CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    24 Motor Grader
    View Product
    120 - 2019 - N Am, Global
    View Product Remove
    160 Motor Grader
    View Product Remove
    150 Motor Grader
    View Product Remove

    Engine
    Net Power - EEC 80/1269 535 HP - - -
    Bore 5.4 in 4.1 in 4.5 in 4.5 in
    Stroke 6 in 5.3 in 5.9 in 5.9 in
    Note (1) Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 Standards in effect at the time of manufacture. Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 Standards in effect at the time of manufacture." - -
    Note (3) Net power advertised is the power available at rated speed of 1,800 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator. Power as declared per ISO 14396 - -
    Note (2) Optimized VHP Plus is standard for the 24. Net power advertised is the power available at rated speed of 2,000 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator. - -
    Standard Capability 122 °F 122 °F 109 °F 109 °F
    Emissions Tier 4 Final/Stage IV or Equivalent to Tier 2/Stage II U.S. EPA Tier 4 Final/EU Stage V - U.S. EPA Tier 3/EU Stage IIIA U.S. EPA Tier 4 Final/EU Stage V U.S. EPA Tier 4 Final/EU Stage V
    Note (4) Power as declared per ISO 14396. Rated rpm 1,800 (561 hp) - - -
    Engine Model Cat C27 Cat 7.1 Cat® C9.3 Cat® C9.3
    Displacement 1648 in³ 427.8 in³ 567.5 in³ 567.5 in³
    Number of Cylinders 12 6 6 6
    Derating Altitude - 9842.5 ft 10000 ft 10000 ft
    Maximum Torque - ISO 9249 - 606 lb/ft - -
    All-Wheel Drive Net Power Range (Tier 3) - 130 HP - -
    Net Power Range (Tier 3) - 130 HP - -
    Engine RPM - 2,000 - -
    Maximum Torque - AWD On - 611 lb/ft - -
    Derating Altitude (AWD) - 5499 ft - -
    Torque Rise - ISO 9294 - 42% - -
    Base Power (1st Gear) - Net - - 221 HP -
    Speed at Rated Power - - 2,000 rpm 2,000 rpm
    VHP Plus - Gear - Net Power - Forward 1st - - 221 HP 200 HP
    Torque Rise - - 39% 39%
    VHP Plus - Gear - Net Power - Forward 8th - - 272 HP 252 HP
    VHP Plus - Gear - Net Power - Forward 3rd - - 241 HP 220 HP
    VHP Plus - Gear - Net Power - Forward 4th - - 252 HP 231 HP
    VHP Plus - Gear - Net Power - Forward 2nd - - 231 HP 210 HP
    VHP Plus - Gear - Net Power - Forward 6th - - 262 HP 241 HP
    Maximum Torque - VHP Plus - - 1000 lb/ft 920 lb/ft
    VHP Plus Range - Net - - 165-203 kW (221-272 hp) 149-188 kW (200-252 hp)
    VHP Plus - Gear - Net Power - Forward 7th - - 267 HP 247 HP
    VHP Plus - Gear - Net Power - Reverse 1st - - 221 HP 200 HP
    Base Power (1st Gear) - Net - Metric - - 224 HP 202 HP
    High Ambient - Fan Speed - Standard - - 1,400 rpm 1,400 rpm
    VHP Plus - Gear - Net Power - Forward 5th - - 257 HP 236 HP
    VHP Plus - Gear - Net Power - Reverse 2nd - - 231 HP 210 HP
    VHP Plus Range - Net - Metric - - 165-203 kW (224-276 hp) 149-188 kW (202-255 hp)
    VHP Plus - Gear - Net Power - Reverse 3rd-6th - - 241 HP 220 HP
    High Ambient - Fan Speed - Maximum - - 1,550 rpm 1,550 rpm
    High Ambient - Fan Speed - Minimum - - 500 rpm 500 rpm
    High - Ambient Capability - - 122 °F 122 °F
    Net Power Range (Tier 4) - - - 200 HP

    Weights
    Operating Weight - Typically Equipped 165314 lb 35067 lb 45547 lb 43950 lb
    Gross Vehicle Weight - Maximum - Rear Axle - - 38069 lb 38069 lb
    Gross Vehicle Weight - Base - Front Axle - - 9907 lb 9601 lb
    Gross Vehicle Weight - Base - Rear Axle - - 28812 lb 28590 lb
    Gross Vehicle Weight - Maximum - Total - - 55144 lb 55144 lb
    Operating Weight - Typically Equipped - Front Axle - - 13237 lb 12549 lb
    Gross Vehicle Weight - Base - Total - - 38719 lb 38191 lb
    Gross Vehicle Weight - Maximum - Front Axle - - 17075 lb 17075 lb
    Operating Weight - Typically Equipped - Total - - 45547 lb 43950 lb
    Operating Weight - Typically Equipped - Rear Axle - - 32310 lb 31401 lb

    Moldboard
    Blade Width 24 ft 12 ft 14 ft 12 ft
    Blade Height 40 in 24 in - -
    Throat Clearance - 4.1 in 6.5 in 6.5 in
    End Bit - 6 in - -
    Cutting Edge - 6 in - -
    Arc Radius - 16.3 in 16.3 in 16.3 in
    Moldboard - Height - - 24 in 24 in
    Moldboard - Thickness - - 0.87 in 0.87 in
    Cutting Edge Width - - 6 in 6 in
    Cutting Edge Thickness - - 0.6 in 0.6 in
    End Bit - Width - - 6 in 6 in
    End Bit - Thickness - - 0.6 in 0.6 in
    Blade Pull - Base GVW - - 25931 lb 25732 lb
    Blade Pull - Maximum GVW - - 34262 lb 34262 lb
    Blade Down Pressure - Base GVW - - 17004 lb 16480 lb
    Blade Down Pressure - Maximum GVW - - 29308 lb 29308 lb
    Moldboard - Blade Width - - 14 ft 12 ft

    Blade Range
    Maximum Depth of Cut 21.7 in 30.5 in 29.5 in 28.1 in
    Maximum Lift Above Ground 16.1 in 16.1 in 17.8 in 18.9 in
    Blade Tip Range Forward - 40 - -
    Maximum Shoulder Reach Right - 76 in - -
    Moldboard Side Shift Right - 26.1 in - -
    Maximum Shoulder Reach Left - 69.4 in - -
    Moldboard Side Shift Left - 20.1 in - -
    Circle Center Shift Left - 26 in - -
    Blade Tip Range Backward - 5 - -
    Circle Center Shift Right - 26 in - -
    Circle Centershift - Right - - 28.7 in 28.7 in
    Circle Centershift - Left - - 27.4 in 27.4 in
    Moldboard Sideshift - Right - - 26 in 26 in
    Moldboard Sideshift - Left - - 20.1 in 20.1 in
    Maximum Blade Position Angle - - 90° 90°
    Blade Tip Range - Forward - - 40° 40°
    Blade Tip Range - Backward - - 5° 5°
    Maximum Shoulder Reach Outside of Tires - Left - - 82.3 in 70.5 in
    Maximum Shoulder Reach Outside of Tires - Right - - 89.7 in 77.9 in

    Machine Weight
    Weight* 161695 lb - - -
    Lever/Steering Wheel All-Wheel drive (AWD) Weight* Tier 4 - 36731 lb - -
    Note (1) - *Typically equipped includes 4267 mm (14 ft) plus blade, tires, push plate, ripper, bottom guard, operator, and full fluids. - -
    Joystick Weight* Tier 4 - 35358 lb - -
    Joystick All-Wheel Drive (AWD) Weight* Tier 4 - 36846 lb - -
    Lever/Steering Wheel Weight* Tier 4 - 35067 lb - -

    Service Refill Capacities
    Transmission and Differential - 9 gal (US) - -
    Circle Drive - 1.8 gal (US) - -
    Fuel Tank - 65 gal (US) - -
    Cooling System - 14 gal (US) - -
    Engine Crankcase - 4.8 gal (US) - -
    Diesel Exhaust Fluid Tank (Tier 4 Only) - 5 gal (US) - -
    Hydraulic System - 25.6 gal (US) - -

    Air Conditioning System
    Note - The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.6 kg of refrigerant which has a carbon dioxide equivalent of 2.288 metric tonnes. - -
    Air Conditioning - - The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes. The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes.

    Dimensions
    Maximum Height - 136.4 in - -
    Length of Machine* - 387 in - -
    Width All Wheel Drive (AWD) - 2551 mm - -
    Width - 102 in - -
    Note - *Typically equipped with push block and ripper. - -
    Basic Blade Width - 12 ft - -
    Height - Top of Cab - - 130 in 130 in
    Length - Counterweight to Ripper - - 399 in 399 in
    Width - Outside Front Tires - - 98.9 in 98.9 in
    Length - Front Axle to Mid Tandem - - 241 in 241 in
    Length - Front Tire to Rear of Machine - - 351 in 351 in
    Length - Front Axle to Moldboard - - 100 in 100 in
    Length - Between Tandem Axles - - 60 in 60 in
    Width - Outside Rear Tires - - 98.9 in 98.9 in
    Width - Tire Center Lines - - 84.3 in 84.3 in
    Height - Front Axle Center - - 23.5 in 23.5 in
    Height - Exhaust Stack - - 128 in 128 in
    Height - Top of Cylinders - - 120 in 120 in
    Ground Clearance - Rear Axle - - 13.3 in 13.3 in

    Operating Specifications
    Top Speed - Forward - - 29.5 mile/h 29 mile/h
    Top Speed - Reverse - - 23.3 mile/h 23 mile/h
    Turning Radius - Outside Front Tires - - 25.59 ft 25.59 ft
    Steering Range - Left/Right - - 50° 50°
    Articulation Angle - Left/Right - - 20° 20°
    Forward - 1st - - 2.6 mile/h 2.5 mile/h
    Forward - 2nd - - 3.5 mile/h 3.4 mile/h
    Forward - 3rd - - 5.1 mile/h 5 mile/h
    Forward - 4th - - 7 mile/h 6.9 mile/h
    Forward - 5th - - 10.8 mile/h 10.6 mile/h
    Forward - 6th - - 14.7 mile/h 14.5 mile/h
    Forward - 7th - - 20.3 mile/h 19.9 mile/h
    Forward - 8th - - 29.5 mile/h 29 mile/h
    Reverse - 1st - - 2 mile/h 2 mile/h
    Reverse - 2nd - - 3.8 mile/h 3.7 mile/h
    Reverse - 3rd - - 5.5 mile/h 5.4 mile/h
    Reverse - 4th - - 8.5 mile/h 8.4 mile/h
    Reverse - 5th - - 16 mile/h 15.7 mile/h
    Reverse - 6th - - 23.3 mile/h 23 mile/h

    Service Refill
    Fuel Capacity - - 104 gal (US) 104 gal (US)
    Cooling System - - 15 gal (US) 15 gal (US)
    Hydraulic System - Total - - 26.4 gal (US) 26.4 gal (US)
    Hydraulic System - Tank - - 16.9 gal (US) 16.9 gal (US)
    Transmission - Differential - Final Drives - - 18.5 gal (US) 18.5 gal (US)
    Diesel Exhaust Fluid - - 5.8 gal (US) 5.8 gal (US)
    Engine Oil - - 7.9 gal (US) 7.9 gal (US)
    Tandem Housing - Each - - 22.9 gal (US) 20 gal (US)
    Front Wheel Spindle Bearing Housing - - 0.13 gal (US) 0.13 gal (US)
    Circle Drive Housing - - 1.8 gal (US) 1.8 gal (US)

    Power Train
    Forward/Reverse Gears - - 8 Forward/6 Reverse 8 Forward/6 Reverse
    Transmission - - APECS, Direct Drive, Powershift APECS, Direct Drive, Powershift
    Brakes - Service - - Multiple Oil Disc Multiple Oil Disc
    Brakes - Service - Surface Area - - 3565 in² 3565 in²
    Brakes - Parking - - Multiple Oil Disc Multiple Oil Disc
    Brakes - Secondary - - Dual Circuit Control Dual Circuit

    Hydraulic System
    Circuit Type - - Parallel Parallel
    Pump Type - - Variable Piston Variable Piston
    Pump Output - - 55.5 gal/min 55.7 gal/min
    Maximum System Pressure - - 3503 psi 3500 psi
    Reservoir Tank Capacity - - 16.9 gal (US) 16.9 gal (US)
    Standby Pressure - - 885 psi 885 psi

    Frame
    Drawbar - Width - - 3 in 3 in
    Circle - Diameter - - 61.1 in 60.2 in
    Circle - Blade Beam Thickness - - 1.6 in 1.6 in
    Drawbar - Height - - 6 in 6 in
    Front Frame Structure - Width - - 12 in 12 in
    Circle - Height - - 6.3 in 5.4 in
    Front Frame Structure - Height - - 12.6 in 12.6 in
    Drawbar - Thickness - - 0.5 in 0.5 in
    Front-Top/Bottom Plate - Width - - 12 in 12 in
    Front-Top/Bottom Plate - Thickness - - 0.87 in 0.87 in
    Front Axle - Height to Center - - 23.5 in 23.5 in
    Front Axle - Wheel Lean - Left/Right - - 18° 18°
    Front Axle - Total Oscillation per Side - - 32° 32°

    Ripper
    Ripping Depth - Maximum - - 16.8 in 16.8 in
    Ripper Shank Holder Spacing - - 21 in 21 in
    Ripper Shank Holders - - 5 5
    Penetration Force - - 20812 lb 20812 lb
    Pry-Out Force - - 28493 lb 27794 lb
    Machine Length Increase, Beam Raised - - 40.6 in 40.6 in

    Scarifier
    Front, V-Type, 5 or 11 Tooth - Scarifier Shank Holder Spacing - - 4.6 in 4.6 in
    Front, V-Type, 5 or 11 Tooth - Scarifying Depth, Maximum - - 18.4 in 18.4 in
    Mid, V-Type - Working Width - - 46.6 in 46.6 in
    Rear - Scarifying Depth, Maximum - - 16.8 in 16.8 in
    Front, V-Type - Working Width - - 47.4 in 47.4 in
    Mid, V-Type - Scarifier Shank Holder Spacing - - 4.6 in 4.6 in
    Mid, V-Type - Scarifying Depth, Maximum - - 11.5 in 11.5 in
    Front, V-Type, 5 or 11 Tooth - Scarifier Shank Holders - - 5/11 11-May
    Front, V-Type, 5 or 11 Tooth - Working Width - - 40.6 in 40.6 in
    Mid, V-Type - Scarifier Shank Holders - - 11 11
    Rear - Working Width - - 84 in 84 in
    Rear - Scarifier Shank Holders - - 9 9
    Rear - Scarifier Shank Holder Spacing - - 10.5 in 10.5 in

    Standards
    Brakes - - ISO 3450 ISO 3450
    ROPS/FOPS - - ISO 3471; ISO 3449 ISO 3471/ISO 3449
    Steering - - ISO 5010 ISO 5010
    Sound - - ISO 6394; ISO 6395 ISO 6394; ISO 6395

    Tandems
    Height - - 22.5 in 19.9 in
    Width - - 8 in 7.9 in
    Sidewall Thickness - Inner - - 0.69 in 0.63 in
    Sidewall Thickness - Outer - - 0.71 in 0.71 in
    Drive Chain Pitch - - 2 in 2 in
    Wheel Axle Spacing - - 60 in 60 in
    Tandem Oscillation - Front Up - - 15° 15°
    Tandem Oscillation - Front Down - - 25° 25°
    Add a Similar Product: