CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    150 Motor Grader
    View Product
    140 Motor Grader LVR
    View Product Remove
    16 Motor Grader
    View Product Remove

    Engine
    Net Power Range (Tier 4) 200 HP - -
    Engine Model Cat® C9.3 Cat C9.3 Cat® C13
    Bore 4.5 in 4.5 in 5.1 in
    Stroke 5.9 in 5.9 in 6.2 in
    Speed at Rated Power 2,000 rpm - 2,000 rpm
    Maximum Torque - VHP Plus 920 lb/ft - -
    Emissions U.S. EPA Tier 4 Final/EU Stage V U.S. EPA Tier 4 Final/EU Stage V -
    High Ambient - Fan Speed - Standard 1,400 rpm - -
    VHP Plus Range - Net - Metric 149-188 kW (202-255 hp) - -
    Standard Capability 109 °F 109 °F -
    VHP Plus Range - Net 149-188 kW (200-252 hp) - -
    Torque Rise 39% - -
    VHP Plus - Gear - Net Power - Reverse 1st 200 HP - -
    VHP Plus - Gear - Net Power - Forward 1st 200 HP - -
    VHP Plus - Gear - Net Power - Forward 8th 252 HP - -
    VHP Plus - Gear - Net Power - Forward 6th 241 HP - -
    VHP Plus - Gear - Net Power - Forward 2nd 210 HP - -
    VHP Plus - Gear - Net Power - Forward 7th 247 HP - -
    VHP Plus - Gear - Net Power - Forward 5th 236 HP - -
    VHP Plus - Gear - Net Power - Reverse 3rd-6th 220 HP - -
    VHP Plus - Gear - Net Power - Forward 4th 231 HP - -
    Base Power (1st Gear) - Net - Metric 202 HP - 294 HP
    VHP Plus - Gear - Net Power - Reverse 2nd 210 HP - -
    VHP Plus - Gear - Net Power - Forward 3rd 220 HP - -
    Displacement 567.5 in³ 567.5 in³ 763 in³
    Number of Cylinders 6 6 6
    Derating Altitude 10000 ft - -
    High Ambient - Fan Speed - Maximum 1,550 rpm - -
    High Ambient - Fan Speed - Minimum 500 rpm - -
    High - Ambient Capability 122 °F - -
    Net Power - EEC 80/1269 - 250 HP -
    Net Power - ISO 9249/SAE J1349 - 250 HP -
    Engine RPM - 2,000 -
    Torque Rise - ISO 9294 - 44% -
    Base Power (1st Gear) - Net - - 290 HP
    Optimized VHP Range - Net - - 216-259 kW (290-348 hp)
    Derating Altitude - Tier 2/Stage II/Japan 2001 (Tier 2) Equivalent - - 12176 ft
    Maximum Torque - ISO 9249 - Tier 3/Stage IIIA/Japan 2006 (Tier 3) Equivalent - - 1270 lb/ft
    Maximum Torque - ISO 9249 - Tier 4/Stage IV/Japan 2014 (Tier 4) - - 1306 lb/ft
    Maximum Torque - ISO 9249 - Tier 2/Stage II/Japan 2001 (Tier 2) Equivalent - - 1270 lb/ft
    Emissions (2) - - Tier 3/Stage IIIA/Japan 2006 (Tier 3) Equivalent Emission Standards – depending on emission standards of specific country
    Torque Rise - Tier 4/Stage IV/Japan 2014 (Tier 4) - - 43%
    Torque Rise - Tier 2/Stage II/Japan 2001 (Tier 2) Equivalent - - 39%
    Standard - Ambient Capability - - 122 °F
    Derating Altitude - Tier 3/Stage IIIA/Japan 2006 (Tier 3) Equivalent - - 12973 ft
    VHP Range - Net - Metric - - 216-259 kW (294-353 hp)
    Standard - Fan Speed - Minimum - - 550 rpm
    Standard - Fan Speed - Maximum - - 1,450 rpm
    Emissions (3) - - Tier 2/Stage II/Japan 2001 (Tier 2) Equivalent Emission Standards – depending on emission standards of specific country
    Torque Rise - Tier 3/Stage IIIA/Japan 2006 (Tier 3) Equivalent - - 39%
    Emissions (1) - - U.S. EPA Tier 4 Final/EU Stage V/Japan 2014 (Tier 4 Final)
    VHP Range - Net - - 216-259 kW (290-348 hp)
    Derating Altitude - Tier 4/Stage IV/Japan 2014 (Tier 4) - - 12500 ft

    Weights
    Operating Weight - Typically Equipped 43950 lb 20236 lb 71454 lb
    Gross Vehicle Weight - Maximum - Front Axle 17075 lb - -
    Gross Vehicle Weight - Maximum - Rear Axle 38069 lb - -
    Operating Weight - Typically Equipped - Front Axle 12549 lb - -
    Operating Weight - Typically Equipped - Rear Axle 31401 lb - -
    Gross Vehicle Weight - Base - Front Axle 9601 lb - -
    Gross Vehicle Weight - Base - Rear Axle 28590 lb - -
    Gross Vehicle Weight - Maximum - Total 55144 lb - -
    Operating Weight - Typically Equipped - Total 43950 lb - -
    Gross Vehicle Weight - Base - Total 38191 lb - -

    Moldboard
    Blade Width 12 ft 12 ft 16 ft
    Moldboard - Height 24 in - -
    Moldboard - Thickness 0.87 in - -
    Arc Radius 16.3 in 16.3 in 16.3 in
    Throat Clearance 6.5 in 6.5 in 5 in
    Cutting Edge Width 6 in - 8 in
    Cutting Edge Thickness 0.6 in - 1 in
    End Bit - Width 6 in - 6 in
    End Bit - Thickness 0.6 in - 0.75 in
    Blade Pull - Base GVW 25732 lb - -
    Blade Pull - Maximum GVW 34262 lb - -
    Blade Down Pressure - Base GVW 16480 lb - -
    Blade Down Pressure - Maximum GVW 29308 lb - -
    Moldboard - Blade Width 12 ft - -
    Cutting Edge - 6 in -
    End Bit - 6 in -
    Note - - *Blade pull calculated at 0.9 traction coefficient, which is equal to ideal no-slip conditions, and Gross Machine Weight.
    Thickness - - 1 in
    Blade Pull* - Base GVW - - 41039 lb
    Down Force - Maximum GVW - - 43861 lb
    Height - - 31 in
    Width - - 16 ft
    Down Force - Base GVW - - 30743 lb
    Blade Pull* - Maximum GVW - - 52878 lb

    Operating Specifications
    Top Speed - Forward 29 mile/h - 32.1 mile/h
    Top Speed - Reverse 23 mile/h - 25.4 mile/h
    Turning Radius - Outside Front Tires 25.59 ft - 30.5 ft
    Steering Range - Left/Right 50° - 47.5°
    Articulation Angle - Left/Right 20° - 20°
    Forward - 1st 2.5 mile/h - 2.8 mile/h
    Forward - 2nd 3.4 mile/h - 3.8 mile/h
    Forward - 3rd 5 mile/h - 5.5 mile/h
    Forward - 4th 6.9 mile/h - 7.6 mile/h
    Forward - 5th 10.6 mile/h - 11.8 mile/h
    Forward - 6th 14.5 mile/h - 16 mile/h
    Forward - 7th 19.9 mile/h - 22 mile/h
    Forward - 8th 29 mile/h - 32.1 mile/h
    Reverse - 1st 2 mile/h - 2.2 mile/h
    Reverse - 2nd 3.7 mile/h - 4.1 mile/h
    Reverse - 3rd 5.4 mile/h - 6 mile/h
    Reverse - 4th 8.4 mile/h - 9.3 mile/h
    Reverse - 5th 15.7 mile/h - 17.4 mile/h
    Reverse - 6th 23 mile/h - 25.3 mile/h
    Note - - Calculated with no slip and 23.5 R25 L-3 tires.

    Service Refill
    Fuel Capacity 104 gal (US) - 131 gal (US)
    Cooling System 15 gal (US) - 18.5 gal (US)
    Hydraulic System - Total 26.4 gal (US) - 38.6 gal (US)
    Hydraulic System - Tank 16.9 gal (US) - 18.5 gal (US)
    Transmission - Differential - Final Drives 18.5 gal (US) - 34 gal (US)
    Diesel Exhaust Fluid 5.8 gal (US) - -
    Engine Oil 7.9 gal (US) - 9.5 gal (US)
    Tandem Housing - Each 20 gal (US) - 34 gal (US)
    Front Wheel Spindle Bearing Housing 0.13 gal (US) - 0.24 gal (US)
    Circle Drive Housing 1.8 gal (US) - 2.6 gal (US)
    Hydraulic System - 14.5 gal (US) -
    Engine Crankcase - 7.9 gal (US) -
    Circle Drive - 1.8 gal (US) -
    Fuel Tank - 100 gal (US) -
    Front Wheel Spindle Bearing - Each - 0.13 gal (US) -
    DEF Tank - - 4.2 gal (US)

    Power Train
    Forward/Reverse Gears 8 Forward/6 Reverse - 8 Forward/6 Reverse
    Transmission APECS, Direct Drive, Powershift - Direct drive, power shift, countershaft
    Brakes - Service Multiple Oil Disc - Oil-actuated, oil disc
    Brakes - Service - Surface Area 3565 in² - -
    Brakes - Parking Multiple Oil Disc - Spring applied, hydraulically released
    Brakes - Secondary Dual Circuit - Oil-actuated, oil-disc
    Brakes - Dynamic Brake Torque per Wheel - - 27069.27 lb/ft

    Hydraulic System
    Circuit Type Parallel - Electro-hydraulic load sensing, closed center
    Pump Type Variable Piston - Variable piston
    Pump Output 55.7 gal/min - -
    Maximum System Pressure 3500 psi - 3590 psi
    Reservoir Tank Capacity 16.9 gal (US) - -
    Standby Pressure 885 psi - 856 psi
    Pump Output* - - 74 gal/min
    Note - - *Pump output measured at 2,150 rpm.

    Frame
    Drawbar - Width 3 in - 3 in
    Circle - Diameter 60.2 in - 71.7 in
    Circle - Blade Beam Thickness 1.6 in - 2 in
    Drawbar - Height 6 in - 8 in
    Front Frame Structure - Width 12 in - 14 in
    Front Frame Structure - Height 12.6 in - 18.1 in
    Circle - Height 5.4 in - -
    Drawbar - Thickness 0.5 in - -
    Front-Top/Bottom Plate - Width 12 in - -
    Front-Top/Bottom Plate - Thickness 0.87 in - -
    Front Axle - Height to Center 23.5 in - 26.4 in
    Front Axle - Wheel Lean - Left/Right 18° - -
    Front Axle - Total Oscillation per Side 32° - 35°
    Front Frame Structure - Thickness - - 0.6 in
    Front Axle - Wheel Lean - - 18° Left/17° Right

    Blade Range
    Circle Centershift - Right 28.7 in - 22 in
    Circle Centershift - Left 27.4 in - 27.2 in
    Moldboard Sideshift - Right 26 in - 31.1 in
    Moldboard Sideshift - Left 20.1 in - 29.1 in
    Maximum Blade Position Angle 90° - 65°
    Blade Tip Range - Forward 40° - 40°
    Blade Tip Range - Backward 5° - 5°
    Maximum Shoulder Reach Outside of Tires - Right 77.9 in - 91 in
    Maximum Shoulder Reach Outside of Tires - Left 70.5 in - 91 in
    Maximum Lift Above Ground 18.9 in 18.9 in 15.7 in
    Maximum Depth of Cut 28.1 in 28.9 in 18.5 in

    Ripper
    Ripper Shank Holder Spacing 21 in - -
    Ripping Depth - Maximum 16.8 in - 17.8 in
    Ripper Shank Holders 5 - 7
    Penetration Force 20812 lb - 30311 lb
    Pry-Out Force 27794 lb - 43700 lb
    Machine Length Increase, Beam Raised 40.6 in - 63.4 in
    Shank Holder Spacing - Minimum - - 17.5 in
    Shank Holder Spacing - Maximum - - 20 in

    Scarifier
    Front, V-Type, 5 or 11 Tooth - Scarifier Shank Holders 11-May - -
    Front, V-Type, 5 or 11 Tooth - Scarifying Depth, Maximum 18.4 in - -
    Rear - Scarifying Depth, Maximum 16.8 in - -
    Mid, V-Type - Working Width 46.6 in - -
    Front, V-Type - Working Width 47.4 in - -
    Front, V-Type, 5 or 11 Tooth - Working Width 40.6 in - -
    Mid, V-Type - Scarifying Depth, Maximum 11.5 in - -
    Mid, V-Type - Scarifier Shank Holders 11 - -
    Mid, V-Type - Scarifier Shank Holder Spacing 4.6 in - -
    Front, V-Type, 5 or 11 Tooth - Scarifier Shank Holder Spacing 4.6 in - -
    Rear - Working Width 84 in - -
    Rear - Scarifier Shank Holders 9 - -
    Rear - Scarifier Shank Holder Spacing 10.5 in - -

    Standards
    Steering ISO 5010 - ISO 5010:2007
    ROPS/FOPS ISO 3471/ISO 3449 - ISO 3471:2008/ISO 3449:2005
    Brakes ISO 3450 - ISO 3450:2011
    Sound ISO 6394; ISO 6395 - ISO 6394:2008/ISO 6395:2008/ISO 6396:2008
    Note (1) - - The dynamic spectator sound power level is 109 dB(A) for Stage IV certified configurations and 109 dB(A) for Tier 2/Stage II/Japan 2001 (Tier 2) and Tier 3/Stage IIIA/Japan 2006 (Tier 3) equivalent emission standard machines when measured according to the
    Note (2) - - The dynamic operator sound pressure level is 71 dB(A) for Stage IV certified configurations and 72 dB(A) for Tier 2/Stage II/Japan 2001 (Tier 2) and Tier 3/Stage IIIA/Japan 2006 (Tier 3) equivalent emission standard machines when measured according to the

    Air Conditioning System
    Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes. - -

    Tandems
    Height 19.9 in - 25.5 in
    Width 7.9 in - 9.3 in
    Sidewall Thickness - Inner 0.63 in - 0.9 in
    Sidewall Thickness - Outer 0.71 in - 0.9 in
    Drive Chain Pitch 2 in - 2.5 in
    Wheel Axle Spacing 60 in - 72.5 in
    Tandem Oscillation - Front Up 15° - 15°
    Tandem Oscillation - Front Down 25° - 25°

    Dimensions
    Height - Top of Cab 130 in - -
    Length - Counterweight to Ripper 399 in - -
    Width - Outside Front Tires 98.9 in - -
    Length - Front Axle to Mid Tandem 241 in - -
    Length - Front Tire to Rear of Machine 351 in - -
    Length - Front Axle to Moldboard 100 in - -
    Length - Between Tandem Axles 60 in - -
    Width - Outside Rear Tires 98.9 in - -
    Width - Tire Center Lines 84.3 in - -
    Height - Front Axle Center 23.5 in - -
    Height - Exhaust Stack 128 in - -
    Height - Top of Cylinders 120 in - -
    Ground Clearance - Rear Axle 13.3 in - -
    Basic Blade Width - 140 in -
    Length of Machine* - 397.6 in -
    Width - 97.6 in -
    Note - *Typically equipped with push block and ripper. -
    Maximum Height - 132 in -

    Machine Weight
    Note - *Typically equipped with push block and ripper. -
    All-Wheel Drive (AWD) Weight - 44613 lb -
    Weight* - 42325 lb -

    Weights Tier 4/Stage IV/Japan 2014 (Tier 4 Final)*
    Gross Vehicle Weight - Maximum Tested - Total - - 84877 lb
    Gross Vehicle Weight - Base** - Total - - 63528 lb
    Gross Vehicle Weight - Typically Equipped - Rear Axle - - 52201 lb
    Gross Vehicle Weight - Typically Equipped - Total - - 71454 lb
    Gross Vehicle Weight - Maximum Tested - Front Axle - - 26125 lb
    Gross Vehicle Weight - Typically Equipped - Front Axle - - 19253 lb
    Gross Vehicle Weight - Maximum Tested - Rear Axle - - 58753 lb
    Gross Vehicle Weight - Base** - Front Axle - - 17932 lb
    Gross Vehicle Weight - Base** - Rear Axle - - 45596 lb
    Note (1) - - *For machines not equipped with Tier 4 Final emission engine, subtract 150 kg (331 lb) from rear axle weight and total weight.
    Note (2) - - **Base operating weight calculated on standard machine configuration with 23.5 R25 tires, full fuel tank operator and ROPS cab.

    Dimensions (Approximate)
    Ground Clearance - Rear Axle - - 15.6 in
    Length - Counterweight to Ripper - - 474.4 in
    Length - Front Axle to Moldboard - - 120.7 in
    Length - Front Axle to Mid Tandem - - 290 in
    Height - Top of Cylinders - - 121.6 in
    Width - Tire Center Lines - - 106.4 in
    Width - Outside Rear Tires - - 134.3 in
    Length - Between Tandem Axles - - 72.5 in
    Height - Top of Cab - - 146.4 in
    Width - Outside Front Tires - - 134.3 in
    Height - Front Axle Center - - 28.9 in
    Length - Front Tire to Rear of Machine - Including Tow Hitch - - 417 in
    Height - Exhaust Stack - - 140 in

    Variable Power Tier 4 Final/Stage IV/Japan 2014 (Tier 4 Final), Tier 3/Stage IIIA/Japan 2006 (Tier 3) or Tier 2/Stage II/Japan 2001 (Tier 2) - Net
    Gear - Reverse 3rd-6th - - 298 HP
    Gear - Forward 8th - - 348 HP
    Gear - Forward 3rd - - 298 HP
    Gear - Forward 6th - - 320 HP
    Gear - Forward 5th - - 311 HP
    Gear - Reverse 1st - - 290 HP
    Gear - Reverse 2nd - - 290 HP
    Gear - Forward 4th - - 304 HP
    Gear - Forward 7th - - 328 HP
    Gear - Forward 1st - - 290 HP
    Gear - Forward 2nd - - 290 HP

    Variable Power Tier 4 Final/Stage IV/Japan 2014 (Tier 4 Final), Tier 3/Stage IIIA/Japan 2006 (Tier 3) or Tier 2/Stage II/Japan 2001 (Tier 2) - Metric
    Gear - Forward 4th - - 309 HP
    Gear - Reverse 1st - - 294 HP
    Gear - Forward 3rd - - 302 HP
    Gear - Reverse 3rd-6th - - 302 HP
    Gear - Reverse 2nd - - 294 HP
    Gear - Forward 7th - - 332 HP
    Gear - Forward 6th - - 325 HP
    Gear - Forward 8th - - 353 HP
    Gear - Forward 1st - - 294 HP
    Gear - Forward 5th - - 315 HP
    Gear - Forward 2nd - - 294 HP

    Optional Tire Arrangements
    Wheel Group - 19.5×25 MP (1) - - Tires: 23.5R25 Bridgestone VKT 2 Star
    Wheel Group - 19.5×25 MP (2) - - Tires: 23.5R25 Bridgestone VKT 1 Star
    Wheel Group - 19.5×25 MP (3) - - Tires: 23.5R25 Bridgestone VJT 1 Star
    Wheel Group - 19.5×25 MP (4) - - Tires: 23.5R25 Michelin XHA 2 Star
    Wheel Group - 19.5×25 MP (5) - - Tires: 23.5R25 Michelin XLDD 2 Star L5
    Add a Similar Product: