CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    150 Motor Grader
    View Product
    140/140 AWD Motor Grader
    View Product Remove
    14 Motor Grader
    View Product Remove

    Engine
    Net Power Range (Tier 4) 200 HP 179 HP -
    Engine Model Cat® C9.3 Cat® C9.3 Cat C13
    Bore 4.5 in 4.5 in 5.1 in
    Stroke 5.9 in 5.9 in 6.2 in
    Speed at Rated Power 2,000 rpm 2,000 rpm 1,850 rpm
    Maximum Torque - VHP Plus 920 lb/ft 840 lb/ft 1137 lb/ft
    Emissions U.S. EPA Tier 4 Final/EU Stage V U.S. EPA Tier 4 Final/EU Stage V Tier 4 Final/Stage V, Tier 3/Stage IIIA equivalent or Tier 2/Stage II equivalent
    High Ambient - Fan Speed - Standard 1,400 rpm 1,400 rpm -
    VHP Plus Range - Net - Metric 149-188 kW (202-255 hp) 133-172 kW (181-234 hp) -
    Standard Capability 109 °F 109 °F 122 °F
    VHP Plus Range - Net 149-188 kW (200-252 hp) 133-172 kW (179-231 hp) -
    Torque Rise 39% 38% 41%
    VHP Plus - Gear - Net Power - Reverse 1st 200 HP 179 HP -
    VHP Plus - Gear - Net Power - Forward 1st 200 HP 179 HP -
    VHP Plus - Gear - Net Power - Forward 8th 252 HP 231 HP -
    VHP Plus - Gear - Net Power - Forward 6th 241 HP 220 HP -
    VHP Plus - Gear - Net Power - Forward 2nd 210 HP 189 HP -
    VHP Plus - Gear - Net Power - Forward 7th 247 HP 225 HP -
    VHP Plus - Gear - Net Power - Forward 5th 236 HP 215 HP -
    VHP Plus - Gear - Net Power - Reverse 3rd-6th 220 HP 200 HP -
    VHP Plus - Gear - Net Power - Forward 4th 231 HP 210 HP -
    Base Power (1st Gear) - Net - Metric 202 HP 181 HP -
    VHP Plus - Gear - Net Power - Reverse 2nd 210 HP 189 HP -
    VHP Plus - Gear - Net Power - Forward 3rd 220 HP 200 HP -
    Displacement 567.5 in³ 567.5 in³ 763 in³
    Number of Cylinders 6 6 6
    Derating Altitude 10000 ft 10000 ft -
    High Ambient - Fan Speed - Maximum 1,550 rpm 1,550 rpm -
    High Ambient - Fan Speed - Minimum 500 rpm 500 rpm -
    High - Ambient Capability 122 °F 122 °F -
    Base Power (1st Gear) - Net - - 238 HP
    Note (3) - - Net power advertised is the power available at rated speed of 1,850 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator.
    Note (2) - - Optimized VHP Plus is standard for the 14M3.
    Maximum Altitude - Full Power - - 13900 ft
    Maximum Altitude - Full Power (Tier 3) - - 14349 ft
    Maximum Altitude - Full Power (Tier 2) - - 12049 ft
    Note (1) - - Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 Standards in effect at the time of manufacture.
    Standard - Fan Speed - Minimum - - 550 rpm
    Note (4) - - Power as declared per ISO 14396. Rated rpm 1,850. VHP+ = 228 kW (306 hp)
    Note (5) - - Cat engines equipped with a Selective Catalytic Reduction (SCR) system are required to use: Diesel Exhaust Fluid (DEF) which meets the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.
    Standard - Fan Speed - Maximum - - 1,600 rpm

    Weights
    Operating Weight - Typically Equipped 43950 lb 42647 lb 57250 lb
    Gross Vehicle Weight - Maximum - Front Axle 17075 lb 17075 lb -
    Gross Vehicle Weight - Maximum - Rear Axle 38069 lb 38069 lb -
    Operating Weight - Typically Equipped - Front Axle 12549 lb 12055 lb -
    Operating Weight - Typically Equipped - Rear Axle 31401 lb 30592 lb -
    Gross Vehicle Weight - Base - Front Axle 9601 lb 9343 lb -
    Gross Vehicle Weight - Base - Rear Axle 28590 lb 28077 lb -
    Gross Vehicle Weight - Maximum - Total 55144 lb 55144 lb -
    Operating Weight - Typically Equipped - Total 43950 lb 42647 lb -
    Gross Vehicle Weight - Base - Total 38191 lb 37420 lb -
    Gross Vehicle Weight - Base* - Total - - 50980 lb
    Gross Vehicle Weight - Base* - Front Axle - - 13994 lb
    Gross Vehicle Weight - Typically Equipped - Total - - 57250 lb
    Gross Vehicle Weight - Typically Equipped - Rear Axle - - 42005 lb
    Gross Vehicle Weight - Typically Equipped - Front Axle - - 15245 lb
    Gross Vehicle Weight - Base* - Rear Axle - - 36994 lb
    Note - - *Base operating weight calculated on standard machine configuration with 20.5 R25 tires, full fuel tank operator and ROPS cab.

    Moldboard
    Blade Width 12 ft 12 ft 14 ft
    Moldboard - Height 24 in 24 in -
    Moldboard - Thickness 0.87 in 0.87 in -
    Arc Radius 16.3 in 16.3 in 16.3 in
    Throat Clearance 6.5 in 6.5 in 4.6 in
    Cutting Edge Width 6 in 6 in -
    Cutting Edge Thickness 0.6 in 0.6 in -
    End Bit - Width 6 in 6 in -
    End Bit - Thickness 0.6 in 0.6 in -
    Blade Pull - Base GVW 25732 lb 25269 lb -
    Blade Pull - Maximum GVW 34262 lb 34262 lb -
    Blade Down Pressure - Base GVW 16480 lb 16038 lb -
    Blade Down Pressure - Maximum GVW 29308 lb 29309 lb -
    Moldboard - Blade Width 12 ft 12 ft -
    Blade Width - With End Bits - - 169 in
    Blade Height - With Cutting Edge - - 24.9 in
    Blade Width - Without End Bits - - 164 in
    Blade Height - Without Cutting Edge - - 23 in

    Operating Specifications
    Top Speed - Forward 29 mile/h 29 mile/h -
    Top Speed - Reverse 23 mile/h 23 mile/h -
    Turning Radius - Outside Front Tires 25.59 ft 25.59 ft -
    Steering Range - Left/Right 50° 50° -
    Articulation Angle - Left/Right 20° 20° -
    Forward - 1st 2.5 mile/h 2.5 mile/h -
    Forward - 2nd 3.4 mile/h 3.4 mile/h -
    Forward - 3rd 5 mile/h 5 mile/h -
    Forward - 4th 6.9 mile/h 6.9 mile/h -
    Forward - 5th 10.6 mile/h 10.6 mile/h -
    Forward - 6th 14.5 mile/h 14.5 mile/h -
    Forward - 7th 19.9 mile/h 19.9 mile/h -
    Forward - 8th 29 mile/h 29 mile/h -
    Reverse - 1st 2 mile/h 2 mile/h -
    Reverse - 2nd 3.7 mile/h 3.7 mile/h -
    Reverse - 3rd 5.4 mile/h 5.4 mile/h -
    Reverse - 4th 8.4 mile/h 8.4 mile/h -
    Reverse - 5th 15.7 mile/h 15.7 mile/h -
    Reverse - 6th 23 mile/h 23 mile/h -

    Service Refill
    Fuel Capacity 104 gal (US) 104 gal (US) -
    Cooling System 15 gal (US) 15 gal (US) -
    Hydraulic System - Total 26.4 gal (US) 26.4 gal (US) -
    Hydraulic System - Tank 16.9 gal (US) 16.9 gal (US) -
    Transmission - Differential - Final Drives 18.5 gal (US) 18.5 gal (US) -
    Diesel Exhaust Fluid 5.8 gal (US) 5.8 gal (US) -
    Engine Oil 7.9 gal (US) 7.9 gal (US) -
    Tandem Housing - Each 20 gal (US) 20 gal (US) -
    Front Wheel Spindle Bearing Housing 0.13 gal (US) 0.13 gal (US) -
    Circle Drive Housing 1.8 gal (US) 1.8 gal (US) -

    Power Train
    Forward/Reverse Gears 8 Forward/6 Reverse 8 Forward/6 Reverse -
    Transmission APECS, Direct Drive, Powershift APECS, Direct Drive, Powershift -
    Brakes - Service Multiple Oil Disc Multiple Oil Disc -
    Brakes - Service - Surface Area 3565 in² 3565 in² -
    Brakes - Parking Multiple Oil Disc Multiple Oil Disc -
    Brakes - Secondary Dual Circuit Dual Circuit -

    Hydraulic System
    Circuit Type Parallel Parallel -
    Pump Type Variable Piston Variable Piston -
    Pump Output 55.7 gal/min 55.7 gal/min -
    Maximum System Pressure 3500 psi 3500 psi -
    Reservoir Tank Capacity 16.9 gal (US) 16.9 gal (US) -
    Standby Pressure 885 psi 885 psi -

    Frame
    Drawbar - Width 3 in 3 in -
    Circle - Diameter 60.2 in 60.2 in -
    Circle - Blade Beam Thickness 1.6 in 1.6 in -
    Drawbar - Height 6 in 6 in -
    Front Frame Structure - Width 12 in 12 in -
    Front Frame Structure - Height 12.6 in 12.6 in -
    Circle - Height 5.4 in 5.4 in -
    Drawbar - Thickness 0.5 in 0.5 in -
    Front-Top/Bottom Plate - Width 12 in 12 in -
    Front-Top/Bottom Plate - Thickness 0.87 in 0.87 in -
    Front Axle - Height to Center 23.5 in 23.5 in -
    Front Axle - Wheel Lean - Left/Right 18° 18° 17.1°
    Front Axle - Total Oscillation per Side 32° 32° 32°
    Circle - Outer Diameter - - 71.7 in

    Blade Range
    Circle Centershift - Right 28.7 in 28.7 in 20.5 in
    Circle Centershift - Left 27.4 in 27.4 in 25.6 in
    Moldboard Sideshift - Right 26 in 26 in 31.1 in
    Moldboard Sideshift - Left 20.1 in 20.1 in 29.1 in
    Maximum Blade Position Angle 90° 90° -
    Blade Tip Range - Forward 40° 40° 40°
    Blade Tip Range - Backward 5° 5° 5°
    Maximum Shoulder Reach Outside of Tires - Right 77.9 in 77.9 in 78.9 in
    Maximum Shoulder Reach Outside of Tires - Left 70.5 in 70.5 in 73.6 in
    Maximum Lift Above Ground 18.9 in 18.9 in 16.5 in
    Maximum Depth of Cut 28.1 in 28.1 in 23.3 in

    Ripper
    Ripper Shank Holder Spacing 21 in 21 in -
    Ripping Depth - Maximum 16.8 in 16.8 in -
    Ripper Shank Holders 5 5 -
    Penetration Force 20812 lb 20812 lb -
    Pry-Out Force 27794 lb 27794 lb -
    Machine Length Increase, Beam Raised 40.6 in 40.6 in -

    Scarifier
    Front, V-Type, 5 or 11 Tooth - Scarifier Shank Holders 11-May 11-May -
    Front, V-Type, 5 or 11 Tooth - Scarifying Depth, Maximum 18.4 in 18.4 in -
    Rear - Scarifying Depth, Maximum 16.8 in 16.8 in -
    Mid, V-Type - Working Width 46.6 in 46.6 in -
    Front, V-Type - Working Width 47.4 in 47.4 in -
    Front, V-Type, 5 or 11 Tooth - Working Width 40.6 in 40.6 in -
    Mid, V-Type - Scarifying Depth, Maximum 11.5 in 11.5 in -
    Mid, V-Type - Scarifier Shank Holders 11 11 -
    Mid, V-Type - Scarifier Shank Holder Spacing 4.6 in 4.6 in -
    Front, V-Type, 5 or 11 Tooth - Scarifier Shank Holder Spacing 4.6 in 4.6 in -
    Rear - Working Width 84 in 84 in -
    Rear - Scarifier Shank Holders 9 9 -
    Rear - Scarifier Shank Holder Spacing 10.5 in 10.5 in -

    Standards
    Steering ISO 5010 ISO 5010 -
    ROPS/FOPS ISO 3471/ISO 3449 ISO 3471/ISO 3449 -
    Brakes ISO 3450 ISO 3450 -
    Sound ISO 6394; ISO 6395 ISO 6394; ISO 6395 -

    Air Conditioning System
    Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes. - The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 2.0 kg (4.4 lb) of refrigerant which has a CO2 equivalent of 2.860 metric tonne (2.76 ton).

    Tandems
    Height 19.9 in 19.9 in -
    Width 7.9 in 7.9 in -
    Sidewall Thickness - Inner 0.63 in 0.63 in -
    Sidewall Thickness - Outer 0.71 in 0.71 in -
    Drive Chain Pitch 2 in 2 in -
    Wheel Axle Spacing 60 in 60 in -
    Tandem Oscillation - Front Up 15° 15° -
    Tandem Oscillation - Front Down 25° 25° -

    Dimensions
    Height - Top of Cab 130 in 130 in -
    Length - Counterweight to Ripper 399 in 399 in -
    Width - Outside Front Tires 98.9 in 98.9 in -
    Length - Front Axle to Mid Tandem 241 in 241 in -
    Length - Front Tire to Rear of Machine 351 in 351 in -
    Length - Front Axle to Moldboard 100 in 100 in -
    Length - Between Tandem Axles 60 in 60 in -
    Width - Outside Rear Tires 98.9 in 98.9 in -
    Width - Tire Center Lines 84.3 in 84.3 in -
    Height - Front Axle Center 23.5 in 23.5 in -
    Height - Exhaust Stack 128 in 128 in -
    Height - Top of Cylinders 120 in 120 in -
    Ground Clearance - Rear Axle 13.3 in 13.3 in -

    Service Refill Capacities
    Transmission and Differential - - 23.5 gal (US)
    Diesel Exhaust Fluid Tank (Tier 4 Only) - - 5.8 gal (US)
    Hydraulic System - - 33 gal (US)
    Circle Drive - - 1.8 gal (US)
    Cooling System - - 15.9 gal (US)
    Fuel Tank - - 109.9 gal (US)
    Add a Similar Product: