CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    140 GC Motor Grader
    View Product
    140 Motor Grader LVR
    View Product Remove
    140/140 AWD Motor Grader
    View Product Remove
    120 GC
    View Product Remove

    Engine
    Engine Power (ISO 14396) 196 HP - - -
    Bore 4.1 in 4.5 in 4.5 in 4.1 in
    Derating Altitude 9842 ft - 10000 ft 9842 ft
    Displacement 427.8 in³ 567.5 in³ 567.5 in³ 268.5 in³
    Emissions U.S. EPA Tier 4 Final/EU Stage V U.S. EPA Tier 4 Final/EU Stage V U.S. EPA Tier 4 Final/EU Stage V Meets U.S. EPA Tier 4 Final, EU Stage V and Korea Tier 5 emission standards
    Engine Model Cat 7.1 Cat C9.3 Cat® C9.3 Cat® C4.4
    Engine RPM 2,200 2,000 - -
    Standard Capability 109 °F 109 °F 109 °F -
    High - Ambient Capability 122 °F - 122 °F -
    Maximum Torque - ISO 9249 616 lb/ft - - -
    Stroke 5.3 in 5.9 in 5.9 in 5 in
    Torque Rise - ISO 9294 40% 44% - 21%
    Number of Cylinders 6 6 6 -
    Note (1) Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 standards in effect at the time of manufacture. - - Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 standards in effect at the time of manufacture. Net power advertised is the power available at rated speed of 2,000 rpm, measured at the flywheel when engine is equipped with fan, air cleaner,
    Note (2) Net power advertised is the power available at rated speed of 2,200 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator. - - -
    Note (3) Power as declared per ISO 14396 - - -
    Engine Power AWD (ISO 14396) 196 HP - - 128 kW
    Net Power - EEC 80/1269 - 250 HP - -
    Net Power - ISO 9249/SAE J1349 - 250 HP - 171 HP
    Net Power Range (Tier 4) - - 179 HP -
    Speed at Rated Power - - 2,000 rpm -
    Maximum Torque - VHP Plus - - 840 lb/ft -
    VHP Plus - Gear - Net Power - Reverse 3rd-6th - - 200 HP -
    VHP Plus - Gear - Net Power - Forward 2nd - - 189 HP -
    VHP Plus - Gear - Net Power - Forward 5th - - 215 HP -
    VHP Plus - Gear - Net Power - Forward 3rd - - 200 HP -
    VHP Plus - Gear - Net Power - Forward 8th - - 231 HP -
    Torque Rise - - 38% -
    VHP Plus - Gear - Net Power - Reverse 2nd - - 189 HP -
    VHP Plus - Gear - Net Power - Forward 1st - - 179 HP -
    VHP Plus - Gear - Net Power - Forward 6th - - 220 HP -
    VHP Plus - Gear - Net Power - Reverse 1st - - 179 HP -
    VHP Plus Range - Net - - 133-172 kW (179-231 hp) -
    VHP Plus - Gear - Net Power - Forward 7th - - 225 HP -
    VHP Plus Range - Net - Metric - - 133-172 kW (181-234 hp) -
    VHP Plus - Gear - Net Power - Forward 4th - - 210 HP -
    Base Power (1st Gear) - Net - Metric - - 181 HP -
    High Ambient - Fan Speed - Standard - - 1,400 rpm -
    High Ambient - Fan Speed - Maximum - - 1,550 rpm -
    High Ambient - Fan Speed - Minimum - - 500 rpm -
    Maximum Torque - - - 544 lb/ft

    Weights
    Operating Weight - Typically Equipped 38912 lb 20236 lb 42647 lb 31958 lb
    Note * Typically equipped operating weight is calculated with full fuel tank, coolant, lubricants, operator, push block, rear ripper, tires on multi-piece rims (*17.5-25 Bias/**17.5R-25), and other equipment. - - -
    Gross Vehicle Weight - Maximum - Front Axle - - 17075 lb -
    Gross Vehicle Weight - Maximum - Rear Axle - - 38069 lb -
    Operating Weight - Typically Equipped - Front Axle - - 12055 lb -
    Operating Weight - Typically Equipped - Rear Axle - - 30592 lb -
    Gross Vehicle Weight - Base - Front Axle - - 9343 lb -
    Gross Vehicle Weight - Base - Rear Axle - - 28077 lb -
    Gross Vehicle Weight - Maximum - Total - - 55144 lb -
    Gross Vehicle Weight - Base - Total - - 37420 lb -
    Operating Weight - Typically Equipped - Total - - 42647 lb -

    Moldboard
    Blade Width 12 ft 12 ft 12 ft 12 ft
    Arc Radius 16.3 in 16.3 in 16.3 in 16.3 in
    Blade Height 24 in - - 20 in
    Cutting Edge Width 6 in - 6 in 6 in
    End Bit 6 in 6 in - -
    Throat Clearance 4.4 in 6.5 in 6.5 in 4.7 in
    Cutting Edge - 6 in - -
    Moldboard - Height - - 24 in -
    Moldboard - Thickness - - 0.87 in -
    Cutting Edge Thickness - - 0.6 in -
    End Bit - Width - - 6 in 152 in
    End Bit - Thickness - - 0.6 in -
    Blade Pull - Base GVW - - 25269 lb -
    Blade Pull - Maximum GVW - - 34262 lb -
    Blade Down Pressure - Base GVW - - 16038 lb -
    Blade Down Pressure - Maximum GVW - - 29309 lb -
    Moldboard - Blade Width - - 12 ft -

    Air Conditioning System
    Note The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430).The system contains 2.0 kg of refrigerant which has a CO2 equivalent of 2.86 metric tonnes. - - -

    Dimensions
    Width All Wheel Drive (AWD) 99.3 in - - -
    Length of Machine* 406.7 in 397.6 in - 391.4 in
    Maximum Height 132.4 in 132 in - 149.1 in
    Width 95.6 in 97.6 in - 94.6 in
    Note *Typically equipped with push block and ripper. *Typically equipped with push block and ripper. - *Typically equipped with push block and ripper.
    Basic Blade Width - 140 in - -
    Height - Top of Cab - - 130 in -
    Length - Counterweight to Ripper - - 399 in -
    Width - Outside Front Tires - - 98.9 in -
    Length - Front Axle to Mid Tandem - - 241 in -
    Length - Front Tire to Rear of Machine - - 351 in -
    Length - Front Axle to Moldboard - - 100 in -
    Length - Between Tandem Axles - - 60 in -
    Width - Outside Rear Tires - - 98.9 in -
    Width - Tire Center Lines - - 84.3 in -
    Height - Front Axle Center - - 23.5 in -
    Height - Exhaust Stack - - 128 in -
    Height - Top of Cylinders - - 120 in -
    Ground Clearance - Rear Axle - - 13.3 in -

    Blade Range
    Circle Center Shift Left 29.6 in - - -
    Circle Center Shift Right 28.7 in - - -
    Maximum Depth of Cut 28.1 in 28.9 in 28.1 in 30.5 in
    Maximum Lift Above Ground 18.7 in 18.9 in 18.9 in 16.1 in
    Maximum Shoulder Reach Left 74.3 in - - -
    Maximum Shoulder Reach Right 71.3 in - - -
    Moldboard Side Shift Left 25.6 in - - -
    Moldboard Side Shift Right 20.7 in - - -
    Blade Tip Range Backward 5 - - -
    Blade Tip Range Forward 40 - - -
    Circle Centershift - Right - - 28.7 in 25.8 in
    Circle Centershift - Left - - 27.4 in 25.8 in
    Moldboard Sideshift - Right - - 26 in 26.1 in
    Moldboard Sideshift - Left - - 20.1 in 20.2 in
    Maximum Blade Position Angle - - 90° -
    Blade Tip Range - Forward - - 40° 40°
    Blade Tip Range - Backward - - 5° 5°
    Maximum Shoulder Reach Outside of Tires - Right - - 77.9 in -
    Maximum Shoulder Reach Outside of Tires - Left - - 70.5 in -

    Service Refill Capacities
    Fuel Tank 78 gal (US) - - 71 gal (US)
    Circle Drive with Slip Clutch 2 gal (US) - - 1.8 gal (US)
    Circle Drive without Slip Clutch 0.5 gal (US) - - 0.4 gal (US)
    Cooling System 40 l - - 10.3 gal (US)
    Engine Crankcase 5.5 gal (US) - - 2 gal (US)
    Diesel Exhaust Fluid Tank (Tier 4 Only) 4.2 gal (US) - - 3.2 gal (US)
    Hydraulic System 11.9 gal (US) - - 14.5 gal (US)
    Transmission 4.8 gal (US) - - 4.5 gal (US)

    Weight
    Weight (Tier 4 Final)** 40488 lb - - -
    All-wheel Drive Weight (AWD) (Tier 4 Final)** 42119 lb - - -
    All-Wheel Drive Weight (AWD) (Stage V)* 40543 lb - - -
    Weight (Stage V)* 38912 lb - - -

    Service Refill
    Hydraulic System - 14.5 gal (US) - -
    Engine Crankcase - 7.9 gal (US) - -
    Circle Drive - 1.8 gal (US) - -
    Fuel Tank - 100 gal (US) - -
    Front Wheel Spindle Bearing - Each - 0.13 gal (US) - -
    Fuel Capacity - - 104 gal (US) -
    Cooling System - - 15 gal (US) -
    Hydraulic System - Total - - 26.4 gal (US) -
    Hydraulic System - Tank - - 16.9 gal (US) -
    Diesel Exhaust Fluid - - 5.8 gal (US) -
    Transmission - Differential - Final Drives - - 18.5 gal (US) -
    Engine Oil - - 7.9 gal (US) -
    Tandem Housing - Each - - 20 gal (US) -
    Front Wheel Spindle Bearing Housing - - 0.13 gal (US) -
    Circle Drive Housing - - 1.8 gal (US) -

    Machine Weight
    Note - *Typically equipped with push block and ripper. - -
    All-Wheel Drive (AWD) Weight - 44613 lb - 36376 lb
    Weight* - 42325 lb - -

    Operating Specifications
    Top Speed - Forward - - 29 mile/h -
    Top Speed - Reverse - - 23 mile/h -
    Turning Radius - Outside Front Tires - - 25.59 ft -
    Steering Range - Left/Right - - 50° -
    Articulation Angle - Left/Right - - 20° -
    Forward - 1st - - 2.5 mile/h -
    Forward - 2nd - - 3.4 mile/h -
    Forward - 3rd - - 5 mile/h -
    Forward - 4th - - 6.9 mile/h -
    Forward - 5th - - 10.6 mile/h -
    Forward - 6th - - 14.5 mile/h -
    Forward - 7th - - 19.9 mile/h -
    Forward - 8th - - 29 mile/h -
    Reverse - 1st - - 2 mile/h -
    Reverse - 2nd - - 3.7 mile/h -
    Reverse - 3rd - - 5.4 mile/h -
    Reverse - 4th - - 8.4 mile/h -
    Reverse - 5th - - 15.7 mile/h -
    Reverse - 6th - - 23 mile/h -

    Power Train
    Forward/Reverse Gears - - 8 Forward/6 Reverse -
    Transmission - - APECS, Direct Drive, Powershift -
    Brakes - Service - - Multiple Oil Disc -
    Brakes - Service - Surface Area - - 3565 in² -
    Brakes - Parking - - Multiple Oil Disc -
    Brakes - Secondary - - Dual Circuit -

    Hydraulic System
    Circuit Type - - Parallel -
    Pump Type - - Variable Piston -
    Pump Output - - 55.7 gal/min -
    Maximum System Pressure - - 3500 psi -
    Reservoir Tank Capacity - - 16.9 gal (US) -
    Standby Pressure - - 885 psi -

    Frame
    Drawbar - Width - - 3 in -
    Circle - Diameter - - 60.2 in -
    Circle - Blade Beam Thickness - - 1.6 in -
    Drawbar - Height - - 6 in -
    Front Frame Structure - Height - - 12.6 in -
    Circle - Height - - 5.4 in -
    Front Frame Structure - Width - - 12 in -
    Drawbar - Thickness - - 0.5 in -
    Front-Top/Bottom Plate - Width - - 12 in -
    Front-Top/Bottom Plate - Thickness - - 0.87 in -
    Front Axle - Height to Center - - 23.5 in -
    Front Axle - Wheel Lean - Left/Right - - 18° -
    Front Axle - Total Oscillation per Side - - 32° -

    Ripper
    Ripping Depth - Maximum - - 16.8 in -
    Ripper Shank Holder Spacing - - 21 in -
    Ripper Shank Holders - - 5 -
    Penetration Force - - 20812 lb -
    Pry-Out Force - - 27794 lb -
    Machine Length Increase, Beam Raised - - 40.6 in -

    Scarifier
    Front, V-Type, 5 or 11 Tooth - Scarifier Shank Holder Spacing - - 4.6 in -
    Front, V-Type, 5 or 11 Tooth - Scarifying Depth, Maximum - - 18.4 in -
    Mid, V-Type - Scarifier Shank Holders - - 11 -
    Rear - Scarifying Depth, Maximum - - 16.8 in -
    Front, V-Type, 5 or 11 Tooth - Working Width - - 40.6 in -
    Front, V-Type - Working Width - - 47.4 in -
    Mid, V-Type - Working Width - - 46.6 in -
    Mid, V-Type - Scarifying Depth, Maximum - - 11.5 in -
    Mid, V-Type - Scarifier Shank Holder Spacing - - 4.6 in -
    Front, V-Type, 5 or 11 Tooth - Scarifier Shank Holders - - 11-May -
    Rear - Working Width - - 84 in -
    Rear - Scarifier Shank Holders - - 9 -
    Rear - Scarifier Shank Holder Spacing - - 10.5 in -

    Standards
    Brakes - - ISO 3450 -
    Sound - - ISO 6394; ISO 6395 -
    Steering - - ISO 5010 -
    ROPS/FOPS - - ISO 3471/ISO 3449 -

    Tandems
    Height - - 19.9 in -
    Width - - 7.9 in -
    Sidewall Thickness - Inner - - 0.63 in -
    Sidewall Thickness - Outer - - 0.71 in -
    Drive Chain Pitch - - 2 in -
    Wheel Axle Spacing - - 60 in -
    Tandem Oscillation - Front Up - - 15° -
    Tandem Oscillation - Front Down - - 25° -

    Sustainability
    Recyclability - - - 92%
    Add a Similar Product: