|
|
|
|
Engine |
| Engine Power (ISO 14396) |
196 HP |
- |
- |
| Bore |
4.1 in |
4.5 in |
4.1 in |
| Derating Altitude |
9842 ft |
- |
9842 ft |
| Displacement |
427.8 in³ |
567.5 in³ |
268.5 in³ |
| Emissions |
U.S. EPA Tier 4 Final/EU Stage V |
U.S. EPA Tier 4 Final/EU Stage V |
Meets U.S. EPA Tier 4 Final, EU Stage V and Korea Tier 5 emission standards |
| Engine Model |
Cat 7.1 |
Cat C9.3 |
Cat® C4.4 |
| Engine RPM |
2,200 |
2,000 |
- |
| Standard Capability |
109 °F |
109 °F |
- |
| High - Ambient Capability |
122 °F |
- |
- |
| Maximum Torque - ISO 9249 |
616 lb/ft |
- |
- |
| Stroke |
5.3 in |
5.9 in |
5 in |
| Torque Rise - ISO 9294 |
40% |
44% |
21% |
| Number of Cylinders |
6 |
6 |
- |
| Note (1) |
Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 standards in effect at the time of manufacture. |
- |
Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 standards in effect at the time of manufacture. Net power advertised is the power available at rated speed of 2,000 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, |
| Note (2) |
Net power advertised is the power available at rated speed of 2,200 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator. |
- |
- |
| Note (3) |
Power as declared per ISO 14396 |
- |
- |
| Engine Power AWD (ISO 14396) |
196 HP |
- |
128 kW |
| Net Power - EEC 80/1269 |
- |
250 HP |
- |
| Net Power - ISO 9249/SAE J1349 |
- |
250 HP |
171 HP |
| Maximum Torque |
- |
- |
544 lb/ft |
Weights |
| Operating Weight - Typically Equipped |
38912 lb |
20236 lb |
14496 lb |
| Note |
* Typically equipped operating weight is calculated with full fuel tank, coolant, lubricants, operator, push block, rear ripper, tires on multi-piece rims (*17.5-25 Bias/**17.5R-25), and other equipment. |
- |
- |
Moldboard |
| Blade Width |
12 ft |
12 ft |
12 ft |
| Arc Radius |
16.3 in |
16.3 in |
16.3 in |
| Blade Height |
24 in |
- |
20 in |
| Cutting Edge Width |
6 in |
- |
6 in |
| End Bit |
6 in |
6 in |
- |
| Throat Clearance |
4.4 in |
6.5 in |
4.7 in |
| Cutting Edge |
- |
6 in |
- |
| End Bit - Width |
- |
- |
152 in |
Air Conditioning System |
| Note |
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430).The system contains 2.0 kg of refrigerant which has a CO2 equivalent of 2.86 metric tonnes. |
- |
- |
Dimensions |
| Width All Wheel Drive (AWD) |
99.3 in |
- |
- |
| Length of Machine* |
406.7 in |
397.6 in |
391.4 in |
| Maximum Height |
132.4 in |
132 in |
149.1 in |
| Width |
95.6 in |
97.6 in |
94.6 in |
| Note |
*Typically equipped with push block and ripper. |
*Typically equipped with push block and ripper. |
*Typically equipped with push block and ripper. |
| Basic Blade Width |
- |
140 in |
- |
Blade Range |
| Circle Center Shift Left |
29.6 in |
- |
- |
| Circle Center Shift Right |
28.7 in |
- |
- |
| Maximum Depth of Cut |
28.1 in |
28.9 in |
30.5 in |
| Maximum Lift Above Ground |
18.7 in |
18.9 in |
16.1 in |
| Maximum Shoulder Reach Left |
74.3 in |
- |
- |
| Maximum Shoulder Reach Right |
71.3 in |
- |
- |
| Moldboard Side Shift Left |
25.6 in |
- |
- |
| Moldboard Side Shift Right |
20.7 in |
- |
- |
| Blade Tip Range Backward |
5 |
- |
- |
| Blade Tip Range Forward |
40 |
- |
- |
| Blade Tip Range - Backward |
- |
- |
5° |
| Moldboard Sideshift - Right |
- |
- |
26.1 in |
| Moldboard Sideshift - Left |
- |
- |
20.2 in |
| Circle Centershift - Left |
- |
- |
25.8 in |
| Blade Tip Range - Forward |
- |
- |
40° |
| Circle Centershift - Right |
- |
- |
25.8 in |
Service Refill Capacities |
| Fuel Tank |
78 gal (US) |
- |
71 gal (US) |
| Circle Drive with Slip Clutch |
2 gal (US) |
- |
1.8 gal (US) |
| Circle Drive without Slip Clutch |
0.5 gal (US) |
- |
0.4 gal (US) |
| Cooling System |
40 l |
- |
10.3 gal (US) |
| Engine Crankcase |
5.5 gal (US) |
- |
2 gal (US) |
| Diesel Exhaust Fluid Tank (Tier 4 Only) |
4.2 gal (US) |
- |
3.2 gal (US) |
| Hydraulic System |
11.9 gal (US) |
- |
14.5 gal (US) |
| Transmission |
4.8 gal (US) |
- |
4.5 gal (US) |
Weight |
| Weight (Tier 4 Final)** |
40488 lb |
- |
- |
| All-wheel Drive Weight (AWD) (Tier 4 Final)** |
42119 lb |
- |
- |
| All-Wheel Drive Weight (AWD) (Stage V)* |
40543 lb |
- |
- |
| Weight (Stage V)* |
38912 lb |
- |
- |
Service Refill |
| Hydraulic System |
- |
14.5 gal (US) |
- |
| Engine Crankcase |
- |
7.9 gal (US) |
- |
| Circle Drive |
- |
1.8 gal (US) |
- |
| Fuel Tank |
- |
100 gal (US) |
- |
| Front Wheel Spindle Bearing - Each |
- |
0.13 gal (US) |
- |
Machine Weight |
| Note |
- |
*Typically equipped with push block and ripper. |
- |
| All-Wheel Drive (AWD) Weight |
- |
44613 lb |
36376 lb |
| Weight* |
- |
42325 lb |
- |
Sustainability |
| Recyclability |
- |
- |
92% |
