CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    16 Motor Grader
    View Product
    140/140 AWD Motor Grader
    View Product Remove
    160 Motor Grader
    View Product Remove

    Engine
    Base Power (1st Gear) - Net 290 HP - 221 HP
    Engine Model Cat® C13 Cat® C9.3 Cat® C9.3
    Bore 5.1 in 4.5 in 4.5 in
    Stroke 6.2 in 5.9 in 5.9 in
    Speed at Rated Power 2,000 rpm 2,000 rpm 2,000 rpm
    Optimized VHP Range - Net 216-259 kW (290-348 hp) - -
    Derating Altitude - Tier 2/Stage II/Japan 2001 (Tier 2) Equivalent 12176 ft - -
    Maximum Torque - ISO 9249 - Tier 3/Stage IIIA/Japan 2006 (Tier 3) Equivalent 1270 lb/ft - -
    Maximum Torque - ISO 9249 - Tier 4/Stage IV/Japan 2014 (Tier 4) 1306 lb/ft - -
    Maximum Torque - ISO 9249 - Tier 2/Stage II/Japan 2001 (Tier 2) Equivalent 1270 lb/ft - -
    Emissions (2) Tier 3/Stage IIIA/Japan 2006 (Tier 3) Equivalent Emission Standards – depending on emission standards of specific country - -
    Torque Rise - Tier 4/Stage IV/Japan 2014 (Tier 4) 43% - -
    Torque Rise - Tier 2/Stage II/Japan 2001 (Tier 2) Equivalent 39% - -
    Standard - Ambient Capability 122 °F - -
    Derating Altitude - Tier 3/Stage IIIA/Japan 2006 (Tier 3) Equivalent 12973 ft - -
    VHP Range - Net - Metric 216-259 kW (294-353 hp) - -
    Base Power (1st Gear) - Net - Metric 294 HP 181 HP 224 HP
    Standard - Fan Speed - Minimum 550 rpm - -
    Standard - Fan Speed - Maximum 1,450 rpm - -
    Emissions (3) Tier 2/Stage II/Japan 2001 (Tier 2) Equivalent Emission Standards – depending on emission standards of specific country - -
    Torque Rise - Tier 3/Stage IIIA/Japan 2006 (Tier 3) Equivalent 39% - -
    Emissions (1) U.S. EPA Tier 4 Final/EU Stage V/Japan 2014 (Tier 4 Final) - -
    VHP Range - Net 216-259 kW (290-348 hp) - -
    Derating Altitude - Tier 4/Stage IV/Japan 2014 (Tier 4) 12500 ft - -
    Displacement 763 in³ 567.5 in³ 567.5 in³
    Number of Cylinders 6 6 6
    Net Power Range (Tier 4) - 179 HP -
    Standard Capability - 109 °F 109 °F
    Maximum Torque - VHP Plus - 840 lb/ft 1000 lb/ft
    VHP Plus - Gear - Net Power - Reverse 3rd-6th - 200 HP 241 HP
    VHP Plus - Gear - Net Power - Forward 2nd - 189 HP 231 HP
    VHP Plus - Gear - Net Power - Forward 5th - 215 HP 257 HP
    VHP Plus - Gear - Net Power - Forward 3rd - 200 HP 241 HP
    VHP Plus - Gear - Net Power - Forward 8th - 231 HP 272 HP
    Torque Rise - 38% 39%
    VHP Plus - Gear - Net Power - Reverse 2nd - 189 HP 231 HP
    VHP Plus - Gear - Net Power - Forward 1st - 179 HP 221 HP
    VHP Plus - Gear - Net Power - Forward 6th - 220 HP 262 HP
    VHP Plus - Gear - Net Power - Reverse 1st - 179 HP 221 HP
    VHP Plus Range - Net - 133-172 kW (179-231 hp) 165-203 kW (221-272 hp)
    Emissions - U.S. EPA Tier 4 Final/EU Stage V U.S. EPA Tier 4 Final/EU Stage V
    VHP Plus - Gear - Net Power - Forward 7th - 225 HP 267 HP
    VHP Plus Range - Net - Metric - 133-172 kW (181-234 hp) 165-203 kW (224-276 hp)
    VHP Plus - Gear - Net Power - Forward 4th - 210 HP 252 HP
    High Ambient - Fan Speed - Standard - 1,400 rpm 1,400 rpm
    Derating Altitude - 10000 ft 10000 ft
    High Ambient - Fan Speed - Maximum - 1,550 rpm 1,550 rpm
    High Ambient - Fan Speed - Minimum - 500 rpm 500 rpm
    High - Ambient Capability - 122 °F 122 °F

    Weights
    Operating Weight - Typically Equipped 71454 lb 42647 lb 45547 lb
    Gross Vehicle Weight - Maximum - Front Axle - 17075 lb 17075 lb
    Gross Vehicle Weight - Maximum - Rear Axle - 38069 lb 38069 lb
    Operating Weight - Typically Equipped - Front Axle - 12055 lb 13237 lb
    Operating Weight - Typically Equipped - Rear Axle - 30592 lb 32310 lb
    Gross Vehicle Weight - Base - Front Axle - 9343 lb 9907 lb
    Gross Vehicle Weight - Base - Rear Axle - 28077 lb 28812 lb
    Gross Vehicle Weight - Maximum - Total - 55144 lb 55144 lb
    Gross Vehicle Weight - Base - Total - 37420 lb 38719 lb
    Operating Weight - Typically Equipped - Total - 42647 lb 45547 lb

    Moldboard
    Blade Width 16 ft 12 ft 14 ft
    Arc Radius 16.3 in 16.3 in 16.3 in
    Throat Clearance 5 in 6.5 in 6.5 in
    Note *Blade pull calculated at 0.9 traction coefficient, which is equal to ideal no-slip conditions, and Gross Machine Weight. - -
    Thickness 1 in - -
    End Bit - Width 6 in 6 in 6 in
    Blade Pull* - Base GVW 41039 lb - -
    Cutting Edge Width 8 in 6 in 6 in
    Cutting Edge Thickness 1 in 0.6 in 0.6 in
    Down Force - Maximum GVW 43861 lb - -
    Height 31 in - -
    Width 16 ft - -
    Down Force - Base GVW 30743 lb - -
    Blade Pull* - Maximum GVW 52878 lb - -
    End Bit - Thickness 0.75 in 0.6 in 0.6 in
    Moldboard - Height - 24 in 24 in
    Moldboard - Thickness - 0.87 in 0.87 in
    Blade Pull - Base GVW - 25269 lb 25931 lb
    Blade Pull - Maximum GVW - 34262 lb 34262 lb
    Blade Down Pressure - Base GVW - 16038 lb 17004 lb
    Blade Down Pressure - Maximum GVW - 29309 lb 29308 lb
    Moldboard - Blade Width - 12 ft 14 ft

    Service Refill
    Fuel Capacity 131 gal (US) 104 gal (US) 104 gal (US)
    Cooling System 18.5 gal (US) 15 gal (US) 15 gal (US)
    DEF Tank 4.2 gal (US) - -
    Hydraulic System - Total 38.6 gal (US) 26.4 gal (US) 26.4 gal (US)
    Hydraulic System - Tank 18.5 gal (US) 16.9 gal (US) 16.9 gal (US)
    Engine Oil 9.5 gal (US) 7.9 gal (US) 7.9 gal (US)
    Transmission - Differential - Final Drives 34 gal (US) 18.5 gal (US) 18.5 gal (US)
    Tandem Housing - Each 34 gal (US) 20 gal (US) 22.9 gal (US)
    Front Wheel Spindle Bearing Housing 0.24 gal (US) 0.13 gal (US) 0.13 gal (US)
    Circle Drive Housing 2.6 gal (US) 1.8 gal (US) 1.8 gal (US)
    Diesel Exhaust Fluid - 5.8 gal (US) 5.8 gal (US)

    Power Train
    Forward/Reverse Gears 8 Forward/6 Reverse 8 Forward/6 Reverse 8 Forward/6 Reverse
    Transmission Direct drive, power shift, countershaft APECS, Direct Drive, Powershift APECS, Direct Drive, Powershift
    Brakes - Dynamic Brake Torque per Wheel 27069.27 lb/ft - -
    Brakes - Secondary Oil-actuated, oil-disc Dual Circuit Dual Circuit Control
    Brakes - Service Oil-actuated, oil disc Multiple Oil Disc Multiple Oil Disc
    Brakes - Parking Spring applied, hydraulically released Multiple Oil Disc Multiple Oil Disc
    Brakes - Service - Surface Area - 3565 in² 3565 in²

    Hydraulic System
    Circuit Type Electro-hydraulic load sensing, closed center Parallel Parallel
    Pump Type Variable piston Variable Piston Variable Piston
    Maximum System Pressure 3590 psi 3500 psi 3503 psi
    Standby Pressure 856 psi 885 psi 885 psi
    Pump Output* 74 gal/min - -
    Note *Pump output measured at 2,150 rpm. - -
    Pump Output - 55.7 gal/min 55.5 gal/min
    Reservoir Tank Capacity - 16.9 gal (US) 16.9 gal (US)

    Blade Range
    Maximum Blade Position Angle 65° 90° 90°
    Maximum Lift Above Ground 15.7 in 18.9 in 17.8 in
    Maximum Depth of Cut 18.5 in 28.1 in 29.5 in
    Maximum Shoulder Reach Outside of Tires - Right 91 in 77.9 in 89.7 in
    Moldboard Sideshift - Left 29.1 in 20.1 in 20.1 in
    Circle Centershift - Right 22 in 28.7 in 28.7 in
    Circle Centershift - Left 27.2 in 27.4 in 27.4 in
    Moldboard Sideshift - Right 31.1 in 26 in 26 in
    Maximum Shoulder Reach Outside of Tires - Left 91 in 70.5 in 82.3 in
    Blade Tip Range - Forward 40° 40° 40°
    Blade Tip Range - Backward 5° 5° 5°

    Ripper
    Ripping Depth - Maximum 17.8 in 16.8 in 16.8 in
    Shank Holder Spacing - Minimum 17.5 in - -
    Shank Holder Spacing - Maximum 20 in - -
    Ripper Shank Holders 7 5 5
    Penetration Force 30311 lb 20812 lb 20812 lb
    Pry-Out Force 43700 lb 27794 lb 28493 lb
    Machine Length Increase, Beam Raised 63.4 in 40.6 in 40.6 in
    Ripper Shank Holder Spacing - 21 in 21 in

    Weights Tier 4/Stage IV/Japan 2014 (Tier 4 Final)*
    Gross Vehicle Weight - Maximum Tested - Total 84877 lb - -
    Gross Vehicle Weight - Base** - Total 63528 lb - -
    Gross Vehicle Weight - Typically Equipped - Rear Axle 52201 lb - -
    Gross Vehicle Weight - Typically Equipped - Total 71454 lb - -
    Gross Vehicle Weight - Maximum Tested - Front Axle 26125 lb - -
    Gross Vehicle Weight - Typically Equipped - Front Axle 19253 lb - -
    Gross Vehicle Weight - Maximum Tested - Rear Axle 58753 lb - -
    Gross Vehicle Weight - Base** - Front Axle 17932 lb - -
    Gross Vehicle Weight - Base** - Rear Axle 45596 lb - -
    Note (1) *For machines not equipped with Tier 4 Final emission engine, subtract 150 kg (331 lb) from rear axle weight and total weight. - -
    Note (2) **Base operating weight calculated on standard machine configuration with 23.5 R25 tires, full fuel tank operator and ROPS cab. - -

    Dimensions (Approximate)
    Ground Clearance - Rear Axle 15.6 in - -
    Length - Counterweight to Ripper 474.4 in - -
    Length - Front Axle to Moldboard 120.7 in - -
    Length - Front Axle to Mid Tandem 290 in - -
    Height - Top of Cylinders 121.6 in - -
    Width - Tire Center Lines 106.4 in - -
    Width - Outside Rear Tires 134.3 in - -
    Length - Between Tandem Axles 72.5 in - -
    Height - Top of Cab 146.4 in - -
    Width - Outside Front Tires 134.3 in - -
    Height - Front Axle Center 28.9 in - -
    Length - Front Tire to Rear of Machine - Including Tow Hitch 417 in - -
    Height - Exhaust Stack 140 in - -

    Standards
    Steering ISO 5010:2007 ISO 5010 ISO 5010
    Brakes ISO 3450:2011 ISO 3450 ISO 3450
    Sound ISO 6394:2008/ISO 6395:2008/ISO 6396:2008 ISO 6394; ISO 6395 ISO 6394; ISO 6395
    ROPS/FOPS ISO 3471:2008/ISO 3449:2005 ISO 3471/ISO 3449 ISO 3471; ISO 3449
    Note (1) The dynamic spectator sound power level is 109 dB(A) for Stage IV certified configurations and 109 dB(A) for Tier 2/Stage II/Japan 2001 (Tier 2) and Tier 3/Stage IIIA/Japan 2006 (Tier 3) equivalent emission standard machines when measured according to the - -
    Note (2) The dynamic operator sound pressure level is 71 dB(A) for Stage IV certified configurations and 72 dB(A) for Tier 2/Stage II/Japan 2001 (Tier 2) and Tier 3/Stage IIIA/Japan 2006 (Tier 3) equivalent emission standard machines when measured according to the - -

    Variable Power Tier 4 Final/Stage IV/Japan 2014 (Tier 4 Final), Tier 3/Stage IIIA/Japan 2006 (Tier 3) or Tier 2/Stage II/Japan 2001 (Tier 2) - Net
    Gear - Reverse 3rd-6th 298 HP - -
    Gear - Forward 8th 348 HP - -
    Gear - Forward 3rd 298 HP - -
    Gear - Forward 6th 320 HP - -
    Gear - Forward 5th 311 HP - -
    Gear - Reverse 1st 290 HP - -
    Gear - Reverse 2nd 290 HP - -
    Gear - Forward 4th 304 HP - -
    Gear - Forward 7th 328 HP - -
    Gear - Forward 1st 290 HP - -
    Gear - Forward 2nd 290 HP - -

    Variable Power Tier 4 Final/Stage IV/Japan 2014 (Tier 4 Final), Tier 3/Stage IIIA/Japan 2006 (Tier 3) or Tier 2/Stage II/Japan 2001 (Tier 2) - Metric
    Gear - Forward 4th 309 HP - -
    Gear - Reverse 1st 294 HP - -
    Gear - Forward 3rd 302 HP - -
    Gear - Reverse 3rd-6th 302 HP - -
    Gear - Reverse 2nd 294 HP - -
    Gear - Forward 7th 332 HP - -
    Gear - Forward 6th 325 HP - -
    Gear - Forward 8th 353 HP - -
    Gear - Forward 1st 294 HP - -
    Gear - Forward 5th 315 HP - -
    Gear - Forward 2nd 294 HP - -

    Optional Tire Arrangements
    Wheel Group - 19.5×25 MP (1) Tires: 23.5R25 Bridgestone VKT 2 Star - -
    Wheel Group - 19.5×25 MP (2) Tires: 23.5R25 Bridgestone VKT 1 Star - -
    Wheel Group - 19.5×25 MP (3) Tires: 23.5R25 Bridgestone VJT 1 Star - -
    Wheel Group - 19.5×25 MP (4) Tires: 23.5R25 Michelin XHA 2 Star - -
    Wheel Group - 19.5×25 MP (5) Tires: 23.5R25 Michelin XLDD 2 Star L5 - -

    Operating Specifications
    Note Calculated with no slip and 23.5 R25 L-3 tires. - -
    Steering Range - Left/Right 47.5° 50° 50°
    Forward - 6th 16 mile/h 14.5 mile/h 14.7 mile/h
    Forward - 4th 7.6 mile/h 6.9 mile/h 7 mile/h
    Forward - 5th 11.8 mile/h 10.6 mile/h 10.8 mile/h
    Turning Radius - Outside Front Tires 30.5 ft 25.59 ft 25.59 ft
    Forward - 7th 22 mile/h 19.9 mile/h 20.3 mile/h
    Top Speed - Forward 32.1 mile/h 29 mile/h 29.5 mile/h
    Forward - 3rd 5.5 mile/h 5 mile/h 5.1 mile/h
    Reverse - 6th 25.3 mile/h 23 mile/h 23.3 mile/h
    Reverse - 5th 17.4 mile/h 15.7 mile/h 16 mile/h
    Reverse - 2nd 4.1 mile/h 3.7 mile/h 3.8 mile/h
    Reverse - 3rd 6 mile/h 5.4 mile/h 5.5 mile/h
    Forward - 8th 32.1 mile/h 29 mile/h 29.5 mile/h
    Reverse - 1st 2.2 mile/h 2 mile/h 2 mile/h
    Forward - 1st 2.8 mile/h 2.5 mile/h 2.6 mile/h
    Top Speed - Reverse 25.4 mile/h 23 mile/h 23.3 mile/h
    Forward - 2nd 3.8 mile/h 3.4 mile/h 3.5 mile/h
    Reverse - 4th 9.3 mile/h 8.4 mile/h 8.5 mile/h
    Articulation Angle - Left/Right 20° 20° 20°

    Frame
    Front Frame Structure - Height 18.1 in 12.6 in 12.6 in
    Front Frame Structure - Width 14 in 12 in 12 in
    Drawbar - Width 3 in 3 in 3 in
    Drawbar - Height 8 in 6 in 6 in
    Front Axle - Total Oscillation per Side 35° 32° 32°
    Circle - Diameter 71.7 in 60.2 in 61.1 in
    Circle - Blade Beam Thickness 2 in 1.6 in 1.6 in
    Front Frame Structure - Thickness 0.6 in - -
    Front Axle - Wheel Lean 18° Left/17° Right - -
    Front Axle - Height to Center 26.4 in 23.5 in 23.5 in
    Circle - Height - 5.4 in 6.3 in
    Drawbar - Thickness - 0.5 in 0.5 in
    Front-Top/Bottom Plate - Width - 12 in 12 in
    Front-Top/Bottom Plate - Thickness - 0.87 in 0.87 in
    Front Axle - Wheel Lean - Left/Right - 18° 18°

    Tandems
    Tandem Oscillation - Front Up 15° 15° 15°
    Sidewall Thickness - Outer 0.9 in 0.71 in 0.71 in
    Sidewall Thickness - Inner 0.9 in 0.63 in 0.69 in
    Tandem Oscillation - Front Down 25° 25° 25°
    Height 25.5 in 19.9 in 22.5 in
    Width 9.3 in 7.9 in 8 in
    Drive Chain Pitch 2.5 in 2 in 2 in
    Wheel Axle Spacing 72.5 in 60 in 60 in

    Scarifier
    Front, V-Type, 5 or 11 Tooth - Scarifier Shank Holder Spacing - 4.6 in 4.6 in
    Front, V-Type, 5 or 11 Tooth - Scarifying Depth, Maximum - 18.4 in 18.4 in
    Mid, V-Type - Scarifier Shank Holders - 11 11
    Rear - Scarifying Depth, Maximum - 16.8 in 16.8 in
    Front, V-Type, 5 or 11 Tooth - Working Width - 40.6 in 40.6 in
    Front, V-Type - Working Width - 47.4 in 47.4 in
    Mid, V-Type - Working Width - 46.6 in 46.6 in
    Mid, V-Type - Scarifying Depth, Maximum - 11.5 in 11.5 in
    Mid, V-Type - Scarifier Shank Holder Spacing - 4.6 in 4.6 in
    Front, V-Type, 5 or 11 Tooth - Scarifier Shank Holders - 11-May 5/11
    Rear - Working Width - 84 in 84 in
    Rear - Scarifier Shank Holders - 9 9
    Rear - Scarifier Shank Holder Spacing - 10.5 in 10.5 in

    Dimensions
    Height - Top of Cab - 130 in 130 in
    Length - Counterweight to Ripper - 399 in 399 in
    Width - Outside Front Tires - 98.9 in 98.9 in
    Length - Front Axle to Mid Tandem - 241 in 241 in
    Length - Front Tire to Rear of Machine - 351 in 351 in
    Length - Front Axle to Moldboard - 100 in 100 in
    Length - Between Tandem Axles - 60 in 60 in
    Width - Outside Rear Tires - 98.9 in 98.9 in
    Width - Tire Center Lines - 84.3 in 84.3 in
    Height - Front Axle Center - 23.5 in 23.5 in
    Height - Exhaust Stack - 128 in 128 in
    Height - Top of Cylinders - 120 in 120 in
    Ground Clearance - Rear Axle - 13.3 in 13.3 in

    Air Conditioning System
    Air Conditioning - - The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes.
    Add a Similar Product: