CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    140 GC Motor Grader
    View Product
    140 Motor Grader LVR
    View Product Remove
    120 - 2019 - N Am, Global
    View Product Remove
    24 Motor Grader
    View Product Remove

    Engine
    Engine Power (ISO 14396) 196 HP - - -
    Bore 4.1 in 4.5 in 4.1 in 5.4 in
    Derating Altitude 9842 ft - 9842.5 ft -
    Displacement 427.8 in³ 567.5 in³ 427.8 in³ 1648 in³
    Emissions U.S. EPA Tier 4 Final/EU Stage V U.S. EPA Tier 4 Final/EU Stage V U.S. EPA Tier 4 Final/EU Stage V - U.S. EPA Tier 3/EU Stage IIIA Tier 4 Final/Stage IV or Equivalent to Tier 2/Stage II
    Engine Model Cat 7.1 Cat C9.3 Cat 7.1 Cat C27
    Engine RPM 2,200 2,000 2,000 -
    Standard Capability 109 °F 109 °F 122 °F 122 °F
    High - Ambient Capability 122 °F - - -
    Maximum Torque - ISO 9249 616 lb/ft - 606 lb/ft -
    Stroke 5.3 in 5.9 in 5.3 in 6 in
    Torque Rise - ISO 9294 40% 44% 42% -
    Number of Cylinders 6 6 6 12
    Note (1) Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 standards in effect at the time of manufacture. - Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 Standards in effect at the time of manufacture." Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 Standards in effect at the time of manufacture.
    Note (2) Net power advertised is the power available at rated speed of 2,200 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator. - Net power advertised is the power available at rated speed of 2,000 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator. Optimized VHP Plus is standard for the 24.
    Note (3) Power as declared per ISO 14396 - Power as declared per ISO 14396 Net power advertised is the power available at rated speed of 1,800 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator.
    Engine Power AWD (ISO 14396) 196 HP - - -
    Net Power - EEC 80/1269 - 250 HP - 535 HP
    Net Power - ISO 9249/SAE J1349 - 250 HP - -
    All-Wheel Drive Net Power Range (Tier 3) - - 130 HP -
    Net Power Range (Tier 3) - - 130 HP -
    Maximum Torque - AWD On - - 611 lb/ft -
    Derating Altitude (AWD) - - 5499 ft -
    Note (4) - - - Power as declared per ISO 14396. Rated rpm 1,800 (561 hp)

    Weights
    Operating Weight - Typically Equipped 38912 lb 20236 lb 35067 lb 165314 lb
    Note * Typically equipped operating weight is calculated with full fuel tank, coolant, lubricants, operator, push block, rear ripper, tires on multi-piece rims (*17.5-25 Bias/**17.5R-25), and other equipment. - - -

    Moldboard
    Blade Width 12 ft 12 ft 12 ft 24 ft
    Arc Radius 16.3 in 16.3 in 16.3 in -
    Blade Height 24 in - 24 in 40 in
    Cutting Edge Width 6 in - - -
    End Bit 6 in 6 in 6 in -
    Throat Clearance 4.4 in 6.5 in 4.1 in -
    Cutting Edge - 6 in 6 in -

    Air Conditioning System
    Note The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430).The system contains 2.0 kg of refrigerant which has a CO2 equivalent of 2.86 metric tonnes. - The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.6 kg of refrigerant which has a carbon dioxide equivalent of 2.288 metric tonnes. -

    Dimensions
    Width All Wheel Drive (AWD) 99.3 in - 2551 mm -
    Length of Machine* 406.7 in 397.6 in 387 in -
    Maximum Height 132.4 in 132 in 136.4 in -
    Width 95.6 in 97.6 in 102 in -
    Note *Typically equipped with push block and ripper. *Typically equipped with push block and ripper. *Typically equipped with push block and ripper. -
    Basic Blade Width - 140 in 12 ft -

    Blade Range
    Circle Center Shift Left 29.6 in - 26 in -
    Circle Center Shift Right 28.7 in - 26 in -
    Maximum Depth of Cut 28.1 in 28.9 in 30.5 in 21.7 in
    Maximum Lift Above Ground 18.7 in 18.9 in 16.1 in 16.1 in
    Maximum Shoulder Reach Left 74.3 in - 69.4 in -
    Maximum Shoulder Reach Right 71.3 in - 76 in -
    Moldboard Side Shift Left 25.6 in - 20.1 in -
    Moldboard Side Shift Right 20.7 in - 26.1 in -
    Blade Tip Range Backward 5 - 5 -
    Blade Tip Range Forward 40 - 40 -

    Service Refill Capacities
    Fuel Tank 78 gal (US) - 65 gal (US) -
    Circle Drive with Slip Clutch 2 gal (US) - - -
    Circle Drive without Slip Clutch 0.5 gal (US) - - -
    Cooling System 40 l - 14 gal (US) -
    Engine Crankcase 5.5 gal (US) - 4.8 gal (US) -
    Diesel Exhaust Fluid Tank (Tier 4 Only) 4.2 gal (US) - 5 gal (US) -
    Hydraulic System 11.9 gal (US) - 25.6 gal (US) -
    Transmission 4.8 gal (US) - - -
    Transmission and Differential - - 9 gal (US) -
    Circle Drive - - 1.8 gal (US) -

    Weight
    Weight (Tier 4 Final)** 40488 lb - - -
    All-wheel Drive Weight (AWD) (Tier 4 Final)** 42119 lb - - -
    All-Wheel Drive Weight (AWD) (Stage V)* 40543 lb - - -
    Weight (Stage V)* 38912 lb - - -

    Service Refill
    Hydraulic System - 14.5 gal (US) - -
    Engine Crankcase - 7.9 gal (US) - -
    Circle Drive - 1.8 gal (US) - -
    Fuel Tank - 100 gal (US) - -
    Front Wheel Spindle Bearing - Each - 0.13 gal (US) - -

    Machine Weight
    Note - *Typically equipped with push block and ripper. - -
    All-Wheel Drive (AWD) Weight - 44613 lb - -
    Weight* - 42325 lb - 161695 lb
    Lever/Steering Wheel All-Wheel drive (AWD) Weight* Tier 4 - - 36731 lb -
    Note (1) - - *Typically equipped includes 4267 mm (14 ft) plus blade, tires, push plate, ripper, bottom guard, operator, and full fluids. -
    Joystick Weight* Tier 4 - - 35358 lb -
    Joystick All-Wheel Drive (AWD) Weight* Tier 4 - - 36846 lb -
    Lever/Steering Wheel Weight* Tier 4 - - 35067 lb -
    Add a Similar Product: