ISO 6396: 2008 -
    ROPS/FOPS - - ISO 3471: 2008/ISO 3449: 2005 -
    Brakes - - ISO 3450: 2011 -
    Steering - - ISO 5010: 2007 -

    Variable Power Tier 4 Final/Stage IV/Japan 2014 (Tier 4 Final), Tier 3/Stage IIIA/Japan 2006 (Tier 3) Equivalent or Tier 2/Stage II/Japan 2001 (Tier 2) Equivalent Emission Standards - Metric
    Gear - Forward 1st - - 309 HP -
    Gear - Forward 2nd - - 309 HP -
    Gear - Reverse 2nd - - 309 HP -
    Gear - Forward 4th - - 325 HP -
    Gear - Forward 6th - - 341 HP -
    Gear - Forward 5th - - 332 HP -
    Gear - Forward 8th - - 362 HP -
    Gear - Reverse 1st - - 309 HP -
    Gear - Forward 3rd - - 315 HP -
    Gear - Forward 7th - - 347 HP -
    Gear - Reverse 3rd-6th - - 315 HP -

    Optional Tire Arrangements
    Wheel Group - 19.5×25 MP (2) - - Tires: 23.5R25 Bridgestone VKT 1 Star -
    Wheel Group - 19.5×25 MP (1) - - Tires: 23.5R25 Bridgestone VKT 2 Star -
    Wheel Group - 19.5×25 MP (3) - - Tires: 23.5R25 Bridgestone VJT 1 Star -
    Wheel Group - 19.5×25 MP (4) - - Tires: 23.5R25 Michelin XHA 2 Star -
    Wheel Group - 19.5×25 MP (5) - - Tires: 23.5R25 Michelin XLDD 2 Star L5 -

    Variable Power Tier 4 Final/Stage IV/Japan 2014 (Tier 4 Final), Tier 3/Stage IIIA/Japan 2006 (Tier 3) Equivalent or Tier 2/Stage II/Japan 2001 (Tier 2) Equivalent Emission Standards - Net
    Gear - Forward 4th - - 321 HP -
    Gear - Reverse 2nd - - 304 HP -
    Gear - Forward 1st - - 304 HP -
    Gear - Reverse 3rd-6th - - 311 HP -
    Gear - Forward 3rd - - 311 HP -
    Gear - Forward 5th - - 327 HP -
    Gear - Forward 7th - - 342 HP -
    Gear - Forward 2nd - - 304 HP -
    Gear - Reverse 1st - - 304 HP -
    Gear - Forward 6th - - 337 HP -
    Gear - Forward 8th - - 357 HP -

    Service Refill Capacities
    Transmission and Differential - - - 9 gal (US)
    Circle Drive - - - 1.8 gal (US)
    Fuel Tank - - - 65 gal (US)
    Cooling System - - - 14 gal (US)
    Engine Crankcase - - - 4.8 gal (US)
    Diesel Exhaust Fluid Tank (Tier 4 Only) - - - 5 gal (US)
    Hydraulic System - - - 25.6 gal (US)

    Air Conditioning System
    Note - - - The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.6 kg of refrigerant which has a carbon dioxide equivalent of 2.288 metric tonnes.
    Add a Similar Product: