Compare Equipment Go Back
 G3520H Gas Generator |
 Cat Customizable Switchgear and Controls |
 XQP550 EU Stage V |
 EMCP 4.4 Master Control Panel |
 XQ425 |
 Cat Switchgear |
|
Generator Set Specifications |
||||||
|---|---|---|---|---|---|---|
| Continuous Rating | 2519 / 2500 ekW @ 1.0pf | - | - | - | - | - |
| Fuel Type | Natural Gas, Hydrogen Blend (up to 25%) | - | - | - | - | - |
| Maximum Electrical Efficiency | 45.30% | - | - | - | - | - |
| Frequency | 50/60 Hz | - | - | - | - | - |
| RPM | 1500 | - | - | - | - | - |
Engine Specifications |
||||||
| Engine Model | G3520H | - | - | - | - | - |
| Displacement | 5956 in³ | - | - | - | - | - |
| Aspiration | TA | - | - | - | - | - |
| Bore | 6.7 in | - | - | - | - | - |
| Stroke | 8.5 in | - | - | - | - | - |
| Compression Ratio | 12.1 | - | - | - | - | - |
Generator Set Dimensions |
||||||
| Length | 302 in | - | - | - | - | - |
| Width | 86 in | - | - | - | - | - |
| Height | 97 in | - | - | - | - | - |
| Dry Weight - Genset | 54675 lb | - | - | - | - | - |
Technical Summary |
||||||
| Configuration | - | Application-specific switchgear with control logic designed to meet any customer's sequence of operations. Examples are 3+ Utilities, CHP applications, complex load shed schemes, etc | - | Remote monitoring and control for up to 8 generator sets via high-speed network. Enables paralleling a group of EMCP 4.4 equipped generator sets to a single utility source. | - | - |
| Modes of Operation | - | All modes of paralleling generator sets to each other and to other sources (utility, alternative fuels, wind, etc) can be supported. Caterpillar generation and control experts can design and program the most complex power schemes to meet your critical pow | - | Emergency standby, island, utility paralleling | - | - |
| Application | - | LV and MV ( 208V - 38 kV) 50 / 60 Hz | - | LV and MV (208V - 38 kV) | - | - |
| Technical Summary | - | - | - | - | - | Modular system enables any configuration Distribution Boards, Motor Control Centers & PLC Control cabinets. Accommodates fixed or withdrawable breakers. |
Generator Protective Devices |
||||||
| ANSI Protective Devices | - | Per customer specification | - | 15/25, 27/59, 81 O/U, 32, 40, 50, 51 | - | - |
Utility Protective Devices |
||||||
| ANSI Protective Devices | - | Per customer specification | - | 15/25. 27/59, 81 O/U, 32,47 (Industrial Grade) | - | - |
Environmental Parameters |
||||||
| Certifications | - | Per customer specification | - | IBC, CBC, UBC & OSHPD Certified | - | - |
| Control Panel Enclosure | - | Per customer specification | - | NEMA 1 wall-mounted construction | - | - |
| Operating Temperature | - | Per customer specification | - | 0°C to 50°C | - | - |
| Storage Temperature | - | Per customer specification | - | -20°C to +60°C | - | - |
| Low Voltage Standards | - | Per customer specification | - | NEMA SG-5, CSA, ANSI C37.51, ANSI C37.20.1, UL 1558 or UL 891, NFPA 110, NFPA 99 and NFPA 70 | - | - |
| Medium Voltage Standards | - | Per customer specification | - | NEMA SG-5, ANSI / IEEE C37.20.2, CSA-C22.2 No. 31-M89, EEMAC G8-3.2, NFPA 70, NFPA 99 and NFPA 1110 | - | - |
Generator Set |
||||||
| Rating Prime | - | - | 550 kVA | - | 340 ekW (425 kVA) | - |
| Frequency | - | - | 50/60 Hz | - | 50/60 Hz | - |
| Voltage | - | - | 220 - 480 V | - | 120 - 600 V | - |
| Fuel/Emissions Strategy | - | - | EU Stage V | - | - | - |
| Rating Standby | - | - | - | - | 375 ekW (469 kVA) | - |
Engine |
||||||
| Engine | - | - | Cat® C18 | - | C13 | - |
| Fuel | - | - | Diesel | - | Diesel | - |
Dimensions |
||||||
| Width | - | - | 80.3 in | - | - | - |
| Height | - | - | 90.5 in | - | - | - |
| Length | - | - | 213.3 in | - | - | - |
| Weight - With Lube Oil and Coolant | - | - | 14860 lb | - | - | - |
| Height - Without Trailer | - | - | - | - | 60 in | - |
| Length - Without Trailer | - | - | - | - | 208.7 in | - |
| Width - Without Trailer | - | - | - | - | 104 in | - |
| Weight with Lube Oil and Coolant, Without Trailer | - | - | - | - | 14700 lb | - |
| Standard Widths | - | - | - | - | - | 600 mm for ABB Emax2 E2 1600 - 2500A. 750 mm for ABB Emax2 E4 3200 - 4000A. 1200 mm for ABB Emax2 E6 4000 - 6300A. |
| Standard Heights | - | - | - | - | - | Heights include 100mm plinth with fork lift pockets, 1900 mm up to 3200A, 2200 mm for 400,2200 mm for PLC and control cabinets. Option for single point lifting on 4 corners with M10 swivel eyes. Standard sizes for shipping |
| Standard Depths | - | - | - | - | - | 300, 450 & 750mm for controls and PLC cabinets. 900mm for fixed breakers. 1050mm for withdrawable breakers |
Fuel Consumption |
||||||
| 100% Load 60 Hz | - | - | 34.3 gal/hr | - | - | - |
| 100% Load 50 Hz | - | - | 33.4 gal/hr | - | - | - |
| 75% Load 60 Hz | - | - | 26.13 gal/hr | - | - | - |
| 75% Load 50 Hz | - | - | 24.9 gal/hr | - | - | - |
| 100% Load 60Hz | - | - | - | - | 25.1 gal/hr | - |
| 75% Load 60Hz | - | - | - | - | 19.2 gal/hr | - |
| 50% Load 60Hz | - | - | - | - | 13.6 gal/hr | - |
Noise rating (with enclosure) |
||||||
| Sound Power @ 1 meters (3 feet) @ 75% of rating (50Hz) | - | - | 79.19 | - | - | - |
| Sound Power @ 7 meters (23 feet) @ All Ratings | - | - | - | - | 74 dB(A) | - |
Enclosure Rating |
||||||
| Configuration | - | - | - | - | - | IP4X |
Operating Temperature |
||||||
| Operating Temperature | - | - | - | - | - | 35 °C / 40 °C @ 1 hr, option for 0…50 °C (32…122 °F) |
Application |
||||||
| Application | - | - | - | - | - | LV 380…480 VAC, 50 Hz, 3-Phase. |
Modes of Operation |
||||||
| Modes of Operation | - | - | - | - | - | Switchgear integration options for multi generator and utility synchronising, load sharing, Peak Lopping/Shaving, AMF, Changeover, Load bank connection, Protection relay etc. |
Add a Similar Product:
