CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    140 Motor Grader LVR
    View Product
    150 Motor Grader
    View Product Remove
    120
    View Product Remove
    24 Motor Grader
    View Product Remove

    Engine
    Net Power - EEC 80/1269 250 hp - - 535 hp
    Net Power - ISO 9249/SAE J1349 250 hp - 130 hp -
    Standard Capability 109 °F 109 °F 122 °F 122 °F
    Engine RPM 2,000 - 2,000 -
    Engine Model Cat C9.3 Cat® C9.3 Cat 7.1 Cat C27
    Bore 4.5 in 4.5 in 4.1 in 5.4 in
    Emissions U.S. EPA Tier 4 Final/EU Stage V U.S. EPA Tier 4 Final/EU Stage V U.S. EPA Tier 4 Final/EU Stage V - U.S. EPA Tier 3/EU Stage IIIA Tier 4 Final/Stage IV or Equivalent to Tier 2/Stage II
    Displacement 567.5 in³ 567.5 in³ 427.8 in³ 1648 in³
    Stroke 5.9 in 5.9 in 5.3 in 6 in
    Number of Cylinders 6 6 6 12
    Torque Rise - ISO 9294 44% - 42% -
    Net Power Range (Tier 4) - 200 hp - -
    Speed at Rated Power - 2,000 rpm - -
    VHP Plus - Gear - Net Power - Forward 2nd - 210 hp - -
    VHP Plus - Gear - Net Power - Forward 3rd - 220 hp - -
    VHP Plus - Gear - Net Power - Forward 6th - 241 hp - -
    VHP Plus - Gear - Net Power - Forward 4th - 231 hp - -
    VHP Plus Range - Net - 149-188 kW (200-252 hp) - -
    VHP Plus - Gear - Net Power - Forward 5th - 236 hp - -
    VHP Plus - Gear - Net Power - Reverse 1st - 200 hp - -
    VHP Plus - Gear - Net Power - Forward 1st - 200 hp - -
    VHP Plus - Gear - Net Power - Reverse 2nd - 210 hp - -
    Maximum Torque - VHP Plus - 920 lb/ft - -
    VHP Plus Range - Net - Metric - 149-188 kW (202-255 hp) - -
    Base Power (1st Gear) - Net - Metric - 202 hp - -
    VHP Plus - Gear - Net Power - Forward 7th - 247 hp - -
    Torque Rise - 39% - -
    VHP Plus - Gear - Net Power - Reverse 3rd-6th - 220 hp - -
    High Ambient - Fan Speed - Standard - 1,400 rpm - -
    VHP Plus - Gear - Net Power - Forward 8th - 252 hp - -
    Derating Altitude - 10000 ft 9842.5 ft -
    High Ambient - Fan Speed - Maximum - 1,550 rpm - -
    High Ambient - Fan Speed - Minimum - 500 rpm - -
    High - Ambient Capability - 122 °F - -
    Note (2) - - Net power advertised is the power available at rated speed of 2,000 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator. Optimized VHP Plus is standard for the 24.
    Maximum Torque - ISO 9249 - - 606 lb/ft -
    Net Power Range (Tier 3) - - 130 hp -
    Note (3) - - Power as declared per ISO 14396 Net power advertised is the power available at rated speed of 1,800 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator.
    Maximum Torque - AWD On - - 611 lb/ft -
    Note (1) - - Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 Standards in effect at the time of manufacture." Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 Standards in effect at the time of manufacture.
    Derating Altitude (AWD) - - 5499 ft -
    All-Wheel Drive Net Power Range (Tier 4) - - 174 kW -
    Note (4) - - - Power as declared per ISO 14396. Rated rpm 1,800 (561 hp)

    Weights
    Operating Weight - Typically Equipped 44613 lb 43950 lb 35067 lb 165314 lb
    Gross Vehicle Weight - Maximum - Front Axle - 17075 lb - -
    Gross Vehicle Weight - Maximum - Rear Axle - 38069 lb - -
    Operating Weight - Typically Equipped - Front Axle - 12549 lb - -
    Operating Weight - Typically Equipped - Rear Axle - 31401 lb - -
    Gross Vehicle Weight - Base - Front Axle - 9601 lb - -
    Gross Vehicle Weight - Base - Rear Axle - 28590 lb - -
    Gross Vehicle Weight - Maximum - Total - 55144 lb - -
    Gross Vehicle Weight - Base - Total - 38191 lb - -
    Operating Weight - Typically Equipped - Total - 43950 lb - -

    Moldboard
    Blade Width 12 ft 12 ft 12 ft 24 ft
    Cutting Edge 6 in - 6 in -
    Arc Radius 16.3 in 16.3 in 16.3 in -
    Throat Clearance 6.5 in 6.5 in 4.1 in -
    End Bit 6 in - 6 in -
    Moldboard - Height - 24 in - -
    Moldboard - Thickness - 0.87 in - -
    Cutting Edge Width - 6 in - -
    Cutting Edge Thickness - 0.6 in - -
    End Bit - Width - 6 in - -
    End Bit - Thickness - 0.6 in - -
    Blade Pull - Base GVW - 25732 lb - -
    Blade Pull - Maximum GVW - 34262 lb - -
    Blade Down Pressure - Base GVW - 16480 lb - -
    Blade Down Pressure - Maximum GVW - 29308 lb - -
    Moldboard - Blade Width - 12 ft - -
    Blade Height - - 24 in 40 in

    Air Conditioning System
    Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. - If equipped with R134a (Global Warming Potential = 1430), the system con The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. - If equipped with R134a (Global Warming Potential = 1430), the system con The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas.

    Dimensions
    Basic Blade Width 140 in - 12 ft -
    Length of Machine* 397.6 in - 387 in -
    Width 97.6 in - 102 in -
    Note *Typically equipped with push block and ripper. - *Typically equipped with push block and ripper. -
    Maximum Height 132 in - 136.4 in -
    Height - Top of Cab - 130 in - -
    Length - Counterweight to Ripper - 399 in - -
    Width - Outside Front Tires - 98.9 in - -
    Length - Front Axle to Mid Tandem - 241 in - -
    Length - Front Tire to Rear of Machine - 351 in - -
    Length - Front Axle to Moldboard - 100 in - -
    Length - Between Tandem Axles - 60 in - -
    Width - Outside Rear Tires - 98.9 in - -
    Width - Tire Center Lines - 84.3 in - -
    Height - Front Axle Center - 23.5 in - -
    Height - Exhaust Stack - 128 in - -
    Height - Top of Cylinders - 120 in - -
    Ground Clearance - Rear Axle - 13.3 in - -
    Width All Wheel Drive (AWD) - - 2551 mm -

    Service Refill
    Hydraulic System 14.5 gal (US) - - -
    Engine Crankcase 7.9 gal (US) - - -
    Circle Drive 1.8 gal (US) - - -
    Fuel Tank 100 gal (US) - - -
    Front Wheel Spindle Bearing - Each 0.13 gal (US) - - -
    Fuel Capacity - 104 gal (US) - -
    Cooling System - 15 gal (US) - -
    Hydraulic System - Total - 26.4 gal (US) - -
    Hydraulic System - Tank - 16.9 gal (US) - -
    Diesel Exhaust Fluid - 5.8 gal (US) - -
    Transmission - Differential - Final Drives - 18.5 gal (US) - -
    Engine Oil - 7.9 gal (US) - -
    Tandem Housing - Each - 20 gal (US) - -
    Front Wheel Spindle Bearing Housing - 0.13 gal (US) - -
    Circle Drive Housing - 1.8 gal (US) - -

    Machine Weight
    Note *Typically equipped with push block and ripper. - - -
    All-Wheel Drive (AWD) Weight 44613 lb - - -
    Lever/Steering Wheel All-Wheel drive (AWD) Weight* Tier 4 - - 36731 lb -
    Note (1) - - *Typically equipped includes 4267 mm (14 ft) plus blade, tires, push plate, ripper, bottom guard, operator, and full fluids. -
    Joystick Weight* Tier 4 - - 35358 lb -
    Lever/Steering Wheel Weight* Tier 4 - - 35067 lb -
    Joystick All-Wheel Drive (AWD) Weight* Tier 4 - - 36846 lb -
    Weight* - - - 161695 lb

    Blade Range
    Maximum Lift Above Ground 18.9 in 18.9 in 16.1 in 16.1 in
    Maximum Depth of Cut 28.9 in 28.1 in 30.5 in 21.7 in
    Circle Centershift - Right - 28.7 in - -
    Circle Centershift - Left - 27.4 in - -
    Moldboard Sideshift - Right - 26 in - -
    Moldboard Sideshift - Left - 20.1 in - -
    Maximum Blade Position Angle - 90° - -
    Blade Tip Range - Forward - 40° - -
    Blade Tip Range - Backward - 5° - -
    Maximum Shoulder Reach Outside of Tires - Right - 77.9 in - -
    Maximum Shoulder Reach Outside of Tires - Left - 70.5 in - -
    Blade Tip Range Forward - - 40 -
    Maximum Shoulder Reach Right - - 76 in -
    Moldboard Side Shift Right - - 26.1 in -
    Maximum Shoulder Reach Left - - 69.4 in -
    Moldboard Side Shift Left - - 20.1 in -
    Circle Center Shift Left - - 26 in -
    Blade Tip Range Backward - - 5 -
    Circle Center Shift Right - - 26 in -

    Operating Specifications
    Top Speed - Forward - 29 mile/h - -
    Top Speed - Reverse - 23 mile/h - -
    Turning Radius - Outside Front Tires - 25.59 ft - -
    Steering Range - Left/Right - 50° - -
    Articulation Angle - Left/Right - 20° - -
    Forward - 1st - 2.5 mile/h - -
    Forward - 2nd - 3.4 mile/h - -
    Forward - 3rd - 5 mile/h - -
    Forward - 4th - 6.9 mile/h - -
    Forward - 5th - 10.6 mile/h - -
    Forward - 6th - 14.5 mile/h - -
    Forward - 7th - 19.9 mile/h - -
    Forward - 8th - 29 mile/h - -
    Reverse - 1st - 2 mile/h - -
    Reverse - 2nd - 3.7 mile/h - -
    Reverse - 3rd - 5.4 mile/h - -
    Reverse - 4th - 8.4 mile/h - -
    Reverse - 5th - 15.7 mile/h - -
    Reverse - 6th - 23 mile/h - -

    Power Train
    Forward/Reverse Gears - 8 Forward/6 Reverse - -
    Transmission - APECS, Direct Drive, Powershift - -
    Brakes - Service - Multiple Oil Disc - -
    Brakes - Service - Surface Area - 3565 in² - -
    Brakes - Parking - Multiple Oil Disc - -
    Brakes - Secondary - Dual Circuit - -

    Hydraulic System
    Circuit Type - Parallel - -
    Pump Type - Variable Piston - -
    Pump Output - 55.7 gpm - -
    Maximum System Pressure - 3500 psi - -
    Reservoir Tank Capacity - 16.9 gal (US) - -
    Standby Pressure - 885 psi - -

    Frame
    Drawbar - Width - 3 in - -
    Circle - Diameter - 60.2 in - -
    Circle - Blade Beam Thickness - 1.6 in - -
    Drawbar - Height - 6 in - -
    Front Frame Structure - Width - 12 in - -
    Front Frame Structure - Height - 12.6 in - -
    Circle - Height - 5.4 in - -
    Drawbar - Thickness - 0.5 in - -
    Front-Top/Bottom Plate - Width - 12 in - -
    Front-Top/Bottom Plate - Thickness - 0.87 in - -
    Front Axle - Height to Center - 23.5 in - -
    Front Axle - Wheel Lean - Left/Right - 18° - -
    Front Axle - Total Oscillation per Side - 32° - -

    Ripper
    Ripping Depth - Maximum - 16.8 in - -
    Ripper Shank Holder Spacing - 21 in - -
    Ripper Shank Holders - 5 - -
    Penetration Force - 20812 lb - -
    Pry-Out Force - 27794 lb - -
    Machine Length Increase, Beam Raised - 40.6 in - -

    Scarifier
    Rear - Scarifying Depth, Maximum - 16.8 in - -
    Front, V-Type, 5 or 11 Tooth - Scarifier Shank Holder Spacing - 4.6 in - -
    Mid, V-Type - Scarifier Shank Holder Spacing - 4.6 in - -
    Mid, V-Type - Scarifier Shank Holders - 11 - -
    Front, V-Type, 5 or 11 Tooth - Scarifier Shank Holders - 5 or 11 - -
    Front, V-Type, 5 or 11 Tooth - Working Width - 40.6 in - -
    Front, V-Type - Working Width - 47.4 in - -
    Front, V-Type, 5 or 11 Tooth - Scarifying Depth, Maximum - 18.4 in - -
    Mid, V-Type - Scarifying Depth, Maximum - 11.5 in - -
    Mid, V-Type - Working Width - 46.6 in - -
    Rear - Working Width - 84 in - -
    Rear - Scarifier Shank Holders - 9 - -
    Rear - Scarifier Shank Holder Spacing - 10.5 in - -

    Standards
    Brakes - ISO 3450 - -
    Steering - ISO 5010 - -
    ROPS/FOPS - ISO 3471/ISO 3449 - -
    Sound - ISO 6394; ISO 6395 - -

    Tandems
    Height - 19.9 in - -
    Width - 7.9 in - -
    Sidewall Thickness - Inner - 0.63 in - -
    Sidewall Thickness - Outer - 0.71 in - -
    Drive Chain Pitch - 2 in - -
    Wheel Axle Spacing - 60 in - -
    Tandem Oscillation - Front Up - 15° - -
    Tandem Oscillation - Front Down - 25° - -

    Service Refill Capacities
    Transmission and Differential - - 9 gal (US) -
    Circle Drive - - 1.8 gal (US) -
    Fuel Tank - - 65 gal (US) -
    Cooling System - - 14 gal (US) -
    Engine Crankcase - - 4.8 gal (US) -
    Diesel Exhaust Fluid Tank (Tier 4 Only) - - 5 gal (US) -
    Hydraulic System - - 25.6 gal (US) -
    Add a Similar Product: