CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    14 Motor Grader
    View Product
    150 Motor Grader
    View Product Remove
    160 Motor Grader
    View Product Remove

    Engine
    Base Power (1st Gear) - Net 238 HP - 221 HP
    Engine Model Cat C13 Cat® C9.3 Cat® C9.3
    Bore 5.1 in 4.5 in 4.5 in
    Stroke 6.2 in 5.9 in 5.9 in
    Speed at Rated Power 1,850 rpm 2,000 rpm 2,000 rpm
    Note (3) Net power advertised is the power available at rated speed of 1,850 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator. - -
    Standard Capability 122 °F 109 °F 109 °F
    Note (2) Optimized VHP Plus is standard for the 14M3. - -
    Torque Rise 41% 39% 39%
    Maximum Altitude - Full Power 13900 ft - -
    Maximum Torque - VHP Plus 1137 lb/ft 920 lb/ft 1000 lb/ft
    Emissions Tier 4 Final/Stage V, Tier 3/Stage IIIA equivalent or Tier 2/Stage II equivalent U.S. EPA Tier 4 Final/EU Stage V U.S. EPA Tier 4 Final/EU Stage V
    Maximum Altitude - Full Power (Tier 3) 14349 ft - -
    Maximum Altitude - Full Power (Tier 2) 12049 ft - -
    Note (1) Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 Standards in effect at the time of manufacture. - -
    Standard - Fan Speed - Minimum 550 rpm - -
    Note (4) Power as declared per ISO 14396. Rated rpm 1,850. VHP+ = 228 kW (306 hp) - -
    Note (5) Cat engines equipped with a Selective Catalytic Reduction (SCR) system are required to use: Diesel Exhaust Fluid (DEF) which meets the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1. - -
    Standard - Fan Speed - Maximum 1,600 rpm - -
    Displacement 763 in³ 567.5 in³ 567.5 in³
    Number of Cylinders 6 6 6
    Net Power Range (Tier 4) - 200 HP -
    High Ambient - Fan Speed - Standard - 1,400 rpm 1,400 rpm
    VHP Plus Range - Net - Metric - 149-188 kW (202-255 hp) 165-203 kW (224-276 hp)
    VHP Plus Range - Net - 149-188 kW (200-252 hp) 165-203 kW (221-272 hp)
    VHP Plus - Gear - Net Power - Reverse 1st - 200 HP 221 HP
    VHP Plus - Gear - Net Power - Forward 1st - 200 HP 221 HP
    VHP Plus - Gear - Net Power - Forward 8th - 252 HP 272 HP
    VHP Plus - Gear - Net Power - Forward 6th - 241 HP 262 HP
    VHP Plus - Gear - Net Power - Forward 2nd - 210 HP 231 HP
    VHP Plus - Gear - Net Power - Forward 7th - 247 HP 267 HP
    VHP Plus - Gear - Net Power - Forward 5th - 236 HP 257 HP
    VHP Plus - Gear - Net Power - Reverse 3rd-6th - 220 HP 241 HP
    VHP Plus - Gear - Net Power - Forward 4th - 231 HP 252 HP
    Base Power (1st Gear) - Net - Metric - 202 HP 224 HP
    VHP Plus - Gear - Net Power - Reverse 2nd - 210 HP 231 HP
    VHP Plus - Gear - Net Power - Forward 3rd - 220 HP 241 HP
    Derating Altitude - 10000 ft 10000 ft
    High Ambient - Fan Speed - Maximum - 1,550 rpm 1,550 rpm
    High Ambient - Fan Speed - Minimum - 500 rpm 500 rpm
    High - Ambient Capability - 122 °F 122 °F

    Weights
    Operating Weight - Typically Equipped 57250 lb 43950 lb 45547 lb
    Gross Vehicle Weight - Base* - Total 50980 lb - -
    Gross Vehicle Weight - Base* - Front Axle 13994 lb - -
    Gross Vehicle Weight - Typically Equipped - Total 57250 lb - -
    Gross Vehicle Weight - Typically Equipped - Rear Axle 42005 lb - -
    Gross Vehicle Weight - Typically Equipped - Front Axle 15245 lb - -
    Gross Vehicle Weight - Base* - Rear Axle 36994 lb - -
    Note *Base operating weight calculated on standard machine configuration with 20.5 R25 tires, full fuel tank operator and ROPS cab. - -
    Gross Vehicle Weight - Maximum - Front Axle - 17075 lb 17075 lb
    Gross Vehicle Weight - Maximum - Rear Axle - 38069 lb 38069 lb
    Operating Weight - Typically Equipped - Front Axle - 12549 lb 13237 lb
    Operating Weight - Typically Equipped - Rear Axle - 31401 lb 32310 lb
    Gross Vehicle Weight - Base - Front Axle - 9601 lb 9907 lb
    Gross Vehicle Weight - Base - Rear Axle - 28590 lb 28812 lb
    Gross Vehicle Weight - Maximum - Total - 55144 lb 55144 lb
    Operating Weight - Typically Equipped - Total - 43950 lb 45547 lb
    Gross Vehicle Weight - Base - Total - 38191 lb 38719 lb

    Moldboard
    Blade Width 14 ft 12 ft 14 ft
    Arc Radius 16.3 in 16.3 in 16.3 in
    Throat Clearance 4.6 in 6.5 in 6.5 in
    Blade Width - With End Bits 169 in - -
    Blade Height - With Cutting Edge 24.9 in - -
    Blade Width - Without End Bits 164 in - -
    Blade Height - Without Cutting Edge 23 in - -
    Moldboard - Height - 24 in 24 in
    Moldboard - Thickness - 0.87 in 0.87 in
    Cutting Edge Width - 6 in 6 in
    Cutting Edge Thickness - 0.6 in 0.6 in
    End Bit - Width - 6 in 6 in
    End Bit - Thickness - 0.6 in 0.6 in
    Blade Pull - Base GVW - 25732 lb 25931 lb
    Blade Pull - Maximum GVW - 34262 lb 34262 lb
    Blade Down Pressure - Base GVW - 16480 lb 17004 lb
    Blade Down Pressure - Maximum GVW - 29308 lb 29308 lb
    Moldboard - Blade Width - 12 ft 14 ft

    Blade Range
    Maximum Depth of Cut 23.3 in 28.1 in 29.5 in
    Circle Centershift - Left 25.6 in 27.4 in 27.4 in
    Maximum Lift Above Ground 16.5 in 18.9 in 17.8 in
    Circle Centershift - Right 20.5 in 28.7 in 28.7 in
    Blade Tip Range - Backward 5° 5° 5°
    Maximum Shoulder Reach Outside of Tires - Right 78.9 in 77.9 in 89.7 in
    Moldboard Sideshift - Right 31.1 in 26 in 26 in
    Moldboard Sideshift - Left 29.1 in 20.1 in 20.1 in
    Maximum Shoulder Reach Outside of Tires - Left 73.6 in 70.5 in 82.3 in
    Blade Tip Range - Forward 40° 40° 40°
    Maximum Blade Position Angle - 90° 90°

    Frame
    Circle - Outer Diameter 71.7 in - -
    Front Axle - Wheel Lean - Left/Right 17.1° 18° 18°
    Front Axle - Total Oscillation per Side 32° 32° 32°
    Drawbar - Width - 3 in 3 in
    Circle - Diameter - 60.2 in 61.1 in
    Circle - Blade Beam Thickness - 1.6 in 1.6 in
    Drawbar - Height - 6 in 6 in
    Front Frame Structure - Width - 12 in 12 in
    Front Frame Structure - Height - 12.6 in 12.6 in
    Circle - Height - 5.4 in 6.3 in
    Drawbar - Thickness - 0.5 in 0.5 in
    Front-Top/Bottom Plate - Width - 12 in 12 in
    Front-Top/Bottom Plate - Thickness - 0.87 in 0.87 in
    Front Axle - Height to Center - 23.5 in 23.5 in

    Service Refill Capacities
    Transmission and Differential 23.5 gal (US) - -
    Diesel Exhaust Fluid Tank (Tier 4 Only) 5.8 gal (US) - -
    Hydraulic System 33 gal (US) - -
    Circle Drive 1.8 gal (US) - -
    Cooling System 15.9 gal (US) - -
    Fuel Tank 109.9 gal (US) - -

    Air Conditioning System
    Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 2.0 kg (4.4 lb) of refrigerant which has a CO2 equivalent of 2.860 metric tonne (2.76 ton). The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes. The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes.

    Operating Specifications
    Top Speed - Forward - 29 mile/h 29.5 mile/h
    Top Speed - Reverse - 23 mile/h 23.3 mile/h
    Turning Radius - Outside Front Tires - 25.59 ft 25.59 ft
    Steering Range - Left/Right - 50° 50°
    Articulation Angle - Left/Right - 20° 20°
    Forward - 1st - 2.5 mile/h 2.6 mile/h
    Forward - 2nd - 3.4 mile/h 3.5 mile/h
    Forward - 3rd - 5 mile/h 5.1 mile/h
    Forward - 4th - 6.9 mile/h 7 mile/h
    Forward - 5th - 10.6 mile/h 10.8 mile/h
    Forward - 6th - 14.5 mile/h 14.7 mile/h
    Forward - 7th - 19.9 mile/h 20.3 mile/h
    Forward - 8th - 29 mile/h 29.5 mile/h
    Reverse - 1st - 2 mile/h 2 mile/h
    Reverse - 2nd - 3.7 mile/h 3.8 mile/h
    Reverse - 3rd - 5.4 mile/h 5.5 mile/h
    Reverse - 4th - 8.4 mile/h 8.5 mile/h
    Reverse - 5th - 15.7 mile/h 16 mile/h
    Reverse - 6th - 23 mile/h 23.3 mile/h

    Service Refill
    Fuel Capacity - 104 gal (US) 104 gal (US)
    Cooling System - 15 gal (US) 15 gal (US)
    Hydraulic System - Total - 26.4 gal (US) 26.4 gal (US)
    Hydraulic System - Tank - 16.9 gal (US) 16.9 gal (US)
    Transmission - Differential - Final Drives - 18.5 gal (US) 18.5 gal (US)
    Diesel Exhaust Fluid - 5.8 gal (US) 5.8 gal (US)
    Engine Oil - 7.9 gal (US) 7.9 gal (US)
    Tandem Housing - Each - 20 gal (US) 22.9 gal (US)
    Front Wheel Spindle Bearing Housing - 0.13 gal (US) 0.13 gal (US)
    Circle Drive Housing - 1.8 gal (US) 1.8 gal (US)

    Power Train
    Forward/Reverse Gears - 8 Forward/6 Reverse 8 Forward/6 Reverse
    Transmission - APECS, Direct Drive, Powershift APECS, Direct Drive, Powershift
    Brakes - Service - Multiple Oil Disc Multiple Oil Disc
    Brakes - Service - Surface Area - 3565 in² 3565 in²
    Brakes - Parking - Multiple Oil Disc Multiple Oil Disc
    Brakes - Secondary - Dual Circuit Dual Circuit Control

    Hydraulic System
    Circuit Type - Parallel Parallel
    Pump Type - Variable Piston Variable Piston
    Pump Output - 55.7 gal/min 55.5 gal/min
    Maximum System Pressure - 3500 psi 3503 psi
    Reservoir Tank Capacity - 16.9 gal (US) 16.9 gal (US)
    Standby Pressure - 885 psi 885 psi

    Ripper
    Ripper Shank Holder Spacing - 21 in 21 in
    Ripping Depth - Maximum - 16.8 in 16.8 in
    Ripper Shank Holders - 5 5
    Penetration Force - 20812 lb 20812 lb
    Pry-Out Force - 27794 lb 28493 lb
    Machine Length Increase, Beam Raised - 40.6 in 40.6 in

    Scarifier
    Front, V-Type, 5 or 11 Tooth - Scarifier Shank Holders - 11-May 5/11
    Front, V-Type, 5 or 11 Tooth - Scarifying Depth, Maximum - 18.4 in 18.4 in
    Rear - Scarifying Depth, Maximum - 16.8 in 16.8 in
    Mid, V-Type - Working Width - 46.6 in 46.6 in
    Front, V-Type - Working Width - 47.4 in 47.4 in
    Front, V-Type, 5 or 11 Tooth - Working Width - 40.6 in 40.6 in
    Mid, V-Type - Scarifying Depth, Maximum - 11.5 in 11.5 in
    Mid, V-Type - Scarifier Shank Holders - 11 11
    Mid, V-Type - Scarifier Shank Holder Spacing - 4.6 in 4.6 in
    Front, V-Type, 5 or 11 Tooth - Scarifier Shank Holder Spacing - 4.6 in 4.6 in
    Rear - Working Width - 84 in 84 in
    Rear - Scarifier Shank Holders - 9 9
    Rear - Scarifier Shank Holder Spacing - 10.5 in 10.5 in

    Standards
    Steering - ISO 5010 ISO 5010
    ROPS/FOPS - ISO 3471/ISO 3449 ISO 3471; ISO 3449
    Brakes - ISO 3450 ISO 3450
    Sound - ISO 6394; ISO 6395 ISO 6394; ISO 6395

    Tandems
    Height - 19.9 in 22.5 in
    Width - 7.9 in 8 in
    Sidewall Thickness - Inner - 0.63 in 0.69 in
    Sidewall Thickness - Outer - 0.71 in 0.71 in
    Drive Chain Pitch - 2 in 2 in
    Wheel Axle Spacing - 60 in 60 in
    Tandem Oscillation - Front Up - 15° 15°
    Tandem Oscillation - Front Down - 25° 25°

    Dimensions
    Height - Top of Cab - 130 in 130 in
    Length - Counterweight to Ripper - 399 in 399 in
    Width - Outside Front Tires - 98.9 in 98.9 in
    Length - Front Axle to Mid Tandem - 241 in 241 in
    Length - Front Tire to Rear of Machine - 351 in 351 in
    Length - Front Axle to Moldboard - 100 in 100 in
    Length - Between Tandem Axles - 60 in 60 in
    Width - Outside Rear Tires - 98.9 in 98.9 in
    Width - Tire Center Lines - 84.3 in 84.3 in
    Height - Front Axle Center - 23.5 in 23.5 in
    Height - Exhaust Stack - 128 in 128 in
    Height - Top of Cylinders - 120 in 120 in
    Ground Clearance - Rear Axle - 13.3 in 13.3 in
    Add a Similar Product: