|
|
|
|
Engine |
| Net Power - EEC 80/1269 |
250 HP |
- |
- |
| Net Power - ISO 9249/SAE J1349 |
250 HP |
171 HP |
- |
| Standard Capability |
109 °F |
- |
109 °F |
| Engine RPM |
2,000 |
- |
2,200 |
| Engine Model |
Cat C9.3 |
Cat® C4.4 |
Cat 7.1 |
| Bore |
4.5 in |
4.1 in |
4.1 in |
| Emissions |
U.S. EPA Tier 4 Final/EU Stage V |
Meets U.S. EPA Tier 4 Final, EU Stage V and Korea Tier 5 emission standards |
U.S. EPA Tier 4 Final/EU Stage V |
| Displacement |
567.5 in³ |
268.5 in³ |
427.8 in³ |
| Stroke |
5.9 in |
5 in |
5.3 in |
| Number of Cylinders |
6 |
- |
6 |
| Torque Rise - ISO 9294 |
44% |
21% |
40% |
| Derating Altitude |
- |
9842 ft |
9842 ft |
| Maximum Torque |
- |
544 lb/ft |
- |
| Engine Power AWD (ISO 14396) |
- |
128 kW |
196 HP |
| Note (1) |
- |
Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 standards in effect at the time of manufacture. Net power advertised is the power available at rated speed of 2,000 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, |
Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 standards in effect at the time of manufacture. |
| Engine Power (ISO 14396) |
- |
- |
196 HP |
| High - Ambient Capability |
- |
- |
122 °F |
| Maximum Torque - ISO 9249 |
- |
- |
616 lb/ft |
| Note (2) |
- |
- |
Net power advertised is the power available at rated speed of 2,200 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator. |
| Note (3) |
- |
- |
Power as declared per ISO 14396 |
Weights |
| Operating Weight - Typically Equipped |
20236 lb |
14496 lb |
38912 lb |
| Note |
- |
- |
* Typically equipped operating weight is calculated with full fuel tank, coolant, lubricants, operator, push block, rear ripper, tires on multi-piece rims (*17.5-25 Bias/**17.5R-25), and other equipment. |
Moldboard |
| Blade Width |
12 ft |
12 ft |
12 ft |
| Cutting Edge |
6 in |
- |
- |
| Arc Radius |
16.3 in |
16.3 in |
16.3 in |
| Throat Clearance |
6.5 in |
4.7 in |
4.4 in |
| End Bit |
6 in |
- |
6 in |
| Cutting Edge Width |
- |
6 in |
6 in |
| End Bit - Width |
- |
152 in |
- |
| Blade Height |
- |
20 in |
24 in |
Dimensions |
| Basic Blade Width |
140 in |
- |
- |
| Length of Machine* |
397.6 in |
391.4 in |
406.7 in |
| Width |
97.6 in |
94.6 in |
95.6 in |
| Note |
*Typically equipped with push block and ripper. |
*Typically equipped with push block and ripper. |
*Typically equipped with push block and ripper. |
| Maximum Height |
132 in |
149.1 in |
132.4 in |
| Width All Wheel Drive (AWD) |
- |
- |
99.3 in |
Service Refill |
| Hydraulic System |
14.5 gal (US) |
- |
- |
| Engine Crankcase |
7.9 gal (US) |
- |
- |
| Circle Drive |
1.8 gal (US) |
- |
- |
| Fuel Tank |
100 gal (US) |
- |
- |
| Front Wheel Spindle Bearing - Each |
0.13 gal (US) |
- |
- |
Machine Weight |
| Note |
*Typically equipped with push block and ripper. |
- |
- |
| All-Wheel Drive (AWD) Weight |
44613 lb |
36376 lb |
- |
| Weight* |
42325 lb |
- |
- |
Blade Range |
| Maximum Lift Above Ground |
18.9 in |
16.1 in |
18.7 in |
| Maximum Depth of Cut |
28.9 in |
30.5 in |
28.1 in |
| Blade Tip Range - Backward |
- |
5° |
- |
| Moldboard Sideshift - Right |
- |
26.1 in |
- |
| Moldboard Sideshift - Left |
- |
20.2 in |
- |
| Circle Centershift - Left |
- |
25.8 in |
- |
| Blade Tip Range - Forward |
- |
40° |
- |
| Circle Centershift - Right |
- |
25.8 in |
- |
| Circle Center Shift Left |
- |
- |
29.6 in |
| Circle Center Shift Right |
- |
- |
28.7 in |
| Maximum Shoulder Reach Left |
- |
- |
74.3 in |
| Maximum Shoulder Reach Right |
- |
- |
71.3 in |
| Moldboard Side Shift Left |
- |
- |
25.6 in |
| Moldboard Side Shift Right |
- |
- |
20.7 in |
| Blade Tip Range Backward |
- |
- |
5 |
| Blade Tip Range Forward |
- |
- |
40 |
Service Refill Capacities |
| Cooling System |
- |
10.3 gal (US) |
40 l |
| Circle Drive without Slip Clutch |
- |
0.4 gal (US) |
0.5 gal (US) |
| Hydraulic System |
- |
14.5 gal (US) |
11.9 gal (US) |
| Circle Drive with Slip Clutch |
- |
1.8 gal (US) |
2 gal (US) |
| Transmission |
- |
4.5 gal (US) |
4.8 gal (US) |
| Diesel Exhaust Fluid Tank (Tier 4 Only) |
- |
3.2 gal (US) |
4.2 gal (US) |
| Fuel Tank |
- |
71 gal (US) |
78 gal (US) |
| Engine Crankcase |
- |
2 gal (US) |
5.5 gal (US) |
Sustainability |
| Recyclability |
- |
92% |
- |
Air Conditioning System |
| Note |
- |
- |
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430).The system contains 2.0 kg of refrigerant which has a CO2 equivalent of 2.86 metric tonnes. |
Weight |
| Weight (Tier 4 Final)** |
- |
- |
40488 lb |
| All-wheel Drive Weight (AWD) (Tier 4 Final)** |
- |
- |
42119 lb |
| All-Wheel Drive Weight (AWD) (Stage V)* |
- |
- |
40543 lb |
| Weight (Stage V)* |
- |
- |
38912 lb |
